3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-07-24 23:24:01 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

output_pin: Deprecate the maximum_mcu_duration parameter

Browse source 
Advise users to configure a pwm_tool config section if checking for
maximum mcu duration is required.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2024-01-12 22:52:32 -05:00
parent 7abafb575b
commit 1baa45913f
3 changed files with 14 additions and 9 deletions
Download patch file Download diff file Expand all files Collapse all files

18
docs/Config_Reference.md
View file

@ -3102,13 +3102,6 @@ pin:
#shutdown_value:
# The value to set the pin to on an MCU shutdown event. The default
# is 0 (for low voltage).
#maximum_mcu_duration:
# The maximum duration a non-shutdown value may be driven by the MCU
# without an acknowledge from the host.
# If host can not keep up with an update, the MCU will shutdown
# and set all pins to their respective shutdown values.
# Default: 0 (disabled)
# Usual values are around 5 seconds.
#cycle_time: 0.100
# The amount of time (in seconds) per PWM cycle. It is recommended
# this be 10 milliseconds or greater when using software based PWM.
@ -3128,8 +3121,9 @@ pin:
# then the 'value' parameter can be specified using the desired
# amperage for the stepper. The default is to not scale the 'value'
# parameter.
#maximum_mcu_duration:
#static_value:
# This option is deprecated and should no longer be specified.
# These options are deprecated and should no longer be specified.
```
### [pwm_tool]
@ -3144,9 +3138,15 @@ extended [g-code commands](G-Codes.md#output_pin).
[pwm_tool my_tool]
pin:
# The pin to configure as an output. This parameter must be provided.
#maximum_mcu_duration:
# The maximum duration a non-shutdown value may be driven by the MCU
# without an acknowledge from the host.
# If host can not keep up with an update, the MCU will shutdown
# and set all pins to their respective shutdown values.
# Default: 0 (disabled)
# Usual values are around 5 seconds.
#value:
#shutdown_value:
#maximum_mcu_duration:
#cycle_time: 0.100
#hardware_pwm: False
#scale: