display menu module for klipper

Signed-off-by: Janar Sööt <janar.soot@gmail.com>

klippy/extras/display/display.py

@@ -7,6 +7,7 @@
 # This file may be distributed under the terms of the GNU GPLv3 license.
 import logging
 import hd44780, st7920, uc1701, icons
+import menu
 
 LCD_chips = { 'st7920': st7920.ST7920, 'hd44780': hd44780.HD44780, 'uc1701' : uc1701.UC1701 }
 M73_TIMEOUT = 5.
@@ -17,6 +18,8 @@ class PrinterLCD:
         self.reactor = self.printer.get_reactor()
         self.lcd_chip = config.getchoice('lcd_type', LCD_chips)(config)
         self.lcd_type = config.get('lcd_type')
+        # menu
+        self.menu = menu.MenuManager(config, self.lcd_chip)
         # printer objects
         self.gcode = self.toolhead = self.sdcard = None
         self.fan = self.extruder0 = self.extruder1 = self.heater_bed = None
@@ -89,6 +92,11 @@ class PrinterLCD:
         self.lcd_chip.write_graphics(x, y, 15, [0xff]*width)
     # Screen updating
     def screen_update_event(self, eventtime):
+        # update menu component
+        ret = self.menu.screen_update_event(eventtime)
+        if ret:
+            return ret
+        # update all else
         self.lcd_chip.clear()
         if self.lcd_type == 'hd44780':
             self.screen_update_hd44780(eventtime)

klippy/extras/display/menu.cfg

@@ -0,0 +1,933 @@
+# This file serves as default menu structure.
+# See the "example-menu.cfg" file for description of common config parameters.
+
+### DEFAULT MENU ###
+
+### menu main ###
+[menu __main]
+type: list
+name: Main Menu
+items:
+    __octoprint
+    __sdcard
+    __control
+    __temp
+    __filament
+    __prepare
+    __test
+
+### menu octoprint ###
+[menu __octoprint]
+type: list
+name: OctoPrint
+items:
+    .__pause
+    .__resume
+    .__abort
+
+[menu __octoprint __pause]
+type: command
+enable: toolhead.is_printing
+name: Pause printing
+action: respond action:pause
+gcode:
+
+[menu __octoprint __resume]
+type: command
+enable: toolhead.is_printing
+name: Resume printing
+action: respond action:resume
+gcode:
+
+[menu __octoprint __abort]
+type: command
+enable: toolhead.is_printing
+name: Abort printing
+action: respond action:cancel
+gcode:
+
+### menu virtual sdcard ###
+[menu __sdcard]
+type: vsdcard
+name: SD Card
+items:
+    .__start
+    .__resume
+    .__pause
+
+[menu __sdcard __start]
+type: command
+enable: !toolhead.is_printing
+name: Start printing
+gcode: M24
+
+[menu __sdcard __resume]
+type: command
+enable: toolhead.is_printing
+name: Resume printing
+gcode: M24
+
+[menu __sdcard __pause]
+type: command
+enable: toolhead.is_printing
+name: Pause printing
+gcode: M25
+
+### menu control ###
+[menu __control]
+type: list
+name: Control
+items:
+    .__home
+    .__homez
+    .__homexy
+    .__move_10mm
+    .__move_1mm
+    .__move_01mm
+    .__disable
+    .__fanonoff
+    .__fanspeed
+    .__caselightonoff
+    .__caselightpwm
+
+[menu __control __home]
+type: command
+name: Home All
+gcode: G28
+enable: !toolhead.is_printing
+
+[menu __control __homez]
+type: command
+enable: !toolhead.is_printing
+name: Home Z
+gcode: G28 Z
