3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-30 20:21:12 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 5
OrcaSlicer/src/libslic3r/PrintConfig.hpp
Vojtech Bubnik 4620402ab4 WIP: Initial Fuzzy Skin implementaiton #2010 
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00

1550 lines
66 KiB
C++
Raw Blame History

// Configuration store of Slic3r.
//
// The configuration store is either static or dynamic.
// DynamicPrintConfig is used mainly at the user interface. while the StaticPrintConfig is used
// during the slicing and the g-code generation.
//
// The classes derived from StaticPrintConfig form a following hierarchy.
//
// FullPrintConfig
// PrintObjectConfig
// PrintRegionConfig
// PrintConfig
// GCodeConfig
//
#ifndef slic3r_PrintConfig_hpp_
#define slic3r_PrintConfig_hpp_
#include "libslic3r.h"
#include "Config.hpp"
// #define HAS_PRESSURE_EQUALIZER
namespace Slic3r {
enum GCodeFlavor : unsigned char {
gcfRepRapSprinter, gcfRepRapFirmware, gcfRepetier, gcfTeacup, gcfMakerWare, gcfMarlin, gcfSailfish, gcfMach3, gcfMachinekit,
gcfSmoothie, gcfNoExtrusion,
};
enum class MachineLimitsUsage {
EmitToGCode,
TimeEstimateOnly,
Ignore,
Count,
};
enum PrintHostType {
htOctoPrint, htDuet, htFlashAir, htAstroBox, htRepetier
};
enum AuthorizationType {
atKeyPassword, atUserPassword
};
enum class FuzzySkinPerimeterMode {
None,
External,
ExternalSkipFirst,
All
};
enum class FuzzySkinShape {
Triangle1,
Triangle2,
Triangle3,
Sawtooth1,
Sawtooth2,
Sawtooth3,
Random1,
Random2,
Random3
};
enum InfillPattern : int {
ipRectilinear, ipMonotonic, ipAlignedRectilinear, ipGrid, ipTriangles, ipStars, ipCubic, ipLine, ipConcentric, ipHoneycomb, ip3DHoneycomb,
ipGyroid, ipHilbertCurve, ipArchimedeanChords, ipOctagramSpiral, ipAdaptiveCubic, ipSupportCubic, ipCount,
};
enum class IroningType {
TopSurfaces,
TopmostOnly,
AllSolid,
Count,
};
enum SupportMaterialPattern {
smpRectilinear, smpRectilinearGrid, smpHoneycomb,
};
enum SeamPosition {
spRandom, spNearest, spAligned, spRear
};
enum SLAMaterial {
slamTough,
slamFlex,
slamCasting,
slamDental,
slamHeatResistant,
};
enum SLADisplayOrientation {
sladoLandscape,
sladoPortrait
};
enum SLAPillarConnectionMode {
slapcmZigZag,
slapcmCross,
slapcmDynamic
};
template<> inline const t_config_enum_values& ConfigOptionEnum<PrinterTechnology>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["FFF"] = ptFFF;
keys_map["SLA"] = ptSLA;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<GCodeFlavor>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["reprap"] = gcfRepRapSprinter;
keys_map["reprapfirmware"] = gcfRepRapFirmware;
keys_map["repetier"] = gcfRepetier;
keys_map["teacup"] = gcfTeacup;
keys_map["makerware"] = gcfMakerWare;
keys_map["marlin"] = gcfMarlin;
keys_map["sailfish"] = gcfSailfish;
keys_map["smoothie"] = gcfSmoothie;
keys_map["mach3"] = gcfMach3;
keys_map["machinekit"] = gcfMachinekit;
keys_map["no-extrusion"] = gcfNoExtrusion;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<MachineLimitsUsage>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["emit_to_gcode"] = int(MachineLimitsUsage::EmitToGCode);
keys_map["time_estimate_only"] = int(MachineLimitsUsage::TimeEstimateOnly);
keys_map["ignore"] = int(MachineLimitsUsage::Ignore);
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<PrintHostType>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["octoprint"] = htOctoPrint;
keys_map["duet"] = htDuet;
keys_map["flashair"] = htFlashAir;
keys_map["astrobox"] = htAstroBox;
keys_map["repetier"] = htRepetier;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<AuthorizationType>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["key"] = atKeyPassword;
