3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-07-18 20:28:10 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

heater: Added config for heater PWM cycle time.

Browse source 
Added the pwm_cycle_time option for heater config sections.  Defaults
to previous value of 0.100 seconds, but may be reduced to shorter times
at the expense of MCU workload and possible MOSFET heating, depending on
controller design.  Some printers that need bed PID to be enabled,
notably the Felixprinters series, are known to benefit from shorter
cycle times, as the default 10hz rate results in excessive voltage
supply droop.

While this option can be used on extruder heaters as well, there
is not expected to be any particular benefit from doing so unless
the extruder heater presents a particularly large load.

Signed-off-by: Andy Silverman <andrewsi@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Andy Silverman 2017-12-30 15:43:03 -08:00 • committed by Kevin O'Connor
parent 9fc5506c83
commit b22a81cd34
2 changed files with 8 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

5
klippy/heater.py
View file

@ -95,7 +95,6 @@ Sensors = {
SAMPLE_TIME = 0.001
SAMPLE_COUNT = 8
REPORT_TIME = 0.300
PWM_CYCLE_TIME = 0.100
MAX_HEAT_TIME = 5.0
AMBIENT_TEMP = 25.
PID_PARAM_BASE = 255.
@ -125,7 +124,9 @@ class PrinterHeater:
self.mcu_pwm = pins.setup_pin(printer, 'digital_out', heater_pin)
else:
self.mcu_pwm = pins.setup_pin(printer, 'pwm', heater_pin)
self.mcu_pwm.setup_cycle_time(PWM_CYCLE_TIME)
pwm_cycle_time = config.getfloat(
'pwm_cycle_time', 0.100, above=0., maxval=REPORT_TIME)
self.mcu_pwm.setup_cycle_time(pwm_cycle_time)
self.mcu_pwm.setup_max_duration(MAX_HEAT_TIME)
self.mcu_adc = pins.setup_pin(printer, 'adc', config.get('sensor_pin'))
adc_range = [self.sensor.calc_adc(self.min_temp),