+
+[menu __control __homexy]
+type: command
+enable: !toolhead.is_printing
+name: Home X/Y
+gcode: G28 X Y
+
+[menu __control __disable]
+type: command
+name: Disable steppers
+gcode:
+    M84
+    M18
+
+[menu __control __fanonoff]
+type: input
+enable: fan.is_enabled
+name: Fan {1:3s}
+parameter: fan.speed
+transform:
+    choose('OFF','ON')
+    choose(0,255)
+input_min: 0
+input_max: 1
+input_step: 1
+gcode: M106 S{2:d}
+
+[menu __control __fanspeed]
+type: input
+enable: fan.is_enabled
+name: Fan speed: {1:3d}%
+parameter: fan.speed
+transform:
+    map(0,1,0,100)
+    map(0,1,0,255)
+input_min: 0
+input_max: 1
+input_step: 0.01
+gcode: M106 S{2:d}
+
+[menu __control __caselightonoff]
+type: input
+enable: output_pin.caselight.is_enabled
+name: Case light: {1:3s}
+parameter: output_pin.caselight.value
+transform:
+    choose('OFF','ON')
+    choose(0,1)
+input_min: 0
+input_max: 1
+input_step: 1
+gcode: SET_PIN PIN=caselight VALUE={2}
+
+[menu __control __caselightpwm]
+type: input
+enable: output_pin.caselight.is_enabled
+name: Case light: {0:4.0%}
+parameter: output_pin.caselight.value
+input_min: 0.0
+input_max: 1.0
+input_step: 0.01
+gcode: SET_PIN PIN=caselight VALUE={0:.2f}
+
+### menu move 10mm ###
+[menu __control __move_10mm]
+type: list
+enable: !toolhead.is_printing
+name: Move 10mm
+items:
+    .__axis_z
+    .__axis_x, .__axis_y
+    .__axis_e
+
+[menu __control __move_10mm __axis_x]
+type: input
+name: "X:{0:05.1f} "
+parameter: toolhead.xpos
+input_min: 0
+input_max: 200.0
+input_step: 10.0
+gcode: G1 X{0:.1f}
+
+[menu __control __move_10mm __axis_y]
+type: input
+name: "Y:{0:05.1f} "
+parameter: toolhead.ypos
+input_min: 0
+input_max: 200.0
+input_step: 10.0
+gcode: G1 Y{0:.1f}
+
+[menu __control __move_10mm __axis_z]
+type: input
+enable: !toolhead.is_printing
+name: "Move Z:{0:05.1f}"
+parameter: toolhead.zpos
+input_min: 0
+input_max: 200.0
+input_step: 10.0
+gcode: G1 Z{0:.1f}
+
+[menu __control __move_10mm __axis_e]
+type: input
+enable: !toolhead.is_printing
+name: "Move E:{0:+06.1f}"
+parameter: 0
+input_min: -250.0
+input_max: 250.0
+input_step: 10.0
+gcode: G1 E{0:.1f} F240
+
+### menu move 1mm ###
+[menu __control __move_1mm]
+type: list
+enable: !toolhead.is_printing
+name: Move 1mm
+items:
+    .__axis_z
+    .__axis_x, .__axis_y
+    .__axis_e
+
+[menu __control __move_1mm __axis_x]
+type: input
+name: "X:{0:05.1f} "
+parameter: toolhead.xpos
+input_min: 0
+input_max: 100.0
+input_step: 1.0
+gcode: G1 X{0:.1f}
+
+[menu __control __move_1mm __axis_y]
+type: input
+name: "Y:{0:05.1f} "
+parameter: toolhead.ypos
+input_min: 0
+input_max: 100.0
+input_step: 1.0
+gcode: G1 Y{0:.1f}
+
+[menu __control __move_1mm __axis_z]
+type: input
+enable: !toolhead.is_printing
+name: "Move Z:{0:05.1f}"
+parameter: toolhead.zpos
+input_min: 0
+input_max: 100.0
+input_step: 1.0
+gcode: G1 Z{0:.1f}
+
+[menu __control __move_1mm __axis_e]
+type: input
+enable: !toolhead.is_printing
+name: "Move E:{0:+06.1f}"
+parameter: 0
+input_min: -100.0
+input_max: 100.0
+input_step: 1.0
+gcode: G1 E{0:.1f} F240
+
+### menu move 0.1mm ###
