3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-25 15:44:12 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3
OrcaSlicer/src/slic3r/GUI/PrintHostDialogs.cpp
wujie 00a3e78f8a
Add elegoo centauri carbon profile (#8405) 
* Added Elegoolink connection

* Set Elegoo CC default bed to btPTE

* Friendly output of some error codes of PrintHost

* feat: Add elegoo centauri carbon profile

* fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported.

* feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters.

* feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type.

* fix: Optimize ElegooLink upload; The code is clearer than before.

* feat: Format the ElegooPrintHostSendDialog code.

* fix: Remove the unnecessary instantiation attribute in the Elegoo process.

* fix: Flatpak compilation failed

---------

Co-authored-by: anjis <anjis.zhou@elegoo.com>
2025-02-18 23:08:34 +08:00

955 lines
39 KiB
C++
Raw Blame History

#include "PrintHostDialogs.hpp"
#include <algorithm>
#include <iomanip>
#include <wx/frame.h>
#include <wx/progdlg.h>
#include <wx/sizer.h>
#include <wx/stattext.h>
#include <wx/textctrl.h>
#include <wx/checkbox.h>
#include <wx/button.h>
#include <wx/dataview.h>
#include <wx/wupdlock.h>
#include <wx/debug.h>
#include <wx/msgdlg.h>
#include <boost/log/trivial.hpp>
#include <boost/filesystem.hpp>
#include <boost/nowide/convert.hpp>
#include "GUI.hpp"
#include "GUI_App.hpp"
#include "MsgDialog.hpp"
#include "I18N.hpp"
#include "MainFrame.hpp"
#include "libslic3r/AppConfig.hpp"
#include "NotificationManager.hpp"
#include "ExtraRenderers.hpp"
#include "format.hpp"
namespace fs = boost::filesystem;
namespace Slic3r {
namespace GUI {
static const char *CONFIG_KEY_PATH = "printhost_path";
static const char *CONFIG_KEY_GROUP = "printhost_group";
static const char* CONFIG_KEY_STORAGE = "printhost_storage";
PrintHostSendDialog::PrintHostSendDialog(const fs::path &path, PrintHostPostUploadActions post_actions, const wxArrayString &groups, const wxArrayString& storage_paths, const wxArrayString& storage_names, bool switch_to_device_tab)
: MsgDialog(static_cast<wxWindow*>(wxGetApp().mainframe), _L("Send G-Code to printer host"), _L("Upload to Printer Host with the following filename:"), 0) // Set style = 0 to avoid default creation of the "OK" button.
// All buttons will be added later in this constructor
, txt_filename(new wxTextCtrl(this, wxID_ANY))
, combo_groups(!groups.IsEmpty() ? new wxComboBox(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, groups, wxCB_READONLY) : nullptr)
, combo_storage(storage_names.GetCount() > 1 ? new wxComboBox(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, storage_names, wxCB_READONLY) : nullptr)
, post_upload_action(PrintHostPostUploadAction::None)
, m_paths(storage_paths)
, m_switch_to_device_tab(switch_to_device_tab)
, m_path(path)
, m_post_actions(post_actions)
, m_storage_names(storage_names)
{
#ifdef __APPLE__
txt_filename->OSXDisableAllSmartSubstitutions();
#endif
}
void PrintHostSendDialog::init()
{
const auto& path = m_path;
const auto& storage_paths = m_paths;
const auto& post_actions = m_post_actions;
const auto& storage_names = m_storage_names;
const AppConfig* app_config = wxGetApp().app_config;
auto *label_dir_hint = new wxStaticText(this, wxID_ANY, _L("Use forward slashes ( / ) as a directory separator if needed."));
label_dir_hint->Wrap(CONTENT_WIDTH * wxGetApp().em_unit());
content_sizer->Add(txt_filename, 0, wxEXPAND);
content_sizer->Add(label_dir_hint);
content_sizer->AddSpacer(VERT_SPACING);
if (combo_groups != nullptr) {
// Repetier specific: Show a selection of file groups.
auto *label_group = new wxStaticText(this, wxID_ANY, _L("Group"));
content_sizer->Add(label_group);
content_sizer->Add(combo_groups, 0, wxBOTTOM, 2*VERT_SPACING);
wxString recent_group = from_u8(app_config->get("recent", CONFIG_KEY_GROUP));
if (! recent_group.empty())
combo_groups->SetValue(recent_group);
}
if (combo_storage != nullptr) {
// PrusaLink specific: User needs to choose a storage
auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ":");
content_sizer->Add(label_group);
content_sizer->Add(combo_storage, 0, wxBOTTOM, 2 * VERT_SPACING);
combo_storage->SetValue(storage_names.front());
wxString recent_storage = from_u8(app_config->get("recent", CONFIG_KEY_STORAGE));
if (!recent_storage.empty())
combo_storage->SetValue(recent_storage);
} else if (storage_names.GetCount() == 1){
// PrusaLink specific: Show which storage has been detected.
auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ": " + storage_names.front());
content_sizer->Add(label_group);
m_preselected_storage = storage_paths.front();
}
wxString recent_path = from_u8(app_config->get("recent", CONFIG_KEY_PATH));
if (recent_path.Length() > 0 && recent_path[recent_path.Length() - 1] != '/') {
recent_path += '/';
}
const auto recent_path_len = recent_path.Length();
recent_path += path.filename().wstring();
wxString stem(path.stem().wstring());
const auto stem_len = stem.Length();
txt_filename->SetValue(recent_path);
auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
auto checkbox = new ::CheckBox(this, wxID_APPLY);
checkbox->SetValue(m_switch_to_device_tab);
checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
m_switch_to_device_tab = e.IsChecked();
e.Skip();
});
checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Switch to Device tab after upload."), wxDefaultPosition, wxDefaultSize, 0);
checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
content_sizer->Add(checkbox_sizer);
content_sizer->AddSpacer(VERT_SPACING);
if (size_t extension_start = recent_path.find_last_of('.'); extension_start != std::string::npos)
m_valid_suffix = recent_path.substr(extension_start);
// .gcode suffix control
auto validate_path = [this](const wxString &path) -> bool {
if (! path.Lower().EndsWith(m_valid_suffix.Lower())) {
MessageDialog msg_wingow(this, wxString::Format(_L("Upload filename doesn't end with \"%s\". Do you wish to continue?"), m_valid_suffix), wxString(SLIC3R_APP_NAME), wxYES | wxNO);
if (msg_wingow.ShowModal() == wxID_NO)
return false;
}
return true;
};
auto* btn_ok = add_button(wxID_OK, true, _L("Upload"));
btn_ok->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
if (validate_path(txt_filename->GetValue())) {
post_upload_action = PrintHostPostUploadAction::None;
EndDialog(wxID_OK);
}
});
txt_filename->SetFocus();
// if (post_actions.has(PrintHostPostUploadAction::QueuePrint)) {
// auto* btn_print = add_button(wxID_ADD, false, _L("Upload to Queue"));
// btn_print->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
// if (validate_path(txt_filename->GetValue())) {
// post_upload_action = PrintHostPostUploadAction::QueuePrint;
// EndDialog(wxID_OK);
// }
// });
// }
if (post_actions.has(PrintHostPostUploadAction::StartPrint)) {
auto* btn_print = add_button(wxID_YES, false, _L("Upload and Print"));
btn_print->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
if (validate_path(txt_filename->GetValue())) {
post_upload_action = PrintHostPostUploadAction::StartPrint;
EndDialog(wxID_OK);
}
});
}
// if (post_actions.has(PrintHostPostUploadAction::StartSimulation)) {
// // Using wxID_MORE as a button identifier to be different from the other buttons, wxID_MORE has no other meaning here.
// auto* btn_simulate = add_button(wxID_MORE, false, _L("Upload and Simulate"));
// btn_simulate->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
// if (validate_path(txt_filename->GetValue())) {
// post_upload_action = PrintHostPostUploadAction::StartSimulation;
// EndDialog(wxID_OK);
// }
// });
// }
add_button(wxID_CANCEL,false, L("Cancel"));
finalize();
#ifdef __linux__
// On Linux with GTK2 when text control lose the focus then selection (colored background) disappears but text color stay white
// and as a result the text is invisible with light mode
// see https://github.com/prusa3d/PrusaSlicer/issues/4532
// Workaround: Unselect text selection explicitly on kill focus
txt_filename->Bind(wxEVT_KILL_FOCUS, [this](wxEvent& e) {
e.Skip();
txt_filename->SetInsertionPoint(txt_filename->GetLastPosition());
}, txt_filename->GetId());
#endif /* __linux__ */
Bind(wxEVT_SHOW, [=](const wxShowEvent &) {
// Another similar case where the function only works with EVT_SHOW + CallAfter,
// this time on Mac.