keys_map["user"] = atUserPassword;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<FuzzySkinPerimeterMode>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["none"] = int(FuzzySkinPerimeterMode::None);
keys_map["external_only"] = int(FuzzySkinPerimeterMode::External);
keys_map["external_only_skip_first_layer"] = int(FuzzySkinPerimeterMode::ExternalSkipFirst);
keys_map["all"] = int(FuzzySkinPerimeterMode::All);
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<FuzzySkinShape>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["triangle1"] = int(FuzzySkinShape::Triangle1);
keys_map["triangle2"] = int(FuzzySkinShape::Triangle2);
keys_map["triangle3"] = int(FuzzySkinShape::Triangle3);
keys_map["sawtooth1"] = int(FuzzySkinShape::Sawtooth1);
keys_map["sawtooth2"] = int(FuzzySkinShape::Sawtooth2);
keys_map["sawtooth3"] = int(FuzzySkinShape::Sawtooth3);
keys_map["random1"] = int(FuzzySkinShape::Random1);
keys_map["random2"] = int(FuzzySkinShape::Random2);
keys_map["random3"] = int(FuzzySkinShape::Random3);
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<InfillPattern>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["rectilinear"] = ipRectilinear;
keys_map["monotonic"] = ipMonotonic;
keys_map["alignedrectilinear"] = ipAlignedRectilinear;
keys_map["grid"] = ipGrid;
keys_map["triangles"] = ipTriangles;
keys_map["stars"] = ipStars;
keys_map["cubic"] = ipCubic;
keys_map["line"] = ipLine;
keys_map["concentric"] = ipConcentric;
keys_map["honeycomb"] = ipHoneycomb;
keys_map["3dhoneycomb"] = ip3DHoneycomb;
keys_map["gyroid"] = ipGyroid;
keys_map["hilbertcurve"] = ipHilbertCurve;
keys_map["archimedeanchords"] = ipArchimedeanChords;
keys_map["octagramspiral"] = ipOctagramSpiral;
keys_map["adaptivecubic"] = ipAdaptiveCubic;
keys_map["supportcubic"] = ipSupportCubic;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<IroningType>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["top"] = int(IroningType::TopSurfaces);
keys_map["topmost"] = int(IroningType::TopmostOnly);
keys_map["solid"] = int(IroningType::AllSolid);
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<SupportMaterialPattern>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["rectilinear"] = smpRectilinear;
keys_map["rectilinear-grid"] = smpRectilinearGrid;
keys_map["honeycomb"] = smpHoneycomb;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<SeamPosition>::get_enum_values() {
static t_config_enum_values keys_map;
if (keys_map.empty()) {
keys_map["random"] = spRandom;
keys_map["nearest"] = spNearest;
keys_map["aligned"] = spAligned;
keys_map["rear"] = spRear;
}
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<SLADisplayOrientation>::get_enum_values() {
static const t_config_enum_values keys_map = {
{ "landscape", sladoLandscape},
{ "portrait", sladoPortrait}
};
return keys_map;
}
template<> inline const t_config_enum_values& ConfigOptionEnum<SLAPillarConnectionMode>::get_enum_values() {
static const t_config_enum_values keys_map = {
{"zigzag", slapcmZigZag},
{"cross", slapcmCross},
{"dynamic", slapcmDynamic}
};
return keys_map;
}
// Defines each and every confiuration option of Slic3r, including the properties of the GUI dialogs.
// Does not store the actual values, but defines default values.
class PrintConfigDef : public ConfigDef
{
public:
PrintConfigDef();
static void handle_legacy(t_config_option_key &opt_key, std::string &value);
// Array options growing with the number of extruders
const std::vector<std::string>& extruder_option_keys() const { return m_extruder_option_keys; }
// Options defining the extruder retract properties. These keys are sorted lexicographically.
