3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-07 22:14:05 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Generic Heater Support

Browse source 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
This commit is contained in:
John Jardine 2019-02-14 01:15:11 +00:00
parent 805e56008f
commit 6316b2c1b6
4 changed files with 62 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

3
docs/G-Codes.md
View file

@ -111,6 +111,9 @@ The following standard commands are supported:
[ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify
the printer's velocity limits. Note that one may only set values
less than or equal to the limits specified in the config file.
- `SET_HEATER_TEMPERATURE HEATER=<heater_name> [TARGET=<target_temperature>]`:
Sets the target temperature for a heater. If a target temperature is
not supplied, the target is 0.
- `SET_PRESSURE_ADVANCE [EXTRUDER=<config_name>] [ADVANCE=<pressure_advance>]
[ADVANCE_LOOKAHEAD_TIME=<pressure_advance_lookahead_time>]`:
Set pressure advance parameters. If EXTRUDER is not specified, it