3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-09 14:55:09 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

config: Only document thermistors in example.cfg

Browse source 
Move the common temperature amplifier config descriptions to
example-extras.cfg.

Also, minor changes to wording of some example-extra.cfg sections.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-10-27 11:50:57 -04:00
parent 1a69f38e6e
commit 43453131ac
2 changed files with 81 additions and 91 deletions
Download patch file Download diff file Expand all files Collapse all files

19
config/example.cfg
View file

@ -151,28 +151,23 @@ heater_pin: ar10
# setting may be used to limit the total power output (over extended
# periods) to the heater. The default is 1.0.
sensor_type: EPCOS 100K B57560G104F
# Type of sensor - this may be "EPCOS 100K B57560G104F", "ATC
# Semitec 104GT-2", "NTC 100K beta 3950", "Honeywell 100K
# 135-104LAG-J01", "NTC 100K MGB18-104F39050L32", "AD595", "PT100
# INA826", "MAX6675", "MAX31855", "MAX31856", or "MAX31865".
# Additional sensor types may be available - see the
# example-extras.cfg file for details. This parameter must be
# Type of sensor - common thermistors are "EPCOS 100K B57560G104F",
# "ATC Semitec 104GT-2", "NTC 100K beta 3950", "Honeywell 100K
# 135-104LAG-J01", and "NTC 100K MGB18-104F39050L32". See the
# example-extras.cfg file for other sensors. This parameter must be
# provided.
sensor_pin: analog13
# Analog input pin connected to the sensor. This parameter must be
# provided.
#pullup_resistor: 4700
# The resistance (in ohms) of the pullup attached to the
# thermistor. This parameter is only valid when the sensor is a
# thermistor. The default is 4700 ohms.
# The resistance (in ohms) of the pullup attached to the thermistor.
# This parameter is only valid when the sensor is a thermistor. The
# default is 4700 ohms.
#inline_resistor: 0
# The resistance (in ohms) of an extra (not heat varying) resistor
# that is placed inline with the thermistor. It is rare to set this.
# This parameter is only valid when the sensor is a thermistor. The
# default is 0 ohms.
#adc_voltage: 5.0
# The ADC comparison voltage. This parameter is only valid when the
# sensor is an AD595 or "PT100 INA826". The default is 5 volts.
#smooth_time: 2.0
# A time value (in seconds) over which temperature measurements will
# be smoothed to reduce the impact of measurement noise. The default