// The extruder retract keys could be overidden by the same values defined at the Filament level
// (then the key is further prefixed with the "filament_" prefix).
const std::vector<std::string>& extruder_retract_keys() const { return m_extruder_retract_keys; }
private:
void init_common_params();
void init_fff_params();
void init_extruder_option_keys();
void init_sla_params();
std::vector<std::string> m_extruder_option_keys;
std::vector<std::string> m_extruder_retract_keys;
};
// The one and only global definition of SLic3r configuration options.
// This definition is constant.
extern const PrintConfigDef print_config_def;
class StaticPrintConfig;
// Minimum object distance for arrangement, based on printer technology.
double min_object_distance(const ConfigBase &cfg);
// Slic3r dynamic configuration, used to override the configuration
// per object, per modification volume or per printing material.
// The dynamic configuration is also used to store user modifications of the print global parameters,
// so the modified configuration values may be diffed against the active configuration
// to invalidate the proper slicing resp. g-code generation processing steps.
// This object is mapped to Perl as Slic3r::Config.
class DynamicPrintConfig : public DynamicConfig
{
public:
DynamicPrintConfig() {}
DynamicPrintConfig(const DynamicPrintConfig &rhs) : DynamicConfig(rhs) {}
DynamicPrintConfig(DynamicPrintConfig &&rhs) noexcept : DynamicConfig(std::move(rhs)) {}
explicit DynamicPrintConfig(const StaticPrintConfig &rhs);
explicit DynamicPrintConfig(const ConfigBase &rhs) : DynamicConfig(rhs) {}
DynamicPrintConfig& operator=(const DynamicPrintConfig &rhs) { DynamicConfig::operator=(rhs); return *this; }
DynamicPrintConfig& operator=(DynamicPrintConfig &&rhs) noexcept { DynamicConfig::operator=(std::move(rhs)); return *this; }
static DynamicPrintConfig full_print_config();
static DynamicPrintConfig* new_from_defaults_keys(const std::vector<std::string> &keys);
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
const ConfigDef* def() const override { return &print_config_def; }
void normalize_fdm();
void set_num_extruders(unsigned int num_extruders);
// Validate the PrintConfig. Returns an empty string on success, otherwise an error message is returned.
std::string validate();
// Verify whether the opt_key has not been obsoleted or renamed.
// Both opt_key and value may be modified by handle_legacy().
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
// handle_legacy() is called internally by set_deserialize().
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override
{ PrintConfigDef::handle_legacy(opt_key, value); }
};
class StaticPrintConfig : public StaticConfig
{
public:
StaticPrintConfig() {}
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
const ConfigDef* def() const override { return &print_config_def; }
// Reference to the cached list of keys.
virtual const t_config_option_keys& keys_ref() const = 0;
protected:
// Verify whether the opt_key has not been obsoleted or renamed.
// Both opt_key and value may be modified by handle_legacy().
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
// handle_legacy() is called internally by set_deserialize().
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override
{ PrintConfigDef::handle_legacy(opt_key, value); }
// Internal class for keeping a dynamic map to static options.
class StaticCacheBase
{
public:
// To be called during the StaticCache setup.
// Add one ConfigOption into m_map_name_to_offset.
template<typename T>
void opt_add(const std::string &name, const char *base_ptr, const T &opt)
{
assert(m_map_name_to_offset.find(name) == m_map_name_to_offset.end());
m_map_name_to_offset[name] = (const char*)&opt - base_ptr;
}
protected:
std::map<std::string, ptrdiff_t> m_map_name_to_offset;
};
// Parametrized by the type of the topmost class owning the options.
template<typename T>
class StaticCache : public StaticCacheBase
{
public:
// Calling the constructor of m_defaults with 0 forces m_defaults to not run the initialization.
StaticCache() : m_defaults(nullptr) {}
~StaticCache() { delete m_defaults; m_defaults = nullptr; }
bool initialized() const { return ! m_keys.empty(); }
ConfigOption* optptr(const std::string &name, T *owner) const
{
const auto it = m_map_name_to_offset.find(name);
return (it == m_map_name_to_offset.end()) ? nullptr : reinterpret_cast<ConfigOption*>((char*)owner + it->second);
}
const ConfigOption* optptr(const std::string &name, const T *owner) const
{
const auto it = m_map_name_to_offset.find(name);
return (it == m_map_name_to_offset.end()) ? nullptr : reinterpret_cast<const ConfigOption*>((const char*)owner + it->second);
}
const std::vector<std::string>& keys() const { return m_keys; }
const T& defaults() const { return *m_defaults; }
// To be called during the StaticCache setup.
