OrcaSlicer/src/avrdude/arduino.c

/*
 * avrdude - A Downloader/Uploader for AVR device programmers
 * Copyright (C) 2009 Lars Immisch
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

/* $Id$ */

/*
 * avrdude interface for Arduino programmer
 *
 * The Arduino programmer is mostly a STK500v1, just the signature bytes
 * are read differently.
 */

#include "ac_cfg.h"

#include <stdio.h>
#include <string.h>
#include <unistd.h>

#include "avrdude.h"
#include "libavrdude.h"
#include "stk500_private.h"
#include "stk500.h"
#include "arduino.h"

/* read signature bytes - arduino version */
static int arduino_read_sig_bytes(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m)
{
  unsigned char buf[32];
  (void)p;

  /* Signature byte reads are always 3 bytes. */

  if (m->size < 3) {
    avrdude_message(MSG_INFO, "%s: memsize too small for sig byte read", progname);
    return -1;
  }

  buf[0] = Cmnd_STK_READ_SIGN;
  buf[1] = Sync_CRC_EOP;

  serial_send(&pgm->fd, buf, 2);

  if (serial_recv(&pgm->fd, buf, 5) < 0)
    return -1;
  if (buf[0] == Resp_STK_NOSYNC) {
    avrdude_message(MSG_INFO, "%s: stk500_cmd(): programmer is out of sync\n",
			progname);
	return -1;
  } else if (buf[0] != Resp_STK_INSYNC) {
    avrdude_message(MSG_INFO, "\n%s: arduino_read_sig_bytes(): (a) protocol error, "
                    "expect=0x%02x, resp=0x%02x\n",
                    progname, Resp_STK_INSYNC, buf[0]);
	return -2;
  }
  if (buf[4] != Resp_STK_OK) {
    avrdude_message(MSG_INFO, "\n%s: arduino_read_sig_bytes(): (a) protocol error, "
                    "expect=0x%02x, resp=0x%02x\n",
                    progname, Resp_STK_OK, buf[4]);
    return -3;
  }

  m->buf[0] = buf[1];
  m->buf[1] = buf[2];
  m->buf[2] = buf[3];

  return 3;
}

static int prusa_init_external_flash(PROGRAMMER * pgm)
{
  // Note: send/receive as in _the firmare_ send & receives
  const char entry_magic_send[]             = "start\n";
  const unsigned char entry_magic_receive[] = "w25x20cl_enter\n";
  const char entry_magic_cfm[]              = "w25x20cl_cfm\n";
  const size_t buffer_len = 32;     // Should be large enough for the above messages

  int res;
  size_t recv_size;
  char *buffer = alloca(buffer_len);

  // 1. receive the "start" command
  recv_size = sizeof(entry_magic_send) - 1;
  res = serial_recv(&pgm->fd, (unsigned char *)buffer, recv_size);
  if (res < 0) {
    avrdude_message(MSG_INFO, "%s: prusa_init_external_flash(): MK3 printer did not boot up on time or serial communication failed\n", progname);
    return -1;
  } else if (strncmp(buffer, entry_magic_send, recv_size) != 0) {
    avrdude_message(MSG_INFO, "%s: prusa_init_external_flash(): MK3 printer emitted incorrect start code: `%*s`\n", progname, recv_size, buffer);
    return -1;
  }

  // 2. Send the external flash programmer enter command
  if (serial_send(&pgm->fd, entry_magic_receive, sizeof(entry_magic_receive) - 1) < 0) {
    avrdude_message(MSG_INFO, "%s: prusa_init_external_flash(): Failed to send command to the printer\n",progname);
    return -1;
  }

  // 3. Receive the entry confirmation command
  recv_size = sizeof(entry_magic_cfm) - 1;
  res = serial_recv(&pgm->fd, (unsigned char *)buffer, recv_size);
  if (res < 0) {
    avrdude_message(MSG_INFO, "%s: prusa_init_external_flash(): MK3 printer did not boot up on time or serial communication failed\n", progname);
    return -1;
  } else if (strncmp(buffer, entry_magic_cfm, recv_size) != 0) {
    avrdude_message(MSG_INFO, "%s: prusa_init_external_flash(): MK3 printer emitted incorrect cfm code: `%*s`\n", progname, recv_size, buffer);
    return -1;
  }

  return 0;
}

static int arduino_open(PROGRAMMER * pgm, char * port)
{
  union pinfo pinfo;
  strcpy(pgm->port, port);
  pinfo.baud = pgm->baudrate? pgm->baudrate: 115200;
  if (serial_open(port, pinfo, &pgm->fd)==-1) {
    return -1;
  }

  /* Clear DTR and RTS to unload the RESET capacitor 
   * (for example in Arduino) */
  serial_set_dtr_rts(&pgm->fd, 0);
  usleep(250*1000);
  /* Set DTR and RTS back to high */
  serial_set_dtr_rts(&pgm->fd, 1);
  usleep(50*1000);

  // Sometimes there may be line noise generating input on the printer's USB-to-serial IC
  // Here we try to clean its input buffer with a sequence of newlines (a minimum of 9 is needed):
  const unsigned char cleanup_newlines[] = "\n\n\n\n\n\n\n\n\n\n";
  if (serial_send(&pgm->fd, cleanup_newlines, sizeof(cleanup_newlines) - 1) < 0) {
    return -1;
  }

  /*
   * drain any extraneous input
   */
  stk500_drain(pgm, 0);

  // Initialization sequence for programming the external FLASH on the Prusa MK3
  if (prusa_init_external_flash(pgm) < 0) {
    avrdude_message(MSG_INFO, "%s: arduino_open(): Failed to initialize MK3 external flash programming mode\n", progname);
    return -1;
  }

  if (stk500_getsync(pgm) < 0) {
    serial_close(&pgm->fd);
    return -1;
  }

  return 0;
}

static void arduino_close(PROGRAMMER * pgm)
{
  serial_set_dtr_rts(&pgm->fd, 0);
  serial_close(&pgm->fd);
  pgm->fd.ifd = -1;
}

const char arduino_desc[] = "Arduino programmer";

void arduino_initpgm(PROGRAMMER * pgm)
{
  /* This is mostly a STK500; just the signature is read
     differently than on real STK500v1 
     and the DTR signal is set when opening the serial port
     for the Auto-Reset feature */
  stk500_initpgm(pgm);

  strcpy(pgm->type, "Arduino");
  pgm->read_sig_bytes = arduino_read_sig_bytes;
  pgm->open = arduino_open;
  pgm->close = arduino_close;
}