Add STM32F103 port

Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>

lib/cmsis-stm32f1/cmsis-include/core_cmFunc.h

@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */

lib/cmsis-stm32f1/cmsis-include/core_cmInstr.h

@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */

lib/cmsis-stm32f1/include/stm32f1xx.h

@@ -0,0 +1,238 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx.h
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32F1xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx
+  * @{
+  */
+    
+#ifndef __STM32F1XX_H
+#define __STM32F1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F1)
+#define STM32F1
+#endif /* STM32F1 */
+
+/* Uncomment the line below according to the target STM32L device used in your 
+   application 
+  */
+
+#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
+    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
+    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
+  /* #define STM32F100xB  */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
+  /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
+  /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
+  /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
+  /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+  /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
+  /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
+  /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
+  /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
+  /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
+  /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
+  /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
+  /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
+  /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+  
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V4.2.0
+  */
+#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
+#define __STM32F1_CMSIS_VERSION_SUB1   (0x02) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F1_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F100xB)
+  #include "stm32f100xb.h"
+#elif defined(STM32F100xE)
+  #include "stm32f100xe.h"
+#elif defined(STM32F101x6)
+  #include "stm32f101x6.h"
+#elif defined(STM32F101xB)
+  #include "stm32f101xb.h"
+#elif defined(STM32F101xE)
+  #include "stm32f101xe.h"
+#elif defined(STM32F101xG)
+  #include "stm32f101xg.h"
+#elif defined(STM32F102x6)
+  #include "stm32f102x6.h"
+#elif defined(STM32F102xB)
+  #include "stm32f102xb.h"
+#elif defined(STM32F103x6)
+  #include "stm32f103x6.h"
+#elif defined(STM32F103xB)
+  #include "stm32f103xb.h"
+#elif defined(STM32F103xE)
+  #include "stm32f103xe.h"
+#elif defined(STM32F103xG)
+  #include "stm32f103xg.h"
+#elif defined(STM32F105xC)
+  #include "stm32f105xc.h"
+#elif defined(STM32F107xC)
+  #include "stm32f107xc.h"
+#else
+ #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/include/system_stm32f1xx.h

@@ -0,0 +1,116 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t  AHBPrescTable[16U];  /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8U];   /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f100xb.s

@@ -0,0 +1,422 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f100xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F100xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_TIM15_IRQHandler
+  .word TIM1_UP_TIM16_IRQHandler
+  .word TIM1_TRG_COM_TIM17_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word CEC_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM6_DAC_IRQHandler
+  .word TIM7_IRQHandler  
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                            STM32F10xB Value Line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+  
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+  
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+  
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+  
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

lib/cmsis-stm32f1/source/startup_stm32f100xe.s

@@ -0,0 +1,464 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f100xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F100xE Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_TIM15_IRQHandler
+  .word TIM1_UP_TIM16_IRQHandler
+  .word TIM1_TRG_COM_TIM17_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word CEC_IRQHandler
+  .word TIM12_IRQHandler
+  .word TIM13_IRQHandler
+  .word TIM14_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_DAC_IRQHandler
+  .word TIM7_IRQHandler  
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x High Density Value line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+  
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler 
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler  
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

lib/cmsis-stm32f1/source/startup_stm32f101x6.s

@@ -0,0 +1,337 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f101xb.s

@@ -0,0 +1,353 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

lib/cmsis-stm32f1/source/startup_stm32f101xe.s

@@ -0,0 +1,438 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xE Value Line Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word FSMC_IRQHandler
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM       /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f101xg.s

@@ -0,0 +1,454 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xg.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xG Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None       
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  EXTI9_5_IRQHandler
+  .word  TIM9_IRQHandler
+  .word  TIM10_IRQHandler
+  .word  TIM11_IRQHandler
+  .word  0
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTC_Alarm_IRQHandler
+  .word 0
+  .word TIM12_IRQHandler
+  .word TIM13_IRQHandler
+  .word TIM14_IRQHandler
+  .word 0
+  .word 0
+  .word  FSMC_IRQHandler
+  .word 0
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM9_IRQHandler
+  .thumb_set TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM10_IRQHandler
+  .thumb_set TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM11_IRQHandler
+  .thumb_set TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f102x6.s

