3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-09 14:55:09 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

docs: Avoid using .. in markdown links

Browse source 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-04-14 21:12:21 -04:00
parent 9cb21de68e
commit 8bc9f39c58
7 changed files with 46 additions and 37 deletions
Download patch file Download diff file Expand all files Collapse all files

43
docs/FAQ.md
View file

@ -99,12 +99,13 @@ and make sure FLASH_DEVICE is set correctly for your board (see the
However, if "make flash" just doesn't work for your board, then you
will need to manually flash. See if there is a config file in the
[config directory](../config) with specific instructions for flashing
the device. Also, check the board manufacturer's documentation to see
if it describes how to flash the device. Finally, on AVR devices, it
may be possible to manually flash the device using
[avrdude](http://www.nongnu.org/avrdude/) with custom command-line
parameters - see the avrdude documentation for further information.
[config directory](https://github.com/KevinOConnor/klipper/tree/master/config)
with specific instructions for flashing the device. Also, check the
board manufacturer's documentation to see if it describes how to flash
the device. Finally, on AVR devices, it may be possible to manually
flash the device using [avrdude](http://www.nongnu.org/avrdude/) with
custom command-line parameters - see the avrdude documentation for
further information.
### How do I change the serial baud rate?
@ -145,8 +146,8 @@ machines (the printer may move faster than OctoPrint can send movement
commands) when printing directly from OctoPrint. If you wish to run on
one one of these slower boards anyway, consider using the
"virtual_sdcard" feature (see
[config/example-extras.cfg](../config/example-extras.cfg) for details)
when printing.
[config/example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg)
for details) when printing.
For running on the Beaglebone, see the
[Beaglebone specific installation instructions](beaglebone.md).
@ -156,8 +157,8 @@ only requires Python running on a Linux (or similar)
computer. However, if you wish to run it on a different machine you
will need Linux admin knowledge to install the system prerequisites
for that particular machine. See the
[install-octopi.sh](../scripts/install-octopi.sh) script for further
information on the necessary Linux admin steps.
[install-octopi.sh](https://github.com/KevinOConnor/klipper/tree/master/scripts/install-octopi.sh)
script for further information on the necessary Linux admin steps.
### Can I run multiple instances of Klipper on the same host machine?
@ -176,9 +177,10 @@ own pseudo-tty. For example:
If you choose to do this, you will need to implement the necessary
start, stop, and installation scripts (if any). The
[install-octopi.sh](../scripts/install-octopi.sh) script and the
[klipper-start.sh](../scripts/klipper-start.sh) script may be useful
as examples.
[install-octopi.sh](https://github.com/KevinOConnor/klipper/tree/master/scripts/install-octopi.sh)
script and the
[klipper-start.sh](https://github.com/KevinOConnor/klipper/tree/master/scripts/klipper-start.sh)
script may be useful as examples.
### Do I have to use OctoPrint?
@ -213,8 +215,8 @@ process itself (or fundamentally does not have a homing process) then
consider using a homing_override section in the config file. If you
need to move a stepper for diagnostic or debugging purposes then
consider adding a force_move section to the config file. See
[example-extras.cfg](../config/example-extras.cfg) for further details
on these options.
[example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg)
for further details on these options.
### Why is the Z position_endstop set to 0.5 in the default configs?
@ -371,15 +373,16 @@ See the "config_digital_out" command in the
In addition, the micro-controller software is configured with a
minimum and maximum temperature range for each heater at startup (see
the min_temp and max_temp parameters in the
[example.cfg](../config/example.cfg) file for details). If the
micro-controller detects that the temperature is outside of that range
then it will also enter a "shutdown" state.
[example.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example.cfg)
file for details). If the micro-controller detects that the
temperature is outside of that range then it will also enter a
"shutdown" state.
Separately, the host software also implements code to check that
heaters and temperature sensors are functioning correctly. See the
"verify_heater" section of the
[example-extras.cfg](../config/example-extras.cfg) for further
details.
[example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg)
for further details.
### How do I convert a Marlin pin number to a Klipper pin name?