mirror of
https://github.com/Klipper3d/klipper.git
synced 2025-07-21 21:58:05 -06:00
Add STM32F103 port
Add a fully functional STM32F1 port, currently mostly targeting STM32F103 microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate is around 282K steps per second. This uses stm32flash to burn the firmware. The bootloader needs to be started by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader, unlike on Arduino. Signed-off-by: Grigori Goronzy <greg@kinoho.net>
This commit is contained in:
Grigori Goronzy
KevinOConnor
parent
e097b08520
commit
75d5737211
173 changed files with 267435 additions and 0 deletions
422
lib/cmsis-stm32f1/source/startup_stm32f100xb.s
Normal file
422
lib/cmsis-stm32f1/source/startup_stm32f100xb.s
Normal file
|
|
@ -0,0 +1,422 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f100xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F100xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word CEC_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
|
||||
STM32F10xB Value Line devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
464
lib/cmsis-stm32f1/source/startup_stm32f100xe.s
Normal file
464
lib/cmsis-stm32f1/source/startup_stm32f100xe.s
Normal file
|
|
@ -0,0 +1,464 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f100xe.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F100xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word CEC_IRQHandler
|
||||
.word TIM12_IRQHandler
|
||||
.word TIM13_IRQHandler
|
||||
.word TIM14_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density Value line devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM12_IRQHandler
|
||||
.thumb_set TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM13_IRQHandler
|
||||
.thumb_set TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM14_IRQHandler
|
||||
.thumb_set TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
337
lib/cmsis-stm32f1/source/startup_stm32f101x6.s
Normal file
337
lib/cmsis-stm32f1/source/startup_stm32f101x6.s
Normal file
|
|
@ -0,0 +1,337 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101x6.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F101x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
353
lib/cmsis-stm32f1/source/startup_stm32f101xb.s
Normal file
353
lib/cmsis-stm32f1/source/startup_stm32f101xb.s
Normal file
|
|
@ -0,0 +1,353 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F101xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Medium Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
438
lib/cmsis-stm32f1/source/startup_stm32f101xe.s
Normal file
438
lib/cmsis-stm32f1/source/startup_stm32f101xe.s
Normal file
|
|
@ -0,0 +1,438 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xe.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F101xE Value Line Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FSMC_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
454
lib/cmsis-stm32f1/source/startup_stm32f101xg.s
Normal file
454
lib/cmsis-stm32f1/source/startup_stm32f101xg.s
Normal file
|
|
@ -0,0 +1,454 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xg.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F101xG Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word TIM12_IRQHandler
|
||||
.word TIM13_IRQHandler
|
||||
.word TIM14_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word FSMC_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x XL-Density devices. */
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM12_IRQHandler
|
||||
.thumb_set TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM13_IRQHandler
|
||||
.thumb_set TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM14_IRQHandler
|
||||
.thumb_set TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
345
lib/cmsis-stm32f1/source/startup_stm32f102x6.s
Normal file
345
lib/cmsis-stm32f1/source/startup_stm32f102x6.s
Normal file
|
|
@ -0,0 +1,345 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f102x6.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F102x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
361
lib/cmsis-stm32f1/source/startup_stm32f102xb.s
Normal file
361
lib/cmsis-stm32f1/source/startup_stm32f102xb.s
Normal file
|
|
@ -0,0 +1,361 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f102xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F102xB Value Line Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Medium Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
363
lib/cmsis-stm32f1/source/startup_stm32f103x6.s
Normal file
363
lib/cmsis-stm32f1/source/startup_stm32f103x6.s
Normal file
|
|
@ -0,0 +1,363 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103x6.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F103x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
379
lib/cmsis-stm32f1/source/startup_stm32f103xb.s
Normal file
379
lib/cmsis-stm32f1/source/startup_stm32f103xb.s
Normal file
|
|
@ -0,0 +1,379 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F103xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Medium Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
485
lib/cmsis-stm32f1/source/startup_stm32f103xe.s
Normal file
