mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-12-25 00:58:35 -07:00
fcb640bee1
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer. * Change Ironing angle offset range from [-1,359] to [0,359]. -1 is redundant because it is the same behavior as 0 offset. * Change ironing_angle new default value to 0. * Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value. * Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle. * Add u8 prefix for degree symbol string * Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used. * Update quality settings wiki for Ironing * Set f->is_using_template_angle when making ironing filler objects * Update quality_settings_ironing link from #angle to #angle-offset --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com> |
||
|---|---|---|
| .. | ||
| 0.16mm Opitmal @Comgrow T500 0.6.json | ||
| 0.16mm Optimal @Comgrow T500 0.4.json | ||
| 0.18mm Optimal @Comgrow T500.json | ||
| 0.20mm Optimal @Comgrow T300 0.4 - official.json | ||
| 0.20mm Standard @Comgrow T500 0.4.json | ||
| 0.20mm Standard @Comgrow T500 0.6.json | ||
| 0.20mm Standard @Comgrow T500 1.0.json | ||
| 0.20mm Standard @Comgrow T500.json | ||
| 0.24mm Draft @Comgrow T500 0.4.json | ||
| 0.24mm Draft @Comgrow T500 0.6.json | ||
| 0.24mm Optimal @Comgrow T500 0.8.json | ||
| 0.28mm SuperDraft @Comgrow T500 0.4.json | ||
| 0.28mm SuperDraft @Comgrow T500 0.6.json | ||
| 0.32mm Standard @Comgrow T500 0.8.json | ||
| 0.40mm Draft @Comgrow T500 0.8.json | ||
| 0.48mm Draft @Comgrow T500 0.8.json | ||
| 0.56mm SuperDraft @Comgrow T500 0.8.json | ||
| fdm_process_comgrow_common.json | ||
| fdm_process_common.json | ||