3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-07 14:04:17 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

resonance_tester: Fix chips selection, add accel_per_hz selection (#6726)

Browse source 
Corrected issue where accelerometer names were incorrectly prefixed
with "adxl345", preventing the selection of other chip types when running TEST_RESONANCES.

Implemented support for selecting the `accel_per_hz` parameter when running TEST_RESONANCES.

docs: Update TEST_RESONANCES + SHAPER_CALIBRATE with missing parameters and bracket corrections

Signed-off-by: Maksim Bolgov <maksim8024@gmail.com>
This commit is contained in:
MRX8024 2024-11-13 02:55:32 +02:00 • committed by GitHub
parent 2af8d3f1d0
commit 6d1256ddcc
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
3 changed files with 16 additions and 14 deletions
Download patch file Download diff file Expand all files Collapse all files

4
docs/Config_Changes.md
View file

@ -8,6 +8,10 @@ All dates in this document are approximate.
## Changes
20241112: Option `CHIPS=<chip_name>` in `TEST_RESONANCES` and
`SHAPER_CALIBRATE` requires specifying the full name(s) of the accel
chip(s). For example, `adxl345 rpi` instead of short name - `rpi`.
20240912: `SET_PIN`, `SET_SERVO`, `SET_FAN_SPEED`, `M106`, and `M107`
commands are now collated. Previously, if many updates to the same
object were issued faster than the minimum scheduling time (typically

18
docs/G-Codes.md
View file

@ -1084,20 +1084,19 @@ is enabled (also see the
all enabled accelerometer chips.
#### TEST_RESONANCES
`TEST_RESONANCES AXIS=<axis> OUTPUT=<resonances,raw_data>
`TEST_RESONANCES AXIS=<axis> [OUTPUT=<resonances,raw_data>]
[NAME=<name>] [FREQ_START=<min_freq>] [FREQ_END=<max_freq>]
[HZ_PER_SEC=<hz_per_sec>] [CHIPS=<adxl345_chip_name>]
[POINT=x,y,z] [INPUT_SHAPING=[<0:1>]]`: Runs the resonance
[ACCEL_PER_HZ=<accel_per_hz>] [HZ_PER_SEC=<hz_per_sec>] [CHIPS=<chip_name>]
[POINT=x,y,z] [INPUT_SHAPING=<0:1>]`: Runs the resonance
test in all configured probe points for the requested "axis" and
measures the acceleration using the accelerometer chips configured for
the respective axis. "axis" can either be X or Y, or specify an
arbitrary direction as `AXIS=dx,dy`, where dx and dy are floating
point numbers defining a direction vector (e.g. `AXIS=X`, `AXIS=Y`, or
`AXIS=1,-1` to define a diagonal direction). Note that `AXIS=dx,dy`
and `AXIS=-dx,-dy` is equivalent. `adxl345_chip_name` can be one or
more configured adxl345 chip,delimited with comma, for example
`CHIPS="adxl345, adxl345 rpi"`. Note that `adxl345` can be omitted from
named adxl345 chips. If POINT is specified it will override the point(s)
and `AXIS=-dx,-dy` is equivalent. `chip_name` can be one or
more configured accel chips, delimited with comma, for example
`CHIPS="adxl345, adxl345 rpi"`. If POINT is specified it will override the point(s)
configured in `[resonance_tester]`. If `INPUT_SHAPING=0` or not set(default),
disables input shaping for the resonance testing, because
it is not valid to run the resonance testing with the input shaper
@ -1114,8 +1113,9 @@ frequency response is calculated (across all probe points) and written into
#### SHAPER_CALIBRATE
`SHAPER_CALIBRATE [AXIS=<axis>] [NAME=<name>] [FREQ_START=<min_freq>]
[FREQ_END=<max_freq>] [HZ_PER_SEC=<hz_per_sec>] [CHIPS=<adxl345_chip_name>]
[MAX_SMOOTHING=<max_smoothing>]`: Similarly to `TEST_RESONANCES`, runs
[FREQ_END=<max_freq>] [ACCEL_PER_HZ=<accel_per_hz>][HZ_PER_SEC=<hz_per_sec>]
[CHIPS=<chip_name>] [MAX_SMOOTHING=<max_smoothing>] [INPUT_SHAPING=<0:1>]`:
Similarly to `TEST_RESONANCES`, runs
the resonance test as configured, and tries to find the optimal
parameters for the input shaper for the requested axis (or both X and
Y axes if `AXIS` parameter is unset). If `MAX_SMOOTHING` is unset, its