+[menu __control __move_01mm]
+type: list
+enable: !toolhead.is_printing
+name: Move 0.1mm
+items:
+    .__axis_z
+    .__axis_x, .__axis_y
+    .__axis_e
+
+[menu __control __move_01mm __axis_x]
+type: input
+name: "X:{0:05.1f} "
+parameter: toolhead.xpos
+input_min: 0
+input_max: 50.0
+input_step: 0.1
+gcode: G1 X{0:.1f}
+
+[menu __control __move_01mm __axis_y]
+type: input
+name: "Y:{0:05.1f} "
+parameter: toolhead.ypos
+input_min: 0
+input_max: 50.0
+input_step: 0.1
+gcode: G1 Y{0:.1f}
+
+[menu __control __move_01mm __axis_z]
+type: input
+enable: !toolhead.is_printing
+name: "Move Z:{0:05.1f}"
+parameter: toolhead.zpos
+input_min: 0
+input_max: 50.0
+input_step: 0.1
+gcode: G1 Z{0:.1f}
+
+[menu __control __move_01mm __axis_e]
+type: input
+enable: !toolhead.is_printing
+name: "Move E:{0:+06.1f}"
+parameter: 0
+input_min: -50.0
+input_max: 50.0
+input_step: 0.1
+gcode: G1 E{0:.1f} F240
+
+### menu temperature ###
+[menu __temp]
+type: list
+name: Temperature
+items:
+    .__hotend0_current, .__hotend0_target
+    .__hotend1_current, .__hotend1_target
+    .__hotbed_current, .__hotbed_target
+    .__preheat_pla
+    .__preheat_abs
+    .__cooldown
+
+[menu __temp __hotend0_current]
+type: item
+enable: extruder0.is_enabled
+name: "Ex0:{0:4.0f} T"
+parameter: extruder0.temperature
+
+[menu __temp __hotend0_target]
+type: input
+enable: extruder0.is_enabled
+name: "{0:4.0f}"
+parameter: extruder0.target
+input_min: 0
+input_max: 250
+input_step: 1
+gcode: M104 T0 S{0:.0f}
+
+[menu __temp __hotend1_current]
+type: item
+enable: extruder1.is_enabled
+name: "Ex1:{0:4.0f} T"
+parameter: extruder1.temperature
+
+[menu __temp __hotend1_target]
+type: input
+enable: extruder1.is_enabled
+name: "{0:4.0f}"
+parameter: extruder1.target
+input_min: 0
+input_max: 250
+input_step: 1
+gcode: M104 T1 S{0:.0f}
+
+[menu __temp __hotbed_current]
+type: item
+enable: heater_bed.is_enabled
+name: "Bed:{0:4.0f} T"
+parameter: heater_bed.temperature
+
+[menu __temp __hotbed_target]
+type: input
+enable: heater_bed.is_enabled
+name: "{0:4.0f}"
+parameter: heater_bed.target
+input_min: 0
+input_max: 130
+input_step: 1
+gcode: M140 S{0:.0f}
+
+[menu __temp __preheat_pla]
+type: list
+name: Preheat PLA
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __preheat_pla __all]
+type: command
+enable: extruder0.is_enabled,heater_bed.is_enabled
+name: Preheat all
+gcode:
+    M140 S60
+    M104 S200
+
+[menu __temp __preheat_pla __hotend]
+type: command
+enable: extruder0.is_enabled
+name: Preheat hotend
+gcode: M104 S200
+
+[menu __temp __preheat_pla __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Preheat hotbed
+gcode: M140 S60
+
+[menu __temp __preheat_abs]
+type: list
+name: Preheat ABS
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __preheat_abs __all]
+type: command
+enable: extruder0.is_enabled,heater_bed.is_enabled
+name: Preheat all
+gcode:
+    M140 S110
+    M104 S245
+
+[menu __temp __preheat_abs __hotend]
+type: command
+enable: extruder0.is_enabled
+name: Preheat hotend
+gcode: M104 S245
+
+[menu __temp __preheat_abs __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Preheat hotbed