@@ -0,0 +1,345 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f102x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F102x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word USB_HP_IRQHandler
+  .word USB_LP_IRQHandler
+  .word 0 
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak USB_HP_IRQHandler
+  .thumb_set USB_HP_IRQHandler,Default_Handler
+
+  .weak USB_LP_IRQHandler
+  .thumb_set USB_LP_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f102xb.s

@@ -0,0 +1,361 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f102xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F102xB Value Line Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word USB_HP_IRQHandler
+  .word USB_LP_IRQHandler
+  .word 0 
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak USB_HP_IRQHandler
+  .thumb_set USB_HP_IRQHandler,Default_Handler
+
+  .weak USB_LP_IRQHandler
+  .thumb_set USB_LP_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

lib/cmsis-stm32f1/source/startup_stm32f103x6.s

@@ -0,0 +1,363 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f103xb.s

@@ -0,0 +1,379 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

lib/cmsis-stm32f1/source/startup_stm32f103xe.s

@@ -0,0 +1,485 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xE Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Configure external SRAM mounted on STM3210E-EVAL board
+  *                  to be used as data memory (optional, to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word TIM8_BRK_IRQHandler
+  .word TIM8_UP_IRQHandler
+  .word TIM8_TRG_COM_IRQHandler
+  .word TIM8_CC_IRQHandler
+  .word ADC3_IRQHandler
+  .word FSMC_IRQHandler
+  .word SDIO_IRQHandler
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM       /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak TIM8_BRK_IRQHandler
+  .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+  .weak TIM8_UP_IRQHandler
+  .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+  .weak TIM8_TRG_COM_IRQHandler
+  .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f103xg.s

@@ -0,0 +1,482 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None       
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  USB_HP_CAN1_TX_IRQHandler
+  .word  USB_LP_CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM9_IRQHandler
+  .word  TIM1_UP_TIM10_IRQHandler
+  .word  TIM1_TRG_COM_TIM11_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTC_Alarm_IRQHandler
+  .word  USBWakeUp_IRQHandler
+  .word  TIM8_BRK_TIM12_IRQHandler
+  .word  TIM8_UP_TIM13_IRQHandler
+  .word  TIM8_TRG_COM_TIM14_IRQHandler
+  .word  TIM8_CC_IRQHandler
+  .word  ADC3_IRQHandler
+  .word  FSMC_IRQHandler
+  .word  SDIO_IRQHandler
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM9_IRQHandler
+  .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM10_IRQHandler
+  .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM11_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak  TIM8_BRK_TIM12_IRQHandler
+  .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM8_UP_TIM13_IRQHandler
+  .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM8_TRG_COM_TIM14_IRQHandler
+  .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak  ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f105xc.s

@@ -0,0 +1,476 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f105xc.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F105xC Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word CAN1_TX_IRQHandler
+  .word CAN1_RX0_IRQHandler
+   .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word OTG_FS_WKUP_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word 0
+  .word 0
+  .word CAN2_TX_IRQHandler
+  .word CAN2_RX0_IRQHandler
+  .word CAN2_RX1_IRQHandler
+  .word CAN2_SCE_IRQHandler
+  .word OTG_FS_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM     /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak CAN1_TX_IRQHandler
+  .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+  .weak CAN1_RX0_IRQHandler
+  .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak OTG_FS_WKUP_IRQHandler
+  .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_IRQHandler
+  .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+  .weak CAN2_TX_IRQHandler
+  .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+  .weak CAN2_RX0_IRQHandler
+  .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+  .weak CAN2_RX1_IRQHandler
+  .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+  .weak CAN2_SCE_IRQHandler
+  .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+  .weak OTG_FS_IRQHandler
+  .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/startup_stm32f107xc.s

