3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-08-06 13:34:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

docs: Move config reference information to new Config_Reference.md

Browse source 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-11-16 18:47:32 -05:00
parent 9fd8f7761e
commit 15b5dbaf8f
120 changed files with 1955 additions and 1378 deletions
Download patch file Download diff file Expand all files Collapse all files

2
docs/Sensorless_Homing.md
View file

@ -61,7 +61,7 @@ The name of the virtual end stop pin is derived from the name of the TMC2130 sec
The TMC2130 and TMC5160 have both a `diag0_pin` and `diag1_pin` in most known hardware the `diag1_pin` is appropriate. In order for klipper to correctly configure the driver for sensorless homing, the correct configuration property name `diag0_pin` or `diag1_pin` must be used. Which is used is determined by which driver pin is connected to the MCU pin.
ATTENTION: This guide only mentions the mandatory parameters and the ones needed to set up sensorless homing. There are many other options to configure on a TMC2130, make sure to take a look at `config/example-extras.cfg` for all the available options.
ATTENTION: This guide only mentions the mandatory parameters and the ones needed to set up sensorless homing. There are many other options to configure on a TMC2130, make sure to take a look at [config reference](Config_Reference.md#tmc2130) for all the available options.
## Testing of SPI/UART communication
Now that the stepper driver is configured, let's make sure that Klipper can communicate with the TMC2130 by sending the following extended G-Code command to the printer: