3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-07 06:57:36 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
OrcaSlicer/src/libslic3r/PrintConfig.cpp
SoftFever b51856faff fix/update locale
2023-12-28 00:23:42 +08:00

6556 lines
285 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

///|/ Copyright (c) Prusa Research 2016 - 2023 Vojtěch Bubník @bubnikv, Lukáš Matěna @lukasmatena, Lukáš Hejl @hejllukas, Tomáš Mészáros @tamasmeszaros, Oleksandra Iushchenko @YuSanka, Pavel Mikuš @Godrak, David Kocík @kocikdav, Enrico Turri @enricoturri1966, Filip Sykala @Jony01, Vojtěch Král @vojtechkral
///|/ Copyright (c) 2023 Pedro Lamas @PedroLamas
///|/ Copyright (c) 2023 Mimoja @Mimoja
///|/ Copyright (c) 2020 - 2021 Sergey Kovalev @RandoMan70
///|/ Copyright (c) 2021 Niall Sheridan @nsheridan
///|/ Copyright (c) 2021 Martin Budden
///|/ Copyright (c) 2021 Ilya @xorza
///|/ Copyright (c) 2020 Paul Arden @ardenpm
///|/ Copyright (c) 2020 rongith
///|/ Copyright (c) 2019 Spencer Owen @spuder
///|/ Copyright (c) 2019 Stephan Reichhelm @stephanr
///|/ Copyright (c) 2018 Martin Loidl @LoidlM
///|/ Copyright (c) SuperSlicer 2018 Remi Durand @supermerill
///|/ Copyright (c) 2016 - 2017 Joseph Lenox @lordofhyphens
///|/ Copyright (c) Slic3r 2013 - 2016 Alessandro Ranellucci @alranel
///|/ Copyright (c) 2016 Vanessa Ezekowitz @VanessaE
///|/ Copyright (c) 2015 Alexander Rössler @machinekoder
///|/ Copyright (c) 2014 Petr Ledvina @ledvinap
///|/
///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
///|/
#include "PrintConfig.hpp"
#include "Config.hpp"
#include "I18N.hpp"
#include <set>
#include <boost/algorithm/string/replace.hpp>
#include <boost/algorithm/string/case_conv.hpp>
#include <boost/format.hpp>
#include <boost/lexical_cast.hpp>
#include <boost/log/trivial.hpp>
#include <boost/thread.hpp>
#include <float.h>
namespace {
std::set<std::string> SplitStringAndRemoveDuplicateElement(const std::string &str, const std::string &separator)
{
std::set<std::string> result;
if (str.empty()) return result;
std::string strs = str + separator;
size_t pos;
size_t size = strs.size();
for (int i = 0; i < size; ++i) {
pos = strs.find(separator, i);
if (pos < size) {
std::string sub_str = strs.substr(i, pos - i);
result.insert(sub_str);
i = pos + separator.size() - 1;
}
}
return result;
}
void ReplaceString(std::string &resource_str, const std::string &old_str, const std::string &new_str)
{
std::string::size_type pos = 0;
while ((pos = resource_str.find(old_str)) != std::string::npos) { resource_str.replace(pos, old_str.length(), new_str); }
}
}
namespace Slic3r {
//! macro used to mark string used at localization,
//! return same string
#define L(s) (s)
#define _(s) Slic3r::I18N::translate(s)
static t_config_enum_names enum_names_from_keys_map(const t_config_enum_values &enum_keys_map)
{
t_config_enum_names names;
int cnt = 0;
for (const auto& kvp : enum_keys_map)
cnt = std::max(cnt, kvp.second);
cnt += 1;
names.assign(cnt, "");
for (const auto& kvp : enum_keys_map)
names[kvp.second] = kvp.first;
return names;
}
#define CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(NAME) \
static t_config_enum_names s_keys_names_##NAME = enum_names_from_keys_map(s_keys_map_##NAME); \
template<> const t_config_enum_values& ConfigOptionEnum<NAME>::get_enum_values() { return s_keys_map_##NAME; } \
template<> const t_config_enum_names& ConfigOptionEnum<NAME>::get_enum_names() { return s_keys_names_##NAME; }
static t_config_enum_values s_keys_map_PrinterTechnology {
{ "FFF", ptFFF },
{ "SLA", ptSLA }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrinterTechnology)
static t_config_enum_values s_keys_map_PrintHostType {
{ "prusalink", htPrusaLink },
{ "prusaconnect", htPrusaConnect },
{ "octoprint", htOctoPrint },
{ "duet", htDuet },
{ "flashair", htFlashAir },
{ "astrobox", htAstroBox },
{ "repetier", htRepetier },
{ "mks", htMKS }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrintHostType)
static t_config_enum_values s_keys_map_AuthorizationType {
{ "key", atKeyPassword },
{ "user", atUserPassword }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(AuthorizationType)
static t_config_enum_values s_keys_map_GCodeFlavor {
{ "marlin", gcfMarlinLegacy },
{ "reprap", gcfRepRapSprinter },
{ "reprapfirmware", gcfRepRapFirmware },
{ "repetier", gcfRepetier },
{ "teacup", gcfTeacup },
{ "makerware", gcfMakerWare },
{ "marlin2", gcfMarlinFirmware },
{ "sailfish", gcfSailfish },
{ "klipper", gcfKlipper },
{ "smoothie", gcfSmoothie },
{ "mach3", gcfMach3 },
{ "machinekit", gcfMachinekit },
{ "no-extrusion", gcfNoExtrusion }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(GCodeFlavor)
static t_config_enum_values s_keys_map_FuzzySkinType {
{ "none", int(FuzzySkinType::None) },
{ "external", int(FuzzySkinType::External) },
{ "all", int(FuzzySkinType::All) },
{ "allwalls", int(FuzzySkinType::AllWalls)}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(FuzzySkinType)
static t_config_enum_values s_keys_map_InfillPattern {
{ "concentric", ipConcentric },
{ "zig-zag", ipRectilinear },
{ "grid", ipGrid },
{ "line", ipLine },
{ "cubic", ipCubic },
{ "triangles", ipTriangles },
{ "tri-hexagon", ipStars },
{ "gyroid", ipGyroid },
{ "honeycomb", ipHoneycomb },
{ "adaptivecubic", ipAdaptiveCubic },
{ "monotonic", ipMonotonic },
{ "monotonicline", ipMonotonicLine },
{ "alignedrectilinear", ipAlignedRectilinear },
{ "3dhoneycomb", ip3DHoneycomb },
{ "hilbertcurve", ipHilbertCurve },
{ "archimedeanchords", ipArchimedeanChords },
{ "octagramspiral", ipOctagramSpiral },
{ "supportcubic", ipSupportCubic },
{ "lightning", ipLightning }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(InfillPattern)
static t_config_enum_values s_keys_map_IroningType {
{ "no ironing", int(IroningType::NoIroning) },
{ "top", int(IroningType::TopSurfaces) },
{ "topmost", int(IroningType::TopmostOnly) },
{ "solid", int(IroningType::AllSolid) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(IroningType)
//BBS
static t_config_enum_values s_keys_map_WallInfillOrder {
{ "inner wall/outer wall/infill", int(WallInfillOrder::InnerOuterInfill) },
{ "outer wall/inner wall/infill", int(WallInfillOrder::OuterInnerInfill) },
{ "inner-outer-inner wall/infill", int(WallInfillOrder::InnerOuterInnerInfill) },
{ "infill/inner wall/outer wall", int(WallInfillOrder::InfillInnerOuter) },
{ "infill/outer wall/inner wall", int(WallInfillOrder::InfillOuterInner) },
{ "inner-outer-inner wall/infill", int(WallInfillOrder::InnerOuterInnerInfill)}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(WallInfillOrder)
//BBS
static t_config_enum_values s_keys_map_WallSequence {
{ "inner wall/outer wall", int(WallSequence::InnerOuter) },
{ "outer wall/inner wall", int(WallSequence::OuterInner) },
{ "inner-outer-inner wall", int(WallSequence::InnerOuterInner)}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(WallSequence)
//BBS
static t_config_enum_values s_keys_map_PrintSequence {
{ "by layer", int(PrintSequence::ByLayer) },
{ "by object", int(PrintSequence::ByObject) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrintSequence)
static t_config_enum_values s_keys_map_SlicingMode {
{ "regular", int(SlicingMode::Regular) },
{ "even_odd", int(SlicingMode::EvenOdd) },
{ "close_holes", int(SlicingMode::CloseHoles) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SlicingMode)
static t_config_enum_values s_keys_map_SupportMaterialPattern {
{ "rectilinear", smpRectilinear },
{ "rectilinear-grid", smpRectilinearGrid },
{ "honeycomb", smpHoneycomb },
{ "lightning", smpLightning },
{ "default", smpDefault},
{ "hollow", smpNone},
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SupportMaterialPattern)
static t_config_enum_values s_keys_map_SupportMaterialStyle {
{ "default", smsDefault },
{ "grid", smsGrid },
{ "snug", smsSnug },
{ "tree_slim", smsTreeSlim },
{ "tree_strong", smsTreeStrong },
{ "tree_hybrid", smsTreeHybrid },
{ "organic", smsOrganic }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SupportMaterialStyle)
static t_config_enum_values s_keys_map_SupportMaterialInterfacePattern {
{ "auto", smipAuto },
{ "rectilinear", smipRectilinear },
{ "concentric", smipConcentric },
{ "rectilinear_interlaced", smipRectilinearInterlaced},
{ "grid", smipGrid }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SupportMaterialInterfacePattern)
static t_config_enum_values s_keys_map_SupportType{
{ "normal(auto)", stNormalAuto },
{ "tree(auto)", stTreeAuto },
{ "normal(manual)", stNormal },
{ "tree(manual)", stTree }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SupportType)
static t_config_enum_values s_keys_map_SeamPosition {
{ "nearest", spNearest },
{ "aligned", spAligned },
{ "back", spRear },
{ "random", spRandom },
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SeamPosition)
static const t_config_enum_values s_keys_map_SLADisplayOrientation = {
{ "landscape", sladoLandscape},
{ "portrait", sladoPortrait}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SLADisplayOrientation)
static const t_config_enum_values s_keys_map_SLAPillarConnectionMode = {
{"zigzag", slapcmZigZag},
{"cross", slapcmCross},
{"dynamic", slapcmDynamic}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SLAPillarConnectionMode)
static const t_config_enum_values s_keys_map_SLAMaterialSpeed = {
{"slow", slamsSlow},
{"fast", slamsFast}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SLAMaterialSpeed);
static const t_config_enum_values s_keys_map_BrimType = {
{"no_brim", btNoBrim},
{"outer_only", btOuterOnly},
{"inner_only", btInnerOnly},
{"outer_and_inner", btOuterAndInner},
{"auto_brim", btAutoBrim}, // BBS
{"brim_ears", btEar}, // Orca
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(BrimType)
// using 0,1 to compatible with old files
static const t_config_enum_values s_keys_map_TimelapseType = {
{"0", tlTraditional},
{"1", tlSmooth}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(TimelapseType)
static const t_config_enum_values s_keys_map_DraftShield = {
{ "disabled", dsDisabled },
{ "limited", dsLimited },
{ "enabled", dsEnabled }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(DraftShield)
static const t_config_enum_values s_keys_map_ForwardCompatibilitySubstitutionRule = {
{ "disable", ForwardCompatibilitySubstitutionRule::Disable },
{ "enable", ForwardCompatibilitySubstitutionRule::Enable },
{ "enable_silent", ForwardCompatibilitySubstitutionRule::EnableSilent }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(ForwardCompatibilitySubstitutionRule)
static const t_config_enum_values s_keys_map_OverhangFanThreshold = {
{ "0%", Overhang_threshold_none },
{ "10%", Overhang_threshold_1_4 },
{ "25%", Overhang_threshold_2_4 },
{ "50%", Overhang_threshold_3_4 },
{ "75%", Overhang_threshold_4_4 },
{ "95%", Overhang_threshold_bridge }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(OverhangFanThreshold)
// BBS
static const t_config_enum_values s_keys_map_BedType = {
{ "Default Plate", btDefault },
{ "Cool Plate", btPC },
{ "Engineering Plate", btEP },
{ "High Temp Plate", btPEI },
{ "Textured PEI Plate", btPTE }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(BedType)
// BBS
static const t_config_enum_values s_keys_map_FirstLayerSeq = {
{ "Auto", flsAuto },
{ "Customize", flsCutomize },
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(FirstLayerSeq)
static t_config_enum_values s_keys_map_NozzleType {
{ "undefine", int(NozzleType::ntUndefine) },
{ "hardened_steel", int(NozzleType::ntHardenedSteel) },
{ "stainless_steel",int(NozzleType::ntStainlessSteel) },
{ "brass", int(NozzleType::ntBrass) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(NozzleType)
static t_config_enum_values s_keys_map_PrinterStructure {
{"undefine", int(PrinterStructure::psUndefine)},
{"corexy", int(PrinterStructure::psCoreXY)},
{"i3", int(PrinterStructure::psI3)},
{"hbot", int(PrinterStructure::psHbot)},
{"delta", int(PrinterStructure::psDelta)}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PrinterStructure)
static t_config_enum_values s_keys_map_PerimeterGeneratorType{
{ "classic", int(PerimeterGeneratorType::Classic) },
{ "arachne", int(PerimeterGeneratorType::Arachne) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(PerimeterGeneratorType)
static const t_config_enum_values s_keys_map_ZHopType = {
{ "Auto Lift", zhtAuto },
{ "Normal Lift", zhtNormal },
{ "Slope Lift", zhtSlope },
{ "Spiral Lift", zhtSpiral }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(ZHopType)
static const t_config_enum_values s_keys_map_RetractLiftEnforceType = {
{"All Surfaces", rletAllSurfaces},
{"Top Only", rletTopOnly},
{"Bottom Only", rletBottomOnly},
{"Top and Bottom", rletTopAndBottom}
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(RetractLiftEnforceType)
static const t_config_enum_values s_keys_map_GCodeThumbnailsFormat = {
{ "PNG", int(GCodeThumbnailsFormat::PNG) },
{ "JPG", int(GCodeThumbnailsFormat::JPG) },
{ "QOI", int(GCodeThumbnailsFormat::QOI) },
{ "BTT_TFT", int(GCodeThumbnailsFormat::BTT_TFT) },
{ "ColPic", int(GCodeThumbnailsFormat::ColPic) }
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(GCodeThumbnailsFormat)
static void assign_printer_technology_to_unknown(t_optiondef_map &options, PrinterTechnology printer_technology)
{
for (std::pair<const t_config_option_key, ConfigOptionDef> &kvp : options)
if (kvp.second.printer_technology == ptUnknown)
kvp.second.printer_technology = printer_technology;
}
PrintConfigDef::PrintConfigDef()
{
this->init_common_params();
assign_printer_technology_to_unknown(this->options, ptAny);
this->init_fff_params();
this->init_extruder_option_keys();
assign_printer_technology_to_unknown(this->options, ptFFF);
this->init_sla_params();
assign_printer_technology_to_unknown(this->options, ptSLA);
}
void PrintConfigDef::init_common_params()
{
ConfigOptionDef* def;
def = this->add("printer_technology", coEnum);
//def->label = L("Printer technology");
def->label = "Printer technology";
//def->tooltip = L("Printer technology");
def->enum_keys_map = &ConfigOptionEnum<PrinterTechnology>::get_enum_values();
def->enum_values.push_back("FFF");
def->enum_values.push_back("SLA");
def->set_default_value(new ConfigOptionEnum<PrinterTechnology>(ptFFF));
def = this->add("printable_area", coPoints);
def->label = L("Printable area");
//BBS
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPoints{ Vec2d(0, 0), Vec2d(200, 0), Vec2d(200, 200), Vec2d(0, 200) });
//BBS: add "bed_exclude_area"
def = this->add("bed_exclude_area", coPoints);
def->label = L("Bed exclude area");
def->tooltip = L("Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. "
"The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"");
def->mode = comAdvanced;
def->gui_type = ConfigOptionDef::GUIType::one_string;
def->set_default_value(new ConfigOptionPoints{ Vec2d(0, 0) });
def = this->add("bed_custom_texture", coString);
def->label = L("Bed custom texture");
def->mode = comAdvanced;
def->gui_type = ConfigOptionDef::GUIType::one_string;
def->set_default_value(new ConfigOptionString(""));
def = this->add("bed_custom_model", coString);
def->label = L("Bed custom model");
def->mode = comAdvanced;
def->gui_type = ConfigOptionDef::GUIType::one_string;
def->set_default_value(new ConfigOptionString(""));
def = this->add("elefant_foot_compensation", coFloat);
def->label = L("Elephant foot compensation");
def->category = L("Quality");
def->tooltip = L("Shrink the initial layer on build plate to compensate for elephant foot effect");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("elefant_foot_compensation_layers", coInt);
def->label = L("Elephant foot compensation layers");
def->category = L("Quality");
def->tooltip = L("The number of layers on which the elephant foot compensation will be active. "
"The first layer will be shrunk by the elephant foot compensation value, then "
"the next layers will be linearly shrunk less, up to the layer indicated by this value.");
def->sidetext = L("layers");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("layer_height", coFloat);
def->label = L("Layer height");
def->category = L("Quality");
def->tooltip = L("Slicing height for each layer. Smaller layer height means more accurate and more printing time");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.2));
def = this->add("printable_height", coFloat);
def->label = L("Printable height");
def->tooltip = L("Maximum printable height which is limited by mechanism of printer");
def->sidetext = L("mm");
def->min = 0;
def->max = 2000;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(100.0));
def = this->add("preferred_orientation", coFloat);
def->label = L("Preferred orientation");
def->tooltip = L("Automatically orient stls on the Z-axis upon initial import");
def->sidetext = L("°");
def->max = 360;
def->min = -360;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.0));
// Options used by physical printers
def = this->add("preset_names", coStrings);
def->label = L("Printer preset names");
//def->tooltip = L("Names of presets related to the physical printer");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionStrings());
def = this->add("print_host", coString);
def->label = L("Hostname, IP or URL");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. "
"Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL "
"in the following format: https://username:password@your-octopi-address/");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
def = this->add("print_host_webui", coString);
def->label = L("Device UI");
def->tooltip = L("Specify the URL of your device user interface if it's not same as print_host");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
def = this->add("printhost_apikey", coString);
def->label = L("API Key / Password");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication.");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
def = this->add("printhost_port", coString);
def->label = L("Printer");
def->tooltip = L("Name of the printer");
def->gui_type = ConfigOptionDef::GUIType::select_open;
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
def = this->add("printhost_cafile", coString);
def->label = L("HTTPS CA File");
def->tooltip = L("Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. "
"If left blank, the default OS CA certificate repository is used.");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
// Options used by physical printers
def = this->add("printhost_user", coString);
def->label = L("User");
// def->tooltip = "";
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
def = this->add("printhost_password", coString);
def->label = L("Password");
// def->tooltip = "";
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionString(""));
// Only available on Windows.
def = this->add("printhost_ssl_ignore_revoke", coBool);
def->label = L("Ignore HTTPS certificate revocation checks");
def->tooltip = L("Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. "
"One may want to enable this option for self signed certificates if connection fails.");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("preset_names", coStrings);
def->label = L("Printer preset names");
def->tooltip = L("Names of presets related to the physical printer");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings());
def = this->add("printhost_authorization_type", coEnum);
def->label = L("Authorization Type");
// def->tooltip = "";
def->enum_keys_map = &ConfigOptionEnum<AuthorizationType>::get_enum_values();
def->enum_values.push_back("key");
def->enum_values.push_back("user");
def->enum_labels.push_back(L("API key"));
def->enum_labels.push_back(L("HTTP digest"));
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionEnum<AuthorizationType>(atKeyPassword));
// temporary workaround for compatibility with older Slicer
{
def = this->add("preset_name", coString);
def->set_default_value(new ConfigOptionString());
}
}
void PrintConfigDef::init_fff_params()
{
ConfigOptionDef* def;
// Maximum extruder temperature, bumped to 1500 to support printing of glass.
const int max_temp = 1500;
def = this->add("reduce_crossing_wall", coBool);
def->label = L("Avoid crossing wall");
def->category = L("Quality");
def->tooltip = L("Detour and avoid to travel across wall which may cause blob on surface");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("max_travel_detour_distance", coFloatOrPercent);
def->label = L("Avoid crossing wall - Max detour length");
def->category = L("Quality");
def->tooltip = L("Maximum detour distance for avoiding crossing wall. "
"Don't detour if the detour distance is large than this value. "
"Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable");
def->sidetext = L("mm or %");
def->min = 0;
def->max_literal = 1000;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
// BBS
def = this->add("cool_plate_temp", coInts);
def->label = L("Other layers");
def->tooltip = L("Bed temperature for layers except the initial one. "
"Value 0 means the filament does not support to print on the Cool Plate");
def->sidetext = L("°C");
def->full_label = L("Bed temperature");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{ 35 });
def = this->add("eng_plate_temp", coInts);
def->label = L("Other layers");
def->tooltip = L("Bed temperature for layers except the initial one. "
"Value 0 means the filament does not support to print on the Engineering Plate");
def->sidetext = L("°C");
def->full_label = L("Bed temperature");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{ 45 });
def = this->add("hot_plate_temp", coInts);
def->label = L("Other layers");
def->tooltip = L("Bed temperature for layers except the initial one. "
"Value 0 means the filament does not support to print on the High Temp Plate");
def->sidetext = L("°C");
def->full_label = L("Bed temperature");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{ 45 });
def = this->add("textured_plate_temp", coInts);
def->label = L("Other layers");
def->tooltip = L("Bed temperature for layers except the initial one. "
"Value 0 means the filament does not support to print on the Textured PEI Plate");
def->sidetext = L("°C");
def->full_label = L("Bed temperature");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{45});
def = this->add("cool_plate_temp_initial_layer", coInts);
def->label = L("Initial layer");
def->full_label = L("Initial layer bed temperature");
def->tooltip = L("Bed temperature of the initial layer. "
"Value 0 means the filament does not support to print on the Cool Plate");
def->sidetext = L("°C");
def->min = 0;
def->max = 120;
def->set_default_value(new ConfigOptionInts{ 35 });
def = this->add("eng_plate_temp_initial_layer", coInts);
def->label = L("Initial layer");
def->full_label = L("Initial layer bed temperature");
def->tooltip = L("Bed temperature of the initial layer. "
"Value 0 means the filament does not support to print on the Engineering Plate");
def->sidetext = L("°C");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{ 45 });
def = this->add("hot_plate_temp_initial_layer", coInts);
def->label = L("Initial layer");
def->full_label = L("Initial layer bed temperature");
def->tooltip = L("Bed temperature of the initial layer. "
"Value 0 means the filament does not support to print on the High Temp Plate");
def->sidetext = L("°C");
def->max = 300;
def->set_default_value(new ConfigOptionInts{ 45 });
def = this->add("textured_plate_temp_initial_layer", coInts);
def->label = L("Initial layer");
def->full_label = L("Initial layer bed temperature");
def->tooltip = L("Bed temperature of the initial layer. "
"Value 0 means the filament does not support to print on the Textured PEI Plate");
def->sidetext = L("°C");
def->min = 0;
def->max = 300;
def->set_default_value(new ConfigOptionInts{45});
def = this->add("curr_bed_type", coEnum);
def->label = L("Bed type");
def->tooltip = L("Bed types supported by the printer");
def->mode = comSimple;
def->enum_keys_map = &s_keys_map_BedType;
def->enum_values.emplace_back("Cool Plate");
def->enum_values.emplace_back("Engineering Plate");
def->enum_values.emplace_back("High Temp Plate");
def->enum_values.emplace_back("Textured PEI Plate");
def->enum_labels.emplace_back(L("Cool Plate"));
def->enum_labels.emplace_back(L("Engineering Plate"));
def->enum_labels.emplace_back(L("Smooth PEI Plate / High Temp Plate"));
def->enum_labels.emplace_back(L("Textured PEI Plate"));
def->set_default_value(new ConfigOptionEnum<BedType>(btPC));
// BBS
def = this->add("first_layer_print_sequence", coInts);
def->label = L("First layer print sequence");
def->min = 0;
def->max = 16;
def->set_default_value(new ConfigOptionInts{0});
def = this->add("first_layer_sequence_choice", coEnum);
def->category = L("Quality");
def->label = L("First layer filament sequence");
def->enum_keys_map = &ConfigOptionEnum<FirstLayerSeq>::get_enum_values();
def->enum_values.push_back("Auto");
def->enum_values.push_back("Customize");
def->enum_labels.push_back(L("Auto"));
def->enum_labels.push_back(L("Customize"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<FirstLayerSeq>(flsAuto));
def = this->add("before_layer_change_gcode", coString);
def->label = L("Before layer change G-code");
def->tooltip = L("This G-code is inserted at every layer change before lifting z");
def->multiline = true;
def->full_width = true;
def->height = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("bottom_shell_layers", coInt);
def->label = L("Bottom shell layers");
def->category = L("Strength");
def->tooltip = L("This is the number of solid layers of bottom shell, including the bottom "
"surface layer. When the thickness calculated by this value is thinner "
"than bottom shell thickness, the bottom shell layers will be increased");
def->full_label = L("Bottom shell layers");
def->min = 0;
def->set_default_value(new ConfigOptionInt(3));
def = this->add("bottom_shell_thickness", coFloat);
def->label = L("Bottom shell thickness");
def->category = L("Strength");
def->tooltip = L("The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is "
"thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that "
"this setting is disabled and thickness of bottom shell is absolutely determained by bottom shell layers");
def->full_label = L("Bottom shell thickness");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("enable_overhang_bridge_fan", coBools);
def->label = L("Force cooling for overhang and bridge");
def->tooltip = L("Enable this option to optimize part cooling fan speed for overhang and bridge to get better cooling");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBools{ true });
def = this->add("overhang_fan_speed", coInts);
def->label = L("Fan speed for overhang");
def->tooltip = L("Force part cooling fan to be this speed when printing bridge or overhang wall which has large overhang degree. "
"Forcing cooling for overhang and bridge can get better quality for these part");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts { 100 });
def = this->add("overhang_fan_threshold", coEnums);
def->label = L("Cooling overhang threshold");
def->tooltip = L("Force cooling fan to be specific speed when overhang degree of printed part exceeds this value. "
"Expressed as percentage which indicides how much width of the line without support from lower layer. "
"0% means forcing cooling for all outer wall no matter how much overhang degree");
def->sidetext = "";
def->enum_keys_map = &ConfigOptionEnum<OverhangFanThreshold>::get_enum_values();
def->mode = comAdvanced;
def->enum_values.emplace_back("0%");
def->enum_values.emplace_back("10%");
def->enum_values.emplace_back("25%");
def->enum_values.emplace_back("50%");
def->enum_values.emplace_back("75%");
def->enum_values.emplace_back("95%");
def->enum_labels.emplace_back("0%");
def->enum_labels.emplace_back("10%");
def->enum_labels.emplace_back("25%");
def->enum_labels.emplace_back("50%");
def->enum_labels.emplace_back("75%");
def->enum_labels.emplace_back("95%");
def->set_default_value(new ConfigOptionEnumsGeneric{ (int)Overhang_threshold_bridge });
def = this->add("bridge_angle", coFloat);
def->label = L("Bridge infill direction");
def->category = L("Strength");
def->tooltip = L("Bridging angle override. If left to zero, the bridging angle will be calculated "
"automatically. Otherwise the provided angle will be used for external bridges. "
"Use 180°for zero angle.");
def->sidetext = L("°");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("bridge_density", coPercent);
def->label = L("Bridge density");
def->category = L("Strength");
def->tooltip = L("Density of external bridges. 100% means solid bridge. Default is 100%.");
def->sidetext = L("%");
def->min = 10;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("bridge_flow", coFloat);
def->label = L("Bridge flow ratio");
def->category = L("Quality");
def->tooltip = L("Decrease this value slightly(for example 0.9) to reduce the amount of material for bridge, "
"to improve sag");
def->min = 0;
def->max = 2.0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("internal_bridge_flow", coFloat);
def->label = L("Internal bridge flow ratio");
def->category = L("Quality");
def->tooltip = L("This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill.");
def->min = 0;
def->max = 2.0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("top_solid_infill_flow_ratio", coFloat);
def->label = L("Top surface flow ratio");
def->category = L("Advanced");
def->tooltip = L("This factor affects the amount of material for top solid infill. "
"You can decrease it slightly to have smooth surface finish");
def->min = 0;
def->max = 2;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("bottom_solid_infill_flow_ratio", coFloat);
def->label = L("Bottom surface flow ratio");
def->category = L("Advanced");
def->tooltip = L("This factor affects the amount of material for bottom solid infill");
def->min = 0;
def->max = 2;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("precise_outer_wall",coBool);
def->label = L("Precise wall(experimental)");
def->category = L("Quality");
def->tooltip = L("Improve shell precision by adjusting outer wall spacing. This also improves layer consistency.");
def->set_default_value(new ConfigOptionBool{false});
def = this->add("only_one_wall_top", coBool);
def->label = L("Only one wall on top surfaces");
def->category = L("Quality");
def->tooltip = L("Use only one wall on flat top surface, to give more space to the top infill pattern");
def->set_default_value(new ConfigOptionBool(false));
// the tooltip is copied from SuperStudio
def = this->add("min_width_top_surface", coFloatOrPercent);
def->label = L("One wall threshold");
def->category = L("Quality");
def->tooltip = L("If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value."
" This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters."
" This value can be a mm or a % of the perimeter extrusion width."
"\nWarning: If enabled, artifacts can be created is you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts.");
def->sidetext = L("mm or %");
def->ratio_over = "inner_wall_line_width";
def->min = 0;
def->max_literal = 15;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(300, true));
def = this->add("only_one_wall_first_layer", coBool);
def->label = L("Only one wall on first layer");
def->category = L("Quality");
def->tooltip = L("Use only one wall on first layer, to give more space to the bottom infill pattern");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("extra_perimeters_on_overhangs", coBool);
def->label = L("Extra perimeters on overhangs");
def->category = L("Quality");
def->tooltip = L("Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored. ");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("overhang_reverse", coBool);
def->label = L("Reverse on odd");
def->full_label = L("Overhang reversal");
def->category = L("Quality");
def->tooltip = L("Extrude perimeters that have a part over an overhang in the reverse direction on odd layers. This alternating pattern can drastically improve steep overhangs.\n\nThis setting can also help reduce part warping due to the reduction of stresses in the part walls.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("overhang_reverse_internal_only", coBool);
def->label = L("Reverse only internal perimeters");
def->full_label = L("Reverse only internal perimeters");
def->category = L("Quality");
def->tooltip = L("Apply the reverse perimeters logic only on internal perimeters. \n\nThis setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n\nFor this setting to be the most effective, it is recomended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on odd layers irrespective of their overhang degree.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("overhang_reverse_threshold", coFloatOrPercent);
def->label = L("Reverse threshold");
def->full_label = L("Overhang reversal threshold");
def->category = L("Quality");
def->tooltip = L("Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width."
"\nValue 0 enables reversal on every odd layers regardless.");
def->sidetext = L("mm or %");
def->ratio_over = "line_width";
def->min = 0;
def->max_literal = 20;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
def = this->add("overhang_speed_classic", coBool);
def->label = L("Classic mode");
def->category = L("Speed");
def->tooltip = L("Enable this option to use classic mode");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ false });
def = this->add("enable_overhang_speed", coBool);
def->label = L("Slow down for overhang");
def->category = L("Speed");
def->tooltip = L("Enable this option to slow printing down for different overhang degree");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ true });
def = this->add("slowdown_for_curled_perimeters", coBool);
def->label = L("Slow down for curled perimeters");
def->category = L("Speed");
def->tooltip = L("Enable this option to slow printing down in areas where potential curled perimeters may exist");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ false });
def = this->add("overhang_1_4_speed", coFloatOrPercent);
def->label = "(10%, 25%)";
def->category = L("Speed");
def->full_label = "(10%, 25%)";
//def->tooltip = L("Speed for line of wall which has degree of overhang between 10% and 25% line width. "
// "0 means using original wall speed");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
def = this->add("overhang_2_4_speed", coFloatOrPercent);
def->label = "[25%, 50%)";
def->category = L("Speed");
def->full_label = "[25%, 50%)";
//def->tooltip = L("Speed for line of wall which has degree of overhang between 25% and 50% line width. "
// "0 means using original wall speed");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
def = this->add("overhang_3_4_speed", coFloatOrPercent);
def->label = "[50%, 75%)";
def->category = L("Speed");
def->full_label = "[50%, 75%)";
//def->tooltip = L("Speed for line of wall which has degree of overhang between 50% and 75% line width. 0 means using original wall speed");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
def = this->add("overhang_4_4_speed", coFloatOrPercent);
def->label = "[75%, 100%)";
def->category = L("Speed");
def->full_label = "[75%, 100%)";
//def->tooltip = L("Speed for line of wall which has degree of overhang between 75% and 100% line width. 0 means using original wall speed");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
def = this->add("bridge_speed", coFloat);
def->label = L("External");
def->category = L("Speed");
def->tooltip = L("Speed of bridge and completely overhang wall");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(25));
def = this->add("internal_bridge_speed", coFloatOrPercent);
def->label = L("Internal");
def->category = L("Speed");
def->tooltip = L("Speed of internal bridge. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%.");
def->sidetext = L("mm/s or %");
def->ratio_over = "bridge_speed";
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(150, true));
def = this->add("brim_width", coFloat);
def->label = L("Brim width");
def->category = L("Support");
def->tooltip = L("Distance from model to the outermost brim line");
def->sidetext = L("mm");
def->min = 0;
def->max = 100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("brim_type", coEnum);
def->label = L("Brim type");
def->category = L("Support");
def->tooltip = L("This controls the generation of the brim at outer and/or inner side of models. "
"Auto means the brim width is analysed and calculated automatically.");
def->enum_keys_map = &ConfigOptionEnum<BrimType>::get_enum_values();
def->enum_values.emplace_back("auto_brim");
def->enum_values.emplace_back("brim_ears");
def->enum_values.emplace_back("outer_only");
def->enum_values.emplace_back("inner_only");
def->enum_values.emplace_back("outer_and_inner");
def->enum_values.emplace_back("no_brim");
def->enum_labels.emplace_back(L("Auto"));
def->enum_labels.emplace_back(L("Mouse ear"));
def->enum_labels.emplace_back(L("Outer brim only"));
def->enum_labels.emplace_back(L("Inner brim only"));
def->enum_labels.emplace_back(L("Outer and inner brim"));
def->enum_labels.emplace_back(L("No-brim"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<BrimType>(btAutoBrim));
def = this->add("brim_object_gap", coFloat);
def->label = L("Brim-object gap");
def->category = L("Support");
def->tooltip = L("A gap between innermost brim line and object can make brim be removed more easily");
def->sidetext = L("mm");
def->min = 0;
def->max = 2;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("brim_ears", coBool);
def->label = L("Brim ears");
def->category = L("Support");
def->tooltip = L("Only draw brim over the sharp edges of the model.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("brim_ears_max_angle", coFloat);
def->label = L("Brim ear max angle");
def->category = L("Support");
def->tooltip = L("Maximum angle to let a brim ear appear. \nIf set to 0, no brim will be created. \nIf set to "
"~180, brim will be created on everything but straight sections.");
def->sidetext = L("°");
def->min = 0;
def->max = 180;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(125));
def = this->add("brim_ears_detection_length", coFloat);
def->label = L("Brim ear detection radius");
def->category = L("Support");
def->tooltip = L("The geometry will be decimated before dectecting sharp angles. This parameter indicates the "
"minimum length of the deviation for the decimation."
"\n0 to deactivate");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("compatible_printers", coStrings);
def->label = L("Compatible machine");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
//BBS.
def = this->add("upward_compatible_machine", coStrings);
def->label = L("upward compatible machine");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("compatible_printers_condition", coString);
def->label = L("Compatible machine condition");
//def->tooltip = L("A boolean expression using the configuration values of an active printer profile. "
// "If this expression evaluates to true, this profile is considered compatible "
// "with the active printer profile.");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("compatible_prints", coStrings);
def->label = L("Compatible process profiles");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("compatible_prints_condition", coString);
def->label = L("Compatible process profiles condition");
//def->tooltip = L("A boolean expression using the configuration values of an active print profile. "
// "If this expression evaluates to true, this profile is considered compatible "
// "with the active print profile.");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
// The following value is to be stored into the project file (AMF, 3MF, Config ...)
// and it contains a sum of "compatible_printers_condition" values over the print and filament profiles.
def = this->add("compatible_machine_expression_group", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("compatible_process_expression_group", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
//BBS: add logic for checking between different system presets
def = this->add("different_settings_to_system", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("print_compatible_printers", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("print_sequence", coEnum);
def->label = L("Print sequence");
def->tooltip = L("Print sequence, layer by layer or object by object");
def->enum_keys_map = &ConfigOptionEnum<PrintSequence>::get_enum_values();
def->enum_values.push_back("by layer");
def->enum_values.push_back("by object");
def->enum_labels.push_back(L("By layer"));
def->enum_labels.push_back(L("By object"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<PrintSequence>(PrintSequence::ByLayer));
def = this->add("slow_down_for_layer_cooling", coBools);
def->label = L("Slow printing down for better layer cooling");
def->tooltip = L("Enable this option to slow printing speed down to make the final layer time not shorter than "
"the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for longer time. "
"This can improve the cooling quality for needle and small details");
def->set_default_value(new ConfigOptionBools { true });
def = this->add("default_acceleration", coFloat);
def->label = L("Normal printing");
def->tooltip = L("The default acceleration of both normal printing and travel except initial layer");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500.0));
def = this->add("default_filament_profile", coStrings);
def->label = L("Default filament profile");
def->tooltip = L("Default filament profile when switch to this machine profile");
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("default_print_profile", coString);
def->label = L("Default process profile");
def->tooltip = L("Default process profile when switch to this machine profile");
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("activate_air_filtration",coBools);
def->label = L("Activate air filtration");
def->tooltip = L("Activate for better air filtration. G-code command: M106 P3 S(0-255)");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBools{false});
def = this->add("during_print_exhaust_fan_speed", coInts);
def->label = L("Fan speed");
def->tooltip=L("Speed of exhuast fan during printing.This speed will overwrite the speed in filament custom gcode");
def->sidetext = L("%");
def->min=0;
def->max=100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInts{60});
def = this->add("complete_print_exhaust_fan_speed", coInts);
def->label = L("Fan speed");
def->sidetext = L("%");
def->tooltip=L("Speed of exhuast fan after printing completes");
def->min=0;
def->max=100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInts{80});
def = this->add("close_fan_the_first_x_layers", coInts);
def->label = L("No cooling for the first");
def->tooltip = L("Close all cooling fan for the first certain layers. Cooling fan of the first layer used to be closed "
"to get better build plate adhesion");
def->sidetext = L("layers");
def->min = 0;
def->max = 1000;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInts { 1 });
def = this->add("bridge_no_support", coBool);
def->label = L("Don't support bridges");
def->category = L("Support");
def->tooltip = L("Don't support the whole bridge area which make support very large. "
"Bridge usually can be printing directly without support if not very long");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("thick_bridges", coBool);
def->label = L("Thick bridges");
def->category = L("Quality");
def->tooltip = L("If enabled, bridges are more reliable, can bridge longer distances, but may look worse. "
"If disabled, bridges look better but are reliable just for shorter bridged distances.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("thick_internal_bridges", coBool);
def->label = L("Thick internal bridges");
def->category = L("Quality");
def->tooltip = L("If enabled, thick internal bridges will be used. It's usually recommended to have this feature turned on. However, "
"consider turning it off if you are using large nozzles.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("max_bridge_length", coFloat);
def->label = L("Max bridge length");
def->category = L("Support");
def->tooltip = L("Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10));
def = this->add("machine_end_gcode", coString);
def->label = L("End G-code");
def->tooltip = L("End G-code when finish the whole printing");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString("M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n"));
def = this->add("printing_by_object_gcode", coString);
def->label = L("Between Object Gcode");
def->tooltip = L("Insert Gcode between objects. This parameter will only come into effect when you print your models object by object");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("filament_end_gcode", coStrings);
def->label = L("End G-code");
def->tooltip = L("End G-code when finish the printing of this filament");
def->multiline = true;
def->full_width = true;
def->height = 120;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings { " " });
def = this->add("ensure_vertical_shell_thickness", coBool);
def->label = L("Ensure vertical shell thickness");
def->category = L("Strength");
def->tooltip = L("Add solid infill near sloping surfaces to guarantee the vertical shell thickness "
"(top+bottom solid layers)");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
auto def_top_fill_pattern = def = this->add("top_surface_pattern", coEnum);
def->label = L("Top surface pattern");
def->category = L("Strength");
def->tooltip = L("Line pattern of top surface infill");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("concentric");
def->enum_values.push_back("zig-zag");
def->enum_values.push_back("monotonic");
def->enum_values.push_back("monotonicline");
def->enum_values.push_back("alignedrectilinear");
def->enum_values.push_back("hilbertcurve");
def->enum_values.push_back("archimedeanchords");
def->enum_values.push_back("octagramspiral");
def->enum_labels.push_back(L("Concentric"));
def->enum_labels.push_back(L("Rectilinear"));
def->enum_labels.push_back(L("Monotonic"));
def->enum_labels.push_back(L("Monotonic line"));
def->enum_labels.push_back(L("Aligned Rectilinear"));
def->enum_labels.push_back(L("Hilbert Curve"));
def->enum_labels.push_back(L("Archimedean Chords"));
def->enum_labels.push_back(L("Octagram Spiral"));
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonic));
def = this->add("bottom_surface_pattern", coEnum);
def->label = L("Bottom surface pattern");
def->category = L("Strength");
def->tooltip = L("Line pattern of bottom surface infill, not bridge infill");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values = def_top_fill_pattern->enum_values;
def->enum_labels = def_top_fill_pattern->enum_labels;
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonic));
def = this->add("internal_solid_infill_pattern", coEnum);
def->label = L("Internal solid infill pattern");
def->category = L("Strength");
def->tooltip = L("Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area.");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values = def_top_fill_pattern->enum_values;
def->enum_labels = def_top_fill_pattern->enum_labels;
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonic));
def = this->add("outer_wall_line_width", coFloatOrPercent);
def->label = L("Outer wall");
def->category = L("Quality");
def->tooltip = L("Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("outer_wall_speed", coFloat);
def->label = L("Outer wall");
def->category = L("Speed");
def->tooltip = L("Speed of outer wall which is outermost and visible. "
"It's used to be slower than inner wall speed to get better quality.");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60));
def = this->add("small_perimeter_speed", coFloatOrPercent);
def->label = L("Small perimeters");
def->category = L("Speed");
def->tooltip = L("This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold "
"(usually holes). If expressed as percentage (for example: 80%) it will be calculated "
"on the outer wall speed setting above. Set to zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
def = this->add("small_perimeter_threshold", coFloat);
def->label = L("Small perimeters threshold");
def->category = L("Speed");
def->tooltip = L("This sets the threshold for small perimeter length. Default threshold is 0mm");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("wall_sequence", coEnum);
def->label = L("Walls printing order");
def->category = L("Quality");
def->tooltip = L("Print sequence of the internal (inner) and external (outer) walls. \n\nUse Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n\nUse Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recomended against the Outer/Inner option in most cases. \n\nUse Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.\n\n ");
def->enum_keys_map = &ConfigOptionEnum<WallSequence>::get_enum_values();
def->enum_values.push_back("inner wall/outer wall");
def->enum_values.push_back("outer wall/inner wall");
def->enum_values.push_back("inner-outer-inner wall");
def->enum_labels.push_back(L("Inner/Outer"));
def->enum_labels.push_back(L("Outer/Inner"));
def->enum_labels.push_back(L("Inner/Outer/Inner"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<WallSequence>(WallSequence::InnerOuter));
def = this->add("is_infill_first",coBool);
def->label = L("Print infill first");
def->tooltip = L("Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n\nPrinting walls first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slighly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part.");
def->category = L("Quality");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{false});
def = this->add("extruder", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Extruder");
def->category = L("Extruders");
//def->tooltip = L("The extruder to use (unless more specific extruder settings are specified). "
// "This value overrides perimeter and infill extruders, but not the support extruders.");
def->min = 0; // 0 = inherit defaults
def->enum_labels.push_back(L("default")); // override label for item 0
def->enum_labels.push_back("1");
def->enum_labels.push_back("2");
def->enum_labels.push_back("3");
def->enum_labels.push_back("4");
def->enum_labels.push_back("5");
def->mode = comAdvanced;
def = this->add("extruder_clearance_height_to_rod", coFloat);
def->label = L("Height to rod");
def->tooltip = L("Distance of the nozzle tip to the lower rod. "
"Used for collision avoidance in by-object printing.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(40));
// BBS
def = this->add("extruder_clearance_height_to_lid", coFloat);
def->label = L("Height to lid");
def->tooltip = L("Distance of the nozzle tip to the lid. "
"Used for collision avoidance in by-object printing.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(120));
def = this->add("extruder_clearance_radius", coFloat);
def->label = L("Radius");
def->tooltip = L("Clearance radius around extruder. Used for collision avoidance in by-object printing.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(40));
def = this->add("extruder_colour", coStrings);
def->label = L("Extruder Color");
def->tooltip = L("Only used as a visual help on UI");
def->gui_type = ConfigOptionDef::GUIType::color;
// Empty string means no color assigned yet.
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings { "" });
def = this->add("extruder_offset", coPoints);
def->label = L("Extruder offset");
//def->tooltip = L("If your firmware doesn't handle the extruder displacement you need the G-code "
// "to take it into account. This option lets you specify the displacement of each extruder "
// "with respect to the first one. It expects positive coordinates (they will be subtracted "
// "from the XY coordinate).");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPoints { Vec2d(0,0) });
def = this->add("filament_flow_ratio", coFloats);
def->label = L("Flow ratio");
def->tooltip = L("The material may have volumetric change after switching between molten state and crystalline state. "
"This setting changes all extrusion flow of this filament in gcode proportionally. "
"Recommended value range is between 0.95 and 1.05. "
"Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow");
def->max = 2;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 1. });
def = this->add("print_flow_ratio", coFloat);
def->label = L("Flow ratio");
def->tooltip = L("The material may have volumetric change after switching between molten state and crystalline state. "
"This setting changes all extrusion flow of this filament in gcode proportionally. "
"Recommended value range is between 0.95 and 1.05. "
"Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow");
def->mode = comAdvanced;
def->max = 2;
def->min = 0.01;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("enable_pressure_advance", coBools);
def->label = L("Enable pressure advance");
def->tooltip = L("Enable pressure advance, auto calibration result will be overwriten once enabled.");
def->set_default_value(new ConfigOptionBools{ false });
def = this->add("pressure_advance", coFloats);
def->label = L("Pressure advance");
def->tooltip = L("Pressure advance(Klipper) AKA Linear advance factor(Marlin)");
def->max = 2;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0.02 });
def = this->add("line_width", coFloatOrPercent);
def->label = L("Default");
def->category = L("Quality");
def->tooltip = L("Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
def = this->add("reduce_fan_stop_start_freq", coBools);
def->label = L("Keep fan always on");
def->tooltip = L("If enable this setting, part cooling fan will never be stoped and will run at least "
"at minimum speed to reduce the frequency of starting and stoping");
def->set_default_value(new ConfigOptionBools { false });
def = this->add("fan_cooling_layer_time", coFloats);
def->label = L("Layer time");
def->tooltip = L("Part cooling fan will be enabled for layers of which estimated time is shorter than this value. "
"Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time");
def->sidetext = L("s");
def->min = 0;
def->max = 1000;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats{ 60.0f });
def = this->add("default_filament_colour", coStrings);
def->label = L("Default color");
def->tooltip = L("Default filament color");
def->gui_type = ConfigOptionDef::GUIType::color;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings{""});
def = this->add("filament_colour", coStrings);
def->label = L("Color");
def->tooltip = L("Only used as a visual help on UI");
def->gui_type = ConfigOptionDef::GUIType::color;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings{ "#F2754E" });
// PS
def = this->add("filament_notes", coStrings);
def->label = L("Filament notes");
def->tooltip = L("You can put your notes regarding the filament here.");
def->multiline = true;
def->full_width = true;
def->height = 13;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings { "" });
//bbs
def = this->add("required_nozzle_HRC", coInts);
def->label = L("Required nozzle HRC");
def->tooltip = L("Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC.");
def->min = 0;
def->max = 500;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInts{0});
def = this->add("filament_max_volumetric_speed", coFloats);
def->label = L("Max volumetric speed");
def->tooltip = L("This setting stands for how much volume of filament can be melted and extruded per second. "
"Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. "
"Can't be zero");
def->sidetext = L("mm³/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 2. });
def = this->add("machine_load_filament_time", coFloat);
def->label = L("Filament load time");
def->tooltip = L("Time to load new filament when switch filament. For statistics only");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.0));
def = this->add("machine_unload_filament_time", coFloat);
def->label = L("Filament unload time");
def->tooltip = L("Time to unload old filament when switch filament. For statistics only");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.0));
def = this->add("filament_diameter", coFloats);
def->label = L("Diameter");
def->tooltip = L("Filament diameter is used to calculate extrusion in gcode, so it's important and should be accurate");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloats { 1.75 });
def = this->add("filament_shrink", coPercents);
def->label = L("Shrinkage");
def->tooltip = L("Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm)."
" The part will be scaled in xy to compensate."
" Only the filament used for the perimeter is taken into account."
"\nBe sure to allow enough space between objects, as this compensation is done after the checks.");
def->sidetext = L("%");
def->ratio_over = "";
def->min = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercents{ 100 });
def = this->add("filament_loading_speed", coFloats);
def->label = L("Loading speed");
def->tooltip = L("Speed used for loading the filament on the wipe tower.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 28. });
def = this->add("filament_loading_speed_start", coFloats);
def->label = L("Loading speed at the start");
def->tooltip = L("Speed used at the very beginning of loading phase.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 3. });
def = this->add("filament_unloading_speed", coFloats);
def->label = L("Unloading speed");
def->tooltip = L("Speed used for unloading the filament on the wipe tower (does not affect "
" initial part of unloading just after ramming).");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 90. });
def = this->add("filament_unloading_speed_start", coFloats);
def->label = L("Unloading speed at the start");
def->tooltip = L("Speed used for unloading the tip of the filament immediately after ramming.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 100. });
def = this->add("filament_toolchange_delay", coFloats);
def->label = L("Delay after unloading");
def->tooltip = L("Time to wait after the filament is unloaded. "
"May help to get reliable toolchanges with flexible materials "
"that may need more time to shrink to original dimensions.");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("filament_cooling_moves", coInts);
def->label = L("Number of cooling moves");
def->tooltip = L("Filament is cooled by being moved back and forth in the "
"cooling tubes. Specify desired number of these moves.");
def->max = 0;
def->max = 20;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts { 4 });
def = this->add("filament_cooling_initial_speed", coFloats);
def->label = L("Speed of the first cooling move");
def->tooltip = L("Cooling moves are gradually accelerating beginning at this speed.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 2.2 });
def = this->add("filament_minimal_purge_on_wipe_tower", coFloats);
def->label = L("Minimal purge on wipe tower");
def->tooltip = L("After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet stable. "
"Before purging the print head into an infill or a sacrificial object, Slic3r will always prime "
"this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably.");
def->sidetext = L("mm³");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 15. });
def = this->add("filament_cooling_final_speed", coFloats);
def->label = L("Speed of the last cooling move");
def->tooltip = L("Cooling moves are gradually accelerating towards this speed.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 3.4 });
def = this->add("filament_load_time", coFloats);
def->label = L("Filament load time");
def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator.");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("filament_ramming_parameters", coStrings);
def->label = L("Ramming parameters");
def->tooltip = L("This string is edited by RammingDialog and contains ramming specific parameters.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings { "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|"
" 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" });
def = this->add("filament_unload_time", coFloats);
def->label = L("Filament unload time");
def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator.");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("filament_multitool_ramming", coBools);
def->label = L("Enable ramming for multitool setups");
def->tooltip = L("Perform ramming when using multitool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). "
"When checked, a small amount of filament is rapidly extruded on the wipe tower just before the toolchange. "
"This option is only used when the wipe tower is enabled.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBools { false });
def = this->add("filament_multitool_ramming_volume", coFloats);
def->label = L("Multitool ramming volume");
def->tooltip = L("The volume to be rammed before the toolchange.");
def->sidetext = L("mm³");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 10. });
def = this->add("filament_multitool_ramming_flow", coFloats);
def->label = L("Multitool ramming flow");
def->tooltip = L("Flow used for ramming the filament before the toolchange.");
def->sidetext = L("mm³/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 10. });
def = this->add("filament_density", coFloats);
def->label = L("Density");
def->tooltip = L("Filament density. For statistics only");
def->sidetext = L("g/cm³");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("filament_type", coStrings);
def->label = L("Type");
def->tooltip = L("The material type of filament");
def->gui_type = ConfigOptionDef::GUIType::f_enum_open;
def->gui_flags = "show_value";
def->enum_values.push_back("PLA");
def->enum_values.push_back("ABS");
def->enum_values.push_back("ASA");
def->enum_values.push_back("PETG");
def->enum_values.push_back("TPU");
def->enum_values.push_back("PC");
def->enum_values.push_back("PA");
def->enum_values.push_back("PA-CF");
def->enum_values.push_back("PA6-CF");
def->enum_values.push_back("PLA-CF");
def->enum_values.push_back("PET-CF");
def->enum_values.push_back("PETG-CF");
def->enum_values.push_back("PVA");
def->enum_values.push_back("HIPS");
def->enum_values.push_back("PLA-AERO");
def->enum_values.push_back("PPS");
def->enum_values.push_back("PPS-CF");
def->enum_values.push_back("PPA-CF");
def->enum_values.push_back("PPA-GF");
def->mode = comSimple;
def->set_default_value(new ConfigOptionStrings { "PLA" });
def = this->add("filament_soluble", coBools);
def->label = L("Soluble material");
def->tooltip = L("Soluble material is commonly used to print support and support interface");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBools { false });
def = this->add("filament_is_support", coBools);
def->label = L("Support material");
def->tooltip = L("Support material is commonly used to print support and support interface");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBools { false });
// BBS
def = this->add("temperature_vitrification", coInts);
def->label = L("Softening temperature");
def->tooltip = L("The material softens at this temperature, so when the bed temperature is equal to or greater than it, it's highly recommended to open the front door and/or remove the upper glass to avoid cloggings.");
def->mode = comSimple;
def->set_default_value(new ConfigOptionInts{ 100 });
def = this->add("filament_cost", coFloats);
def->label = L("Price");
def->tooltip = L("Filament price. For statistics only");
def->sidetext = L("money/kg");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("filament_settings_id", coStrings);
def->set_default_value(new ConfigOptionStrings { "" });
//BBS: open this option to command line
//def->cli = ConfigOptionDef::nocli;
def = this->add("filament_ids", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("filament_vendor", coStrings);
def->label = L("Vendor");
def->tooltip = L("Vendor of filament. For show only");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings{L("(Undefined)")});
def->cli = ConfigOptionDef::nocli;
def = this->add("infill_direction", coFloat);
def->label = L("Infill direction");
def->category = L("Strength");
def->tooltip = L("Angle for sparse infill pattern, which controls the start or main direction of line");
def->sidetext = L("°");
def->min = 0;
def->max = 360;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(45));
def = this->add("sparse_infill_density", coPercent);
def->label = L("Sparse infill density");
def->category = L("Strength");
def->tooltip = L("Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
def->set_default_value(new ConfigOptionPercent(20));
def = this->add("sparse_infill_pattern", coEnum);
def->label = L("Sparse infill pattern");
def->category = L("Strength");
def->tooltip = L("Line pattern for internal sparse infill");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("concentric");
def->enum_values.push_back("zig-zag");
def->enum_values.push_back("grid");
def->enum_values.push_back("line");
def->enum_values.push_back("cubic");
def->enum_values.push_back("triangles");
def->enum_values.push_back("tri-hexagon");
def->enum_values.push_back("gyroid");
def->enum_values.push_back("honeycomb");
def->enum_values.push_back("adaptivecubic");
def->enum_values.push_back("alignedrectilinear");
def->enum_values.push_back("3dhoneycomb");
def->enum_values.push_back("hilbertcurve");
def->enum_values.push_back("archimedeanchords");
def->enum_values.push_back("octagramspiral");
def->enum_values.push_back("supportcubic");
def->enum_values.push_back("lightning");
def->enum_labels.push_back(L("Concentric"));
def->enum_labels.push_back(L("Rectilinear"));
def->enum_labels.push_back(L("Grid"));
def->enum_labels.push_back(L("Line"));
def->enum_labels.push_back(L("Cubic"));
def->enum_labels.push_back(L("Triangles"));
def->enum_labels.push_back(L("Tri-hexagon"));
def->enum_labels.push_back(L("Gyroid"));
def->enum_labels.push_back(L("Honeycomb"));
def->enum_labels.push_back(L("Adaptive Cubic"));
def->enum_labels.push_back(L("Aligned Rectilinear"));
def->enum_labels.push_back(L("3D Honeycomb"));
def->enum_labels.push_back(L("Hilbert Curve"));
def->enum_labels.push_back(L("Archimedean Chords"));
def->enum_labels.push_back(L("Octagram Spiral"));
def->enum_labels.push_back(L("Support Cubic"));
def->enum_labels.push_back(L("Lightning"));
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipCubic));
auto def_infill_anchor_min = def = this->add("infill_anchor", coFloatOrPercent);
def->label = L("Sparse infill anchor length");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. "
"\nSet this parameter to zero to disable anchoring perimeters connected to a single infill line.");
def->sidetext = L("mm or %");
def->ratio_over = "sparse_infill_line_width";
def->max_literal = 1000;
def->gui_type = ConfigOptionDef::GUIType::f_enum_open;
def->enum_values.push_back("0");
def->enum_values.push_back("1");
def->enum_values.push_back("2");
def->enum_values.push_back("5");
def->enum_values.push_back("10");
def->enum_values.push_back("1000");
def->enum_labels.push_back(L("0 (no open anchors)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(400, true));
def = this->add("infill_anchor_max", coFloatOrPercent);
def->label = L("Maximum length of the infill anchor");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. "
"\nIf set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0.");
def->sidetext = def_infill_anchor_min->sidetext;
def->ratio_over = def_infill_anchor_min->ratio_over;
def->gui_type = def_infill_anchor_min->gui_type;
def->enum_values = def_infill_anchor_min->enum_values;
def->max_literal = def_infill_anchor_min->max_literal;
def->enum_labels.push_back(L("0 (Simple connect)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
def = this->add("outer_wall_acceleration", coFloat);
def->label = L("Outer wall");
def->tooltip = L("Acceleration of outer walls");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10000));
def = this->add("inner_wall_acceleration", coFloat);
def->label = L("Inner wall");
def->tooltip = L("Acceleration of inner walls");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10000));
def = this->add("travel_acceleration", coFloat);
def->label = L("Travel");
def->tooltip = L("Acceleration of travel moves");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10000));
def = this->add("top_surface_acceleration", coFloat);
def->label = L("Top surface");
def->tooltip = L("Acceleration of top surface infill. Using a lower value may improve top surface quality");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500));
def = this->add("outer_wall_acceleration", coFloat);
def->label = L("Outer wall");
def->tooltip = L("Acceleration of outer wall. Using a lower value can improve quality");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500));
def = this->add("bridge_acceleration", coFloatOrPercent);
def->label = L("Bridge");
def->tooltip = L("Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "outer_wall_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(50,true));
def = this->add("sparse_infill_acceleration", coFloatOrPercent);
def->label = L("Sparse infill");
def->tooltip = L("Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "default_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("internal_solid_infill_acceleration", coFloatOrPercent);
def->label = L("Internal solid infill");
def->tooltip = L("Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "default_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("initial_layer_acceleration", coFloat);
def->label = L("Initial layer");
def->tooltip = L("Acceleration of initial layer. Using a lower value can improve build plate adhesive");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(300));
def = this->add("accel_to_decel_enable", coBool);
def->label = L("Enable accel_to_decel");
def->tooltip = L("Klipper's max_accel_to_decel will be adjusted automatically");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("accel_to_decel_factor", coPercent);
def->label = L("accel_to_decel");
def->tooltip = L("Klipper's max_accel_to_decel will be adjusted to this %% of acceleration");
def->sidetext = L("%");
def->min = 1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(50));
def = this->add("default_jerk", coFloat);
def->label = L("Default");
def->tooltip = L("Default");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("outer_wall_jerk", coFloat);
def->label = L("Outer wall");
def->tooltip = L("Jerk of outer walls");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("inner_wall_jerk", coFloat);
def->label = L("Inner wall");
def->tooltip = L("Jerk of inner walls");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("top_surface_jerk", coFloat);
def->label = L("Top surface");
def->tooltip = L("Jerk for top surface");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("infill_jerk", coFloat);
def->label = L("Infill");
def->tooltip = L("Jerk for infill");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("initial_layer_jerk", coFloat);
def->label = L("Initial layer");
def->tooltip = L("Jerk for initial layer");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("travel_jerk", coFloat);
def->label = L("Travel");
def->tooltip = L("Jerk for travel");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(12));
def = this->add("initial_layer_line_width", coFloatOrPercent);
def->label = L("Initial layer");
def->category = L("Quality");
def->tooltip = L("Line width of initial layer. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("initial_layer_print_height", coFloat);
def->label = L("Initial layer height");
def->category = L("Quality");
def->tooltip = L("Height of initial layer. Making initial layer height to be thick slightly can improve build plate adhension");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.2));
//def = this->add("adaptive_layer_height", coBool);
//def->label = L("Adaptive layer height");
//def->category = L("Quality");
//def->tooltip = L("Enabling this option means the height of every layer except the first will be automatically calculated "
// "during slicing according to the slope of the model’s surface.\n"
// "Note that this option only takes effect if no prime tower is generated in current plate.");
//def->set_default_value(new ConfigOptionBool(0));
def = this->add("initial_layer_speed", coFloat);
def->label = L("Initial layer");
def->tooltip = L("Speed of initial layer except the solid infill part");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(30));
def = this->add("initial_layer_infill_speed", coFloat);
def->label = L("Initial layer infill");
def->tooltip = L("Speed of solid infill part of initial layer");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60.0));
def = this->add("initial_layer_travel_speed", coFloatOrPercent);
def->label = L("Initial layer travel speed");
def->tooltip = L("Travel speed of initial layer");
def->category = L("Speed");
def->sidetext = L("mm/s or %");
def->ratio_over = "travel_speed";
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("slow_down_layers", coInt);
def->label = L("Number of slow layers");
def->tooltip = L("The first few layers are printed slower than normal. "
"The speed is gradually increased in a linear fashion over the specified number of layers.");
def->category = L("Speed");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("nozzle_temperature_initial_layer", coInts);
def->label = L("Initial layer");
def->full_label = L("Initial layer nozzle temperature");
def->tooltip = L("Nozzle temperature to print initial layer when using this filament");
def->sidetext = L("°C");
def->min = 0;
def->max = max_temp;
def->set_default_value(new ConfigOptionInts { 200 });
def = this->add("full_fan_speed_layer", coInts);
def->label = L("Full fan speed at layer");
def->tooltip = L("Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" "
"to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case "
"the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1.");
def->min = 0;
def->max = 1000;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts { 0 });
def = this->add("support_material_interface_fan_speed", coInts);
def->label = L("Support interface fan speed");
def->tooltip = L("This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed."
"\nSet to -1 to disable this override."
"\nCan only be overriden by disable_fan_first_layers.");
def->sidetext = L("%");
def->min = -1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts{ -1 });
def = this->add("fuzzy_skin", coEnum);
def->label = L("Fuzzy Skin");
def->category = L("Others");
def->tooltip = L("Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls "
"the fuzzy position");
def->enum_keys_map = &ConfigOptionEnum<FuzzySkinType>::get_enum_values();
def->enum_values.push_back("none");
def->enum_values.push_back("external");
def->enum_values.push_back("all");
def->enum_values.push_back("allwalls");
def->enum_labels.push_back(L("None"));
def->enum_labels.push_back(L("Contour"));
def->enum_labels.push_back(L("Contour and hole"));
def->enum_labels.push_back(L("All walls"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<FuzzySkinType>(FuzzySkinType::None));
def = this->add("fuzzy_skin_thickness", coFloat);
def->label = L("Fuzzy skin thickness");
def->category = L("Others");
def->tooltip = L("The width within which to jitter. It's adversed to be below outer wall line width");
def->sidetext = L("mm");
def->min = 0;
def->max = 1;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(0.3));
def = this->add("fuzzy_skin_point_distance", coFloat);
def->label = L("Fuzzy skin point distance");
def->category = L("Others");
def->tooltip = L("The average diatance between the random points introducded on each line segment");
def->sidetext = L("mm");
def->min = 0;
def->max = 5;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(0.8));
def = this->add("fuzzy_skin_first_layer", coBool);
def->label = L("Apply fuzzy skin to first layer");
def->category = L("Others");
def->tooltip = L("Whether to apply fuzzy skin on the first layer");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(0));
def = this->add("filter_out_gap_fill", coFloat);
def->label = L("Filter out tiny gaps");
def->category = L("Layers and Perimeters");
def->tooltip = L("Filter out gaps smaller than the threshold specified");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("gap_infill_speed", coFloat);
def->label = L("Gap infill");
def->category = L("Speed");
def->tooltip = L("Speed of gap infill. Gap usually has irregular line width and should be printed more slowly");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(30));
// BBS
def = this->add("enable_arc_fitting", coBool);
def->label = L("Arc fitting");
def->tooltip = L("Enable this to get a G-code file which has G2 and G3 moves. "
"And the fitting tolerance is same with resolution");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(0));
// BBS
def = this->add("gcode_add_line_number", coBool);
def->label = L("Add line number");
def->tooltip = L("Enable this to add line number(Nx) at the beginning of each G-Code line");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(0));
// BBS
def = this->add("scan_first_layer", coBool);
def->label = L("Scan first layer");
def->tooltip = L("Enable this to enable the camera on printer to check the quality of first layer");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
//BBS
// def = this->add("spaghetti_detector", coBool);
// def->label = L("Enable spaghetti detector");
// def->tooltip = L("Enable the camera on printer to check spaghetti");
// def->mode = comSimple;
// def->set_default_value(new ConfigOptionBool(false));
def = this->add("nozzle_type", coEnum);
def->label = L("Nozzle type");
def->tooltip = L("The metallic material of nozzle. This determines the abrasive resistance of nozzle, and "
"what kind of filament can be printed");
def->enum_keys_map = &ConfigOptionEnum<NozzleType>::get_enum_values();
def->enum_values.push_back("undefine");
def->enum_values.push_back("hardened_steel");
def->enum_values.push_back("stainless_steel");
def->enum_values.push_back("brass");
def->enum_labels.push_back(L("Undefine"));
def->enum_labels.push_back(L("Hardened steel"));
def->enum_labels.push_back(L("Stainless steel"));
def->enum_labels.push_back(L("Brass"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<NozzleType>(ntUndefine));
def = this->add("nozzle_hrc", coInt);
def->label = L("Nozzle HRC");
def->tooltip = L("The nozzle's hardness. Zero means no checking for nozzle's hardness during slicing.");
def->sidetext = L("HRC");
def->min = 0;
def->max = 500;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt{0});
def = this->add("printer_structure", coEnum);
def->label = L("Printer structure");
def->tooltip = L("The physical arrangement and components of a printing device");
def->enum_keys_map = &ConfigOptionEnum<PrinterStructure>::get_enum_values();
def->enum_values.push_back("undefine");
def->enum_values.push_back("corexy");
def->enum_values.push_back("i3");
def->enum_values.push_back("hbot");
def->enum_values.push_back("delta");
def->enum_labels.push_back(L("Undefine"));
def->enum_labels.push_back(L("CoreXY"));
def->enum_labels.push_back(L("I3"));
def->enum_labels.push_back(L("Hbot"));
def->enum_labels.push_back(L("Delta"));
def->mode = comDevelop;
def->set_default_value(new ConfigOptionEnum<PrinterStructure>(psUndefine));
def = this->add("best_object_pos", coPoint);
def->label = L("Best object position");
def->tooltip = L("Best auto arranging position in range [0,1] w.r.t. bed shape.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPoint(Vec2d(0.5, 0.5)));
def = this->add("auxiliary_fan", coBool);
def->label = L("Auxiliary part cooling fan");
def->tooltip = L("Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255).");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("fan_speedup_time", coFloat);
// Label is set in Tab.cpp in the Line object.
//def->label = L("Fan speed-up time");
def->tooltip = L("Start the fan this number of seconds earlier than its target start time (you can use fractional seconds)."
" It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting"
" is unsupported)."
"\nIt won't move fan comands from custom gcodes (they act as a sort of 'barrier')."
"\nIt won't move fan comands into the start gcode if the 'only custom start gcode' is activated."
"\nUse 0 to deactivate.");
def->sidetext = L("s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("fan_speedup_overhangs", coBool);
def->label = L("Only overhangs");
def->tooltip = L("Will only take into account the delay for the cooling of overhangs.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("fan_kickstart", coFloat);
def->label = L("Fan kick-start time");
def->tooltip = L("Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan."
"\nThis is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to "
"get the fan up to speed faster."
"\nSet to 0 to deactivate.");
def->sidetext = L("s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("time_cost", coFloat);
def->label = L("Time cost");
def->tooltip = L("The printer cost per hour");
def->sidetext = L("money/h");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
// Orca: may remove this option later
def =this->add("support_chamber_temp_control",coBool);
def->label=L("Support control chamber temperature");
def->tooltip=L("This option is enabled if machine support controlling chamber temperature\nG-code command: M141 S(0-255)");
def->mode=comDevelop;
def->set_default_value(new ConfigOptionBool(true));
def->readonly=false;
def =this->add("support_air_filtration",coBool);
def->label=L("Support air filtration");
def->tooltip=L("Enable this if printer support air filtration\nG-code command: M106 P3 S(0-255)");
def->mode=comDevelop;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("gcode_flavor", coEnum);
def->label = L("G-code flavor");
def->tooltip = L("What kind of gcode the printer is compatible with");
def->enum_keys_map = &ConfigOptionEnum<GCodeFlavor>::get_enum_values();
def->enum_values.push_back("marlin");
def->enum_values.push_back("klipper");
def->enum_values.push_back("reprapfirmware");
//def->enum_values.push_back("repetier");
//def->enum_values.push_back("teacup");
//def->enum_values.push_back("makerware");
def->enum_values.push_back("marlin2");
//def->enum_values.push_back("sailfish");
//def->enum_values.push_back("mach3");
//def->enum_values.push_back("machinekit");
//def->enum_values.push_back("smoothie");
//def->enum_values.push_back("no-extrusion");
def->enum_labels.push_back("Marlin(legacy)");
def->enum_labels.push_back(L("Klipper"));
def->enum_labels.push_back("RepRapFirmware");
//def->enum_labels.push_back("RepRap/Sprinter");
//def->enum_labels.push_back("Repetier");
//def->enum_labels.push_back("Teacup");
//def->enum_labels.push_back("MakerWare (MakerBot)");
def->enum_labels.push_back("Marlin 2");
//def->enum_labels.push_back("Sailfish (MakerBot)");
//def->enum_labels.push_back("Mach3/LinuxCNC");
//def->enum_labels.push_back("Machinekit");
//def->enum_labels.push_back("Smoothie");
//def->enum_labels.push_back(L("No extrusion"));
def->mode = comAdvanced;
def->readonly = false;
def->set_default_value(new ConfigOptionEnum<GCodeFlavor>(gcfMarlinLegacy));
def = this->add("gcode_label_objects", coBool);
def->label = L("Label objects");
def->tooltip = L("Enable this to add comments into the G-Code labeling print moves with what object they belong to,"
" which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with "
"Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(1));
def = this->add("exclude_object", coBool);
def->label = L("Exclude objects");
def->tooltip = L("Enable this option to add EXCLUDE OBJECT command in g-code");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(1));
def = this->add("gcode_comments", coBool);
def->label = L("Verbose G-code");
def->tooltip = L("Enable this to get a commented G-code file, with each line explained by a descriptive text. "
"If you print from SD card, the additional weight of the file could make your firmware "
"slow down.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(0));
//BBS
def = this->add("infill_combination", coBool);
def->label = L("Infill combination");
def->category = L("Strength");
def->tooltip = L("Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed "
"with original layer height.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("sparse_infill_filament", coInt);
def->label = L("Infill");
def->category = L("Extruders");
def->tooltip = L("Filament to print internal sparse infill.");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("sparse_infill_line_width", coFloatOrPercent);
def->label = L("Sparse infill");
def->category = L("Quality");
def->tooltip = L("Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("infill_wall_overlap", coPercent);
def->label = L("Infill/Wall overlap");
def->category = L("Strength");
def->tooltip = L("Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill");
def->sidetext = L("%");
def->ratio_over = "inner_wall_line_width";
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(15));
def = this->add("sparse_infill_speed", coFloat);
def->label = L("Sparse infill");
def->category = L("Speed");
def->tooltip = L("Speed of internal sparse infill");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100));
def = this->add("inherits", coString);
//def->label = L("Inherits profile");
def->label = "Inherits profile";
//def->tooltip = L("Name of parent profile");
def->tooltip = "Name of parent profile";
def->full_width = true;
def->height = 5;
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
// The following value is to be stored into the project file (AMF, 3MF, Config ...)
// and it contains a sum of "inherits" values over the print and filament profiles.
def = this->add("inherits_group", coStrings);
def->set_default_value(new ConfigOptionStrings());
def->cli = ConfigOptionDef::nocli;
def = this->add("interface_shells", coBool);
def->label = L("Interface shells");
def->label = "Interface shells";
def->tooltip = L("Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual soluble "
"support material");
def->category = L("Quality");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("mmu_segmented_region_max_width", coFloat);
def->label = L("Maximum width of a segmented region");
def->tooltip = L("Maximum width of a segmented region. Zero disables this feature.");
def->sidetext = L("mm");
def->min = 0;
def->category = L("Advanced");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("mmu_segmented_region_interlocking_depth", coFloat);
def->label = L("Interlocking depth of a segmented region");
//def->tooltip = L("Interlocking depth of a segmented region. It will be ignored if "
// "\"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\""
// "is bigger then \"mmu_segmented_region_max_width\". Zero disables this feature.");
def->tooltip = L("Interlocking depth of a segmented region. Zero disables this feature.");
def->sidetext = L("mm"); //(zero to disable)
def->min = 0;
def->category = L("Advanced");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("ironing_type", coEnum);
def->label = L("Ironing Type");
def->category = L("Quality");
def->tooltip = L("Ironing is using small flow to print on same height of surface again to make flat surface more smooth. "
"This setting controls which layer being ironed");
def->enum_keys_map = &ConfigOptionEnum<IroningType>::get_enum_values();
def->enum_values.push_back("no ironing");
def->enum_values.push_back("top");
def->enum_values.push_back("topmost");
def->enum_values.push_back("solid");
def->enum_labels.push_back(L("No ironing"));
def->enum_labels.push_back(L("Top surfaces"));
def->enum_labels.push_back(L("Topmost surface"));
def->enum_labels.push_back(L("All solid layer"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<IroningType>(IroningType::NoIroning));
def = this->add("ironing_pattern", coEnum);
def->label = L("Ironing Pattern");
def->tooltip = L("The pattern that will be used when ironing");
def->category = L("Quality");
def->enum_keys_map = &ConfigOptionEnum<InfillPattern>::get_enum_values();
def->enum_values.push_back("concentric");
def->enum_values.push_back("zig-zag");
def->enum_labels.push_back(L("Concentric"));
def->enum_labels.push_back(L("Rectilinear"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipRectilinear));
def = this->add("ironing_flow", coPercent);
def->label = L("Ironing flow");
def->category = L("Quality");
def->tooltip = L("The amount of material to extrude during ironing. Relative to flow of normal layer height. "
"Too high value results in overextrusion on the surface");
def->sidetext = L("%");
def->ratio_over = "layer_height";
def->min = 0;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(10));
def = this->add("ironing_spacing", coFloat);
def->label = L("Ironing line spacing");
def->category = L("Quality");
def->tooltip = L("The distance between the lines of ironing");
def->sidetext = L("mm");
def->min = 0;
def->max = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.1));
def = this->add("ironing_speed", coFloat);
def->label = L("Ironing speed");
def->category = L("Quality");
def->tooltip = L("Print speed of ironing lines");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(20));
def = this->add("ironing_angle", coFloat);
def->label = L("Ironing angle");
def->category = L("Quality");
def->tooltip = L("The angle ironing is done at. A negative number disables this function and uses the default method.");
def->sidetext = L("°");
def->min = -1;
def->max = 359;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(-1));
def = this->add("layer_change_gcode", coString);
def->label = L("Layer change G-code");
def->tooltip = L("This gcode part is inserted at every layer change after lift z");
def->multiline = true;
def->full_width = true;
def->height = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("time_lapse_gcode",coString);
def->label = L("Time lapse G-code");
def->multiline = true;
def->full_width = true;
def->height =5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("silent_mode", coBool);
def->label = L("Supports silent mode");
def->tooltip = L("Whether the machine supports silent mode in which machine use lower acceleration to print");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("emit_machine_limits_to_gcode", coBool);
def->label = L("Emit limits to G-code");
def->category = L("Machine limits");
def->tooltip = L("If enabled, the machine limits will be emitted to G-code file.\nThis option will be ignored if the g-code flavor is "
"set to Klipper.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("machine_pause_gcode", coString);
def->label = L("Pause G-code");
def->tooltip = L("This G-code will be used as a code for the pause print. User can insert pause G-code in gcode viewer");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("template_custom_gcode", coString);
def->label = L("Custom G-code");
def->tooltip = L("This G-code will be used as a custom code");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
{
struct AxisDefault {
std::string name;
std::vector<double> max_feedrate;
std::vector<double> max_acceleration;
std::vector<double> max_jerk;
};
std::vector<AxisDefault> axes {
// name, max_feedrate, max_acceleration, max_jerk
{ "x", { 500., 200. }, { 1000., 1000. }, { 10. , 10. } },
{ "y", { 500., 200. }, { 1000., 1000. }, { 10. , 10. } },
{ "z", { 12., 12. }, { 500., 200. }, { 0.2, 0.4 } },
{ "e", { 120., 120. }, { 5000., 5000. }, { 2.5, 2.5 } }
};
for (const AxisDefault &axis : axes) {
std::string axis_upper = boost::to_upper_copy<std::string>(axis.name);
// Add the machine feedrate limits for XYZE axes. (M203)
def = this->add("machine_max_speed_" + axis.name, coFloats);
def->full_label = (boost::format("Maximum speed %1%") % axis_upper).str();
(void)L("Maximum speed X");
(void)L("Maximum speed Y");
(void)L("Maximum speed Z");
(void)L("Maximum speed E");
def->category = L("Machine limits");
def->readonly = false;
def->tooltip = (boost::format("Maximum speed of %1% axis") % axis_upper).str();
(void)L("Maximum X speed");
(void)L("Maximum Y speed");
(void)L("Maximum Z speed");
(void)L("Maximum E speed");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats(axis.max_feedrate));
// Add the machine acceleration limits for XYZE axes (M201)
def = this->add("machine_max_acceleration_" + axis.name, coFloats);
def->full_label = (boost::format("Maximum acceleration %1%") % axis_upper).str();
(void)L("Maximum acceleration X");
(void)L("Maximum acceleration Y");
(void)L("Maximum acceleration Z");
(void)L("Maximum acceleration E");
def->category = L("Machine limits");
def->readonly = false;
def->tooltip = (boost::format("Maximum acceleration of the %1% axis") % axis_upper).str();
(void)L("Maximum acceleration of the X axis");
(void)L("Maximum acceleration of the Y axis");
(void)L("Maximum acceleration of the Z axis");
(void)L("Maximum acceleration of the E axis");
def->sidetext = L("mm/s²");
def->min = 0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats(axis.max_acceleration));
// Add the machine jerk limits for XYZE axes (M205)
def = this->add("machine_max_jerk_" + axis.name, coFloats);
def->full_label = (boost::format("Maximum jerk %1%") % axis_upper).str();
(void)L("Maximum jerk X");
(void)L("Maximum jerk Y");
(void)L("Maximum jerk Z");
(void)L("Maximum jerk E");
def->category = L("Machine limits");
def->readonly = false;
def->tooltip = (boost::format("Maximum jerk of the %1% axis") % axis_upper).str();
(void)L("Maximum jerk of the X axis");
(void)L("Maximum jerk of the Y axis");
(void)L("Maximum jerk of the Z axis");
(void)L("Maximum jerk of the E axis");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats(axis.max_jerk));
}
}
// M205 S... [mm/sec]
def = this->add("machine_min_extruding_rate", coFloats);
def->full_label = L("Minimum speed for extruding");
def->category = L("Machine limits");
def->tooltip = L("Minimum speed for extruding (M205 S)");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionFloats{ 0., 0. });
// M205 T... [mm/sec]
def = this->add("machine_min_travel_rate", coFloats);
def->full_label = L("Minimum travel speed");
def->category = L("Machine limits");
def->tooltip = L("Minimum travel speed (M205 T)");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionFloats{ 0., 0. });
// M204 P... [mm/sec^2]
def = this->add("machine_max_acceleration_extruding", coFloats);
def->full_label = L("Maximum acceleration for extruding");
def->category = L("Machine limits");
def->tooltip = L("Maximum acceleration for extruding (M204 P)");
// "Marlin (legacy) firmware flavor will use this also "
// "as travel acceleration (M204 T).");
def->sidetext = L("mm/s²");
def->min = 0;
def->readonly = false;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats{ 1500., 1250. });
// M204 R... [mm/sec^2]
def = this->add("machine_max_acceleration_retracting", coFloats);
def->full_label = L("Maximum acceleration for retracting");
def->category = L("Machine limits");
def->tooltip = L("Maximum acceleration for retracting (M204 R)");
def->sidetext = L("mm/s²");
def->min = 0;
def->readonly = false;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats{ 1500., 1250. });
// M204 T... [mm/sec^2]
def = this->add("machine_max_acceleration_travel", coFloats);
def->full_label = L("Maximum acceleration for travel");
def->category = L("Machine limits");
def->tooltip = L("Maximum acceleration for travel (M204 T), it only applies to Marlin 2");
def->sidetext = L("mm/s²");
def->min = 0;
def->readonly = false;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats{ 0., 0. });
def = this->add("fan_max_speed", coFloats);
def->label = L("Fan speed");
def->tooltip = L("Part cooling fan speed may be increased when auto cooling is enabled. "
"This is the maximum speed limitation of part cooling fan");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats { 100 });
def = this->add("max_layer_height", coFloats);
def->label = L("Max");
def->tooltip = L("The largest printable layer height for extruder. Used tp limits "
"the maximum layer hight when enable adaptive layer height");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("max_volumetric_extrusion_rate_slope", coFloat);
def->label = L("Extrusion rate smoothing");
def->tooltip = L("This parameter smooths out sudden extrusion rate changes that happen when "
"the printer transitions from printing a high flow (high speed/larger width) "
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. "
"Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n"
"A value of 0 disables the feature. \n\n"
"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. "
"However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, "
"when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350mm3/s2 is "
"recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n\n"
"For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a "
"good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n\n"
"Note: this parameter disables arc fitting.");
def->sidetext = L("mm³/s²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("max_volumetric_extrusion_rate_slope_segment_length", coInt);
def->label = L("Smoothing segment length");
def->tooltip = L("A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger gcode file "
"and more instructions for the printer to process. \n\n"
"Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n\n"
"Allowed values: 1-5");
def->min = 1;
def->max = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(3));
def = this->add("fan_min_speed", coFloats);
def->label = L("Fan speed");
def->tooltip = L("Minimum speed for part cooling fan");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats { 20 });
def = this->add("additional_cooling_fan_speed", coInts);
def->label = L("Fan speed");
def->tooltip = L("Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers "
"which is defined by no cooling layers.\nPlease enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInts { 0 });
def = this->add("min_layer_height", coFloats);
def->label = L("Min");
def->tooltip = L("The lowest printable layer height for extruder. Used tp limits "
"the minimum layer hight when enable adaptive layer height");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0.07 });
def = this->add("slow_down_min_speed", coFloats);
def->label = L("Min print speed");
def->tooltip = L("The minimum printing speed for the filament when slow down for better layer cooling is enabled, when printing overhangs and when feature speeds are not specified explicitly.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 10. });
def = this->add("nozzle_diameter", coFloats);
def->label = L("Nozzle diameter");
def->tooltip = L("Diameter of nozzle");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->max = 100;
def->set_default_value(new ConfigOptionFloats { 0.4 });
def = this->add("notes", coString);
def->label = L("Configuration notes");
def->tooltip = L("You can put here your personal notes. This text will be added to the G-code "
"header comments.");
def->multiline = true;
def->full_width = true;
def->height = 13;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("host_type", coEnum);
def->label = L("Host Type");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host.");
def->enum_keys_map = &ConfigOptionEnum<PrintHostType>::get_enum_values();
def->enum_values.push_back("prusalink");
def->enum_values.push_back("prusaconnect");
def->enum_values.push_back("octoprint");
def->enum_values.push_back("duet");
def->enum_values.push_back("flashair");
def->enum_values.push_back("astrobox");
def->enum_values.push_back("repetier");
def->enum_values.push_back("mks");
def->enum_labels.push_back("PrusaLink");
def->enum_labels.push_back("PrusaConnect");
def->enum_labels.push_back("Octo/Klipper");
def->enum_labels.push_back("Duet");
def->enum_labels.push_back("FlashAir");
def->enum_labels.push_back("AstroBox");
def->enum_labels.push_back("Repetier");
def->enum_labels.push_back("MKS");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
def->set_default_value(new ConfigOptionEnum<PrintHostType>(htOctoPrint));
def = this->add("nozzle_volume", coFloat);
def->label = L("Nozzle volume");
def->tooltip = L("Volume of nozzle between the cutter and the end of nozzle");
def->sidetext = L("mm³");
def->mode = comAdvanced;
def->readonly = false;
def->set_default_value(new ConfigOptionFloat { 0.0 });
def = this->add("cooling_tube_retraction", coFloat);
def->label = L("Cooling tube position");
def->tooltip = L("Distance of the center-point of the cooling tube from the extruder tip.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(91.5));
def = this->add("cooling_tube_length", coFloat);
def->label = L("Cooling tube length");
def->tooltip = L("Length of the cooling tube to limit space for cooling moves inside it.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5.));
def = this->add("high_current_on_filament_swap", coBool);
def->label = L("High extruder current on filament swap");
def->tooltip = L("It may be beneficial to increase the extruder motor current during the filament exchange"
" sequence to allow for rapid ramming feed rates and to overcome resistance when loading"
" a filament with an ugly shaped tip.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(0));
def = this->add("parking_pos_retraction", coFloat);
def->label = L("Filament parking position");
def->tooltip = L("Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(92.));
def = this->add("extra_loading_move", coFloat);
def->label = L("Extra loading distance");
def->tooltip = L("When set to zero, the distance the filament is moved from parking position during load "
"is exactly the same as it was moved back during unload. When positive, it is loaded further, "
" if negative, the loading move is shorter than unloading.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(-2.));
def = this->add("start_end_points", coPoints);
def->label = L("Start end points");
def->tooltip = L("The start and end points which is from cutter area to garbage can.");
def->mode = comDevelop;
def->readonly = true;
// start and end point is from the change_filament_gcode
def->set_default_value(new ConfigOptionPoints{Vec2d(30, -3), Vec2d(54, 245)});
def = this->add("reduce_infill_retraction", coBool);
def->label = L("Reduce infill retraction");
def->tooltip = L("Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. "
"This can reduce times of retraction for complex model and save printing time, but make slicing and "
"G-code generating slower");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("ooze_prevention", coBool);
def->label = L("Enable");
//def->tooltip = L("This option will drop the temperature of the inactive extruders to prevent oozing. "
// "It will enable a tall skirt automatically and move extruders outside such "
// "skirt when changing temperatures.");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("filename_format", coString);
def->label = L("Filename format");
def->tooltip = L("User can self-define the project file name when export");
def->full_width = true;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString("{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode"));
def = this->add("make_overhang_printable", coBool);
def->label = L("Make overhangs printable");
def->category = L("Quality");
def->tooltip = L("Modify the geometry to print overhangs without support material.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("make_overhang_printable_angle", coFloat);
def->label = L("Make overhangs printable - Maximum angle");
def->category = L("Quality");
def->tooltip = L("Maximum angle of overhangs to allow after making more steep overhangs printable."
"90° will not change the model at all and allow any overhang, while 0 will "
"replace all overhangs with conical material.");
def->sidetext = L("°");
def->mode = comAdvanced;
def->min = 0.;
def->max = 90.;
def->set_default_value(new ConfigOptionFloat(55.));
def = this->add("make_overhang_printable_hole_size", coFloat);
def->label = L("Make overhangs printable - Hole area");
def->category = L("Quality");
def->tooltip = L("Maximum area of a hole in the base of the model before it's filled by conical material."
"A value of 0 will fill all the holes in the model base.");
def->sidetext = L("mm²");
def->mode = comAdvanced;
def->min = 0.;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("detect_overhang_wall", coBool);
def->label = L("Detect overhang wall");
def->category = L("Quality");
def->tooltip = L("Detect the overhang percentage relative to line width and use different speed to print. "
"For 100%% overhang, bridge speed is used.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("wall_filament", coInt);
//def->label = L("Walls");
//def->category = L("Extruders");
//def->tooltip = L("Filament to print walls");
def->label = "Walls";
def->category = "Extruders";
def->tooltip = "Filament to print walls";
def->min = 1;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("inner_wall_line_width", coFloatOrPercent);
def->label = L("Inner wall");
def->category = L("Quality");
def->tooltip = L("Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("inner_wall_speed", coFloat);
def->label = L("Inner wall");
def->category = L("Speed");
def->tooltip = L("Speed of inner wall");
def->sidetext = L("mm/s");
def->aliases = { "perimeter_feed_rate" };
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60));
def = this->add("wall_loops", coInt);
def->label = L("Wall loops");
def->category = L("Strength");
def->tooltip = L("Number of walls of every layer");
def->min = 0;
def->max = 1000;
def->set_default_value(new ConfigOptionInt(2));
def = this->add("alternate_extra_wall", coBool);
def->label = L("Alternate extra wall");
def->category = L("Strength");
def->tooltip = L("This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints. \n\nWhen this option is enabled, the ensure vertical shell thickness option needs to be disabled. \n\nUsing lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("post_process", coStrings);
def->label = L("Post-processing Scripts");
def->tooltip = L("If you want to process the output G-code through custom scripts, "
"just list their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first argument, "
"and they can access the Slic3r config settings by reading environment variables.");
def->gui_flags = "serialized";
def->multiline = true;
def->full_width = true;
def->height = 6;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings());
def = this->add("printer_model", coString);
//def->label = L("Printer type");
//def->tooltip = L("Type of the printer");
def->label = "Printer type";
def->tooltip = "Type of the printer";
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("printer_notes", coString);
def->label = L("Printer notes");
def->tooltip = L("You can put your notes regarding the printer here.");
def->multiline = true;
def->full_width = true;
def->height = 13;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("printer_variant", coString);
//def->label = L("Printer variant");
def->label = "Printer variant";
//def->tooltip = L("Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter.");
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("print_settings_id", coString);
def->set_default_value(new ConfigOptionString(""));
//BBS: open this option to command line
//def->cli = ConfigOptionDef::nocli;
def = this->add("printer_settings_id", coString);
def->set_default_value(new ConfigOptionString(""));
//BBS: open this option to command line
//def->cli = ConfigOptionDef::nocli;
def = this->add("raft_contact_distance", coFloat);
def->label = L("Raft contact Z distance");
def->category = L("Support");
def->tooltip = L("Z gap between object and raft. Ignored for soluble interface");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.1));
def = this->add("raft_expansion", coFloat);
def->label = L("Raft expansion");
def->category = L("Support");
def->tooltip = L("Expand all raft layers in XY plane");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.5));
def = this->add("raft_first_layer_density", coPercent);
def->label = L("Initial layer density");
def->category = L("Support");
def->tooltip = L("Density of the first raft or support layer");
def->sidetext = L("%");
def->min = 10;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(90));
def = this->add("raft_first_layer_expansion", coFloat);
def->label = L("Initial layer expansion");
def->category = L("Support");
def->tooltip = L("Expand the first raft or support layer to improve bed plate adhesion");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
//BBS: change from 3.0 to 2.0
def->set_default_value(new ConfigOptionFloat(2.0));
def = this->add("raft_layers", coInt);
def->label = L("Raft layers");
def->category = L("Support");
def->tooltip = L("Object will be raised by this number of support layers. "
"Use this function to avoid wrapping when print ABS");
def->sidetext = L("layers");
def->min = 0;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("resolution", coFloat);
def->label = L("Resolution");
def->tooltip = L("G-code path is genereated after simplifing the contour of model to avoid too much points and gcode lines "
"in gcode file. Smaller value means higher resolution and more time to slice");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.01));
def = this->add("retraction_minimum_travel", coFloats);
def->label = L("Travel distance threshold");
def->tooltip = L("Only trigger retraction when the travel distance is longer than this threshold");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 2. });
def = this->add("retract_before_wipe", coPercents);
def->label = L("Retract amount before wipe");
def->tooltip = L("The length of fast retraction before wipe, relative to retraction length");
def->sidetext = L("%");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercents { 100 });
def = this->add("retract_when_changing_layer", coBools);
def->label = L("Retract when change layer");
def->tooltip = L("Force a retraction when changes layer");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBools { false });
def = this->add("retraction_length", coFloats);
def->label = L("Length");
def->full_label = L("Retraction Length");
def->tooltip = L("Some amount of material in extruder is pulled back to avoid ooze during long travel. "
"Set zero to disable retraction");
def->sidetext = L("mm");
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats { 0.8 });
def = this->add("retract_length_toolchange", coFloats);
def->label = L("Length");
//def->full_label = L("Retraction Length (Toolchange)");
def->full_label = "Retraction Length (Toolchange)";
//def->tooltip = L("When retraction is triggered before changing tool, filament is pulled back "
// "by the specified amount (the length is measured on raw filament, before it enters "
// "the extruder).");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 10. });
def = this->add("z_hop", coFloats);
def->label = L("Z hop when retract");
def->tooltip = L("Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. "
"It prevents nozzle from hitting the print when travel move. "
"Using spiral line to lift z can prevent stringing");
def->sidetext = L("mm");
def->mode = comSimple;
def->min = 0;
def->max = 5;
def->set_default_value(new ConfigOptionFloats { 0.4 });
def = this->add("retract_lift_above", coFloats);
def->label = L("Z hop lower boundary");
def->tooltip = L("Z hop will only come into effect when Z is above this value and is below the parameter: \"Z hop upper boundary\"");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionFloats{0.});
def = this->add("retract_lift_below", coFloats);
def->label = L("Z hop upper boundary");
def->tooltip = L("If this value is positive, Z hop will only come into effect when Z is above the parameter: \"Z hop lower boundary\" and is below this value");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionFloats{0.});
def = this->add("z_hop_types", coEnums);
def->label = L("Z hop type");
def->tooltip = L("Z hop type");
def->enum_keys_map = &ConfigOptionEnum<ZHopType>::get_enum_values();
def->enum_values.push_back("Auto Lift");
def->enum_values.push_back("Normal Lift");
def->enum_values.push_back("Slope Lift");
def->enum_values.push_back("Spiral Lift");
def->enum_labels.push_back(L("Auto"));
def->enum_labels.push_back(L("Normal"));
def->enum_labels.push_back(L("Slope"));
def->enum_labels.push_back(L("Spiral"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnumsGeneric{ ZHopType::zhtNormal });
def = this->add("retract_lift_above", coFloats);
def->label = L("Only lift Z above");
def->tooltip = L("If you set this to a positive value, Z lift will only take place above the specified absolute Z.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats{0.});
def = this->add("retract_lift_below", coFloats);
def->label = L("Only lift Z below");
def->tooltip = L("If you set this to a positive value, Z lift will only take place below the specified absolute Z.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats{0.});
def = this->add("retract_lift_enforce", coEnums);
def->label = L("On surfaces");
def->tooltip = L("Enforce Z Hop behavior. This setting is impacted by the above settings (Only lift Z above/below).");
def->enum_keys_map = &ConfigOptionEnum<RetractLiftEnforceType>::get_enum_values();
def->enum_values.push_back("All Surfaces");
def->enum_values.push_back("Top Only");
def->enum_values.push_back("Bottom Only");
def->enum_values.push_back("Top and Bottom");
def->enum_labels.push_back(L("All Surfaces"));
def->enum_labels.push_back(L("Top Only"));
def->enum_labels.push_back(L("Bottom Only"));
def->enum_labels.push_back(L("Top and Bottom"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnumsGeneric{RetractLiftEnforceType ::rletAllSurfaces});
def = this->add("retract_restart_extra", coFloats);
def->label = L("Extra length on restart");
def->tooltip = L("When the retraction is compensated after the travel move, the extruder will push "
"this additional amount of filament. This setting is rarely needed.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("retract_restart_extra_toolchange", coFloats);
def->label = L("Extra length on restart");
def->tooltip = L("When the retraction is compensated after changing tool, the extruder will push "
"this additional amount of filament.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("retraction_speed", coFloats);
def->label = L("Retraction Speed");
def->full_label = L("Retraction Speed");
def->tooltip = L("Speed of retractions");
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 30. });
def = this->add("deretraction_speed", coFloats);
def->label = L("Deretraction Speed");
def->full_label = L("Deretraction Speed");
def->tooltip = L("Speed for reloading filament into extruder. Zero means same speed with retraction");
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 0. });
def = this->add("use_firmware_retraction", coBool);
def->label = L("Use firmware retraction");
def->tooltip = L("This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("bbl_calib_mark_logo", coBool);
def->label = L("Show auto-calibration marks");
def->tooltip = "";
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("disable_m73", coBool);
def->label = L("Disable set remaining print time");
def->tooltip = "Disable generating of the M73: Set remaining print time in the final gcode";
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("seam_position", coEnum);
def->label = L("Seam position");
def->category = L("Quality");
def->tooltip = L("The start position to print each part of outer wall");
def->enum_keys_map = &ConfigOptionEnum<SeamPosition>::get_enum_values();
def->enum_values.push_back("nearest");
def->enum_values.push_back("aligned");
def->enum_values.push_back("back");
def->enum_values.push_back("random");
def->enum_labels.push_back(L("Nearest"));
def->enum_labels.push_back(L("Aligned"));
def->enum_labels.push_back(L("Back"));
def->enum_labels.push_back(L("Random"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<SeamPosition>(spAligned));
def = this->add("staggered_inner_seams", coBool);
def->label = L("Staggered inner seams");
def->tooltip = L("This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("seam_gap", coFloatOrPercent);
def->label = L("Seam gap");
def->tooltip = L("In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%.");
def->sidetext = L("mm or %");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(10,true));
def = this->add("role_based_wipe_speed", coBool);
def->label = L("Role base wipe speed");
def->tooltip = L("The wipe speed is determined by the speed of the current extrusion role."