+gcode: M140 S110
+
+[menu __temp __cooldown]
+type: list
+name: Cooldown
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __cooldown __all]
+type: command
+enable: extruder0.is_enabled,heater_bed.is_enabled
+name: Cooldown all
+gcode:
+    M104 S0
+    M140 S0
+
+[menu __temp __cooldown __hotend]
+type: command
+enable: extruder0.is_enabled
+name: Cooldown hotend
+gcode: M104 S0
+
+[menu __temp __cooldown __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Cooldown hotbed
+gcode: M140 S0
+
+### menu filament ###
+
+[menu __filament]
+type: list
+name: Filament
+items:
+    __temp __hotend0_current, __temp __hotend0_target
+    .__unload
+    .__load
+    .__feed
+
+[menu __filament __load]
+type: command
+name: Load Filament
+gcode:
+    G1 E200 F1000
+    G1 E100 F300
+
+[menu __filament __unload]
+type: command
+name: Unload Filament
+gcode:
+    G1 E-200 F1000
+    G1 E-200 F1800
+
+[menu __filament __feed]
+type: input
+name: Feed Filament: {0:.1f}
+parameter: toolhead.epos
+input_step: 0.1
+gcode: G1 E{0:.1f} F30
+
+### menu prepare ###
+[menu __prepare]
+type: list
+enable: !toolhead.is_printing
+name: Prepare
+items:
+    .__delta_calib
+    .__bedprobe
+    .__hotend_pid_tuning
+    .__hotbed_pid_tuning
+    .__host_restart
+    .__firmware_restart
+
+[menu __prepare __host_restart]
+type: command
+enable: !toolhead.is_printing
+name: Restart host
+gcode: RESTART
+
+[menu __prepare __firmware_restart]
+type: command
+enable: !toolhead.is_printing
+name: Restart FW
+gcode: FIRMWARE_RESTART
+
+[menu __prepare __delta_calib]
+type: command
+enable: !toolhead.is_printing
+name: Delta calibrate
+gcode: DELTA_CALIBRATE
+
+[menu __prepare __bedprobe]
+type: command
+enable: !toolhead.is_printing
+name: Bed probe
+gcode: PROBE
+
+[menu __prepare __hotend_pid_tuning]
+type: command
+enable: !toolhead.is_printing, extruder0.is_enabled
+name: Tune Hotend PID
+gcode: PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1
+
+[menu __prepare __hotbed_pid_tuning]
+type: command
+enable: !toolhead.is_printing, heater_bed.is_enabled
+name: Tune Hotbed PID
+gcode: PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1
+
+### test menu ###
+[menu __test]
+type: list
+name: Test menu
+items:
+    .__scroll
+    .__dump
+
+[menu __test __scroll]
+type: item
+name: This is very long item name
+width: 18
+scroll: true
+
+[menu __test __dump]
+type: command
+name: Dump parameters
+gcode: MENU DO=dump
+
+### info screens ###
+[menu __screen2004_static]
+type: deck
+name: Deck (static)
+longpress_menu: __main
+items: __card2004_static
+
+[menu __screen2004_input]
+type: deck
+name: Deck (input)
+longpress_menu: __main
+items: __card2004_input
+
+[menu __screen1604_static]
+type: deck
+name: Deck (static)
+longpress_menu: __main
+items: __card1604_static
+
+[menu __screen1604_input]
+type: deck
+name: Deck (input)
+longpress_menu: __main
+items: __card1604_input
+
+[menu __screen_test]
+type: deck
+name: Deck (test)
+longpress_menu: __main
+items: __card1, __card2, __card3
+
+### deck cards ###
+
+### special characters for hd44780