CallAfter([=]() {
txt_filename->SetInsertionPoint(0);
txt_filename->SetSelection(recent_path_len, recent_path_len + stem_len);
});
});
}
fs::path PrintHostSendDialog::filename() const
{
return into_path(txt_filename->GetValue());
}
PrintHostPostUploadAction PrintHostSendDialog::post_action() const
{
return post_upload_action;
}
std::string PrintHostSendDialog::group() const
{
if (combo_groups == nullptr) {
return "";
} else {
wxString group = combo_groups->GetValue();
return into_u8(group);
}
}
std::string PrintHostSendDialog::storage() const
{
if (!combo_storage)
return GUI::format("%1%", m_preselected_storage);
if (combo_storage->GetSelection() < 0 || combo_storage->GetSelection() >= int(m_paths.size()))
return {};
return boost::nowide::narrow(m_paths[combo_storage->GetSelection()]);
}
void PrintHostSendDialog::EndModal(int ret)
{
if (ret == wxID_OK) {
// Persist path and print settings
wxString path = txt_filename->GetValue();
int last_slash = path.Find('/', true);
if (last_slash == wxNOT_FOUND)
path.clear();
else
path = path.SubString(0, last_slash);
AppConfig *app_config = wxGetApp().app_config;
app_config->set("recent", CONFIG_KEY_PATH, into_u8(path));
if (combo_groups != nullptr) {
wxString group = combo_groups->GetValue();
app_config->set("recent", CONFIG_KEY_GROUP, into_u8(group));
}
if (combo_storage != nullptr) {
wxString storage = combo_storage->GetValue();
app_config->set("recent", CONFIG_KEY_STORAGE, into_u8(storage));
}
}
MsgDialog::EndModal(ret);
}
wxDEFINE_EVENT(EVT_PRINTHOST_PROGRESS, PrintHostQueueDialog::Event);
wxDEFINE_EVENT(EVT_PRINTHOST_ERROR, PrintHostQueueDialog::Event);
wxDEFINE_EVENT(EVT_PRINTHOST_CANCEL, PrintHostQueueDialog::Event);
wxDEFINE_EVENT(EVT_PRINTHOST_INFO, PrintHostQueueDialog::Event);
PrintHostQueueDialog::Event::Event(wxEventType eventType, int winid, size_t job_id)
: wxEvent(winid, eventType)
, job_id(job_id)
{}
PrintHostQueueDialog::Event::Event(wxEventType eventType, int winid, size_t job_id, int progress)
: wxEvent(winid, eventType)
, job_id(job_id)
, progress(progress)
{}
PrintHostQueueDialog::Event::Event(wxEventType eventType, int winid, size_t job_id, wxString error)
: wxEvent(winid, eventType)
, job_id(job_id)
, status(std::move(error))
{}
PrintHostQueueDialog::Event::Event(wxEventType eventType, int winid, size_t job_id, wxString tag, wxString status)
: wxEvent(winid, eventType)
, job_id(job_id)
, tag(std::move(tag))
, status(std::move(status))
{}
wxEvent *PrintHostQueueDialog::Event::Clone() const
{
return new Event(*this);
}
PrintHostQueueDialog::PrintHostQueueDialog(wxWindow *parent)
: DPIDialog(parent, wxID_ANY, _L("Print host upload queue"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
, on_progress_evt(this, EVT_PRINTHOST_PROGRESS, &PrintHostQueueDialog::on_progress, this)
, on_error_evt(this, EVT_PRINTHOST_ERROR, &PrintHostQueueDialog::on_error, this)
, on_cancel_evt(this, EVT_PRINTHOST_CANCEL, &PrintHostQueueDialog::on_cancel, this)
, on_info_evt(this, EVT_PRINTHOST_INFO, &PrintHostQueueDialog::on_info, this)
{
const auto em = GetTextExtent("m").x;
auto *topsizer = new wxBoxSizer(wxVERTICAL);
std::vector<int> widths;
widths.reserve(7);
if (!load_user_data(UDT_COLS, widths)) {
widths.clear();
for (size_t i = 0; i < 7; i++)
widths.push_back(-1);
}
job_list = new wxDataViewListCtrl(this, wxID_ANY);
// MSW DarkMode: workaround for the selected item in the list
auto append_text_column = [this](const wxString& label, int width, wxAlignment align = wxALIGN_LEFT,
int flags = wxDATAVIEW_COL_RESIZABLE | wxDATAVIEW_COL_SORTABLE) {
#ifdef _WIN32
job_list->AppendColumn(new wxDataViewColumn(label, new TextRenderer(), job_list->GetColumnCount(), width, align, flags));
#else
job_list->AppendTextColumn(label, wxDATAVIEW_CELL_INERT, width, align, flags);
#endif
};
// Note: Keep these in sync with Column
append_text_column(_L("ID"), widths[0]);
job_list->AppendProgressColumn(_L("Progress"), wxDATAVIEW_CELL_INERT, widths[1], wxALIGN_LEFT, wxDATAVIEW_COL_RESIZABLE | wxDATAVIEW_COL_SORTABLE);
append_text_column(_L("Status"),widths[2]);
append_text_column(_L("Host"), widths[3]);
append_text_column(_CTX(L_CONTEXT("Size", "OfFile"), "OfFile"), widths[4]);