"e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("wipe_on_loops", coBool);
def->label = L("Wipe on loops");
def->tooltip = L("To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("wipe_before_external_loop", coBool);
def->label = L("Wipe before external loop");
def->tooltip = L("To minimise visibility of potential overextrusion at the start of an external perimeter when printing with "
"Outer/Inner or Inner/Outer/Inner wall print order, the deretraction is performed slightly on the inside from the "
"start of the external perimeter. That way any potential over extrusion is hidden from the outside surface. \n\nThis "
"is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely "
"an external perimeter is printed immediately after a deretraction move.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("wipe_speed", coFloatOrPercent);
def->label = L("Wipe speed");
def->tooltip = L("The wipe speed is determined by the speed setting specified in this configuration."
"If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above."
"The default value for this parameter is 80%");
def->sidetext = L("mm/s or %");
def->ratio_over = "travel_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(80,true));
def = this->add("skirt_distance", coFloat);
def->label = L("Skirt distance");
def->tooltip = L("Distance from skirt to brim or object");
def->sidetext = L("mm");
def->min = 0;
def->max = 60;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(2));
def = this->add("skirt_height", coInt);
def->label = L("Skirt height");
//def->label = "Skirt height";
def->tooltip = L("How many layers of skirt. Usually only one layer");
def->sidetext = L("layers");
def->mode = comSimple;
def->max = 10000;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("draft_shield", coEnum);
//def->label = L("Draft shield");
def->label = "Draft shield";
//def->tooltip = L("With draft shield active, the skirt will be printed skirt_distance from the object, possibly intersecting brim.\n"
// "Enabled = skirt is as tall as the highest printed object.\n"
// "Limited = skirt is as tall as specified by skirt_height.\n"
// "This is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft.");
def->enum_keys_map = &ConfigOptionEnum<DraftShield>::get_enum_values();
def->enum_values.push_back("disabled");
def->enum_values.push_back("limited");
def->enum_values.push_back("enabled");
def->enum_labels.push_back("Disabled");
def->enum_labels.push_back("Limited");
def->enum_labels.push_back("Enabled");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionEnum<DraftShield>(dsDisabled));
def = this->add("skirt_loops", coInt);
def->label = L("Skirt loops");
def->full_label = L("Skirt loops");
def->tooltip = L("Number of loops for the skirt. Zero means disabling skirt");
def->min = 0;
def->max = 10;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("skirt_speed", coFloat);
def->label = L("Skirt speed");
def->full_label = L("Skirt speed");
def->tooltip = L("Speed of skirt, in mm/s. Zero means use default layer extrusion speed.");
def->min = 0;
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(50.0));
def = this->add("slow_down_layer_time", coFloats);
def->label = L("Layer time");
def->tooltip = L("The printing speed in exported gcode will be slowed down, when the estimated layer time is shorter than this value, to "
"get better cooling for these layers");
def->sidetext = L("s");
def->min = 0;
def->max = 1000;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloats { 5.0f });
def = this->add("minimum_sparse_infill_area", coFloat);
def->label = L("Minimum sparse infill threshold");
def->category = L("Strength");
def->tooltip = L("Sparse infill area which is smaller than threshold value is replaced by internal solid infill");
def->sidetext = L("mm²");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(15));
def = this->add("solid_infill_filament", coInt);
//def->label = L("Solid infill");
//def->category = L("Extruders");
//def->tooltip = L("Filament to print solid infill");
def->label = "Solid infill";
def->category = "Extruders";
def->tooltip = "Filament to print solid infill";
def->min = 1;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("internal_solid_infill_line_width", coFloatOrPercent);
def->label = L("Internal solid infill");
def->category = L("Quality");
def->tooltip = L("Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("internal_solid_infill_speed", coFloat);
def->label = L("Internal solid infill");
def->category = L("Speed");
def->tooltip = L("Speed of internal solid infill, not the top and bottom surface");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100));
def = this->add("spiral_mode", coBool);
def->label = L("Spiral vase");
def->tooltip = L("Spiralize smooths out the z moves of the outer contour. "
"And turns a solid model into a single walled print with solid bottom layers. "
"The final generated model has no seam");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("spiral_mode_smooth", coBool);
def->label = L("Smooth Spiral");
def->tooltip = L("Smooth Spiral smoothes out X and Y moves as well"
"resulting in no visible seam at all, even in the XY directions on walls that are not vertical");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("spiral_mode_max_xy_smoothing", coFloatOrPercent);
def->label = L("Max XY Smoothing");
def->tooltip = L("Maximum distance to move points in XY to try to achieve a smooth spiral"
"If expressed as a %, it will be computed over nozzle diameter");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
def = this->add("timelapse_type", coEnum);
def->label = L("Timelapse");
def->tooltip = L("If smooth or traditional mode is selected, a timelapse video will be generated for each print. "
"After each layer is printed, a snapshot is taken with the chamber camera. "
"All of these snapshots are composed into a timelapse video when printing completes. "
"If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed "
"and then take a snapshot. "
"Since the melt filament may leak from the nozzle during the process of taking a snapshot, "
"prime tower is required for smooth mode to wipe nozzle.");
def->enum_keys_map = &ConfigOptionEnum<TimelapseType>::get_enum_values();
def->enum_values.emplace_back("0");
def->enum_values.emplace_back("1");
def->enum_labels.emplace_back(L("Traditional"));
def->enum_labels.emplace_back(L("Smooth"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<TimelapseType>(tlTraditional));
def = this->add("standby_temperature_delta", coInt);
def->label = L("Temperature variation");
//def->tooltip = L("Temperature difference to be applied when an extruder is not active. "
// "Enables a full-height \"sacrificial\" skirt on which the nozzles are periodically wiped.");
def->sidetext = "∆°C";
def->min = -max_temp;
def->max = max_temp;
//BBS
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt(-5));
def = this->add("machine_start_gcode", coString);
def->label = L("Start G-code");
def->tooltip = L("Start G-code when start the whole printing");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString("G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n"));
def = this->add("filament_start_gcode", coStrings);
def->label = L("Start G-code");
def->tooltip = L("Start G-code when start the printing of this filament");
def->multiline = true;
def->full_width = true;
def->height = 12;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionStrings { " " });
def = this->add("single_extruder_multi_material", coBool);
def->label = L("Single Extruder Multi Material");
def->tooltip = L("Use single nozzle to print multi filament");
def->mode = comAdvanced;
def->readonly = true;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("manual_filament_change", coBool);
def->label = L("Manual Filament Change");
def->tooltip = L("Enable this option to omit the custom Change filament G-code only at the beginning of the print. "
"The tool change command (e.g., T0) will be skipped throughout the entire print. "
"This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("purge_in_prime_tower", coBool);
def->label = L("Purge in prime tower");
def->tooltip = L("Purge remaining filament into prime tower");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("enable_filament_ramming", coBool);
def->label = L("Enable filament ramming");
def->tooltip = L("Enable filament ramming");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("wipe_tower_no_sparse_layers", coBool);
def->label = L("No sparse layers (EXPERIMENTAL)");
def->tooltip = L("If enabled, the wipe tower will not be printed on layers with no toolchanges. "
"On layers with a toolchange, extruder will travel downward to print the wipe tower. "
"User is responsible for ensuring there is no collision with the print.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("single_extruder_multi_material_priming", coBool);
def->label = L("Prime all printing extruders");
def->tooltip = L("If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("slice_closing_radius", coFloat);
def->label = L("Slice gap closing radius");
def->category = L("Quality");
def->tooltip = L("Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. "
"The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.049));
def = this->add("slicing_mode", coEnum);
def->label = L("Slicing Mode");
def->category = L("Other");
def->tooltip = L("Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model.");
def->enum_keys_map = &ConfigOptionEnum<SlicingMode>::get_enum_values();
def->enum_values.push_back("regular");
def->enum_values.push_back("even_odd");
def->enum_values.push_back("close_holes");
def->enum_labels.push_back(L("Regular"));
def->enum_labels.push_back(L("Even-odd"));
def->enum_labels.push_back(L("Close holes"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SlicingMode>(SlicingMode::Regular));
def = this->add("z_offset", coFloat);
def->label = L("Z offset");
def->tooltip = L("This value will be added (or subtracted) from all the Z coordinates "
"in the output G-code. It is used to compensate for bad Z endstop position: "
"for example, if your endstop zero actually leaves the nozzle 0.3mm far "
"from the print bed, set this to -0.3 (or fix your endstop).");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("enable_support", coBool);
//BBS: remove material behind support
def->label = L("Enable support");
def->category = L("Support");
def->tooltip = L("Enable support generation.");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("support_type", coEnum);
def->label = L("Type");
def->category = L("Support");
def->tooltip = L("normal(auto) and tree(auto) is used to generate support automatically. "
"If normal(manual) or tree(manual) is selected, only support enforcers are generated");
def->enum_keys_map = &ConfigOptionEnum<SupportType>::get_enum_values();
def->enum_values.push_back("normal(auto)");
def->enum_values.push_back("tree(auto)");
def->enum_values.push_back("normal(manual)");
def->enum_values.push_back("tree(manual)");
def->enum_labels.push_back(L("normal(auto)"));
def->enum_labels.push_back(L("tree(auto)"));
def->enum_labels.push_back(L("normal(manual)"));
def->enum_labels.push_back(L("tree(manual)"));
def->mode = comSimple;
def->set_default_value(new ConfigOptionEnum<SupportType>(stNormalAuto));
def = this->add("support_object_xy_distance", coFloat);
def->label = L("Support/object xy distance");
def->category = L("Support");
def->tooltip = L("XY separation between an object and its support");
def->sidetext = L("mm");
def->min = 0;
def->max = 10;
def->mode = comAdvanced;
//Support with too small spacing may touch the object and difficult to remove.
def->set_default_value(new ConfigOptionFloat(0.35));
def = this->add("support_angle", coFloat);
def->label = L("Pattern angle");
def->category = L("Support");
def->tooltip = L("Use this setting to rotate the support pattern on the horizontal plane.");
def->sidetext = L("°");
def->min = 0;
def->max = 359;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("support_on_build_plate_only", coBool);
def->label = L("On build plate only");
def->category = L("Support");
def->tooltip = L("Don't create support on model surface, only on build plate");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
// BBS
def = this->add("support_critical_regions_only", coBool);
def->label = L("Support critical regions only");
def->category = L("Support");
def->tooltip = L("Only create support for critical regions including sharp tail, cantilever, etc.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("support_remove_small_overhang", coBool);
def->label = L("Remove small overhangs");
def->category = L("Support");
def->tooltip = L("Remove small overhangs that possibly need no supports.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
// BBS: change type to common float.
// It may be rounded to mulitple layer height when independent_support_layer_height is false.
def = this->add("support_top_z_distance", coFloat);
//def->gui_type = ConfigOptionDef::GUIType::f_enum_open;
def->label = L("Top Z distance");
def->min = 0;
def->category = L("Support");
def->tooltip = L("The z gap between the top support interface and object");
def->sidetext = L("mm");
// def->min = 0;
#if 0
//def->enum_values.push_back("0");
//def->enum_values.push_back("0.1");
//def->enum_values.push_back("0.2");
//def->enum_labels.push_back(L("0 (soluble)"));
//def->enum_labels.push_back(L("0.1 (semi-detachable)"));
//def->enum_labels.push_back(L("0.2 (detachable)"));
#endif
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.2));
def = this->add("support_bottom_z_distance", coFloat);
def->label = L("Bottom Z distance");
def->category = L("Support");
def->tooltip = L("The z gap between the bottom support interface and object");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.2));
def = this->add("enforce_support_layers", coInt);
//def->label = L("Enforce support for the first");
def->category = L("Support");
//def->tooltip = L("Generate support material for the specified number of layers counting from bottom, "
// "regardless of whether normal support material is enabled or not and regardless "
// "of any angle threshold. This is useful for getting more adhesion of objects "
// "having a very thin or poor footprint on the build plate.");
def->sidetext = L("layers");
//def->full_label = L("Enforce support for the first n layers");
def->min = 0;
def->max = 5000;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("support_filament", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Support/raft base");
def->category = L("Support");
def->tooltip = L("Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used");
def->min = 0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("support_interface_not_for_body",coBool);
def->label = L("Avoid interface filament for base");
def->category = L("Support");
def->tooltip = L("Avoid using support interface filament to print support base if possible.");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("support_line_width", coFloatOrPercent);
def->label = L("Support");
def->category = L("Quality");
def->tooltip = L("Line width of support. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("support_interface_loop_pattern", coBool);
def->label = L("Interface use loop pattern");
def->category = L("Support");
def->tooltip = L("Cover the top contact layer of the supports with loops. Disabled by default.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("support_interface_filament", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Support/raft interface");
def->category = L("Support");
def->tooltip = L("Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used");
def->min = 0;
// BBS
def->mode = comSimple;
def->set_default_value(new ConfigOptionInt(0));
auto support_interface_top_layers = def = this->add("support_interface_top_layers", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Top interface layers");
def->category = L("Support");
def->tooltip = L("Number of top interface layers");
def->sidetext = L("layers");
def->min = 0;
def->enum_values.push_back("0");
def->enum_values.push_back("1");
def->enum_values.push_back("2");
def->enum_values.push_back("3");
def->enum_labels.push_back("0");
def->enum_labels.push_back("1");
def->enum_labels.push_back("2");
def->enum_labels.push_back("3");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(3));
def = this->add("support_interface_bottom_layers", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Bottom interface layers");
def->category = L("Support");
def->tooltip = L("Number of bottom interface layers");
def->sidetext = L("layers");
def->min = -1;
def->enum_values.push_back("-1");
append(def->enum_values, support_interface_top_layers->enum_values);
def->enum_labels.push_back(L("Same as top"));
append(def->enum_labels, support_interface_top_layers->enum_labels);
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("support_interface_spacing", coFloat);
def->label = L("Top interface spacing");
def->category = L("Support");
def->tooltip = L("Spacing of interface lines. Zero means solid interface");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.5));
//BBS
def = this->add("support_bottom_interface_spacing", coFloat);
def->label = L("Bottom interface spacing");
def->category = L("Support");
def->tooltip = L("Spacing of bottom interface lines. Zero means solid interface");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.5));
def = this->add("support_interface_speed", coFloat);
def->label = L("Support interface");
def->category = L("Speed");
def->tooltip = L("Speed of support interface");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(80));
def = this->add("support_base_pattern", coEnum);
def->label = L("Base pattern");
def->category = L("Support");
def->tooltip = L("Line pattern of support");
def->enum_keys_map = &ConfigOptionEnum<SupportMaterialPattern>::get_enum_values();
def->enum_values.push_back("default");
def->enum_values.push_back("rectilinear");
def->enum_values.push_back("rectilinear-grid");
def->enum_values.push_back("honeycomb");
def->enum_values.push_back("lightning");
def->enum_values.push_back("hollow");
def->enum_labels.push_back(L("Default"));
def->enum_labels.push_back(L("Rectilinear"));
def->enum_labels.push_back(L("Rectilinear grid"));
def->enum_labels.push_back(L("Honeycomb"));
def->enum_labels.push_back(L("Lightning"));
def->enum_labels.push_back(L("Hollow"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SupportMaterialPattern>(smpDefault));
def = this->add("support_interface_pattern", coEnum);
def->label = L("Interface pattern");
def->category = L("Support");
def->tooltip = L("Line pattern of support interface. "
"Default pattern for non-soluble support interface is Rectilinear, "
"while default pattern for soluble support interface is Concentric");
def->enum_keys_map = &ConfigOptionEnum<SupportMaterialInterfacePattern>::get_enum_values();
def->enum_values.push_back("auto");
def->enum_values.push_back("rectilinear");
def->enum_values.push_back("concentric");
def->enum_values.push_back("rectilinear_interlaced");
def->enum_values.push_back("grid");
def->enum_labels.push_back(L("Default"));
def->enum_labels.push_back(L("Rectilinear"));
def->enum_labels.push_back(L("Concentric"));
def->enum_labels.push_back(L("Rectilinear Interlaced"));
def->enum_labels.push_back(L("Grid"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SupportMaterialInterfacePattern>(smipAuto));
def = this->add("support_base_pattern_spacing", coFloat);
def->label = L("Base pattern spacing");
def->category = L("Support");
def->tooltip = L("Spacing between support lines");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(2.5));
def = this->add("support_expansion", coFloat);
def->label = L("Normal Support expansion");
def->category = L("Support");
def->tooltip = L("Expand (+) or shrink (-) the horizontal span of normal support");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("support_speed", coFloat);
def->label = L("Support");
def->category = L("Speed");
def->tooltip = L("Speed of support");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(80));
def = this->add("support_style", coEnum);
def->label = L("Style");
def->category = L("Support");
def->tooltip = L("Style and shape of the support. For normal support, projecting the supports into a regular grid "
"will create more stable supports (default), while snug support towers will save material and reduce "
"object scarring.\n"
"For tree support, slim and organic style will merge branches more aggressively and save "
"a lot of material (default organic), while hybrid style will create similar structure to normal support "
"under large flat overhangs.");
def->enum_keys_map = &ConfigOptionEnum<SupportMaterialStyle>::get_enum_values();
def->enum_values.push_back("default");
def->enum_values.push_back("grid");
def->enum_values.push_back("snug");
def->enum_values.push_back("tree_slim");
def->enum_values.push_back("tree_strong");
def->enum_values.push_back("tree_hybrid");
def->enum_values.push_back("organic");
def->enum_labels.push_back(L("Default"));
def->enum_labels.push_back(L("Grid"));
def->enum_labels.push_back(L("Snug"));
def->enum_labels.push_back(L("Tree Slim"));
def->enum_labels.push_back(L("Tree Strong"));
def->enum_labels.push_back(L("Tree Hybrid"));
def->enum_labels.push_back(L("Organic"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SupportMaterialStyle>(smsDefault));
def = this->add("independent_support_layer_height", coBool);
def->label = L("Independent support layer height");
def->category = L("Support");
def->tooltip = L("Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time."
"This option will be invalid when the prime tower is enabled.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("support_threshold_angle", coInt);
def->label = L("Threshold angle");
def->category = L("Support");
def->tooltip = L("Support will be generated for overhangs whose slope angle is below the threshold.");
def->sidetext = L("°");
def->min = 1;
def->max = 90;
def->mode = comSimple;
def->set_default_value(new ConfigOptionInt(30));
def = this->add("tree_support_branch_angle", coFloat);
def->label = L("Tree support branch angle");
def->category = L("Support");
def->tooltip = L("This setting determines the maximum overhang angle that t he branches of tree support allowed to make."
"If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther.");
def->sidetext = L("°");
def->min = 0;
def->max = 60;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(40.));
def = this->add("tree_support_branch_angle_organic", coFloat);
def->label = L("Tree support branch angle");
def->category = L("Support");
def->tooltip = L("This setting determines the maximum overhang angle that t he branches of tree support allowed to make."
"If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther.");
def->sidetext = L("°");
def->min = 0;
def->max = 60;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(40.));
def = this->add("tree_support_angle_slow", coFloat);
def->label = L("Preferred Branch Angle");
def->category = L("Support");
// TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
def->tooltip = L("The preferred angle of the branches, when they do not have to avoid the model. "
"Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster.");
def->sidetext = L("°");
def->min = 10;
def->max = 85;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(25));
def = this->add("tree_support_branch_distance", coFloat);
def->label = L("Tree support branch distance");
def->category = L("Support");
def->tooltip = L("This setting determines the distance between neighboring tree support nodes.");
def->sidetext = L("mm");
def->min = 1.0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5.));
def = this->add("tree_support_branch_distance_organic", coFloat);
def->label = L("Tree support branch distance");
def->category = L("Support");
def->tooltip = L("This setting determines the distance between neighboring tree support nodes.");
def->sidetext = L("mm");
def->min = 1.0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("tree_support_top_rate", coPercent);
def->label = L("Branch Density");
def->category = L("Support");
// TRN PrintSettings: "Organic supports" > "Branch Density"
def->tooltip = L("Adjusts the density of the support structure used to generate the tips of the branches. "
"A higher value results in better overhangs but the supports are harder to remove, "
"thus it is recommended to enable top support interfaces instead of a high branch density value "
"if dense interfaces are needed.");
def->sidetext = L("%");
def->min = 5;
def->max_literal = 35;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(30));
def = this->add("tree_support_adaptive_layer_height", coBool);
def->label = L("Adaptive layer height");
def->category = L("Quality");
def->tooltip = L("Enabling this option means the height of tree support layer except the first will be automatically calculated ");
def->set_default_value(new ConfigOptionBool(1));
def = this->add("tree_support_auto_brim", coBool);
def->label = L("Auto brim width");
def->category = L("Quality");
def->tooltip = L("Enabling this option means the width of the brim for tree support will be automatically calculated");
def->set_default_value(new ConfigOptionBool(1));
def = this->add("tree_support_brim_width", coFloat);
def->label = L("Tree support brim width");
def->category = L("Quality");
def->min = 0.0;
def->tooltip = L("Distance from tree branch to the outermost brim line");
def->set_default_value(new ConfigOptionFloat(3));
def = this->add("tree_support_tip_diameter", coFloat);
def->label = L("Tip Diameter");
def->category = L("Support");
// TRN PrintSettings: "Organic supports" > "Tip Diameter"
def->tooltip = L("Branch tip diameter for organic supports.");
def->sidetext = L("mm");
def->min = 0.1f;
def->max = 100.f;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.8));
def = this->add("tree_support_branch_diameter", coFloat);
def->label = L("Tree support branch diameter");
def->category = L("Support");
def->tooltip = L("This setting determines the initial diameter of support nodes.");
def->sidetext = L("mm");
def->min = 1.0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5.));
def = this->add("tree_support_branch_diameter_organic", coFloat);
def->label = L("Tree support branch diameter");
def->category = L("Support");
def->tooltip = L("This setting determines the initial diameter of support nodes.");
def->sidetext = L("mm");
def->min = 1.0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(2.));
def = this->add("tree_support_branch_diameter_angle", coFloat);
// TRN PrintSettings: #lmFIXME
def->label = L("Branch Diameter Angle");
def->category = L("Support");
// TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
def->tooltip = L("The angle of the branches' diameter as they gradually become thicker towards the bottom. "
"An angle of 0 will cause the branches to have uniform thickness over their length. "
"A bit of an angle can increase stability of the organic support.");
def->sidetext = L("°");
def->min = 0;
def->max = 15;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5));
def = this->add("tree_support_branch_diameter_double_wall", coFloat);
def->label = L("Branch Diameter with double walls");
def->category = L("Support");
// TRN PrintSettings: "Organic supports" > "Branch Diameter"
def->tooltip = L("Branches with area larger than the area of a circle of this diameter will be printed with double walls for stability. "
"Set this value to zero for no double walls.");
def->sidetext = L("mm");
def->min = 0;
def->max = 100.f;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(3.));
def = this->add("tree_support_wall_count", coInt);
def->label = L("Support wall loops");
def->category = L("Support");
def->tooltip = L("This setting specify the count of walls around support");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("tree_support_with_infill", coBool);
def->label = L("Tree support with infill");
def->category = L("Support");
def->tooltip = L("This setting specifies whether to add infill inside large hollows of tree support");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("activate_chamber_temp_control",coBools);
def->label = L("Activate temperature control");
def->tooltip = L("Enable this option for chamber temperature control. An M191 command will be added before \"machine_start_gcode\"\nG-code commands: M141/M191 S(0-255)");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBools{false});
def = this->add("chamber_temperature", coInts);
def->label = L("Chamber temperature");
def->tooltip = L("Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on."
