From 52ed6b200e76c117adc6eb13ba55e757b3d4178f Mon Sep 17 00:00:00 2001 From: EagleJinWt Date: Tue, 25 Nov 2025 21:10:21 +0100 Subject: [PATCH] Fix formatting --- docs/Config_Reference.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 7803680a9..3b094ae55 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -8,7 +8,7 @@ to cut-and-paste them into a printer config file. See the [installation document](Installation.md) for information on setting up Klipper and choosing an initial config file. -For any objects that may be referenced by other configuration sections (such as [multi_pin](Config_Reference.html#multi_pin), [adxl345](Config_Reference.html#adxl345), [probe](Config_Reference.html#probe)(such as [bed_mesh](Config_Reference.html#bed_mesh) or [z_tilt](Config_Reference.html#z_tilt) or [quad_gantry_level](Config_Reference.html#quad_gantry_level) needs a probe defined), etc.), their definitions must appear before any sections that reference them. Klipper processes the configuration file in order and cannot resolve references to objects that have not yet been defined, and potentially throw an error during startup, such as ```Unknown pin chip name 'multi_pin'```. +For any objects that may be referenced by other configuration sections (such as [multi_pin](Config_Reference.html#multi_pin), [adxl345](Config_Reference.html#adxl345), [probe](Config_Reference.html#probe)([bed_mesh](Config_Reference.html#bed_mesh), [z_tilt](Config_Reference.html#z_tilt), [quad_gantry_level](Config_Reference.html#quad_gantry_level, etc.) needs a probe defined), etc.), their definitions must appear before any sections that reference them. Klipper processes the configuration file in order and cannot resolve references to objects that have not yet been defined, and potentially throw an error during startup, such as ```Unknown pin chip name 'multi_pin'```. ## Micro-controller configuration