3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-09 14:55:09 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

stm32: Simplify USB/Serial/CANbus Kconfig selection

Browse source 
Combine the various communication options into a single "make
menuconfig" menu item.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-03-18 13:20:54 -04:00
parent c8dc3afc23
commit 1eddc0fd90
29 changed files with 186 additions and 172 deletions
Download patch file Download diff file Expand all files Collapse all files

6
config/generic-bigtreetech-skr-e3-dip.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for the BIGTREETECH SKR E3
# DIP. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PC13".
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PC13".
# The "make flash" command does not work on the SKR E3 DIP. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

6
config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for the BIGTREETECH SKR mini
# E3. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PC13".
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PC13".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

6
config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for the BIGTREETECH SKR mini
# E3 v1.2. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PC13".
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PC13".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

6
config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for the BIGTREETECH SKR mini
# E3 v2.0. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PA14".
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PA14".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

6
config/generic-bigtreetech-skr-mini-mz.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for the BIGTREETECH SKR mini
# MZ v1.0. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PA14".
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PA14".
# The "make flash" command does not work on the SKR mini MZ. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

2
config/generic-bigtreetech-skr-mini.cfg
View file

@ -1,6 +1,6 @@
# This file contains common pin mappings for the BIGTREETECH SKR
# MINI. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader".
# STM32F103 with a "28KiB bootloader" and USB communication.
# The "make flash" command does not work on the SKR mini. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

8
config/generic-creality-v4.2.7.cfg
View file

@ -1,11 +1,11 @@
# This file contains pin mappings for the Creality "v4.2.7" board. To
# use this config, during "make menuconfig" select the STM32F103 with
# a "28KiB bootloader" and with "Use USB for communication" disabled.
# a "28KiB bootloader" and serial (on USART1 PA10/PA9) communication.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

4
config/generic-fysetc-cheetah-v1.1.cfg
View file

@ -1,7 +1,7 @@
# This file contains common pin mappings for the Fysetc Cheetah v1.1
# board. To use this config, the firmware should be compiled for the
# STM32F103 with "No bootloader" and with "Use USB for communication"
# disabled.
# STM32F103 with "No bootloader" and serial (on USART1 PA10/PA9)
# communication.
# The "make flash" command does not work on the Cheetah. Instead,
# after running "make", run the following command to flash the board:

4
config/generic-mks-robin-e3.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for MKS Robin E3 boards. To
# use this config, the firmware should be compiled for the STM32F103.
# When running "make menuconfig", enable "extra low-level
# configuration setup", select the 20KiB bootloader, disable "USB for
# communication", and select USART1 for the "Serial Port".
# configuration setup", select the 20KiB bootloader, and serial (on
# USART1 PA10/PA9) communication.
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:

4
config/generic-mks-robin-nano-v1.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for MKS Robin Nano (v1.2.004)
# boards. To use this config, the firmware should be compiled for the
# STM32F103. When running "make menuconfig", enable "extra low-level
# configuration setup", select the 28KiB bootloader, disable "USB for
# communication", and select USART3 for the "Serial Port".
# configuration setup", select the 28KiB bootloader, and serial (on
# USART3 PB11/PB10) communication.
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:

4
config/generic-mks-robin-nano-v2.cfg
View file

@ -1,8 +1,8 @@
# This file contains common pin mappings for MKS Robin Nano V2
# boards. To use this config, the firmware should be compiled for the
# STM32F103. When running "make menuconfig", enable "extra low-level
# configuration setup", select the 28KiB bootloader, disable "USB for
# communication", and select USART3 for the "Serial Port".
# configuration setup", select the 28KiB bootloader, and serial (on
# USART3 PB11/PB10) communication.
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:

6
config/printer-alfawise-u30-2018.cfg
View file

@ -1,9 +1,9 @@
# This file contains common pin mappings for the Alfawise U30 printer.
# To use this config, the firmware should be compiled for the
# STM32F103. When running "make menuconfig", enable "extra low-level
# configuration setup", select the 64KiB bootloader, disable "USB for
# communication", and set "GPIO pins to set at micro-controller
# startup" to "!PC4,!PD12".
# configuration setup", select the 64KiB bootloader, serial (on USART1
# PA10/PA9) communication, and set "GPIO pins to set at
# micro-controller startup" to "!PC4,!PD12".
# The "make flash" command does not work on the Alfawise U30. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a

6
config/printer-creality-cr6se-2020.cfg
View file

@ -1,7 +1,7 @@
# This file contains pin mappings for the stock 2020 Creality CR6-SE.
# To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# To use this config, during "make menuconfig" select the STM32F103
# with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# Flash this firmware by copying "out/klipper.bin" to a SD card and
# turning on the printer with the card inserted. The firmware