@@ -0,0 +1,487 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f107xc.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F107xC Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word CAN1_TX_IRQHandler
+  .word CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word OTG_FS_WKUP_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word ETH_IRQHandler
+  .word ETH_WKUP_IRQHandler
+  .word CAN2_TX_IRQHandler
+  .word CAN2_RX0_IRQHandler
+  .word CAN2_RX1_IRQHandler
+  .word CAN2_SCE_IRQHandler
+  .word OTG_FS_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM     /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  CAN1_TX_IRQHandler
+  .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX0_IRQHandler
+  .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_WKUP_IRQHandler
+  .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_IRQHandler
+  .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+  .weak  ETH_IRQHandler
+  .thumb_set ETH_IRQHandler,Default_Handler
+
+  .weak  ETH_WKUP_IRQHandler
+  .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+  .weak  CAN2_TX_IRQHandler
+  .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX0_IRQHandler
+  .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX1_IRQHandler
+  .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN2_SCE_IRQHandler
+  .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_IRQHandler
+  .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/cmsis-stm32f1/source/stm32f1.ld

@@ -0,0 +1,112 @@
+/*
+   Generic Cortex-M linker script
+   Public Domain
+*/
+
+ENTRY(Reset_Handler)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+  RAM  (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
+}
+
+/* highest address of the user mode stack */
+_estack = 0x20005000;
+
+SECTIONS
+{
+    /* Interrupt vector table */
+    .isr_vector :
+    {
+        . = ALIGN(4);
+        KEEP(*(.isr_vector))
+        . = ALIGN(4);
+    } >FLASH
+    
+    /* Program code and constant data */
+    .text :
+    {
+        . = ALIGN(4);
+        *(.text)
+        *(.text*)
+        *(.rodata)
+        *(.rodata*)
+        KEEP (*(.init))
+        KEEP (*(.fini))
+        . = ALIGN(4);
+        _etext = .;
+    } >FLASH
+
+    /* Exception handling */
+    .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+    .ARM : {
+        __exidx_start = .;
+        *(.ARM.exidx*)
+        __exidx_end = .;
+    } >FLASH
+
+    /* Static constructor initialization (C++) */
+    .preinit_array :
+    {
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP (*(.preinit_array*))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+    } >FLASH
+    .init_array :
+    {
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array*))
+        PROVIDE_HIDDEN (__init_array_end = .);
+    } >FLASH
+    .fini_array :
+    {
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP (*(SORT(.fini_array.*)))
+        KEEP (*(.fini_array*))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+    } >FLASH
+
+    
+    /* Initialized data, needs to be handled by startup code */
+    _sidata = .;
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        _sdata = . ;
+        _data = . ;
+        *(.data)
+        *(.data*)
+        *(.RAMtext)
+        . = ALIGN(4);
+        _edata = . ;
+    } >RAM
+    
+    /* Uninitialized data */
+    .bss (NOLOAD) :
+    {
+        . = ALIGN(4);
+        _sbss = .;
+        __bss_start__ = .;
+        _bss = .;
+        *(.bss)
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = .;
+        __bss_end__ = _ebss;
+    } >RAM
+
+    /* Pointers to end of data for dynamic memory management */
+    PROVIDE (end = _ebss);
+    PROVIDE (_end = _ebss);
+    
+    /* Remove debugging from standard libraries */
+    /DISCARD/ :
+    {
+        libc.a (*)
+        libm.a (*)
+        libgcc.a (*)
+    }
+}

lib/cmsis-stm32f1/source/system_stm32f1xx.c

@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#if defined(STM32F100xB) ||defined(STM32F100xE)
+  uint32_t SystemCoreClock         = 24000000U;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = 72000000U;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+__attribute__((used)) void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+  RCC->CFGR &= 0xF8FF0000U;
+#else
+  RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEBFFFFFFU;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+    
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/