// Collect option keys from m_map_name_to_offset,
// assign default values to m_defaults.
void finalize(T *defaults, const ConfigDef *defs)
{
assert(defs != nullptr);
m_defaults = defaults;
m_keys.clear();
m_keys.reserve(m_map_name_to_offset.size());
for (const auto &kvp : defs->options) {
// Find the option given the option name kvp.first by an offset from (char*)m_defaults.
ConfigOption *opt = this->optptr(kvp.first, m_defaults);
if (opt == nullptr)
// This option is not defined by the ConfigBase of type T.
continue;
m_keys.emplace_back(kvp.first);
const ConfigOptionDef *def = defs->get(kvp.first);
assert(def != nullptr);
if (def->default_value)
opt->set(def->default_value.get());
}
}
private:
T *m_defaults;
std::vector<std::string> m_keys;
};
};
#define STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
public: \
/* Overrides ConfigBase::optptr(). Find ando/or create a ConfigOption instance for a given name. */ \
const ConfigOption* optptr(const t_config_option_key &opt_key) const override \
{ return s_cache_##CLASS_NAME.optptr(opt_key, this); } \
/* Overrides ConfigBase::optptr(). Find ando/or create a ConfigOption instance for a given name. */ \
ConfigOption* optptr(const t_config_option_key &opt_key, bool create = false) override \
{ return s_cache_##CLASS_NAME.optptr(opt_key, this); } \
/* Overrides ConfigBase::keys(). Collect names of all configuration values maintained by this configuration store. */ \
t_config_option_keys keys() const override { return s_cache_##CLASS_NAME.keys(); } \
const t_config_option_keys& keys_ref() const override { return s_cache_##CLASS_NAME.keys(); } \
static const CLASS_NAME& defaults() { initialize_cache(); return s_cache_##CLASS_NAME.defaults(); } \
private: \
static void initialize_cache() \
{ \
if (! s_cache_##CLASS_NAME.initialized()) { \
CLASS_NAME *inst = new CLASS_NAME(1); \
inst->initialize(s_cache_##CLASS_NAME, (const char*)inst); \
s_cache_##CLASS_NAME.finalize(inst, inst->def()); \
} \
} \
/* Cache object holding a key/option map, a list of option keys and a copy of this static config initialized with the defaults. */ \
static StaticPrintConfig::StaticCache<CLASS_NAME> s_cache_##CLASS_NAME;
#define STATIC_PRINT_CONFIG_CACHE(CLASS_NAME) \
STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
public: \
/* Public default constructor will initialize the key/option cache and the default object copy if needed. */ \
CLASS_NAME() { initialize_cache(); *this = s_cache_##CLASS_NAME.defaults(); } \
protected: \
/* Protected constructor to be called when compounded. */ \
CLASS_NAME(int) {}
#define STATIC_PRINT_CONFIG_CACHE_DERIVED(CLASS_NAME) \
STATIC_PRINT_CONFIG_CACHE_BASE(CLASS_NAME) \
public: \
/* Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here. */ \
const ConfigDef* def() const override { return &print_config_def; } \
/* Handle legacy and obsoleted config keys */ \
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override \
{ PrintConfigDef::handle_legacy(opt_key, value); }
#define OPT_PTR(KEY) cache.opt_add(#KEY, base_ptr, this->KEY)
// This object is mapped to Perl as Slic3r::Config::PrintObject.
class PrintObjectConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(PrintObjectConfig)
public:
ConfigOptionBool clip_multipart_objects;
ConfigOptionBool dont_support_bridges;
ConfigOptionFloat elefant_foot_compensation;
ConfigOptionFloatOrPercent extrusion_width;
ConfigOptionFloatOrPercent first_layer_height;
ConfigOptionEnum<FuzzySkinPerimeterMode> fuzzy_skin_perimeter_mode;
ConfigOptionEnum<FuzzySkinShape> fuzzy_skin_shape;
ConfigOptionFloat fuzzy_skin_thickness;
ConfigOptionFloat fuzzy_skin_point_dist;
ConfigOptionBool infill_only_where_needed;
// Force the generation of solid shells between adjacent materials/volumes.
