3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-07-24 23:24:01 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

docs: Rename Documents

Browse source 
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
This commit is contained in:
Yifei Ding 2021-11-20 23:23:56 -08:00 • committed by Kevin O'Connor
parent 85667649d1
commit a1af78cb83
10 changed files with 15 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

4
docs/G-Codes.md
View file

@ -663,7 +663,7 @@ retraction required.
The following commands are available when the
[skew_correction config section](Config_Reference.md#skew_correction)
is enabled (also see the [skew correction guide](skew_correction.md)):
is enabled (also see the [Skew Correction](Skew_Correction.md) guide):
- `SET_SKEW [XY=<ac_length,bd_length,ad_length>] [XZ=<ac,bd,ad>]
[YZ=<ac,bd,ad>] [CLEAR=<0|1>]`: Configures the [skew_correction]
module with measurements (in mm) taken from a calibration print.
@ -678,7 +678,7 @@ is enabled (also see the [skew correction guide](skew_correction.md)):
degrees) based on a measured print. This can be useful for
determining the printer's current skew after correction has been
applied. It may also be useful before correction is applied to
determine if skew correction is necessary. See skew_correction.md
determine if skew correction is necessary. See [Skew Correction](Skew_Correction.md)
for details on skew calibration objects and measurements.
- `SKEW_PROFILE [LOAD=<name>] [SAVE=<name>] [REMOVE=<name>]`: Profile
management for skew_correction. LOAD will restore skew state from