"At the same time, the air filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and other low temperature materials,"
"the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
);
def->sidetext = L("°C");
def->full_label = L("Chamber temperature");
def->min = 0;
def->max = max_temp;
def->set_default_value(new ConfigOptionInts{0});
def = this->add("nozzle_temperature", coInts);
def->label = L("Other layers");
def->tooltip = L("Nozzle temperature for layers after the initial one");
def->sidetext = L("°C");
def->full_label = L("Nozzle temperature");
def->min = 0;
def->max = max_temp;
def->set_default_value(new ConfigOptionInts { 200 });
def = this->add("nozzle_temperature_range_low", coInts);
def->label = L("Min");
//def->tooltip = "";
def->sidetext = L("°C");
def->min = 0;
def->max = max_temp;
def->set_default_value(new ConfigOptionInts { 190 });
def = this->add("nozzle_temperature_range_high", coInts);
def->label = L("Max");
//def->tooltip = "";
def->sidetext = L("°C");
def->min = 0;
def->max = max_temp;
def->set_default_value(new ConfigOptionInts { 240 });
def = this->add("head_wrap_detect_zone", coPoints);
def->label ="Head wrap detect zone"; //do not need translation
def->mode = comDevelop;
def->set_default_value(new ConfigOptionPoints{});
def = this->add("detect_thin_wall", coBool);
def->label = L("Detect thin wall");
def->category = L("Strength");
def->tooltip = L("Detect thin wall which can't contain two line width. And use single line to print. "
"Maybe printed not very well, because it's not closed loop");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("change_filament_gcode", coString);
def->label = L("Change filament G-code");
def->tooltip = L("This gcode is inserted when change filament, including T command to trigger tool change");
def->multiline = true;
def->full_width = true;
def->height = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("change_extrusion_role_gcode", coString);
def->label = L("Change extrusion role G-code");
def->tooltip = L("This gcode is inserted when the extrusion role is changed");
def->multiline = true;
def->full_width = true;
def->height = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionString(""));
def = this->add("top_surface_line_width", coFloatOrPercent);
def->label = L("Top surface");
def->category = L("Quality");
def->tooltip = L("Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
def->max = 1000;
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("top_surface_speed", coFloat);
def->label = L("Top surface");
def->category = L("Speed");
def->tooltip = L("Speed of top surface infill which is solid");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100));
def = this->add("top_shell_layers", coInt);
def->label = L("Top shell layers");
def->category = L("Strength");
def->tooltip = L("This is the number of solid layers of top shell, including the top "
"surface layer. When the thickness calculated by this value is thinner "
"than top shell thickness, the top shell layers will be increased");
def->full_label = L("Top solid layers");
def->min = 0;
def->set_default_value(new ConfigOptionInt(4));
def = this->add("top_shell_thickness", coFloat);
def->label = L("Top shell thickness");
def->category = L("Strength");
def->tooltip = L("The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is "
"thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that "
"this setting is disabled and thickness of top shell is absolutely determained by top shell layers");
def->full_label = L("Top shell thickness");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.6));
def = this->add("travel_speed", coFloat);
def->label = L("Travel");
def->tooltip = L("Speed of travel which is faster and without extrusion");
def->sidetext = L("mm/s");
def->min = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(120));
def = this->add("travel_speed_z", coFloat);
//def->label = L("Z travel");
//def->tooltip = L("Speed of vertical travel along z axis. "
// "This is typically lower because build plate or gantry is hard to be moved. "
// "Zero means using travel speed directly in gcode, but will be limited by printer's ability when run gcode");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("wipe", coBools);
def->label = L("Wipe while retracting");
def->tooltip = L("Move nozzle along the last extrusion path when retracting to clean leaked material on nozzle. "
"This can minimize blob when print new part after travel");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBools { false });
def = this->add("wipe_distance", coFloats);
def->label = L("Wipe Distance");
def->tooltip = L("Discribe how long the nozzle will move along the last path when retracting. \n\nDepending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament. \n\nSetting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after.");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats { 1. });
def = this->add("enable_prime_tower", coBool);
def->label = L("Enable");
def->tooltip = L("The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, "
"in order to avoid appearance defects when printing objects.");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("flush_volumes_vector", coFloats);
// BBS: remove _L()
def->label = ("Purging volumes - load/unload volumes");
//def->tooltip = L("This vector saves required volumes to change from/to each tool used on the "
// "wipe tower. These values are used to simplify creation of the full purging "
// "volumes below.");
// BBS: change 70.f => 140.f
def->set_default_value(new ConfigOptionFloats { 140.f, 140.f, 140.f, 140.f, 140.f, 140.f, 140.f, 140.f });
def = this->add("flush_volumes_matrix", coFloats);
def->label = L("Purging volumes");
//def->tooltip = L("This matrix describes volumes (in cubic milimetres) required to purge the"
// " new filament on the wipe tower for any given pair of tools.");
// BBS: change 140.f => 280.f
def->set_default_value(new ConfigOptionFloats { 0.f, 280.f, 280.f, 280.f,
280.f, 0.f, 280.f, 280.f,
280.f, 280.f, 0.f, 280.f,
280.f, 280.f, 280.f, 0.f });
def = this->add("flush_multiplier", coFloat);
def->label = L("Flush multiplier");
def->tooltip = L("The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table.");
def->sidetext = "";
def->set_default_value(new ConfigOptionFloat(0.3));
// BBS
def = this->add("prime_volume", coFloat);
def->label = L("Prime volume");
def->tooltip = L("The volume of material to prime extruder on tower.");
def->sidetext = L("mm³");
def->min = 1.0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(45.));
def = this->add("wipe_tower_x", coFloats);
//def->label = L("Position X");
//def->tooltip = L("X coordinate of the left front corner of a wipe tower");
//def->sidetext = L("mm");
def->mode = comDevelop;
// BBS: change data type to floats to add partplate logic
def->set_default_value(new ConfigOptionFloats{ 15. });
def = this->add("wipe_tower_y", coFloats);
//def->label = L("Position Y");
//def->tooltip = L("Y coordinate of the left front corner of a wipe tower");
//def->sidetext = L("mm");
def->mode = comDevelop;
// BBS: change data type to floats to add partplate logic
def->set_default_value(new ConfigOptionFloats{ 220. });
def = this->add("prime_tower_width", coFloat);
def->label = L("Width");
def->tooltip = L("Width of prime tower");
def->sidetext = L("mm");
def->min = 2.0;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(60.));
def = this->add("wipe_tower_rotation_angle", coFloat);
def->label = L("Wipe tower rotation angle");
def->tooltip = L("Wipe tower rotation angle with respect to x-axis.");
def->sidetext = L("°");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("prime_tower_brim_width", coFloat);
def->label = L("Brim width");
def->tooltip = L("Brim width");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->min = 0.;
def->set_default_value(new ConfigOptionFloat(3.));
def = this->add("wipe_tower_cone_angle", coFloat);
def->label = L("Stabilization cone apex angle");
def->tooltip = L("Angle at the apex of the cone that is used to stabilize the wipe tower. "
"Larger angle means wider base.");
def->sidetext = L("°");
def->mode = comAdvanced;
def->min = 0.;
def->max = 90.;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("wipe_tower_extra_spacing", coPercent);
def->label = L("Wipe tower purge lines spacing");
def->tooltip = L("Spacing of purge lines on the wipe tower.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 100.;
def->max = 300.;
def->set_default_value(new ConfigOptionPercent(100.));
def = this->add("wipe_tower_extruder", coInt);
def->label = L("Wipe tower extruder");
def->category = L("Extruders");
def->tooltip = L("The extruder to use when printing perimeter of the wipe tower. "
"Set to 0 to use the one that is available (non-soluble would be preferred).");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(0));
def = this->add("wiping_volumes_extruders", coFloats);
def->label = L("Purging volumes - load/unload volumes");
def->tooltip = L("This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below.");
def->set_default_value(new ConfigOptionFloats { 70., 70., 70., 70., 70., 70., 70., 70., 70., 70. });
def = this->add("flush_into_infill", coBool);
def->category = L("Flush options");
def->label = L("Flush into objects' infill");
def->tooltip = L("Purging after filament change will be done inside objects' infills. "
"This may lower the amount of waste and decrease the print time. "
"If the walls are printed with transparent filament, the mixed color infill will be seen outside. "
"It will not take effect, unless the prime tower is enabled.");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("flush_into_support", coBool);
def->category = L("Flush options");
def->label = L("Flush into objects' support");
def->tooltip = L("Purging after filament change will be done inside objects' support. "
"This may lower the amount of waste and decrease the print time. "
"It will not take effect, unless the prime tower is enabled.");
def->set_default_value(new ConfigOptionBool(true));
def = this->add("flush_into_objects", coBool);
def->category = L("Flush options");
def->label = L("Flush into this object");
def->tooltip = L("This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. "
"Colours of the objects will be mixed as a result. "
"It will not take effect, unless the prime tower is enabled.");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("wipe_tower_bridging", coFloat);
def->label = L("Maximal bridging distance");
def->tooltip = L("Maximal distance between supports on sparse infill sections.");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10.));
def = this->add("xy_hole_compensation", coFloat);
def->label = L("X-Y hole compensation");
def->category = L("Quality");
def->tooltip = L("Holes of object will be grown or shrunk in XY plane by the configured value. "
"Positive value makes holes bigger. Negative value makes holes smaller. "
"This function is used to adjust size slightly when the object has assembling issue");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("xy_contour_compensation", coFloat);
def->label = L("X-Y contour compensation");
def->category = L("Quality");
def->tooltip = L("Contour of object will be grown or shrunk in XY plane by the configured value. "
"Positive value makes contour bigger. Negative value makes contour smaller. "
"This function is used to adjust size slightly when the object has assembling issue");
def->sidetext = L("mm");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("hole_to_polyhole", coBool);
def->label = L("Convert holes to polyholes");
def->category = L("Quality");
def->tooltip = L("Search for almost-circular holes that span more than one layer and convert the geometry to polyholes."
" Use the nozzle size and the (biggest) diameter to compute the polyhole."
"\nSee http://hydraraptor.blogspot.com/2011/02/polyholes.html");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("hole_to_polyhole_threshold", coFloatOrPercent);
def->label = L("Polyhole detection margin");
def->category = L("Quality");
def->tooltip = L("Maximum defection of a point to the estimated radius of the circle."
"\nAs cylinders are often exported as triangles of varying size, points may not be on the circle circumference."
" This setting allows you some leway to broaden the detection."
"\nIn mm or in % of the radius.");
def->sidetext = L("mm or %");
def->max_literal = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0.01, false));
def = this->add("hole_to_polyhole_twisted", coBool);
def->label = L("Polyhole twist");
def->category = L("Quality");
def->tooltip = L("Rotate the polyhole every layer.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("thumbnails", coPoints);
def->label = L("G-code thumbnails");
def->tooltip = L("Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"");
def->mode = comAdvanced;
def->gui_type = ConfigOptionDef::GUIType::one_string;
def->set_default_value(new ConfigOptionPoints{Vec2d(300, 300)});
def = this->add("thumbnails_format", coEnum);
def->label = L("Format of G-code thumbnails");
def->tooltip = L("Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware");
def->mode = comAdvanced;
def->enum_keys_map = &ConfigOptionEnum<GCodeThumbnailsFormat>::get_enum_values();
def->enum_values.push_back("PNG");
def->enum_values.push_back("JPG");
def->enum_values.push_back("QOI");
def->enum_values.push_back("BTT_TFT");
def->enum_values.push_back("ColPic");
def->enum_labels.push_back("PNG");
def->enum_labels.push_back("JPG");
def->enum_labels.push_back("QOI");
def->enum_labels.push_back("BTT TT");
def->enum_labels.push_back("ColPic");
def->set_default_value(new ConfigOptionEnum<GCodeThumbnailsFormat>(GCodeThumbnailsFormat::PNG));
def = this->add("use_relative_e_distances", coBool);
def->label = L("Use relative E distances");
def->tooltip = L("Relative extrusion is recommended when using \"label_objects\" option."
"Some extruders work better with this option unckecked (absolute extrusion mode). "
"Wipe tower is only compatible with relative mode. It is recommended on "
"most printers. Default is checked");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("wall_generator", coEnum);
def->label = L("Wall generator");
def->category = L("Quality");
def->tooltip = L("Classic wall generator produces walls with constant extrusion width and for "
"very thin areas is used gap-fill. "
"Arachne engine produces walls with variable extrusion width");
def->enum_keys_map = &ConfigOptionEnum<PerimeterGeneratorType>::get_enum_values();
def->enum_values.push_back("classic");
def->enum_values.push_back("arachne");
def->enum_labels.push_back(L("Classic"));
def->enum_labels.push_back(L("Arachne"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<PerimeterGeneratorType>(PerimeterGeneratorType::Arachne));
def = this->add("wall_transition_length", coPercent);
def->label = L("Wall transition length");
def->category = L("Quality");
def->tooltip = L("When transitioning between different numbers of walls as the part becomes "
"thinner, a certain amount of space is allotted to split or join the wall segments. "
"It's expressed as a percentage over nozzle diameter");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("wall_transition_filter_deviation", coPercent);
def->label = L("Wall transitioning filter margin");
def->category = L("Quality");
def->tooltip = L("Prevent transitioning back and forth between one extra wall and one less. This "
"margin extends the range of extrusion widths which follow to [Minimum wall width "
"- margin, 2 * Minimum wall width + margin]. Increasing this margin "
"reduces the number of transitions, which reduces the number of extrusion "
"starts/stops and travel time. However, large extrusion width variation can lead to "
"under- or overextrusion problems. "
"It's expressed as a percentage over nozzle diameter");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionPercent(25));
def = this->add("wall_transition_angle", coFloat);
def->label = L("Wall transitioning threshold angle");
def->category = L("Quality");
def->tooltip = L("When to create transitions between even and odd numbers of walls. A wedge shape with"
" an angle greater than this setting will not have transitions and no walls will be "
"printed in the center to fill the remaining space. Reducing this setting reduces "
"the number and length of these center walls, but may leave gaps or overextrude");
def->sidetext = L("°");
def->mode = comAdvanced;
def->min = 1.;
def->max = 59.;
def->set_default_value(new ConfigOptionFloat(10.));
def = this->add("wall_distribution_count", coInt);
def->label = L("Wall distribution count");
def->category = L("Quality");
def->tooltip = L("The number of walls, counted from the center, over which the variation needs to be "
"spread. Lower values mean that the outer walls don't change in width");
def->mode = comAdvanced;
def->min = 1;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("min_feature_size", coPercent);
def->label = L("Minimum feature size");
def->category = L("Quality");
def->tooltip = L("Minimum thickness of thin features. Model features that are thinner than this value will "
"not be printed, while features thicker than the Minimum feature size will be widened to "
"the Minimum wall width. "
"It's expressed as a percentage over nozzle diameter");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionPercent(25));
def = this->add("initial_layer_min_bead_width", coPercent);
def->label = L("First layer minimum wall width");
def->category = L("Quality");
def->tooltip = L("The minimum wall width that should be used for the first layer is recommended to be set "
"to the same size as the nozzle. This adjustment is expected to enhance adhesion.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionPercent(85));
def = this->add("min_bead_width", coPercent);
def->label = L("Minimum wall width");
def->category = L("Quality");
def->tooltip = L("Width of the wall that will replace thin features (according to the Minimum feature size) "
"of the model. If the Minimum wall width is thinner than the thickness of the feature,"
" the wall will become as thick as the feature itself. "
"It's expressed as a percentage over nozzle diameter");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionPercent(85));
// Declare retract values for filament profile, overriding the printer's extruder profile.
for (const char *opt_key : {
// floats
"retraction_length", "z_hop", "z_hop_types", "retract_lift_above", "retract_lift_below", "retract_lift_enforce", "retraction_speed", "deretraction_speed", "retract_restart_extra", "retraction_minimum_travel",
// BBS: floats
"wipe_distance",
// bools
"retract_when_changing_layer", "wipe",
// percents
"retract_before_wipe"}) {
auto it_opt = options.find(opt_key);
assert(it_opt != options.end());
def = this->add_nullable(std::string("filament_") + opt_key, it_opt->second.type);
def->label = it_opt->second.label;
def->full_label = it_opt->second.full_label;
def->tooltip = it_opt->second.tooltip;
def->sidetext = it_opt->second.sidetext;
def->enum_keys_map = it_opt->second.enum_keys_map;
def->enum_labels = it_opt->second.enum_labels;
def->enum_values = it_opt->second.enum_values;
//BBS: shown specific filament retract config because we hide the machine retract into comDevelop mode
if ((strcmp(opt_key, "retraction_length") == 0) ||
(strcmp(opt_key, "z_hop") == 0))
def->mode = comSimple;
else
def->mode = comAdvanced;
switch (def->type) {
case coFloats : def->set_default_value(new ConfigOptionFloatsNullable (static_cast<const ConfigOptionFloats* >(it_opt->second.default_value.get())->values)); break;
case coPercents : def->set_default_value(new ConfigOptionPercentsNullable(static_cast<const ConfigOptionPercents*>(it_opt->second.default_value.get())->values)); break;
case coBools : def->set_default_value(new ConfigOptionBoolsNullable (static_cast<const ConfigOptionBools* >(it_opt->second.default_value.get())->values)); break;
case coEnums : def->set_default_value(new ConfigOptionEnumsGenericNullable(static_cast<const ConfigOptionEnumsGeneric* >(it_opt->second.default_value.get())->values)); break;
default: assert(false);
}
}
def = this->add("detect_narrow_internal_solid_infill", coBool);
def->label = L("Detect narrow internal solid infill");
def->category = L("Strength");
def->tooltip = L("This option will auto detect narrow internal solid infill area."
" If enabled, concentric pattern will be used for the area to speed printing up."
" Otherwise, rectilinear pattern is used defaultly.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
}
void PrintConfigDef::init_extruder_option_keys()
{
// ConfigOptionFloats, ConfigOptionPercents, ConfigOptionBools, ConfigOptionStrings
m_extruder_option_keys = {
"nozzle_diameter", "min_layer_height", "max_layer_height", "extruder_offset",
"retraction_length", "z_hop", "z_hop_types", "retract_lift_above", "retract_lift_below", "retract_lift_enforce", "retraction_speed", "deretraction_speed",
"retract_before_wipe", "retract_restart_extra", "retraction_minimum_travel", "wipe", "wipe_distance",
"retract_when_changing_layer", "retract_length_toolchange", "retract_restart_extra_toolchange", "extruder_colour",
"default_filament_profile"
};
m_extruder_retract_keys = {
"deretraction_speed",
"retract_before_wipe",
"retract_lift_above",
"retract_lift_below",
"retract_lift_enforce",
"retract_restart_extra",
"retract_when_changing_layer",
"retraction_length",
"retraction_minimum_travel",
"retraction_speed",
"wipe",
"wipe_distance",
"z_hop",
"z_hop_types"
};
assert(std::is_sorted(m_extruder_retract_keys.begin(), m_extruder_retract_keys.end()));
}
void PrintConfigDef::init_filament_option_keys()
{
m_filament_option_keys = {
"filament_diameter", "min_layer_height", "max_layer_height",
"retraction_length", "z_hop", "z_hop_types", "retract_lift_above", "retract_lift_below", "retract_lift_enforce", "retraction_speed", "deretraction_speed",
"retract_before_wipe", "retract_restart_extra", "retraction_minimum_travel", "wipe", "wipe_distance",
"retract_when_changing_layer", "retract_length_toolchange", "retract_restart_extra_toolchange", "filament_colour",
"default_filament_profile"/*,"filament_seam_gap"*/
};
m_filament_retract_keys = {
"deretraction_speed",
"retract_before_wipe",
"retract_lift_above",
"retract_lift_below",
"retract_lift_enforce",
"retract_restart_extra",
"retract_when_changing_layer",
"retraction_length",
"retraction_minimum_travel",
"retraction_speed",
"wipe",
"wipe_distance",
"z_hop",
"z_hop_types"
};
assert(std::is_sorted(m_filament_retract_keys.begin(), m_filament_retract_keys.end()));
}
void PrintConfigDef::init_sla_params()
{
ConfigOptionDef* def;
// SLA Printer settings
def = this->add("display_width", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->min = 1;
def->set_default_value(new ConfigOptionFloat(120.));
def = this->add("display_height", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->min = 1;
def->set_default_value(new ConfigOptionFloat(68.));
def = this->add("display_pixels_x", coInt);
def->full_label = L(" ");
def->label = ("X");
def->tooltip = L(" ");
def->min = 100;
def->set_default_value(new ConfigOptionInt(2560));
def = this->add("display_pixels_y", coInt);
def->label = ("Y");
def->tooltip = L(" ");
def->min = 100;
def->set_default_value(new ConfigOptionInt(1440));
def = this->add("display_mirror_x", coBool);
def->full_label = L(" ");
def->label = L(" ");
def->tooltip = L(" ");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("display_mirror_y", coBool);
def->full_label = L(" ");
def->label = L(" ");
def->tooltip = L(" ");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("display_orientation", coEnum);
def->label = L(" ");
def->tooltip = L(" ");
def->enum_keys_map = &ConfigOptionEnum<SLADisplayOrientation>::get_enum_values();
def->enum_values.push_back("landscape");
def->enum_values.push_back("portrait");
def->enum_labels.push_back(L(" "));
def->enum_labels.push_back(L(" "));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SLADisplayOrientation>(sladoPortrait));
def = this->add("fast_tilt_time", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5.));
def = this->add("slow_tilt_time", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(8.));
def = this->add("area_fill", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(50.));
def = this->add("relative_correction", coFloats);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats( { 1., 1.} ));
def = this->add("relative_correction_x", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("relative_correction_y", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("relative_correction_z", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("absolute_correction", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.0));
def = this->add("elefant_foot_min_width", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.2));
def = this->add("gamma_correction", coFloat);
def->label = L(" ");
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->max = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.0));
// SLA Material settings.
def = this->add("material_colour", coString);
def->label = L(" ");
def->tooltip = L(" ");
def->gui_type = ConfigOptionDef::GUIType::color;
def->set_default_value(new ConfigOptionString("#29B2B2"));
def = this->add("material_type", coString);
def->label = L(" ");
def->tooltip = L(" ");
def->gui_type = ConfigOptionDef::GUIType::f_enum_open; // TODO: ???
def->gui_flags = "show_value";
def->enum_values.push_back("Tough");
def->enum_values.push_back("Flexible");
def->enum_values.push_back("Casting");
def->enum_values.push_back("Dental");
def->enum_values.push_back("Heat-resistant");
def->set_default_value(new ConfigOptionString("Tough"));
def = this->add("initial_layer_height", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.3));
def = this->add("bottle_volume", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 50;
def->set_default_value(new ConfigOptionFloat(1000.0));
def = this->add("bottle_weight", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(1.0));
def = this->add("material_density", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(1.0));
def = this->add("bottle_cost", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.0));
def = this->add("faded_layers", coInt);
def->label = L(" ");
def->tooltip = L(" ");
def->min = 3;
def->max = 20;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(10));
def = this->add("min_exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("max_exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100));
def = this->add("exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(10));
def = this->add("min_initial_exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("max_initial_exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(150));
def = this->add("initial_exposure_time", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(15));
def = this->add("material_correction", coFloats);
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloats( { 1., 1., 1. } ));
def = this->add("material_correction_x", coFloat);
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("material_correction_y", coFloat);
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("material_correction_z", coFloat);
def->full_label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("material_vendor", coString);
def->set_default_value(new ConfigOptionString(""));
def->cli = ConfigOptionDef::nocli;
def = this->add("default_sla_material_profile", coString);
def->label = L(" ");
def->tooltip = L(" ");
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("sla_material_settings_id", coString);
def->set_default_value(new ConfigOptionString(""));
def->cli = ConfigOptionDef::nocli;
def = this->add("default_sla_print_profile", coString);
def->label = L(" ");
def->tooltip = L(" ");
def->set_default_value(new ConfigOptionString());
def->cli = ConfigOptionDef::nocli;
def = this->add("sla_print_settings_id", coString);
def->set_default_value(new ConfigOptionString(""));
def->cli = ConfigOptionDef::nocli;
def = this->add("supports_enable", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("support_head_front_diameter", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.4));
def = this->add("support_head_penetration", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->mode = comAdvanced;
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.2));
def = this->add("support_head_width", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 20;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.0));
def = this->add("support_pillar_diameter", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 15;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(1.0));
def = this->add("support_small_pillar_diameter_percent", coPercent);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(50));
def = this->add("support_max_bridges_on_pillar", coInt);
def->label = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->max = 50;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(3));
def = this->add("support_pillar_connection_mode", coEnum);
def->label = L(" ");
def->tooltip = L(" ");
def->enum_keys_map = &ConfigOptionEnum<SLAPillarConnectionMode>::get_enum_values();
def->enum_values.push_back("zigzag");
def->enum_values.push_back("cross");
def->enum_values.push_back("dynamic");
def->enum_labels.push_back(L(" "));
def->enum_labels.push_back(L(" "));
def->enum_labels.push_back(L(" "));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SLAPillarConnectionMode>(slapcmDynamic));
def = this->add("support_buildplate_only", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("support_pillar_widening_factor", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->max = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.0));
def = this->add("support_base_diameter", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 30;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(4.0));
def = this->add("support_base_height", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.0));
def = this->add("support_base_safety_distance", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("support_critical_angle", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 90;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(45));
def = this->add("support_max_bridge_length", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(15.0));
def = this->add("support_max_pillar_link_distance", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0; // 0 means no linking
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10.0));
def = this->add("support_object_elevation", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 150; // This is the max height of print on SL1
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(5.0));
def = this->add("support_points_density_relative", coInt);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->set_default_value(new ConfigOptionInt(100));
def = this->add("support_points_minimal_distance", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L("mm");
def->min = 0;
def->set_default_value(new ConfigOptionFloat(1.));
def = this->add("pad_enable", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("pad_wall_thickness", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 30;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(2.0));
def = this->add("pad_wall_height", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->category = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 30;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.));
def = this->add("pad_brim_size", coFloat);
def->label = L(" ");
def->tooltip = L(" ");
def->category = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 30;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1.6));
def = this->add("pad_max_merge_distance", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(50.0));
def = this->add("pad_wall_slope", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 45;
def->max = 90;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(90.0));
def = this->add("pad_around_object", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("pad_around_object_everywhere", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("pad_object_gap", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(1));
def = this->add("pad_object_connector_stride", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10));
def = this->add("pad_object_connector_width", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.5));
def = this->add("pad_object_connector_penetration", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.3));
def = this->add("hollowing_enable", coBool);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->mode = comSimple;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("hollowing_min_thickness", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L(" ");
def->min = 1;
def->max = 10;
def->mode = comSimple;
def->set_default_value(new ConfigOptionFloat(3.));
def = this->add("hollowing_quality", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->min = 0;
def->max = 1;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.5));
def = this->add("hollowing_closing_distance", coFloat);
def->label = L(" ");
def->category = L(" ");
def->tooltip = L(" ");
def->sidetext = L("mm");
def->min = 0;
def->max = 10;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(2.0));
def = this->add("material_print_speed", coEnum);
def->label = L(" ");
def->tooltip = L(" ");
def->enum_keys_map = &ConfigOptionEnum<SLAMaterialSpeed>::get_enum_values();
def->enum_values.push_back("slow");
def->enum_values.push_back("fast");
def->enum_labels.push_back(L(" "));
def->enum_labels.push_back(L(" "));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SLAMaterialSpeed>(slamsFast));
}
void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &value)
{
//BBS: handle legacy options
if (opt_key == "enable_wipe_tower") {
opt_key = "enable_prime_tower";
} else if (opt_key == "wipe_tower_width") {
opt_key = "prime_tower_width";
} else if (opt_key == "wiping_volume") {
opt_key = "prime_volume";
} else if (opt_key == "wipe_tower_brim_width") {
opt_key = "prime_tower_brim_width";
} else if (opt_key == "tool_change_gcode") {
opt_key = "change_filament_gcode";
} else if (opt_key == "bridge_fan_speed") {
opt_key = "overhang_fan_speed";
} else if (opt_key == "infill_extruder") {
opt_key = "sparse_infill_filament";
}else if (opt_key == "solid_infill_extruder") {
opt_key = "solid_infill_filament";
}else if (opt_key == "perimeter_extruder") {
opt_key = "wall_filament";
} else if (opt_key == "support_material_extruder") {
opt_key = "support_filament";
} else if (opt_key == "support_material_interface_extruder") {
opt_key = "support_interface_filament";
} else if (opt_key == "support_material_angle") {
opt_key = "support_angle";
} else if (opt_key == "support_material_enforce_layers") {
opt_key = "enforce_support_layers";
} else if ((opt_key == "initial_layer_print_height" ||
opt_key == "initial_layer_speed" ||
opt_key == "internal_solid_infill_speed" ||
opt_key == "top_surface_speed" ||
opt_key == "support_interface_speed" ||
opt_key == "outer_wall_speed" ||
opt_key == "support_object_xy_distance") && value.find("%") != std::string::npos) {
//BBS: this is old profile in which value is expressed as percentage.