append_text_column(_L("Filename"), widths[5]);
append_text_column(_L("Message"), widths[6]);
//append_text_column(_L("Error Message"), -1, wxALIGN_CENTER, wxDATAVIEW_COL_HIDDEN);
auto *btnsizer = new wxBoxSizer(wxHORIZONTAL);
btn_cancel = new wxButton(this, wxID_DELETE, _L("Cancel selected"));
btn_cancel->Disable();
btn_error = new wxButton(this, wxID_ANY, _L("Show error message"));
btn_error->Disable();
// Note: The label needs to be present, otherwise we get accelerator bugs on Mac
auto *btn_close = new wxButton(this, wxID_CANCEL, _L("Close"));
btnsizer->Add(btn_cancel, 0, wxRIGHT, SPACING);
btnsizer->Add(btn_error, 0);
btnsizer->AddStretchSpacer();
btnsizer->Add(btn_close);
topsizer->Add(job_list, 1, wxEXPAND | wxBOTTOM, SPACING);
topsizer->Add(btnsizer, 0, wxEXPAND);
SetSizer(topsizer);
wxGetApp().UpdateDlgDarkUI(this);
wxGetApp().UpdateDVCDarkUI(job_list);
std::vector<int> size;
SetSize(load_user_data(UDT_SIZE, size) ? wxSize(size[0] * em, size[1] * em) : wxSize(HEIGHT * em, WIDTH * em));
Bind(wxEVT_SIZE, [this](wxSizeEvent& evt) {
OnSize(evt);
save_user_data(UDT_SIZE | UDT_POSITION | UDT_COLS);
});
std::vector<int> pos;
if (load_user_data(UDT_POSITION, pos))
SetPosition(wxPoint(pos[0], pos[1]));
Bind(wxEVT_MOVE, [this](wxMoveEvent& evt) {
save_user_data(UDT_SIZE | UDT_POSITION | UDT_COLS);
});
job_list->Bind(wxEVT_DATAVIEW_SELECTION_CHANGED, [this](wxDataViewEvent&) { on_list_select(); });
btn_cancel->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) {
int selected = job_list->GetSelectedRow();
if (selected == wxNOT_FOUND) { return; }
const JobState state = get_state(selected);
if (state < ST_ERROR) {
GUI::wxGetApp().printhost_job_queue().cancel(selected);
}
});
btn_error->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) {
int selected = job_list->GetSelectedRow();
if (selected == wxNOT_FOUND) { return; }
GUI::show_error(nullptr, job_list->GetTextValue(selected, COL_ERRORMSG));
});
}
void PrintHostQueueDialog::append_job(const PrintHostJob &job)
{
wxCHECK_RET(!job.empty(), "PrintHostQueueDialog: Attempt to append an empty job");
wxVector<wxVariant> fields;
fields.push_back(wxVariant(wxString::Format("%d", job_list->GetItemCount() + 1)));
fields.push_back(wxVariant(0));
fields.push_back(wxVariant(_L("Enqueued")));
fields.push_back(wxVariant(job.printhost->get_host()));
boost::system::error_code ec;
boost::uintmax_t size_i = boost::filesystem::file_size(job.upload_data.source_path, ec);
std::stringstream stream;
if (ec) {
stream << "unknown";
size_i = 0;
BOOST_LOG_TRIVIAL(error) << ec.message();
} else
stream << std::fixed << std::setprecision(2) << ((float)size_i / 1024 / 1024) << "MB";
fields.push_back(wxVariant(stream.str()));
fields.push_back(wxVariant(from_path(job.upload_data.upload_path)));
fields.push_back(wxVariant(""));
job_list->AppendItem(fields, static_cast<wxUIntPtr>(ST_NEW));
// Both strings are UTF-8 encoded.
upload_names.emplace_back(job.printhost->get_host(), job.upload_data.upload_path.string());
wxGetApp().notification_manager()->push_upload_job_notification(job_list->GetItemCount(), (float)size_i / 1024 / 1024, job.upload_data.upload_path.string(), job.printhost->get_host());
}
void PrintHostQueueDialog::on_dpi_changed(const wxRect &suggested_rect)
{
const int& em = em_unit();
msw_buttons_rescale(this, em, { wxID_DELETE, wxID_CANCEL, btn_error->GetId() });
SetMinSize(wxSize(HEIGHT * em, WIDTH * em));
Fit();
Refresh();
save_user_data(UDT_SIZE | UDT_POSITION | UDT_COLS);
}
void PrintHostQueueDialog::on_sys_color_changed()
{
#ifdef _WIN32
wxGetApp().UpdateDlgDarkUI(this);
wxGetApp().UpdateDVCDarkUI(job_list);
#endif
}
PrintHostQueueDialog::JobState PrintHostQueueDialog::get_state(int idx)
{
wxCHECK_MSG(idx >= 0 && idx < job_list->GetItemCount(), ST_ERROR, "Out of bounds access to job list");
return static_cast<JobState>(job_list->GetItemData(job_list->RowToItem(idx)));
}
void PrintHostQueueDialog::set_state(int idx, JobState state)
{
wxCHECK_RET(idx >= 0 && idx < job_list->GetItemCount(), "Out of bounds access to job list");
job_list->SetItemData(job_list->RowToItem(idx), static_cast<wxUIntPtr>(state));
switch (state) {