+# \x00 - thermometer
+# \x01 - heater_bed
+# \x02 - speed_factor
+# \x03 - clock
+# \x04 - degrees
+# \x05 - usb
+# \x06 - sdcard
+# \x7e - right arrow
+
+[menu __card2004_static]
+type: card
+name: Card 20x04
+content:
+    "\x00{0:3s}\x04\x7e{1:3s}\x04   {2}"
+    "\x01{3:3s}\x04\x7e{4:3s}\x04   \xa5{8}"
+    "fn{6} \x02{5} {7}"
+    "{9}"
+items:
+    __card_hotend0_current
+    __card_hotend0_target
+    __card_zpos
+    __card_hotbed_current
+    __card_hotbed_target
+    __card_frpeed
+    __card_fnspeed
+    5,__card_prt_time, __card_usb_progress, __card_sdcard_progress
+    __card_status
+    __card_msg,__card_xpos|__card_ypos|__card_epos
+
+[menu __card1604_static]
+type: card
+name: Card 16x04
+content:
+    "E{0:3s}/{1:3s} {2}"
+    "B{3:3s}/{4:3s} fr{5}"
+    "fn{6}   {7}"
+    "[{8}] {9}"
+items:
+    __card_hotend0_current
+    __card_hotend0_target
+    __card_zpos
+    __card_hotbed_current
+    __card_hotbed_target
+    __card_frpeed
+    __card_fnspeed
+    5,__card_prt_time_2, __card_usb_progress_2, __card_sdcard_progress_2
+    __card_status_slim
+    __card_msg_slim,__card_xpos|__card_ypos
+
+[menu __card2004_input]
+type: card
+name: Card 20x04
+content:
+    "\x00{0:3s}\x04\x7e{1:3s}\x04   {2}"
+    "\x01{3:3s}\x04\x7e{4:3s}\x04   \xa5{8}"
+    "fn{6} \x02{5} {7}"
+    "{9}"
+items:
+    __card_hotend0_current
+    __card_hotend0_target_in
+    __card_zpos
+    __card_hotbed_current
+    __card_hotbed_target_in
+    __card_frpeed_in
+    __card_fnspeed
+    5,__card_prt_time, __card_usb_progress, __card_sdcard_progress
+    __card_status
+    __card_msg,__card_xpos|__card_ypos|__card_epos
+
+[menu __card1604_input]
+type: card
+name: Card 16x04
+content:
+    "E{0:3s}/{1:3s} {2}"
+    "B{3:3s}/{4:3s} fr{5}"
+    "fn{6}   {7}"
+    "[{8}] {9}"
+items:
+    __card_hotend0_current
+    __card_hotend0_target_in
+    __card_zpos
+    __card_hotbed_current
+    __card_hotbed_target_in
+    __card_frpeed_in
+    __card_fnspeed
+    5,__card_prt_time_2, __card_usb_progress_2, __card_sdcard_progress_2
+    __card_status_slim
+    __card_msg,__card_xpos|__card_ypos
+
+[menu __card1]
+type: card
+name: Card 1
+content:
+    "E0:{0:3s}/{1:3s} B:{4:3s}/{5:3s}"
+    "E1:{2:3s}/{3:3s} {6}"
+    "Fr{7}Fn{8} {9}"
+    "{10}"
+
+items:
+    __card_hotend0_current
+    __card_hotend0_target
+    __card_hotend1_current
+    __card_hotend1_target
+    __card_hotbed_current
+    __card_hotbed_target
+    __card_zpos
+    __card_frpeed_in
+    __card_fnspeed_in
+    5,__card_prt_time, __card_usb_progress, __card_sdcard_progress
+    __card_msg
+
+[menu __card2]
+type: card
+name: Card 2
+content:
+    "E:{0:3s}/{1:3s} B:{2:3s}/{3:3s}"
+    "{4}{5}{6}"
+    "Fr{7} {8} T{9}"
+    "{10}"
+items:
+    __card_hotend0_current
+    __card_hotend0_target
+    __card_hotbed_current
+    __card_hotbed_target
+    __card_xpos
+    __card_ypos
+    __card_zpos
+    __card_frpeed_in
+    __card_usb_progress_2, __card_sdcard_progress_2
+    __card_prt_time_2
+    __card_msg
+
+[menu __card3]
+type: card
+name: Card 3
+content:
+    "Example card :)"
+    "Try this menu."