//But now these key-value must be absolute value.
//Reset to default value by erasing these key to avoid parsing error.
opt_key = "";
} else if (opt_key == "inherits_cummulative") {
opt_key = "inherits_group";
} else if (opt_key == "compatible_printers_condition_cummulative") {
opt_key = "compatible_machine_expression_group";
} else if (opt_key == "compatible_prints_condition_cummulative") {
opt_key = "compatible_process_expression_group";
} else if (opt_key == "cooling") {
opt_key = "slow_down_for_layer_cooling";
} else if (opt_key == "timelapse_no_toolhead") {
opt_key = "timelapse_type";
} else if (opt_key == "timelapse_type" && value == "2") {
// old file "0" is None, "2" is Traditional
// new file "0" is Traditional, erase "2"
value = "0";
} else if (opt_key == "support_type" && value == "normal") {
value = "normal(manual)";
} else if (opt_key == "support_type" && value == "tree") {
value = "tree(manual)";
} else if (opt_key == "support_type" && value == "hybrid(auto)") {
value = "tree(auto)";
} else if (opt_key == "support_base_pattern" && value == "none") {
value = "hollow";
} else if (opt_key == "different_settings_to_system") {
std::string copy_value = value;
copy_value.erase(std::remove(copy_value.begin(), copy_value.end(), '\"'), copy_value.end()); // remove '"' in string
std::set<std::string> split_keys = SplitStringAndRemoveDuplicateElement(copy_value, ";");
for (std::string split_key : split_keys) {
std::string copy_key = split_key, copy_value = "";
handle_legacy(copy_key, copy_value);
if (copy_key != split_key) {
ReplaceString(value, split_key, copy_key);
}
}
} else if (opt_key == "overhang_fan_threshold" && value == "5%") {
value = "10%";
} else if( opt_key == "wall_infill_order" ) {
if (value == "inner wall/outer wall/infill" || value == "infill/inner wall/outer wall") {
opt_key = "wall_sequence";
value = "inner wall/outer wall";
} else if (value == "outer wall/inner wall/infill" || value == "infill/outer wall/inner wall") {
opt_key = "wall_sequence";
value = "outer wall/inner wall";
} else if (value == "inner-outer-inner wall/infill") {
opt_key = "wall_sequence";
value = "inner-outer-inner wall";
} else {
opt_key = "wall_sequence";
}
} else if(opt_key == "single_extruder_multi_material") {
value = "1";
}
else if (opt_key == "sparse_infill_anchor") {
opt_key = "infill_anchor";
}
else if (opt_key == "sparse_infill_anchor_max") {
opt_key = "infill_anchor_max";
}
else if (opt_key == "chamber_temperatures") {
opt_key = "chamber_temperature";
}
else if (opt_key == "thumbnail_size") {
opt_key = "thumbnails";
}
else if (opt_key == "top_one_wall_type" && value != "none") {
opt_key = "only_one_wall_top";
value = "1";
}
else if (opt_key == "initial_layer_flow_ratio") {
opt_key = "bottom_solid_infill_flow_ratio";
}
else if(opt_key == "ironing_direction") {
opt_key = "ironing_angle";
}
// Ignore the following obsolete configuration keys:
static std::set<std::string> ignore = {
"acceleration", "scale", "rotate", "duplicate", "duplicate_grid",
"bed_size",
"print_center", "g0", "wipe_tower_per_color_wipe"
// BBS
, "support_sharp_tails","support_remove_small_overhangs", "support_with_sheath",
"tree_support_collision_resolution", "tree_support_with_infill",
"max_volumetric_speed", "max_print_speed",
"support_closing_radius",
"remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
"support_transition_line_width", "support_transition_speed", "bed_temperature", "bed_temperature_initial_layer",
"can_switch_nozzle_type", "can_add_auxiliary_fan", "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height",
"z_hop_type", "z_lift_type", "bed_temperature_difference",
"extruder_type",
"internal_bridge_support_thickness","extruder_clearance_max_radius", "top_area_threshold"
};
if (ignore.find(opt_key) != ignore.end()) {
opt_key = "";
return;
}
if (! print_config_def.has(opt_key)) {
opt_key = "";
return;
}
}
const PrintConfigDef print_config_def;
DynamicPrintConfig DynamicPrintConfig::full_print_config()
{
return DynamicPrintConfig((const PrintRegionConfig&)FullPrintConfig::defaults());
}
DynamicPrintConfig::DynamicPrintConfig(const StaticPrintConfig& rhs) : DynamicConfig(rhs, rhs.keys_ref())
{
}
DynamicPrintConfig* DynamicPrintConfig::new_from_defaults_keys(const std::vector<std::string> &keys)
{
auto *out = new DynamicPrintConfig();
out->apply_only(FullPrintConfig::defaults(), keys);
return out;
}
double min_object_distance(const ConfigBase &cfg)
{
const ConfigOptionEnum<PrinterTechnology> *opt_printer_technology = cfg.option<ConfigOptionEnum<PrinterTechnology>>("printer_technology");
auto printer_technology = opt_printer_technology ? opt_printer_technology->value : ptUnknown;
double ret = 0.;
if (printer_technology == ptSLA)
ret = 6.;
else {
//BBS: duplicate_distance seam to be useless
constexpr double duplicate_distance = 6.;
auto ecr_opt = cfg.option<ConfigOptionFloat>("extruder_clearance_radius");
auto co_opt = cfg.option<ConfigOptionEnum<PrintSequence>>("print_sequence");
if (!ecr_opt || !co_opt)
ret = 0.;
else {
// min object distance is max(duplicate_distance, clearance_radius)
ret = ((co_opt->value == PrintSequence::ByObject) && ecr_opt->value > duplicate_distance) ?
ecr_opt->value : duplicate_distance;
}
}
return ret;
}
void DynamicPrintConfig::normalize_fdm(int used_filaments)
{
if (this->has("extruder")) {
int extruder = this->option("extruder")->getInt();
this->erase("extruder");
if (extruder != 0) {
if (!this->has("sparse_infill_filament"))
this->option("sparse_infill_filament", true)->setInt(extruder);
if (!this->has("wall_filament"))
this->option("wall_filament", true)->setInt(extruder);
// Don't propagate the current extruder to support.
// For non-soluble supports, the default "0" extruder means to use the active extruder,
// for soluble supports one certainly does not want to set the extruder to non-soluble.
// if (!this->has("support_filament"))
// this->option("support_filament", true)->setInt(extruder);
// if (!this->has("support_interface_filament"))
// this->option("support_interface_filament", true)->setInt(extruder);
}
}
if (!this->has("solid_infill_filament") && this->has("sparse_infill_filament"))
this->option("solid_infill_filament", true)->setInt(this->option("sparse_infill_filament")->getInt());
if (this->has("spiral_mode") && this->opt<ConfigOptionBool>("spiral_mode", true)->value) {
{
// this should be actually done only on the spiral layers instead of all
auto* opt = this->opt<ConfigOptionBools>("retract_when_changing_layer", true);
opt->values.assign(opt->values.size(), false); // set all values to false
// Disable retract on layer change also for filament overrides.
auto* opt_n = this->opt<ConfigOptionBoolsNullable>("filament_retract_when_changing_layer", true);
opt_n->values.assign(opt_n->values.size(), false); // Set all values to false.
}
{
this->opt<ConfigOptionInt>("wall_loops", true)->value = 1;
this->opt<ConfigOptionBool>("alternate_extra_wall", true)->value = false;
this->opt<ConfigOptionInt>("top_shell_layers", true)->value = 0;
this->opt<ConfigOptionPercent>("sparse_infill_density", true)->value = 0;
}
}
if (auto *opt_gcode_resolution = this->opt<ConfigOptionFloat>("resolution", false); opt_gcode_resolution)
// Resolution will be above 1um.
opt_gcode_resolution->value = std::max(opt_gcode_resolution->value, 0.001);
// BBS
ConfigOptionBool* ept_opt = this->option<ConfigOptionBool>("enable_prime_tower");
if (used_filaments > 0 && ept_opt != nullptr) {
ConfigOptionBool* islh_opt = this->option<ConfigOptionBool>("independent_support_layer_height", true);
//ConfigOptionBool* alh_opt = this->option<ConfigOptionBool>("adaptive_layer_height");
ConfigOptionEnum<PrintSequence>* ps_opt = this->option<ConfigOptionEnum<PrintSequence>>("print_sequence");
ConfigOptionEnum<TimelapseType>* timelapse_opt = this->option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
bool is_smooth_timelapse = timelapse_opt != nullptr && timelapse_opt->value == TimelapseType::tlSmooth;
if (!is_smooth_timelapse && (used_filaments == 1 || ps_opt->value == PrintSequence::ByObject)) {
ept_opt->value = false;
}
if (ept_opt->value) {
if (islh_opt)
islh_opt->value = false;
//if (alh_opt)
// alh_opt->value = false;
}
/* BBS: MusangKing - not sure if this is still valid, just comment it out cause "Independent support layer height" is re-opened.
else {
if (islh_opt)
islh_opt->value = true;
}
*/
}
}
//BBS:divide normalize_fdm to 2 steps and call them one by one in Print::Apply
void DynamicPrintConfig::normalize_fdm_1()
{
if (this->has("extruder")) {
int extruder = this->option("extruder")->getInt();
this->erase("extruder");
if (extruder != 0) {
if (!this->has("sparse_infill_filament"))
this->option("sparse_infill_filament", true)->setInt(extruder);
if (!this->has("wall_filament"))
this->option("wall_filament", true)->setInt(extruder);
// Don't propagate the current extruder to support.
// For non-soluble supports, the default "0" extruder means to use the active extruder,
// for soluble supports one certainly does not want to set the extruder to non-soluble.
// if (!this->has("support_filament"))
// this->option("support_filament", true)->setInt(extruder);
// if (!this->has("support_interface_filament"))
// this->option("support_interface_filament", true)->setInt(extruder);
}
}
if (!this->has("solid_infill_filament") && this->has("sparse_infill_filament"))
this->option("solid_infill_filament", true)->setInt(this->option("sparse_infill_filament")->getInt());
if (this->has("spiral_mode") && this->opt<ConfigOptionBool>("spiral_mode", true)->value) {
{
// this should be actually done only on the spiral layers instead of all
auto* opt = this->opt<ConfigOptionBools>("retract_when_changing_layer", true);
opt->values.assign(opt->values.size(), false); // set all values to false
// Disable retract on layer change also for filament overrides.
auto* opt_n = this->opt<ConfigOptionBoolsNullable>("filament_retract_when_changing_layer", true);
opt_n->values.assign(opt_n->values.size(), false); // Set all values to false.
}
{
this->opt<ConfigOptionInt>("wall_loops", true)->value = 1;
this->opt<ConfigOptionBool>("alternate_extra_wall", true)->value = false;
this->opt<ConfigOptionInt>("top_shell_layers", true)->value = 0;
this->opt<ConfigOptionPercent>("sparse_infill_density", true)->value = 0;
}
}
if (auto *opt_gcode_resolution = this->opt<ConfigOptionFloat>("resolution", false); opt_gcode_resolution)
// Resolution will be above 1um.
opt_gcode_resolution->value = std::max(opt_gcode_resolution->value, 0.001);
return;
}
t_config_option_keys DynamicPrintConfig::normalize_fdm_2(int num_objects, int used_filaments)
{
t_config_option_keys changed_keys;
ConfigOptionBool* ept_opt = this->option<ConfigOptionBool>("enable_prime_tower");
if (used_filaments > 0 && ept_opt != nullptr) {
ConfigOptionBool* islh_opt = this->option<ConfigOptionBool>("independent_support_layer_height", true);
//ConfigOptionBool* alh_opt = this->option<ConfigOptionBool>("adaptive_layer_height");
ConfigOptionEnum<PrintSequence>* ps_opt = this->option<ConfigOptionEnum<PrintSequence>>("print_sequence");
ConfigOptionEnum<TimelapseType>* timelapse_opt = this->option<ConfigOptionEnum<TimelapseType>>("timelapse_type");
bool is_smooth_timelapse = timelapse_opt != nullptr && timelapse_opt->value == TimelapseType::tlSmooth;
if (!is_smooth_timelapse && (used_filaments == 1 || (ps_opt->value == PrintSequence::ByObject && num_objects > 1))) {
if (ept_opt->value) {
ept_opt->value = false;
changed_keys.push_back("enable_prime_tower");
}
//ept_opt->value = false;
}
if (ept_opt->value) {
if (islh_opt) {
if (islh_opt->value) {
islh_opt->value = false;
changed_keys.push_back("independent_support_layer_height");
}
//islh_opt->value = false;
}
//if (alh_opt) {
// if (alh_opt->value) {
// alh_opt->value = false;
// changed_keys.push_back("adaptive_layer_height");
// }
// //alh_opt->value = false;
//}
}
/* BBS：MusangKing - use "global->support->Independent support layer height" widget to replace previous assignment
else {
if (islh_opt) {
if (!islh_opt->value) {
islh_opt->value = true;
changed_keys.push_back("independent_support_layer_height");
}
//islh_opt->value = true;
}
}
*/
}
return changed_keys;
}
void handle_legacy_sla(DynamicPrintConfig &config)
{
for (std::string corr : {"relative_correction", "material_correction"}) {
if (config.has(corr)) {
if (std::string corr_x = corr + "_x"; !config.has(corr_x)) {
auto* opt = config.opt<ConfigOptionFloat>(corr_x, true);
opt->value = config.opt<ConfigOptionFloats>(corr)->values[0];
}
if (std::string corr_y = corr + "_y"; !config.has(corr_y)) {
auto* opt = config.opt<ConfigOptionFloat>(corr_y, true);
opt->value = config.opt<ConfigOptionFloats>(corr)->values[0];
}
if (std::string corr_z = corr + "_z"; !config.has(corr_z)) {
auto* opt = config.opt<ConfigOptionFloat>(corr_z, true);
opt->value = config.opt<ConfigOptionFloats>(corr)->values[1];
}
}
}
}
void DynamicPrintConfig::set_num_extruders(unsigned int num_extruders)
{
const auto &defaults = FullPrintConfig::defaults();
for (const std::string &key : print_config_def.extruder_option_keys()) {
if (key == "default_filament_profile")
// Don't resize this field, as it is presented to the user at the "Dependencies" page of the Printer profile and we don't want to present
// empty fields there, if not defined by the system profile.
continue;
auto *opt = this->option(key, false);
assert(opt != nullptr);
assert(opt->is_vector());
if (opt != nullptr && opt->is_vector())
static_cast<ConfigOptionVectorBase*>(opt)->resize(num_extruders, defaults.option(key));
}
}
// BBS
void DynamicPrintConfig::set_num_filaments(unsigned int num_filaments)
{
const auto& defaults = FullPrintConfig::defaults();
for (const std::string& key : print_config_def.filament_option_keys()) {
if (key == "default_filament_profile")
// Don't resize this field, as it is presented to the user at the "Dependencies" page of the Printer profile and we don't want to present
// empty fields there, if not defined by the system profile.
continue;
auto* opt = this->option(key, false);
assert(opt != nullptr);
assert(opt->is_vector());
if (opt != nullptr && opt->is_vector())
static_cast<ConfigOptionVectorBase*>(opt)->resize(num_filaments, defaults.option(key));
}
}
//BBS: pass map to recording all invalid valies
std::map<std::string, std::string> DynamicPrintConfig::validate(bool under_cli)
{
// Full print config is initialized from the defaults.
const ConfigOption *opt = this->option("printer_technology", false);
auto printer_technology = (opt == nullptr) ? ptFFF : static_cast<PrinterTechnology>(dynamic_cast<const ConfigOptionEnumGeneric*>(opt)->value);
switch (printer_technology) {
case ptFFF:
{
FullPrintConfig fpc;
fpc.apply(*this, true);
// Verify this print options through the FullPrintConfig.
return Slic3r::validate(fpc, under_cli);
}
default:
//FIXME no validation on SLA data?
return std::map<std::string, std::string>();
}
}
std::string DynamicPrintConfig::get_filament_type(std::string &displayed_filament_type, int id)
{
auto* filament_id = dynamic_cast<const ConfigOptionStrings*>(this->option("filament_id"));
auto* filament_type = dynamic_cast<const ConfigOptionStrings*>(this->option("filament_type"));
auto* filament_is_support = dynamic_cast<const ConfigOptionBools*>(this->option("filament_is_support"));
if (!filament_type)
return "";
if (!filament_is_support) {
if (filament_type) {
displayed_filament_type = filament_type->get_at(id);
return filament_type->get_at(id);
}
else {
displayed_filament_type = "";
return "";
}
}
else {
bool is_support = filament_is_support ? filament_is_support->get_at(id) : false;
if (is_support) {
if (filament_id) {
if (filament_id->get_at(id) == "GFS00") {
displayed_filament_type = "Sup.PLA";
return "PLA-S";
}
else if (filament_id->get_at(id) == "GFS01") {
displayed_filament_type = "Sup.PA";
return "PA-S";
}
else {
if (filament_type->get_at(id) == "PLA") {
displayed_filament_type = "Sup.PLA";
return "PLA-S";
}
else if (filament_type->get_at(id) == "PA") {
displayed_filament_type = "Sup.PA";
return "PA-S";
}
else {
displayed_filament_type = filament_type->get_at(id);
return filament_type->get_at(id);
}
}
}
else {
if (filament_type->get_at(id) == "PLA") {
displayed_filament_type = "Sup.PLA";
return "PLA-S";
} else if (filament_type->get_at(id) == "PA") {
displayed_filament_type = "Sup.PA";
return "PA-S";
} else {
displayed_filament_type = filament_type->get_at(id);
return filament_type->get_at(id);
}
}
}
else {
displayed_filament_type = filament_type->get_at(id);
return filament_type->get_at(id);
}
}
return "PLA";
}
bool DynamicPrintConfig::is_custom_defined()
{
auto* is_custom_defined = dynamic_cast<const ConfigOptionStrings*>(this->option("is_custom_defined"));
if (!is_custom_defined || is_custom_defined->empty())
return false;
if (is_custom_defined->get_at(0) == "1")
return true;
return false;
}
//BBS: pass map to recording all invalid valies
//FIXME localize this function.
std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool under_cli)
{
std::map<std::string, std::string> error_message;
// --layer-height
if (cfg.get_abs_value("layer_height") <= 0) {
error_message.emplace("layer_height", L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
}
else if (fabs(fmod(cfg.get_abs_value("layer_height"), SCALING_FACTOR)) > 1e-4) {
error_message.emplace("layer_height", L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
}
// --first-layer-height
if (cfg.initial_layer_print_height.value <= 0) {
error_message.emplace("initial_layer_print_height", L("invalid value ") + std::to_string(cfg.initial_layer_print_height.value));
}
// --filament-diameter
for (double fd : cfg.filament_diameter.values)
if (fd < 1) {
error_message.emplace("filament_diameter", L("invalid value ") + cfg.filament_diameter.serialize());
break;
}
// --nozzle-diameter
for (double nd : cfg.nozzle_diameter.values)
if (nd < 0.005) {
error_message.emplace("nozzle_diameter", L("invalid value ") + cfg.nozzle_diameter.serialize());
break;
}
// --perimeters
if (cfg.wall_loops.value < 0) {
error_message.emplace("wall_loops", L("invalid value ") + std::to_string(cfg.wall_loops.value));
}
// --solid-layers
if (cfg.top_shell_layers < 0) {
error_message.emplace("top_shell_layers", L("invalid value ") + std::to_string(cfg.top_shell_layers));
}
if (cfg.bottom_shell_layers < 0) {
error_message.emplace("bottom_shell_layers", L("invalid value ") + std::to_string(cfg.bottom_shell_layers));
}
if (cfg.use_firmware_retraction.value &&
cfg.gcode_flavor.value != gcfKlipper &&
cfg.gcode_flavor.value != gcfSmoothie &&
cfg.gcode_flavor.value != gcfRepRapSprinter &&
cfg.gcode_flavor.value != gcfRepRapFirmware &&
cfg.gcode_flavor.value != gcfMarlinLegacy &&
cfg.gcode_flavor.value != gcfMarlinFirmware &&
cfg.gcode_flavor.value != gcfMachinekit &&
cfg.gcode_flavor.value != gcfRepetier)
error_message.emplace("use_firmware_retraction","--use-firmware-retraction is only supported by Klipper, Marlin, Smoothie, RepRapFirmware, Repetier and Machinekit firmware");
if (cfg.use_firmware_retraction.value)
for (unsigned char wipe : cfg.wipe.values)
if (wipe)
error_message.emplace("use_firmware_retraction", "--use-firmware-retraction is not compatible with --wipe");
// --gcode-flavor
if (! print_config_def.get("gcode_flavor")->has_enum_value(cfg.gcode_flavor.serialize())) {
error_message.emplace("gcode_flavor", L("invalid value ") + cfg.gcode_flavor.serialize());
}
// --fill-pattern
if (! print_config_def.get("sparse_infill_pattern")->has_enum_value(cfg.sparse_infill_pattern.serialize())) {
error_message.emplace("sparse_infill_pattern", L("invalid value ") + cfg.sparse_infill_pattern.serialize());
}
// --top-fill-pattern
if (! print_config_def.get("top_surface_pattern")->has_enum_value(cfg.top_surface_pattern.serialize())) {
error_message.emplace("top_surface_pattern", L("invalid value ") + cfg.top_surface_pattern.serialize());
}
// --bottom-fill-pattern
if (! print_config_def.get("bottom_surface_pattern")->has_enum_value(cfg.bottom_surface_pattern.serialize())) {
error_message.emplace("bottom_surface_pattern", L("invalid value ") + cfg.bottom_surface_pattern.serialize());
}
// --soild-fill-pattern
if (!print_config_def.get("internal_solid_infill_pattern")->has_enum_value(cfg.internal_solid_infill_pattern.serialize())) {
error_message.emplace("internal_solid_infill_pattern", L("invalid value ") + cfg.internal_solid_infill_pattern.serialize());
}
// --skirt-height
if (cfg.skirt_height < 0) {
error_message.emplace("skirt_height", L("invalid value ") + std::to_string(cfg.skirt_height));
}
// --bridge-flow-ratio
if (cfg.bridge_flow <= 0) {
error_message.emplace("bridge_flow", L("invalid value ") + std::to_string(cfg.bridge_flow));
}
// --bridge-flow-ratio
if (cfg.bridge_flow <= 0) {
error_message.emplace("internal_bridge_flow", L("invalid value ") + std::to_string(cfg.internal_bridge_flow));
}
// extruder clearance
if (cfg.extruder_clearance_radius <= 0) {
error_message.emplace("extruder_clearance_radius", L("invalid value ") + std::to_string(cfg.extruder_clearance_radius));
}
if (cfg.extruder_clearance_height_to_rod <= 0) {
error_message.emplace("extruder_clearance_height_to_rod", L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_rod));
}
if (cfg.extruder_clearance_height_to_lid <= 0) {
error_message.emplace("extruder_clearance_height_to_lid", L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_lid));
}
// --extrusion-multiplier
for (double em : cfg.filament_flow_ratio.values)
if (em <= 0) {
error_message.emplace("filament_flow_ratio", L("invalid value ") + cfg.filament_flow_ratio.serialize());
break;
}
// --spiral-vase
//for non-cli case, we will popup dialog for spiral mode correction
if (cfg.spiral_mode && under_cli) {
// Note that we might want to have more than one perimeter on the bottom
// solid layers.