case ST_NEW: job_list->SetValue(_L("Enqueued"), idx, COL_STATUS); break;
case ST_PROGRESS: job_list->SetValue(_L("Uploading"), idx, COL_STATUS); break;
case ST_ERROR: job_list->SetValue(_L("Error"), idx, COL_STATUS); break;
case ST_CANCELLING: job_list->SetValue(_L("Cancelling"), idx, COL_STATUS); break;
case ST_CANCELLED: job_list->SetValue(_L("Cancelled"), idx, COL_STATUS); break;
case ST_COMPLETED: job_list->SetValue(_L("Completed"), idx, COL_STATUS); break;
}
// This might be ambigous call, but user data needs to be saved time to time
save_user_data(UDT_SIZE | UDT_POSITION | UDT_COLS);
}
void PrintHostQueueDialog::on_list_select()
{
int selected = job_list->GetSelectedRow();
if (selected != wxNOT_FOUND) {
const JobState state = get_state(selected);
btn_cancel->Enable(state < ST_ERROR);
btn_error->Enable(state == ST_ERROR);
Layout();
} else {
btn_cancel->Disable();
}
}
void PrintHostQueueDialog::on_progress(Event &evt)
{
wxCHECK_RET(evt.job_id < (size_t)job_list->GetItemCount(), "Out of bounds access to job list");
if (evt.progress < 100) {
set_state(evt.job_id, ST_PROGRESS);
job_list->SetValue(wxVariant(evt.progress), evt.job_id, COL_PROGRESS);
} else {
set_state(evt.job_id, ST_COMPLETED);
job_list->SetValue(wxVariant(100), evt.job_id, COL_PROGRESS);
}
on_list_select();
if (evt.progress > 0)
{
wxVariant nm, hst;
job_list->GetValue(nm, evt.job_id, COL_FILENAME);
job_list->GetValue(hst, evt.job_id, COL_HOST);
wxGetApp().notification_manager()->set_upload_job_notification_percentage(evt.job_id + 1, boost::nowide::narrow(nm.GetString()), boost::nowide::narrow(hst.GetString()), evt.progress / 100.f);
}
}
void PrintHostQueueDialog::on_error(Event &evt)
{
wxCHECK_RET(evt.job_id < (size_t)job_list->GetItemCount(), "Out of bounds access to job list");
set_state(evt.job_id, ST_ERROR);
auto errormsg = format_wxstr("%1%\n%2%", _L("Error uploading to print host") + ":", evt.status);
job_list->SetValue(wxVariant(0), evt.job_id, COL_PROGRESS);
job_list->SetValue(wxVariant(errormsg), evt.job_id, COL_ERRORMSG); // Stashes the error message into a hidden column for later
on_list_select();
GUI::show_error(nullptr, errormsg);
wxVariant nm, hst;
job_list->GetValue(nm, evt.job_id, COL_FILENAME);
job_list->GetValue(hst, evt.job_id, COL_HOST);
wxGetApp().notification_manager()->upload_job_notification_show_error(evt.job_id + 1, boost::nowide::narrow(nm.GetString()), boost::nowide::narrow(hst.GetString()));
}
void PrintHostQueueDialog::on_cancel(Event &evt)
{
wxCHECK_RET(evt.job_id < (size_t)job_list->GetItemCount(), "Out of bounds access to job list");
set_state(evt.job_id, ST_CANCELLED);
job_list->SetValue(wxVariant(0), evt.job_id, COL_PROGRESS);
on_list_select();
wxVariant nm, hst;
job_list->GetValue(nm, evt.job_id, COL_FILENAME);
job_list->GetValue(hst, evt.job_id, COL_HOST);
wxGetApp().notification_manager()->upload_job_notification_show_canceled(evt.job_id + 1, boost::nowide::narrow(nm.GetString()), boost::nowide::narrow(hst.GetString()));
}
void PrintHostQueueDialog::on_info(Event& evt)
{
/*
wxCHECK_RET(evt.job_id < (size_t)job_list->GetItemCount(), "Out of bounds access to job list");
if (evt.tag == L"resolve") {
wxVariant hst(evt.status);
job_list->SetValue(hst, evt.job_id, COL_HOST);
wxGetApp().notification_manager()->set_upload_job_notification_host(evt.job_id + 1, boost::nowide::narrow(evt.status));
} else if (evt.tag == L"complete") {
wxVariant hst(evt.status);
job_list->SetValue(hst, evt.job_id, COL_ERRORMSG);
wxGetApp().notification_manager()->set_upload_job_notification_completed(evt.job_id + 1);
wxGetApp().notification_manager()->set_upload_job_notification_status(evt.job_id + 1, boost::nowide::narrow(evt.status));
} else if(evt.tag == L"complete_with_warning"){
wxVariant hst(evt.status);
job_list->SetValue(hst, evt.job_id, COL_ERRORMSG);
wxGetApp().notification_manager()->set_upload_job_notification_completed_with_warning(evt.job_id + 1);
wxGetApp().notification_manager()->set_upload_job_notification_status(evt.job_id + 1, boost::nowide::narrow(evt.status));
} else if (evt.tag == L"set_complete_off") {
wxGetApp().notification_manager()->set_upload_job_notification_comp_on_100(evt.job_id + 1, false);