+    "({0})"
+items:
+    __test
+
+### card items ###
+
+[menu __card_hotend0_current]
+type: item
+enable: extruder0.is_enabled
+name: "{1:3.0f}"
+parameter: extruder0.temperature
+transform: abs()
+
+[menu __card_hotend0_target]
+type: item
+enable: extruder0.is_enabled
+name: "{1:3.0f}"
+parameter: extruder0.target
+transform: abs()
+
+[menu __card_hotend0_target_in]
+type: input
+enable: extruder0.is_enabled
+name: "{1:3.0f}"
+parameter: extruder0.target
+transform: abs()
+input_min: 0
+input_max: 250
+input_step: 1
+gcode: M104 T0 S{0:.0f}
+
+[menu __card_hotend1_current]
+type: item
+enable: extruder1.is_enabled
+name: "{1:3.0f}"
+parameter: extruder1.temperature
+transform: abs()
+
+[menu __card_hotend1_target]
+type: item
+enable: extruder1.is_enabled
+name: "{1:3.0f}"
+parameter: extruder1.target
+transform: abs()
+
+[menu __card_hotend1_target_in]
+type: input
+enable: extruder1.is_enabled
+name: "{1:3.0f}"
+parameter: extruder1.target
+transform: abs()
+input_min: 0
+input_max: 250
+input_step: 1
+gcode: M104 T1 S{0:.0f}
+
+[menu __card_hotbed_current]
+type: item
+enable: heater_bed.is_enabled
+name: "{1:3.0f}"
+parameter: heater_bed.temperature
+transform: abs()
+
+[menu __card_hotbed_target]
+type: item
+enable: heater_bed.is_enabled
+name: "{1:3.0f}"
+parameter: heater_bed.target
+transform: abs()
+
+[menu __card_hotbed_target_in]
+type: input
+enable: heater_bed.is_enabled
+name: "{1:3.0f}"
+parameter: heater_bed.target
+transform: abs()
+input_min: 0
+input_max: 250
+input_step: 1
+gcode: M140 S{0:.0f}
+
+[menu __card_zpos]
+type: item
+name: "Z{0:06.2f}"
+parameter: toolhead.zpos
+
+[menu __card_xpos]
+type: item
+name: "X{0:05.1f}{2}"
+parameter: toolhead.xpos, menu.is20xx
+transform:
+    1.choose('',' ')
+
+[menu __card_ypos]
+type: item
+name: "Y{0:05.1f}{2}"
+parameter: toolhead.ypos, menu.is20xx
+transform:
+    1.choose('',' ')
+
+[menu __card_epos]
+type: item
+name: "E{0:05.1f}{2}"
+parameter: toolhead.epos, menu.is20xx
+transform:
+    1.choose('',' ')
+
+[menu __card_frpeed]
+type: item
+name: "{0:4.0%}"
+parameter: gcode.speed_factor
+
+[menu __card_fnspeed]
+type: item
+name: "{0:4.0%}"
+parameter: fan.speed
+
+[menu __card_frpeed_in]
+type: input
+name: "{0:4.0%}"
+parameter: gcode.speed_factor
+transform:
+    map(0,1,0,255)
+input_min: 0
+input_max: 1
+input_step: 0.01
+gcode: M220 S{1:d}
+
+[menu __card_fnspeed_in]
+type: input
+enable: fan.is_enabled
+name: "{0:4.0%}"
+parameter: fan.speed
+transform:
+    map(0,1,0,255)
+input_min: 0
+input_max: 1
+input_step: 0.01
+gcode: M106 S{1:d}
+
+[menu __card_prt_time]
+type: item
+name: "\x03{1:02d}:{2:02d}"
+transform:
+    minutes()
+    seconds()
+parameter: toolhead.printing_time
+
+[menu __card_prt_time_2]
+type: item
+name: "T{1:02d}:{2:02d}"
+transform:
+    minutes()
+    seconds()
+parameter: toolhead.printing_time
+
+[menu __card_usb_progress]
+type: item
+enable: !virtual_sdcard.progress, display.progress
+name: "\x05{0:3.0f}%"
+parameter: display.progress
+
+[menu __card_sdcard_progress]
+type: item
+enable: virtual_sdcard.is_enabled, virtual_sdcard.progress
+name: "\x06{0:3.0f}%"
+parameter: virtual_sdcard.progress
+
+[menu __card_usb_progress_2]
+type: item
+#enable: !virtual_sdcard.progress,display.progress
+name: "pr{0:3.0f}%"
+parameter: display.progress
+
+[menu __card_sdcard_progress_2]
+type: item
+enable: virtual_sdcard.is_enabled, virtual_sdcard.progress
+name: "pr{0:3.0f}%"
+parameter: virtual_sdcard.progress
+
+[menu __card_msg]
+enable: display.message
+type: item
+scroll: true
+width: 20
+name: "{0}"
+parameter: display.message
+
+[menu __card_msg_slim]
+enable: display.message
+type: item
+scroll: true
+width: 12
+name: "{0}"
+parameter: display.message
+
+[menu __card_status]
+type: item
+name: "{0}"
+width: 5
+parameter: toolhead.status
+
+[menu __card_status_slim]
+type: item
+name: "{0}"
+width: 1
+parameter: toolhead.status