10
config/printer-creality-ender3-v2-2020.cfg
View file

@ -1,12 +1,12 @@
# This file contains pin mappings for the stock 2020 Creality Ender 3
# V2. To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

10
config/printer-creality-ender3max-2021.cfg
View file

@ -1,7 +1,7 @@
# This file contains pin mappings for the stock 2020 Creality Ender 3
# MAX. To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# Because this printer has factory wiring, mounts, and firmware for
# a BLTouch, but does not ship with one at this time, default values
@ -10,9 +10,9 @@
# customize the offsets, particularly z-offset, for their specific unit.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

8
config/printer-creality-ender3pro-2020.cfg
View file

@ -1,12 +1,12 @@
# This file contains pin mappings for the stock 2020 Creality Ender 3
# Pro with the 32-bit Creality 4.2.2 board. To use this config, during
# "make menuconfig" select the STM32F103 with a "28KiB bootloader" and
# with "Use USB for communication" disabled.
# serial (on USART1 PA10/PA9) communication.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

12
config/printer-creality-ender6-2020.cfg
View file

@ -1,7 +1,7 @@
# This file contains pin mappings for the stock 2020 Creality Ender 6.
# To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# To use this config, during "make menuconfig" select the STM32F103
# with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# Because this printer has factory wiring, mounts, and firmware for
# a BLTouch, but does not ship with one at this time, default values
@ -10,9 +10,9 @@
# customize the offsets, particularly z-offset, for their specific unit.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

4
config/printer-flsun-q5-2020.cfg
View file

@ -3,8 +3,8 @@
# To use this config, the firmware should be compiled for the
# STM32F103. When running "make menuconfig", enable "extra low-level
# configuration setup", select the 28KiB bootloader, disable "USB for
# communication", and select USART3 for the "Serial Port".
# configuration setup", select the 28KiB bootloader, and serial (on
# USART3 PB11/PB10) communication.
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:

3
config/printer-monoprice-mini-delta-2017.cfg
View file

@ -1,7 +1,6 @@
# This file contains common pin mappings for the 2017 Monoprice
# Mini Delta. To use this config, the firmware should be compiled for the
# STM32F070 microcontroller with an 8MHz crystal and USB for communication
# (instead of serial).
# STM32F070 microcontroller with an 8MHz crystal and USB for communication.
#
# IMPORTANT: Use of Kipper with a Monoprice Mini Delta requires a power supply
# with a _minimum_ 120 W (i.e. 10 A) capacity! The stock power supply will not

3
config/printer-monoprice-select-mini-v2-2018.cfg
View file

@ -1,7 +1,6 @@
# This file contains common pin mappings for the 2019 Monoprice
# Select Mini v2. To use this config, the firmware should be compiled for the
# STM32F070 microcontroller with an 8MHz crystal and USB for communication
# (instead of serial).
# STM32F070 microcontroller with an 8MHz crystal and USB for communication.
#
# Use the following settings in make menuconfig:
#

18
config/printer-tronxy-x5sa-v6-2019.cfg
View file

@ -1,15 +1,15 @@
# This is a Klipper configuration for TronXY X5SA, with
# CXY-V6 motherboard.
# This is a Klipper configuration for TronXY X5SA, with CXY-V6
# motherboard.
# === FLASHING WITH STOCK BOOTLOADER ===
# You should make firmware for STM32F103 with bootloader offset
# at 0x8008800 (Chitu v6 Bootloader). Uncheck USB, and leave default
# serial settings.
#
# Use "./scripts/update_chitu.py ./out/klipper.bin ./out/update.cbd" after make to generate update.cbd.
# Put `update.cbd` onto SD card, and reboot the printer.
# It will be automatically installed, and you will be able to update it this way.
# at 0x8008800 (Chitu v6 Bootloader) and serial (on USART1 PA10/PA9)
# communication.
# Use "./scripts/update_chitu.py ./out/klipper.bin ./out/update.cbd"
# after make to generate update.cbd. Put `update.cbd` onto SD card,
# and reboot the printer. It will be automatically installed, and you
# will be able to update it this way.
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

3
config/printer-twotrees-sapphire-plus-2020.cfg
View file

@ -5,8 +5,7 @@
# When running "make menuconfig" you have to:
# - enable "extra low-level configuration setup",
# - select the 28KiB bootloader,
# - disable "USB for communication"
# - select USART3 for the "Serial Port"
# - select serial (on USART3 PB11/PB10) communication
# - set "GPIO pins to set at micro-controller startup" to "!PC6,!PD13"
# Note that the "make flash" command does not work with the Sapphire