ConfigOptionBool interface_shells;
ConfigOptionFloat layer_height;
ConfigOptionInt raft_layers;
ConfigOptionEnum<SeamPosition> seam_position;
// ConfigOptionFloat seam_preferred_direction;
// ConfigOptionFloat seam_preferred_direction_jitter;
ConfigOptionFloat slice_closing_radius;
ConfigOptionBool support_material;
// Automatic supports (generated based on support_material_threshold).
ConfigOptionBool support_material_auto;
// Direction of the support pattern (in XY plane).
ConfigOptionFloat support_material_angle;
ConfigOptionBool support_material_buildplate_only;
ConfigOptionFloat support_material_contact_distance;
ConfigOptionInt support_material_enforce_layers;
ConfigOptionInt support_material_extruder;
ConfigOptionFloatOrPercent support_material_extrusion_width;
ConfigOptionBool support_material_interface_contact_loops;
ConfigOptionInt support_material_interface_extruder;
ConfigOptionInt support_material_interface_layers;
// Spacing between interface lines (the hatching distance). Set zero to get a solid interface.
ConfigOptionFloat support_material_interface_spacing;
ConfigOptionFloatOrPercent support_material_interface_speed;
ConfigOptionEnum<SupportMaterialPattern> support_material_pattern;
// Spacing between support material lines (the hatching distance).
ConfigOptionFloat support_material_spacing;
ConfigOptionFloat support_material_speed;
ConfigOptionBool support_material_synchronize_layers;
// Overhang angle threshold.
ConfigOptionInt support_material_threshold;
ConfigOptionBool support_material_with_sheath;
ConfigOptionFloatOrPercent support_material_xy_spacing;
ConfigOptionFloat xy_size_compensation;
ConfigOptionBool wipe_into_objects;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(clip_multipart_objects);
OPT_PTR(dont_support_bridges);
OPT_PTR(elefant_foot_compensation);
OPT_PTR(extrusion_width);
OPT_PTR(first_layer_height);
OPT_PTR(fuzzy_skin_perimeter_mode);
OPT_PTR(fuzzy_skin_shape);
OPT_PTR(fuzzy_skin_thickness);
OPT_PTR(fuzzy_skin_point_dist);
OPT_PTR(infill_only_where_needed);
OPT_PTR(interface_shells);
OPT_PTR(layer_height);
OPT_PTR(raft_layers);
OPT_PTR(seam_position);
OPT_PTR(slice_closing_radius);
// OPT_PTR(seam_preferred_direction);
// OPT_PTR(seam_preferred_direction_jitter);
OPT_PTR(support_material);
OPT_PTR(support_material_auto);
OPT_PTR(support_material_angle);
OPT_PTR(support_material_buildplate_only);
OPT_PTR(support_material_contact_distance);
OPT_PTR(support_material_enforce_layers);
OPT_PTR(support_material_interface_contact_loops);
OPT_PTR(support_material_extruder);
OPT_PTR(support_material_extrusion_width);
OPT_PTR(support_material_interface_extruder);
OPT_PTR(support_material_interface_layers);
OPT_PTR(support_material_interface_spacing);
OPT_PTR(support_material_interface_speed);
OPT_PTR(support_material_pattern);
OPT_PTR(support_material_spacing);
OPT_PTR(support_material_speed);
OPT_PTR(support_material_synchronize_layers);
OPT_PTR(support_material_xy_spacing);
OPT_PTR(support_material_threshold);
OPT_PTR(support_material_with_sheath);
OPT_PTR(xy_size_compensation);
OPT_PTR(wipe_into_objects);
}
};
// This object is mapped to Perl as Slic3r::Config::PrintRegion.
class PrintRegionConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(PrintRegionConfig)
public:
ConfigOptionFloat bridge_angle;
ConfigOptionInt bottom_solid_layers;
ConfigOptionFloat bottom_solid_min_thickness;
ConfigOptionFloat bridge_flow_ratio;
ConfigOptionFloat bridge_speed;
ConfigOptionBool ensure_vertical_shell_thickness;
ConfigOptionEnum<InfillPattern> top_fill_pattern;
ConfigOptionEnum<InfillPattern> bottom_fill_pattern;
ConfigOptionFloatOrPercent external_perimeter_extrusion_width;
ConfigOptionFloatOrPercent external_perimeter_speed;
ConfigOptionBool external_perimeters_first;
ConfigOptionBool extra_perimeters;
ConfigOptionFloat fill_angle;
ConfigOptionPercent fill_density;
ConfigOptionEnum<InfillPattern> fill_pattern;
ConfigOptionFloat gap_fill_speed;
ConfigOptionFloatOrPercent infill_anchor;
ConfigOptionFloatOrPercent infill_anchor_max;
ConfigOptionInt infill_extruder;
ConfigOptionFloatOrPercent infill_extrusion_width;
ConfigOptionInt infill_every_layers;
ConfigOptionFloatOrPercent infill_overlap;
ConfigOptionFloat infill_speed;
// Ironing options
ConfigOptionBool ironing;
ConfigOptionEnum<IroningType> ironing_type;
ConfigOptionPercent ironing_flowrate;
ConfigOptionFloat ironing_spacing;
ConfigOptionFloat ironing_speed;
// Detect bridging perimeters
ConfigOptionBool overhangs;
ConfigOptionInt perimeter_extruder;
ConfigOptionFloatOrPercent perimeter_extrusion_width;
ConfigOptionFloat perimeter_speed;
// Total number of perimeters.
ConfigOptionInt perimeters;
ConfigOptionFloatOrPercent small_perimeter_speed;
ConfigOptionFloat solid_infill_below_area;
ConfigOptionInt solid_infill_extruder;
ConfigOptionFloatOrPercent solid_infill_extrusion_width;
ConfigOptionInt solid_infill_every_layers;
ConfigOptionFloatOrPercent solid_infill_speed;
// Detect thin walls.
ConfigOptionBool thin_walls;
ConfigOptionFloatOrPercent top_infill_extrusion_width;
ConfigOptionInt top_solid_layers;
ConfigOptionFloat top_solid_min_thickness;
ConfigOptionFloatOrPercent top_solid_infill_speed;
ConfigOptionBool wipe_into_infill;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(bridge_angle);
OPT_PTR(bottom_solid_layers);
OPT_PTR(bottom_solid_min_thickness);
OPT_PTR(bridge_flow_ratio);
OPT_PTR(bridge_speed);
OPT_PTR(ensure_vertical_shell_thickness);
OPT_PTR(top_fill_pattern);
OPT_PTR(bottom_fill_pattern);
OPT_PTR(external_perimeter_extrusion_width);
OPT_PTR(external_perimeter_speed);
OPT_PTR(external_perimeters_first);
OPT_PTR(extra_perimeters);
OPT_PTR(fill_angle);
OPT_PTR(fill_density);
OPT_PTR(fill_pattern);
OPT_PTR(gap_fill_speed);
OPT_PTR(infill_anchor);
OPT_PTR(infill_anchor_max);
OPT_PTR(infill_extruder);
OPT_PTR(infill_extrusion_width);
OPT_PTR(infill_every_layers);
OPT_PTR(infill_overlap);
OPT_PTR(infill_speed);
OPT_PTR(ironing);
OPT_PTR(ironing_type);
OPT_PTR(ironing_flowrate);
OPT_PTR(ironing_spacing);
OPT_PTR(ironing_speed);
OPT_PTR(overhangs);
OPT_PTR(perimeter_extruder);
OPT_PTR(perimeter_extrusion_width);
OPT_PTR(perimeter_speed);
OPT_PTR(perimeters);
OPT_PTR(small_perimeter_speed);
OPT_PTR(solid_infill_below_area);
OPT_PTR(solid_infill_extruder);
OPT_PTR(solid_infill_extrusion_width);
OPT_PTR(solid_infill_every_layers);
OPT_PTR(solid_infill_speed);
OPT_PTR(thin_walls);
OPT_PTR(top_infill_extrusion_width);
OPT_PTR(top_solid_infill_speed);
OPT_PTR(top_solid_layers);
OPT_PTR(top_solid_min_thickness);
OPT_PTR(wipe_into_infill);
}
};
class MachineEnvelopeConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(MachineEnvelopeConfig)
public:
// Allowing the machine limits to be completely ignored or used just for time estimator.