485
lib/cmsis-stm32f1/source/startup_stm32f103xe.s
Normal file
|
|
@ -0,0 +1,485 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xe.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F103xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Configure external SRAM mounted on STM3210E-EVAL board
|
||||
* to be used as data memory (optional, to be enabled by user)
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
482
lib/cmsis-stm32f1/source/startup_stm32f103xg.s
Normal file
482
lib/cmsis-stm32f1/source/startup_stm32f103xg.s
Normal file
|
|
@ -0,0 +1,482 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xb.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F103xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM9_IRQHandler
|
||||
.word TIM1_UP_TIM10_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_TIM12_IRQHandler
|
||||
.word TIM8_UP_TIM13_IRQHandler
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x XL-Density devices. */
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
476
lib/cmsis-stm32f1/source/startup_stm32f105xc.s
Normal file
476
lib/cmsis-stm32f1/source/startup_stm32f105xc.s
Normal file
|
|
@ -0,0 +1,476 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f105xc.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F105xC Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word CAN1_TX_IRQHandler
|
||||
.word CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word OTG_FS_WKUP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word CAN2_TX_IRQHandler
|
||||
.word CAN2_RX0_IRQHandler
|
||||
.word CAN2_RX1_IRQHandler
|
||||
.word CAN2_SCE_IRQHandler
|
||||
.word OTG_FS_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x Connectivity line Devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler ,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
487
lib/cmsis-stm32f1/source/startup_stm32f107xc.s
Normal file
487
lib/cmsis-stm32f1/source/startup_stm32f107xc.s
Normal file
|
|
@ -0,0 +1,487 @@
|
|||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f107xc.s
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief STM32F107xC Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word CAN1_TX_IRQHandler
|
||||
.word CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word OTG_FS_WKUP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word ETH_IRQHandler
|
||||
.word ETH_WKUP_IRQHandler
|
||||
.word CAN2_TX_IRQHandler
|
||||
.word CAN2_RX0_IRQHandler
|
||||
.word CAN2_RX1_IRQHandler
|
||||
.word CAN2_SCE_IRQHandler
|
||||
.word OTG_FS_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x Connectivity line Devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler ,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
112
lib/cmsis-stm32f1/source/stm32f1.ld
Normal file
112
lib/cmsis-stm32f1/source/stm32f1.ld
Normal file
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
Generic Cortex-M linker script
|
||||
Public Domain
|
||||
*/
|
||||
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
}
|
||||
|
||||
/* highest address of the user mode stack */
|
||||
_estack = 0x20005000;
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
/* Interrupt vector table */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector))
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* Program code and constant data */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text)
|
||||
*(.text*)
|
||||
*(.rodata)
|
||||
*(.rodata*)
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
. = ALIGN(4);
|
||||
_etext = .;
|
||||
} >FLASH
|
||||
|
||||
/* Exception handling */
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
/* Static constructor initialization (C++) */
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
|
||||
/* Initialized data, needs to be handled by startup code */
|
||||
_sidata = .;
|
||||
.data : AT (_sidata)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = . ;
|
||||
_data = . ;
|
||||
*(.data)
|
||||
*(.data*)
|
||||
*(.RAMtext)
|
||||
. = ALIGN(4);
|
||||
_edata = . ;
|
||||
} >RAM
|
||||
|
||||
/* Uninitialized data */
|
||||
.bss (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sbss = .;
|
||||
__bss_start__ = .;
|
||||
_bss = .;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
_ebss = .;
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* Pointers to end of data for dynamic memory management */
|
||||
PROVIDE (end = _ebss);
|
||||
PROVIDE (_end = _ebss);
|
||||
|
||||
/* Remove debugging from standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a (*)
|
||||
libm.a (*)
|
||||
libgcc.a (*)
|
||||
}
|
||||
}
|
||||
448
lib/cmsis-stm32f1/source/system_stm32f1xx.c
Normal file
448
lib/cmsis-stm32f1/source/system_stm32f1xx.c
Normal file
|
|
@ -0,0 +1,448 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f1xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.2.0
|
||||
* @date 31-March-2017
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* factors, AHB/APBx prescalers and Flash settings).
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f1xx_xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
|
||||
* the product used), refer to "HSE_VALUE".