}
*/
}
void PrintHostQueueDialog::get_active_jobs(std::vector<std::pair<std::string, std::string>>& ret)
{
int ic = job_list->GetItemCount();
for (int i = 0; i < ic; i++)
{
auto item = job_list->RowToItem(i);
auto data = job_list->GetItemData(item);
JobState st = static_cast<JobState>(data);
if(st == JobState::ST_NEW || st == JobState::ST_PROGRESS)
ret.emplace_back(upload_names[i]);
}
}
void PrintHostQueueDialog::save_user_data(int udt)
{
const auto em = GetTextExtent("m").x;
auto *app_config = wxGetApp().app_config;
if (udt & UserDataType::UDT_SIZE) {
app_config->set("print_host_queue_dialog_height", std::to_string(this->GetSize().x / em));
app_config->set("print_host_queue_dialog_width", std::to_string(this->GetSize().y / em));
}
if (udt & UserDataType::UDT_POSITION)
{
app_config->set("print_host_queue_dialog_x", std::to_string(this->GetPosition().x));
app_config->set("print_host_queue_dialog_y", std::to_string(this->GetPosition().y));
}
if (udt & UserDataType::UDT_COLS)
{
for (size_t i = 0; i < job_list->GetColumnCount() - 1; i++)
{
app_config->set("print_host_queue_dialog_column_" + std::to_string(i), std::to_string(job_list->GetColumn(i)->GetWidth()));
}
}
}
bool PrintHostQueueDialog::load_user_data(int udt, std::vector<int>& vector)
{
auto* app_config = wxGetApp().app_config;
auto hasget = [app_config](const std::string& name, std::vector<int>& vector)->bool {
if (app_config->has(name)) {
std::string val = app_config->get(name);
if (!val.empty() || val[0]!='\0') {
vector.push_back(std::stoi(val));
return true;
}
}
return false;
};
if (udt & UserDataType::UDT_SIZE) {
if (!hasget("print_host_queue_dialog_height",vector))
return false;
if (!hasget("print_host_queue_dialog_width", vector))
return false;
}
if (udt & UserDataType::UDT_POSITION)
{
if (!hasget("print_host_queue_dialog_x", vector))
return false;
if (!hasget("print_host_queue_dialog_y", vector))
return false;
}
if (udt & UserDataType::UDT_COLS)
{
for (size_t i = 0; i < 7; i++)
{
if (!hasget("print_host_queue_dialog_column_" + std::to_string(i), vector))
return false;
}
}
return true;
}
ElegooPrintHostSendDialog::ElegooPrintHostSendDialog(const fs::path& path,
PrintHostPostUploadActions post_actions,
const wxArrayString& groups,
const wxArrayString& storage_paths,
const wxArrayString& storage_names,
bool switch_to_device_tab)
: PrintHostSendDialog(path, post_actions, groups, storage_paths, storage_names, switch_to_device_tab)
, m_timeLapse(0)
, m_heatedBedLeveling(0)
, m_BedType(BedType::btPTE)
{}
void ElegooPrintHostSendDialog::init() {
auto preset_bundle = wxGetApp().preset_bundle;
auto model_id = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);
if (!(model_id == "Elegoo-CC" || model_id == "Elegoo-C")) {
PrintHostSendDialog::init();
return;
}
const auto& path = m_path;
const auto& storage_paths = m_paths;
const auto& post_actions = m_post_actions;
const auto& storage_names = m_storage_names;
this->SetMinSize(wxSize(500, 300));
const AppConfig* app_config = wxGetApp().app_config;
std::string uploadAndPrint = app_config->get("recent", CONFIG_KEY_UPLOADANDPRINT);
if (!uploadAndPrint.empty())
post_upload_action = static_cast<PrintHostPostUploadAction>(std::stoi(uploadAndPrint));
std::string timeLapse = app_config->get("recent", CONFIG_KEY_TIMELAPSE);
if (!timeLapse.empty())
m_timeLapse = std::stoi(timeLapse);
std::string heatedBedLeveling = app_config->get("recent", CONFIG_KEY_HEATEDBEDLEVELING);
if (!heatedBedLeveling.empty())
m_heatedBedLeveling = std::stoi(heatedBedLeveling);
std::string bedType = app_config->get("recent", CONFIG_KEY_BEDTYPE);
if (!bedType.empty())
m_BedType = static_cast<BedType>(std::stoi(bedType));
auto* label_dir_hint = new wxStaticText(this, wxID_ANY, _L("Use forward slashes ( / ) as a directory separator if needed."));
label_dir_hint->Wrap(CONTENT_WIDTH * wxGetApp().em_unit());
wxSizerFlags flags = wxSizerFlags().Border(wxRIGHT, 16).Expand();
content_sizer->Add(txt_filename, flags);
content_sizer->AddSpacer(4);
content_sizer->Add(label_dir_hint);
content_sizer->AddSpacer(VERT_SPACING);
if (combo_groups != nullptr) {
// Repetier specific: Show a selection of file groups.