if (cfg.wall_loops != 1) {
error_message.emplace("wall_loops", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.wall_loops));
//return "Can't make more than one perimeter when spiral vase mode is enabled";
//return "Can't make less than one perimeter when spiral vase mode is enabled";
}
if (cfg.sparse_infill_density > 0) {
error_message.emplace("sparse_infill_density", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.sparse_infill_density));
//return "Spiral vase mode can only print hollow objects, so you need to set Fill density to 0";
}
if (cfg.top_shell_layers > 0) {
error_message.emplace("top_shell_layers", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.top_shell_layers));
//return "Spiral vase mode is not compatible with top solid layers";
}
if (cfg.enable_support ) {
error_message.emplace("enable_support", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enable_support));
//return "Spiral vase mode is not compatible with support";
}
if (cfg.enforce_support_layers > 0) {
error_message.emplace("enforce_support_layers", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enforce_support_layers));
//return "Spiral vase mode is not compatible with support";
}
}
// extrusion widths
{
double max_nozzle_diameter = 0.;
for (double dmr : cfg.nozzle_diameter.values)
max_nozzle_diameter = std::max(max_nozzle_diameter, dmr);
const char *widths[] = {
"outer_wall_line_width",
"inner_wall_line_width",
"sparse_infill_line_width",
"internal_solid_infill_line_width",
"top_surface_line_width",
"support_line_width",
"initial_layer_line_width" };
for (size_t i = 0; i < sizeof(widths) / sizeof(widths[i]); ++ i) {
std::string key(widths[i]);
if (cfg.get_abs_value(key, max_nozzle_diameter) > 2.5 * max_nozzle_diameter) {
error_message.emplace(key, L("too large line width ") + std::to_string(cfg.get_abs_value(key)));
//return std::string("Too Large line width: ") + key;
}
}
}
// Out of range validation of numeric values.
for (const std::string &opt_key : cfg.keys()) {
const ConfigOption *opt = cfg.optptr(opt_key);
assert(opt != nullptr);
const ConfigOptionDef *optdef = print_config_def.get(opt_key);
assert(optdef != nullptr);
bool out_of_range = false;
switch (opt->type()) {
case coFloat:
case coPercent:
case coFloatOrPercent:
{
auto *fopt = static_cast<const ConfigOptionFloat*>(opt);
out_of_range = fopt->value < optdef->min || fopt->value > optdef->max;
break;
}
case coFloats:
case coPercents:
for (double v : static_cast<const ConfigOptionVector<double>*>(opt)->values)
if (v < optdef->min || v > optdef->max) {
out_of_range = true;
break;
}
break;
case coInt:
{
auto *iopt = static_cast<const ConfigOptionInt*>(opt);
out_of_range = iopt->value < optdef->min || iopt->value > optdef->max;
break;
}
case coInts:
for (int v : static_cast<const ConfigOptionVector<int>*>(opt)->values)
if (v < optdef->min || v > optdef->max) {
out_of_range = true;
break;
}
break;
default:;
}
if (out_of_range) {
if (error_message.find(opt_key) == error_message.end())
error_message.emplace(opt_key, opt->serialize() + L(" not in range ") +"[" + std::to_string(optdef->min) + "," + std::to_string(optdef->max) + "]");
//return std::string("Value out of range: " + opt_key);
}
}
// The configuration is valid.
return error_message;
}
// Declare and initialize static caches of StaticPrintConfig derived classes.
#define PRINT_CONFIG_CACHE_ELEMENT_DEFINITION(r, data, CLASS_NAME) StaticPrintConfig::StaticCache<class Slic3r::CLASS_NAME> BOOST_PP_CAT(CLASS_NAME::s_cache_, CLASS_NAME);
#define PRINT_CONFIG_CACHE_ELEMENT_INITIALIZATION(r, data, CLASS_NAME) Slic3r::CLASS_NAME::initialize_cache();
#define PRINT_CONFIG_CACHE_INITIALIZE(CLASSES_SEQ) \
BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CACHE_ELEMENT_DEFINITION, _, BOOST_PP_TUPLE_TO_SEQ(CLASSES_SEQ)) \
int print_config_static_initializer() { \
/* Putting a trace here to avoid the compiler to optimize out this function. */ \
BOOST_LOG_TRIVIAL(trace) << "Initializing StaticPrintConfigs"; \
BOOST_PP_SEQ_FOR_EACH(PRINT_CONFIG_CACHE_ELEMENT_INITIALIZATION, _, BOOST_PP_TUPLE_TO_SEQ(CLASSES_SEQ)) \
return 1; \
}
PRINT_CONFIG_CACHE_INITIALIZE((
PrintObjectConfig, PrintRegionConfig, MachineEnvelopeConfig, GCodeConfig, PrintConfig, FullPrintConfig,
SLAMaterialConfig, SLAPrintConfig, SLAPrintObjectConfig, SLAPrinterConfig, SLAFullPrintConfig))
static int print_config_static_initialized = print_config_static_initializer();
//BBS: remove unused command currently
CLIActionsConfigDef::CLIActionsConfigDef()
{
ConfigOptionDef* def;
// Actions:
/*def = this->add("export_obj", coBool);
def->label = L("Export OBJ");
def->tooltip = L("Export the model(s) as OBJ.");
def->set_default_value(new ConfigOptionBool(false));*/
/*
def = this->add("export_svg", coBool);
def->label = L("Export SVG");
def->tooltip = L("Slice the model and export solid slices as SVG.");
def->set_default_value(new ConfigOptionBool(false));
*/
/*def = this->add("export_sla", coBool);
def->label = L("Export SLA");
def->tooltip = L("Slice the model and export SLA printing layers as PNG.");
def->cli = "export-sla|sla";
def->set_default_value(new ConfigOptionBool(false));*/
def = this->add("export_3mf", coString);
def->label = "Export 3MF";
def->tooltip = "Export project as 3MF.";
def->cli_params = "filename.3mf";
def->set_default_value(new ConfigOptionString("output.3mf"));
def = this->add("export_slicedata", coString);
def->label = "Export slicing data";
def->tooltip = "Export slicing data to a folder.";
def->cli_params = "slicing_data_directory";
def->set_default_value(new ConfigOptionString("cached_data"));
def = this->add("load_slicedata", coStrings);
def->label = "Load slicing data";
def->tooltip = "Load cached slicing data from directory";
def->cli_params = "slicing_data_directory";
def->set_default_value(new ConfigOptionString("cached_data"));
/*def = this->add("export_amf", coBool);
def->label = L("Export AMF");
def->tooltip = L("Export the model(s) as AMF.");
def->set_default_value(new ConfigOptionBool(false));*/
def = this->add("export_stl", coBool);
def->label = "Export STL";
def->tooltip = "Export the objects as multiple STL.";
def->set_default_value(new ConfigOptionBool(false));
/*def = this->add("export_gcode", coBool);
def->label = L("Export G-code");
def->tooltip = L("Slice the model and export toolpaths as G-code.");
def->cli = "export-gcode|gcode|g";
def->set_default_value(new ConfigOptionBool(false));*/
/*def = this->add("gcodeviewer", coBool);
// BBS: remove _L()
def->label = ("G-code viewer");
def->tooltip = ("Visualize an already sliced and saved G-code");
def->cli = "gcodeviewer";
def->set_default_value(new ConfigOptionBool(false));*/
def = this->add("slice", coInt);
def->label = "Slice";
def->tooltip = "Slice the plates: 0-all plates, i-plate i, others-invalid";
def->cli = "slice";
def->cli_params = "option";
def->set_default_value(new ConfigOptionInt(0));
def = this->add("help", coBool);
def->label = "Help";
def->tooltip = "Show command help.";
def->cli = "help|h";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("uptodate", coBool);
def->label = "UpToDate";
def->tooltip = "Update the configs values of 3mf to latest.";
def->cli = "uptodate";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("load_defaultfila", coBool);
def->label = "Load default filaments";
def->tooltip = "Load first filament as default for those not loaded";
def->cli_params = "option";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("min_save", coBool);
def->label = "Minimum save";
def->tooltip = "export 3mf with minimum size.";
def->cli_params = "option";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("min_save", coBool);
def->label = L("Minimum save");
def->tooltip = L("export 3mf with minimum size.");
def->cli_params = "option";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("mtcpp", coInt);
def->label = "mtcpp";
def->tooltip = "max triangle count per plate for slicing.";
def->cli = "mtcpp";
def->cli_params = "count";
def->set_default_value(new ConfigOptionInt(1000000));
def = this->add("mstpp", coInt);
def->label = "mstpp";
def->tooltip = "max slicing time per plate in seconds.";
def->cli = "mstpp";
def->cli_params = "time";
def->set_default_value(new ConfigOptionInt(300));
// must define new params here, otherwise comamnd param check will fail
def = this->add("no_check", coBool);
def->label = L("No check");
def->tooltip = L("Do not run any validity checks, such as gcode path conflicts check.");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("normative_check", coBool);
def->label = "Normative check";
def->tooltip = "Check the normative items.";
def->cli_params = "option";
def->set_default_value(new ConfigOptionBool(true));
/*def = this->add("help_fff", coBool);
def->label = L("Help (FFF options)");
def->tooltip = L("Show the full list of print/G-code configuration options.");
def->set_default_value(new ConfigOptionBool(false));
def = this->add("help_sla", coBool);
def->label = L("Help (SLA options)");
def->tooltip = L("Show the full list of SLA print configuration options.");
def->set_default_value(new ConfigOptionBool(false));*/
def = this->add("info", coBool);
def->label = "Output Model Info";
def->tooltip = "Output the model's information.";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("export_settings", coString);
def->label = "Export Settings";
def->tooltip = "Export settings to a file.";
def->cli_params = "settings.json";
def->set_default_value(new ConfigOptionString("output.json"));
def = this->add("pipe", coString);
def->label = "Send progress to pipe";
def->tooltip = "Send progress to pipe.";
def->cli_params = "pipename";
def->set_default_value(new ConfigOptionString(""));
}
//BBS: remove unused command currently
CLITransformConfigDef::CLITransformConfigDef()
{
ConfigOptionDef* def;
// Transform options:
/*def = this->add("align_xy", coPoint);
def->label = L("Align XY");
def->tooltip = L("Align the model to the given point.");
def->set_default_value(new ConfigOptionPoint(Vec2d(100,100)));
def = this->add("cut", coFloat);
def->label = L("Cut");
def->tooltip = L("Cut model at the given Z.");
def->set_default_value(new ConfigOptionFloat(0));*/
/*
def = this->add("cut_grid", coFloat);
def->label = L("Cut");
def->tooltip = L("Cut model in the XY plane into tiles of the specified max size.");
def->set_default_value(new ConfigOptionPoint());
def = this->add("cut_x", coFloat);
def->label = L("Cut");
def->tooltip = L("Cut model at the given X.");
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("cut_y", coFloat);
def->label = L("Cut");
def->tooltip = L("Cut model at the given Y.");
def->set_default_value(new ConfigOptionFloat(0));
*/
/*def = this->add("center", coPoint);
def->label = L("Center");
def->tooltip = L("Center the print around the given center.");
def->set_default_value(new ConfigOptionPoint(Vec2d(100,100)));*/
def = this->add("arrange", coInt);
def->label = "Arrange Options";
def->tooltip = "Arrange options: 0-disable, 1-enable, others-auto";
def->cli_params = "option";
//def->cli = "arrange|a";
def->set_default_value(new ConfigOptionInt(0));
def = this->add("repetitions", coInt);
def->label = "Repetions count";
def->tooltip = "Repetions count of the whole model";
def->cli_params = "count";
def->set_default_value(new ConfigOptionInt(1));
def = this->add("ensure_on_bed", coBool);
def->label = L("Ensure on bed");
def->tooltip = L("Lift the object above the bed when it is partially below. Disabled by default");
def->set_default_value(new ConfigOptionBool(false));
/*def = this->add("copy", coInt);
def->label = L("Copy");
def->tooltip =L("Duplicate copies of model");
def->min = 1;
def->set_default_value(new ConfigOptionInt(1));*/
/*def = this->add("duplicate_grid", coPoint);
def->label = L("Duplicate by grid");
def->tooltip = L("Multiply copies by creating a grid.");*/
def = this->add("assemble", coBool);
def->label = "Assemble";
def->tooltip = "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once.";
//def->cli = "merge|m";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("convert_unit", coBool);
def->label = "Convert Unit";
def->tooltip = "Convert the units of model";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("orient", coInt);
def->label = L("Orient Options");
def->tooltip = L("Orient options: 0-disable, 1-enable, others-auto");
//def->cli = "orient|o";
def->set_default_value(new ConfigOptionInt(0));
/*def = this->add("repair", coBool);
def->label = L("Repair");
def->tooltip = L("Repair the model's meshes if it is non-manifold mesh");
def->set_default_value(new ConfigOptionBool(false));*/
def = this->add("rotate", coFloat);
def->label = L("Rotate");
def->tooltip = L("Rotation angle around the Z axis in degrees.");
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("rotate_x", coFloat);
def->label = "Rotate around X";
def->tooltip = "Rotation angle around the X axis in degrees.";
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("rotate_y", coFloat);
def->label = L("Rotate around Y");
def->tooltip = L("Rotation angle around the Y axis in degrees.");
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("scale", coFloat);
def->label = "Scale";
def->tooltip = "Scale the model by a float factor";
def->cli_params = "factor";
def->set_default_value(new ConfigOptionFloat(1.f));
/*def = this->add("split", coBool);
def->label = L("Split");
def->tooltip = L("Detect unconnected parts in the given model(s) and split them into separate objects.");
def = this->add("scale_to_fit", coPoint3);
def->label = L("Scale to Fit");
def->tooltip = L("Scale to fit the given volume.");
def->set_default_value(new ConfigOptionPoint3(Vec3d(0,0,0)));*/
}
CLIMiscConfigDef::CLIMiscConfigDef()
{
ConfigOptionDef* def;
/*def = this->add("ignore_nonexistent_config", coBool);
def->label = L("Ignore non-existent config files");
def->tooltip = L("Do not fail if a file supplied to --load does not exist.");
def = this->add("config_compatibility", coEnum);
def->label = L("Forward-compatibility rule when loading configurations from config files and project files (3MF, AMF).");
def->tooltip = L("This version of OrcaSlicer may not understand configurations produced by the newest OrcaSlicer versions. "
"For example, newer OrcaSlicer may extend the list of supported firmware flavors. One may decide to "
"bail out or to substitute an unknown value with a default silently or verbosely.");
def->enum_keys_map = &ConfigOptionEnum<ForwardCompatibilitySubstitutionRule>::get_enum_values();
def->enum_values.push_back("disable");
def->enum_values.push_back("enable");
def->enum_values.push_back("enable_silent");
def->enum_labels.push_back(L("Bail out on unknown configuration values"));
def->enum_labels.push_back(L("Enable reading unknown configuration values by verbosely substituting them with defaults."));
def->enum_labels.push_back(L("Enable reading unknown configuration values by silently substituting them with defaults."));
def->set_default_value(new ConfigOptionEnum<ForwardCompatibilitySubstitutionRule>(ForwardCompatibilitySubstitutionRule::Enable));*/
/*def = this->add("load", coStrings);
def->label = L("Load config file");
def->tooltip = L("Load configuration from the specified file. It can be used more than once to load options from multiple files.");*/
def = this->add("load_settings", coStrings);
def->label = "Load General Settings";
def->tooltip = "Load process/machine settings from the specified file";
def->cli_params = "\"setting1.json;setting2.json\"";
def->set_default_value(new ConfigOptionStrings());
def = this->add("load_filaments", coStrings);
def->label = "Load Filament Settings";
def->tooltip = "Load filament settings from the specified file list";
def->cli_params = "\"filament1.json;filament2.json;...\"";
def->set_default_value(new ConfigOptionStrings());
def = this->add("skip_objects", coInts);
def->label = "Skip Objects";
def->tooltip = "Skip some objects in this print";
def->cli_params = "\"3,5,10,77\"";
def->set_default_value(new ConfigOptionInts());
def = this->add("clone_objects", coInts);
def->label = "Clone Objects";
def->tooltip = "Clone objects in the load list";
def->cli_params = "\"1,3,1,10\"";
def->set_default_value(new ConfigOptionInts());
def = this->add("uptodate_settings", coStrings);
def->label = "load uptodate process/machine settings when using uptodate";
def->tooltip = "load uptodate process/machine settings from the specified file when using uptodate";
def->cli_params = "\"setting1.json;setting2.json\"";
def->set_default_value(new ConfigOptionStrings());
def = this->add("uptodate_filaments", coStrings);
def->label = "load uptodate filament settings when using uptodate";
def->tooltip = "load uptodate filament settings from the specified file when using uptodate";
def->cli_params = "\"filament1.json;filament2.json;...\"";
def->set_default_value(new ConfigOptionStrings());
def = this->add("load_assemble_list", coString);
def->label = "Load assemble list";
def->tooltip = "Load assemble object list from config file";
def->cli_params = "assemble_list.json";
def->set_default_value(new ConfigOptionString());
/*def = this->add("output", coString);
def->label = L("Output File");
def->tooltip = L("The file where the output will be written (if not specified, it will be based on the input file).");
def->cli = "output|o";
def = this->add("single_instance", coBool);
def->label = L("Single instance mode");
def->tooltip = L("If enabled, the command line arguments are sent to an existing instance of GUI OrcaSlicer, "
"or an existing OrcaSlicer window is activated. "
"Overrides the \"single_instance\" configuration value from application preferences.");*/
/*
def = this->add("autosave", coString);
def->label = L("Autosave");
def->tooltip = L("Automatically export current configuration to the specified file.");
*/
def = this->add("datadir", coString);
def->label = L("Data directory");
def->tooltip = L("Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage.");
def = this->add("outputdir", coString);
def->label = "Output directory";
def->tooltip = "Output directory for the exported files.";
def->cli_params = "dir";
def->set_default_value(new ConfigOptionString());
def = this->add("debug", coInt);
def->label = "Debug level";
def->tooltip = "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n";
def->min = 0;
def->cli_params = "level";
def->set_default_value(new ConfigOptionInt(1));
def = this->add("enable_timelapse", coBool);
def->label = "Enable timeplapse for print";
def->tooltip = "If enabled, this slicing will be considered using timelapse";
def->set_default_value(new ConfigOptionBool(false));
#if (defined(_MSC_VER) || defined(__MINGW32__)) && defined(SLIC3R_GUI)
/*def = this->add("sw_renderer", coBool);
def->label = L("Render with a software renderer");
def->tooltip = L("Render with a software renderer. The bundled MESA software renderer is loaded instead of the default OpenGL driver.");
def->min = 0;*/
#endif /* _MSC_VER */
def = this->add("load_custom_gcodes", coString);
def->label = L("Load custom gcode");
def->tooltip = L("Load custom gcode from json");
def->cli_params = "custom_gcode_toolchange.json";
def->set_default_value(new ConfigOptionString());
def = this->add("load_filament_ids", coInts);
def->label = "Load filament ids";
def->tooltip = "Load filament ids for each object";
def->cli_params = "\"1,2,3,1\"";
def->set_default_value(new ConfigOptionInts());
def = this->add("allow_multicolor_oneplate", coBool);
def->label = "Allow multiple color on one plate";
def->tooltip = "If enabled, the arrange will allow multiple color on one plate";
def->set_default_value(new ConfigOptionBool(true));
def = this->add("allow_rotations", coBool);
def->label = "Allow rotatations when arrange";
def->tooltip = "If enabled, the arrange will allow rotations when place object";
def->set_default_value(new ConfigOptionBool(true));
def = this->add("avoid_extrusion_cali_region", coBool);
def->label = "Avoid extrusion calibrate region when doing arrange";
def->tooltip = "If enabled, the arrange will avoid extrusion calibrate region when place object";
def->set_default_value(new ConfigOptionBool(false));
def = this->add("skip_modified_gcodes", coBool);
def->label = "Skip modified gcodes in 3mf";
def->tooltip = "Skip the modified gcodes in 3mf from Printer or filament Presets";
def->cli_params = "option";
def->set_default_value(new ConfigOptionBool(false));
}
const CLIActionsConfigDef cli_actions_config_def;
const CLITransformConfigDef cli_transform_config_def;
const CLIMiscConfigDef cli_misc_config_def;
DynamicPrintAndCLIConfig::PrintAndCLIConfigDef DynamicPrintAndCLIConfig::s_def;
void DynamicPrintAndCLIConfig::handle_legacy(t_config_option_key &opt_key, std::string &value) const
{
if (cli_actions_config_def .options.find(opt_key) == cli_actions_config_def .options.end() &&
cli_transform_config_def.options.find(opt_key) == cli_transform_config_def.options.end() &&
cli_misc_config_def .options.find(opt_key) == cli_misc_config_def .options.end()) {
PrintConfigDef::handle_legacy(opt_key, value);
}
}
uint64_t ModelConfig::s_last_timestamp = 1;
static Points to_points(const std::vector<Vec2d> &dpts)
{
Points pts; pts.reserve(dpts.size());
for (auto &v : dpts)
pts.emplace_back( coord_t(scale_(v.x())), coord_t(scale_(v.y())) );
return pts;
}
Points get_bed_shape(const DynamicPrintConfig &config)
{
const auto *bed_shape_opt = config.opt<ConfigOptionPoints>("printable_area");
if (!bed_shape_opt) {
// Here, it is certain that the bed shape is missing, so an infinite one
// has to be used, but still, the center of bed can be queried
if (auto center_opt = config.opt<ConfigOptionPoint>("center"))
return { scaled(center_opt->value) };
return {};
}
return to_points(bed_shape_opt->values);
}
Points get_bed_shape(const PrintConfig &cfg)
{
return to_points(cfg.printable_area.values);
}
Points get_bed_shape(const SLAPrinterConfig &cfg) { return to_points(cfg.printable_area.values); }
Polygon get_bed_shape_with_excluded_area(const PrintConfig& cfg)
{
Polygon bed_poly;
bed_poly.points = get_bed_shape(cfg);
Points excluse_area_points = to_points(cfg.bed_exclude_area.values);
Polygons exclude_polys;
Polygon exclude_poly;
for (int i = 0; i < excluse_area_points.size(); i++) {
auto pt = excluse_area_points[i];
exclude_poly.points.emplace_back(pt);
if (i % 4 == 3) { // exclude areas are always rectangle
exclude_polys.push_back(exclude_poly);
exclude_poly.points.clear();
}
}
auto tmp = diff({ bed_poly }, exclude_polys);
if (!tmp.empty()) bed_poly = tmp[0];
return bed_poly;
}
bool has_skirt(const DynamicPrintConfig& cfg)
{
auto opt_skirt_height = cfg.option("skirt_height");
auto opt_skirt_loops = cfg.option("skirt_loops");
auto opt_draft_shield = cfg.option("draft_shield");
return (opt_skirt_height && opt_skirt_height->getInt() > 0 && opt_skirt_loops && opt_skirt_loops->getInt() > 0)
|| (opt_draft_shield && opt_draft_shield->getInt() != dsDisabled);
}
float get_real_skirt_dist(const DynamicPrintConfig& cfg) {
return has_skirt(cfg) ? cfg.opt_float("skirt_distance") : 0;
}
} // namespace Slic3r
#include <cereal/types/polymorphic.hpp>
CEREAL_REGISTER_TYPE(Slic3r::DynamicPrintConfig)
CEREAL_REGISTER_POLYMORPHIC_RELATION(Slic3r::DynamicConfig, Slic3r::DynamicPrintConfig)
Reference in a new issue View git blame Copy permalink