|
||||
* When HSE is used as system clock source, directly or through PLL, and you
|
||||
* are using different crystal you have to adapt the HSE value to your own
|
||||
* configuration.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/*!< Uncomment the following line if you need to use external SRAM */
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Clock Definitions
|
||||
*******************************************************************************/
|
||||
#if defined(STM32F100xB) ||defined(STM32F100xE)
|
||||
uint32_t SystemCoreClock = 24000000U; /*!< System Clock Frequency (Core Clock) */
|
||||
#else /*!< HSI Selected as System Clock source */
|
||||
uint32_t SystemCoreClock = 72000000U; /*!< System Clock Frequency (Core Clock) */
|
||||
#endif
|
||||
|
||||
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @note This function should be used only after reset.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
__attribute__((used)) void SystemInit (void)
|
||||
{
|
||||
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= 0x00000001U;
|
||||
|
||||
/* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
RCC->CFGR &= 0xF8FF0000U;
|
||||
#else
|
||||
RCC->CFGR &= 0xF0FF0000U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= 0xFEF6FFFFU;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= 0xFFFBFFFFU;
|
||||
|
||||
/* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
|
||||
RCC->CFGR &= 0xFF80FFFFU;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
/* Reset PLL2ON and PLL3ON bits */
|
||||
RCC->CR &= 0xEBFFFFFFU;
|
||||
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x00FF0000U;
|
||||
|
||||
/* Reset CFGR2 register */
|
||||
RCC->CFGR2 = 0x00000000U;
|
||||
#elif defined(STM32F100xB) || defined(STM32F100xE)
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x009F0000U;
|
||||
|
||||
/* Reset CFGR2 register */
|
||||
RCC->CFGR2 = 0x00000000U;
|
||||
#else
|
||||
/* Disable all interrupts and clear pending bits */
|
||||
RCC->CIR = 0x009F0000U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif
|
||||
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
|
||||
* that HSE_VALUE is same as the real frequency of the crystal used.
|
||||
* Otherwise, this function may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
uint32_t prediv1factor = 0U;
|
||||
#endif /* STM32F100xB or STM32F100xE */
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00U: /* HSI used as system clock */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04U: /* HSE used as system clock */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08U: /* PLL used as system clock */
|
||||
|
||||
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
|
||||
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
pllmull = ( pllmull >> 18U) + 2U;
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
#else
|
||||
/* HSE selected as PLL clock entry */
|
||||
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
|
||||
{/* HSE oscillator clock divided by 2 */
|
||||
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#else
|
||||
pllmull = pllmull >> 18U;
|
||||
|
||||
if (pllmull != 0x0DU)
|
||||
{
|
||||
pllmull += 2U;
|
||||
}
|
||||
else
|
||||
{ /* PLL multiplication factor = PLL input clock * 6.5 */
|
||||
pllmull = 13U / 2U;
|
||||
}
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PREDIV1 selected as PLL clock entry */
|
||||
|
||||
/* Get PREDIV1 clock source and division factor */
|
||||
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
|
||||
if (prediv1source == 0U)
|
||||
{
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PLL2 clock selected as PREDIV1 clock entry */
|
||||
|
||||
/* Get PREDIV2 division factor and PLL2 multiplication factor */
|
||||
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
|
||||
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
|
||||
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
|
||||
}
|
||||
}
|
||||
#endif /* STM32F105xC */
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Compute HCLK clock frequency ----------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
|
||||
* This function configures the external SRAM mounted on STM3210E-EVAL
|
||||
* board (STM32 High density devices). This SRAM will be used as program
|
||||
* data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmpreg;
|
||||
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
|
||||
required, then adjust the Register Addresses */
|
||||
|
||||
/* Enable FSMC clock */
|
||||
RCC->AHBENR = 0x00000114U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
|
||||
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
||||
RCC->APB2ENR = 0x000001E0U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
|
||||
|
||||
(void)(tmpreg);
|
||||
|
||||
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
||||
/*---------------- SRAM Address lines configuration -------------------------*/
|
||||
/*---------------- NOE and NWE configuration --------------------------------*/
|
||||
/*---------------- NE3 configuration ----------------------------------------*/
|
||||
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
||||
|
||||
GPIOD->CRL = 0x44BB44BBU;
|
||||
GPIOD->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOE->CRL = 0xB44444BBU;
|
||||
GPIOE->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOF->CRL = 0x44BBBBBBU;
|
||||
GPIOF->CRH = 0xBBBB4444U;
|
||||
|
||||
GPIOG->CRL = 0x44BBBBBBU;
|
||||
GPIOG->CRH = 0x444B4B44U;
|
||||
|
||||
/*---------------- FSMC Configuration ---------------------------------------*/
|
||||
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
|
||||
|
||||
FSMC_Bank1->BTCR[4U] = 0x00001091U;
|
||||
FSMC_Bank1->BTCR[5U] = 0x00110212U;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Loading…
Add table
Add a link
Reference in a new issue