auto* label_group = new wxStaticText(this, wxID_ANY, _L("Group"));
content_sizer->Add(label_group);
content_sizer->Add(combo_groups, 0, wxBOTTOM, 2 * VERT_SPACING);
wxString recent_group = from_u8(app_config->get("recent", CONFIG_KEY_GROUP));
if (!recent_group.empty())
combo_groups->SetValue(recent_group);
}
if (combo_storage != nullptr) {
// PrusaLink specific: User needs to choose a storage
auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ":");
content_sizer->Add(label_group);
content_sizer->Add(combo_storage, 0, wxBOTTOM, 2 * VERT_SPACING);
combo_storage->SetValue(storage_names.front());
wxString recent_storage = from_u8(app_config->get("recent", CONFIG_KEY_STORAGE));
if (!recent_storage.empty())
combo_storage->SetValue(recent_storage);
} else if (storage_names.GetCount() == 1) {
// PrusaLink specific: Show which storage has been detected.
auto* label_group = new wxStaticText(this, wxID_ANY, _L("Upload to storage") + ": " + storage_names.front());
content_sizer->Add(label_group);
m_preselected_storage = m_paths.front();
}
wxString recent_path = from_u8(app_config->get("recent", CONFIG_KEY_PATH));
if (recent_path.Length() > 0 && recent_path[recent_path.Length() - 1] != '/') {
recent_path += '/';
}
const auto recent_path_len = recent_path.Length();
recent_path += path.filename().wstring();
wxString stem(path.stem().wstring());
const auto stem_len = stem.Length();
txt_filename->SetValue(recent_path);
{
auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
auto checkbox = new ::CheckBox(this, wxID_APPLY);
checkbox->SetValue(m_switch_to_device_tab);
checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
m_switch_to_device_tab = e.IsChecked();
e.Skip();
});
checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Switch to Device tab after upload."), wxDefaultPosition, wxDefaultSize, 0);
checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
content_sizer->Add(checkbox_sizer);
content_sizer->AddSpacer(VERT_SPACING);
}
warning_text = new wxStaticText(this, wxID_ANY,
_L("The selected bed type does not match the file. Please confirm before starting the print."),
wxDefaultPosition, wxDefaultSize, 0);
uploadandprint_sizer = new wxBoxSizer(wxVERTICAL);
{
auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
auto checkbox = new ::CheckBox(this);
checkbox->SetValue(post_upload_action == PrintHostPostUploadAction::StartPrint);
checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
if (e.IsChecked()) {
post_upload_action = PrintHostPostUploadAction::StartPrint;
} else {
post_upload_action = PrintHostPostUploadAction::None;
}
refresh();
e.Skip();
});
checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Upload and Print"), wxDefaultPosition, wxDefaultSize, 0);
checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
content_sizer->Add(checkbox_sizer);
content_sizer->AddSpacer(VERT_SPACING);
}
{
auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
auto checkbox = new ::CheckBox(this);
checkbox->SetValue(m_timeLapse == 1);
checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
m_timeLapse = e.IsChecked() ? 1 : 0;
e.Skip();
});
checkbox_sizer->AddSpacer(16);
checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Time-lapse"), wxDefaultPosition, wxDefaultSize, 0);
checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
uploadandprint_sizer->Add(checkbox_sizer);
uploadandprint_sizer->AddSpacer(VERT_SPACING);
}
{
auto checkbox_sizer = new wxBoxSizer(wxHORIZONTAL);
auto checkbox = new ::CheckBox(this);
checkbox->SetValue(m_heatedBedLeveling == 1);
checkbox->Bind(wxEVT_TOGGLEBUTTON, [this](wxCommandEvent& e) {
m_heatedBedLeveling = e.IsChecked() ? 1 : 0;
e.Skip();
});
checkbox_sizer->AddSpacer(16);
checkbox_sizer->Add(checkbox, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Heated Bed Leveling"), wxDefaultPosition, wxDefaultSize, 0);
checkbox_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
uploadandprint_sizer->Add(checkbox_sizer);
uploadandprint_sizer->AddSpacer(VERT_SPACING);
}
{
auto radioBoxA = new ::RadioBox(this);
auto radioBoxB = new ::RadioBox(this);
if (m_BedType == BedType::btPC)
radioBoxB->SetValue(true);
else
radioBoxA->SetValue(true);
radioBoxA->Bind(wxEVT_LEFT_DOWN, [this, radioBoxA, radioBoxB](wxMouseEvent& e) {
radioBoxA->SetValue(true);
radioBoxB->SetValue(false);
m_BedType = BedType::btPTE;
refresh();
});
radioBoxB->Bind(wxEVT_LEFT_DOWN, [this, radioBoxA, radioBoxB](wxMouseEvent& e) {
radioBoxA->SetValue(false);
radioBoxB->SetValue(true);
