3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-07 05:54:05 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

docs : make modifications to all md files to make them compatible with mkdocs

Browse source 
all markdown files must have a single H1 heading at the top.

Signed-off-by: Damien Martin <damlobster@gmail.com>

Update CNAME
This commit is contained in:
Damien 2021-07-22 00:40:40 +02:00 • committed by KevinOConnor
parent 7e88f9220c
commit cff61605fb
44 changed files with 565 additions and 536 deletions
Download patch file Download diff file Expand all files Collapse all files

10
docs/Manual_Level.md
View file

@ -1,7 +1,9 @@
# Manual leveling
This document describes tools for calibrating a Z endstop and for
performing adjustments to bed leveling screws.
# Calibrating a Z endstop
## Calibrating a Z endstop
An accurate Z endstop position is critical to obtaining high quality
prints.
@ -47,7 +49,7 @@ location of the endstop is in a convenient location, one can make any
further adjustments by running Z_ENDSTOP_CALIBRATE or by manually
updating the Z position_endstop in the configuration file.
# Adjusting bed leveling screws
## Adjusting bed leveling screws
The secret to getting good bed leveling with bed leveling screws is to
utilize the printer's high precision motion system during the bed
@ -101,7 +103,7 @@ This system works best when the printer has a flat printing surface
(such as glass) and has straight rails. Upon successful completion of
the bed leveling tool the bed should be ready for printing.
## Fine grained bed screw adjustments
### Fine grained bed screw adjustments
If the printer uses three bed screws and all three screws are under
the bed, then it may be possible to perform a second "high precision"
@ -138,7 +140,7 @@ once those are accepted, it will prompt for fine adjustments at the
additional locations. Continue to use `ACCEPT` and `ADJUSTED` at each
position.
# Adjusting bed leveling screws using the bed probe
## Adjusting bed leveling screws using the bed probe
This is another way to calibrate the bed level using the bed probe. To
use it you must have a Z probe (BL Touch, Inductive sensor, etc).