mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2026-01-05 22:37:41 -07:00
fcb640bee1
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer. * Change Ironing angle offset range from [-1,359] to [0,359]. -1 is redundant because it is the same behavior as 0 offset. * Change ironing_angle new default value to 0. * Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value. * Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle. * Add u8 prefix for degree symbol string * Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used. * Update quality settings wiki for Ironing * Set f->is_using_template_angle when making ironing filler objects * Update quality_settings_ironing link from #angle to #angle-offset --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com> |
||
|---|---|---|
| .. | ||
| quality_settings_bridging.md | ||
| quality_settings_ironing.md | ||
| quality_settings_layer_height.md | ||
| quality_settings_line_width.md | ||
| quality_settings_overhangs.md | ||
| quality_settings_precision.md | ||
| quality_settings_seam.md | ||
| quality_settings_wall_and_surfaces.md | ||
| quality_settings_wall_generator.md | ||