m_BedType = BedType::btPC;
refresh();
});
{
auto radio_sizer = new wxBoxSizer(wxHORIZONTAL);
radio_sizer->AddSpacer(16);
radio_sizer->Add(radioBoxA, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Textured Build Plate (Side A)"), wxDefaultPosition, wxDefaultSize, 0);
radio_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
uploadandprint_sizer->Add(radio_sizer);
uploadandprint_sizer->AddSpacer(VERT_SPACING);
}
{
auto radio_sizer = new wxBoxSizer(wxHORIZONTAL);
radio_sizer->AddSpacer(16);
radio_sizer->Add(radioBoxB, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
auto checkbox_text = new wxStaticText(this, wxID_ANY, _L("Smooth Build Plate (Side B)"), wxDefaultPosition, wxDefaultSize, 0);
radio_sizer->Add(checkbox_text, 0, wxALL | wxALIGN_CENTER, FromDIP(2));
checkbox_text->SetFont(::Label::Body_13);
checkbox_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#323A3D")));
uploadandprint_sizer->Add(radio_sizer);
uploadandprint_sizer->AddSpacer(VERT_SPACING);
}
}
{
auto h_sizer = new wxBoxSizer(wxHORIZONTAL);
warning_text->SetFont(::Label::Body_13);
warning_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#FF1001")));
// wrapping the text
warning_text->Wrap(350);
h_sizer->AddSpacer(16);
h_sizer->Add(warning_text);
uploadandprint_sizer->Add(h_sizer);
uploadandprint_sizer->AddSpacer(VERT_SPACING);
}
content_sizer->Add(uploadandprint_sizer);
uploadandprint_sizer->Show(post_upload_action == PrintHostPostUploadAction::StartPrint);
warning_text->Show(post_upload_action == PrintHostPostUploadAction::StartPrint && appBedType() != m_BedType);
uploadandprint_sizer->Layout();
if (size_t extension_start = recent_path.find_last_of('.'); extension_start != std::string::npos)
m_valid_suffix = recent_path.substr(extension_start);
// .gcode suffix control
auto validate_path = [this](const wxString& path) -> bool {
if (!path.Lower().EndsWith(m_valid_suffix.Lower())) {
MessageDialog msg_wingow(this,
wxString::Format(_L("Upload filename doesn't end with \"%s\". Do you wish to continue?"),
m_valid_suffix),
wxString(SLIC3R_APP_NAME), wxYES | wxNO);
if (msg_wingow.ShowModal() == wxID_NO)
return false;
}
return true;
};
auto* btn_ok = add_button(wxID_OK, true, _L("Upload"));
btn_ok->Bind(wxEVT_BUTTON, [this, validate_path](wxCommandEvent&) {
if (validate_path(txt_filename->GetValue())) {
// post_upload_action = PrintHostPostUploadAction::None;
EndDialog(wxID_OK);
}
});
txt_filename->SetFocus();
add_button(wxID_CANCEL, false, _L("Cancel"));
finalize();
#ifdef __linux__
// On Linux with GTK2 when text control lose the focus then selection (colored background) disappears but text color stay white
// and as a result the text is invisible with light mode
// see https://github.com/prusa3d/PrusaSlicer/issues/4532
// Workaround: Unselect text selection explicitly on kill focus
txt_filename->Bind(
wxEVT_KILL_FOCUS,
[this](wxEvent& e) {
e.Skip();
txt_filename->SetInsertionPoint(txt_filename->GetLastPosition());
},
txt_filename->GetId());
#endif /* __linux__ */
Bind(wxEVT_SHOW, [=](const wxShowEvent&) {
// Another similar case where the function only works with EVT_SHOW + CallAfter,
// this time on Mac.
CallAfter([=]() {
txt_filename->SetInsertionPoint(0);
txt_filename->SetSelection(recent_path_len, recent_path_len + stem_len);
});
});
}
void ElegooPrintHostSendDialog::EndModal(int ret)
{
if (ret == wxID_OK) {
AppConfig* app_config = wxGetApp().app_config;
app_config->set("recent", CONFIG_KEY_UPLOADANDPRINT, std::to_string(static_cast<int>(post_upload_action)));
app_config->set("recent", CONFIG_KEY_TIMELAPSE, std::to_string(m_timeLapse));
app_config->set("recent", CONFIG_KEY_HEATEDBEDLEVELING, std::to_string(m_heatedBedLeveling));
app_config->set("recent", CONFIG_KEY_BEDTYPE, std::to_string(static_cast<int>(m_BedType)));
}
PrintHostSendDialog::EndModal(ret);
}
BedType ElegooPrintHostSendDialog::appBedType() const
{
std::string str_bed_type = wxGetApp().app_config->get("curr_bed_type");
int bed_type_value = atoi(str_bed_type.c_str());
return static_cast<BedType>(bed_type_value);
}
void ElegooPrintHostSendDialog::refresh()
{
if (uploadandprint_sizer) {
if (post_upload_action == PrintHostPostUploadAction::StartPrint) {
uploadandprint_sizer->Show(true);
} else {
uploadandprint_sizer->Show(false);
}
}
if (warning_text) {
warning_text->Show(post_upload_action == PrintHostPostUploadAction::StartPrint && appBedType() != m_BedType);
}
this->Layout();
this->Fit();
}
}}
Reference in a new issue View git blame Copy permalink