ConfigOptionEnum<MachineLimitsUsage> machine_limits_usage;
// M201 X... Y... Z... E... [mm/sec^2]
ConfigOptionFloats machine_max_acceleration_x;
ConfigOptionFloats machine_max_acceleration_y;
ConfigOptionFloats machine_max_acceleration_z;
ConfigOptionFloats machine_max_acceleration_e;
// M203 X... Y... Z... E... [mm/sec]
ConfigOptionFloats machine_max_feedrate_x;
ConfigOptionFloats machine_max_feedrate_y;
ConfigOptionFloats machine_max_feedrate_z;
ConfigOptionFloats machine_max_feedrate_e;
// M204 S... [mm/sec^2]
ConfigOptionFloats machine_max_acceleration_extruding;
// M204 T... [mm/sec^2]
ConfigOptionFloats machine_max_acceleration_retracting;
// M205 X... Y... Z... E... [mm/sec]
ConfigOptionFloats machine_max_jerk_x;
ConfigOptionFloats machine_max_jerk_y;
ConfigOptionFloats machine_max_jerk_z;
ConfigOptionFloats machine_max_jerk_e;
// M205 T... [mm/sec]
ConfigOptionFloats machine_min_travel_rate;
// M205 S... [mm/sec]
ConfigOptionFloats machine_min_extruding_rate;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(machine_limits_usage);
OPT_PTR(machine_max_acceleration_x);
OPT_PTR(machine_max_acceleration_y);
OPT_PTR(machine_max_acceleration_z);
OPT_PTR(machine_max_acceleration_e);
OPT_PTR(machine_max_feedrate_x);
OPT_PTR(machine_max_feedrate_y);
OPT_PTR(machine_max_feedrate_z);
OPT_PTR(machine_max_feedrate_e);
OPT_PTR(machine_max_acceleration_extruding);
OPT_PTR(machine_max_acceleration_retracting);
OPT_PTR(machine_max_jerk_x);
OPT_PTR(machine_max_jerk_y);
OPT_PTR(machine_max_jerk_z);
OPT_PTR(machine_max_jerk_e);
OPT_PTR(machine_min_travel_rate);
OPT_PTR(machine_min_extruding_rate);
}
};
// This object is mapped to Perl as Slic3r::Config::GCode.
class GCodeConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(GCodeConfig)
public:
ConfigOptionString before_layer_gcode;
ConfigOptionString between_objects_gcode;
ConfigOptionFloats deretract_speed;
ConfigOptionString end_gcode;
ConfigOptionStrings end_filament_gcode;
ConfigOptionString extrusion_axis;
ConfigOptionFloats extrusion_multiplier;
ConfigOptionFloats filament_diameter;
ConfigOptionFloats filament_density;
ConfigOptionStrings filament_type;
ConfigOptionBools filament_soluble;
ConfigOptionFloats filament_cost;
ConfigOptionFloats filament_spool_weight;
ConfigOptionFloats filament_max_volumetric_speed;
ConfigOptionFloats filament_loading_speed;
ConfigOptionFloats filament_loading_speed_start;
ConfigOptionFloats filament_load_time;
ConfigOptionFloats filament_unloading_speed;
ConfigOptionFloats filament_unloading_speed_start;
ConfigOptionFloats filament_toolchange_delay;
ConfigOptionFloats filament_unload_time;
ConfigOptionInts filament_cooling_moves;
ConfigOptionFloats filament_cooling_initial_speed;
ConfigOptionFloats filament_minimal_purge_on_wipe_tower;
ConfigOptionFloats filament_cooling_final_speed;
ConfigOptionStrings filament_ramming_parameters;
ConfigOptionBool gcode_comments;
ConfigOptionEnum<GCodeFlavor> gcode_flavor;
ConfigOptionBool gcode_label_objects;
ConfigOptionString layer_gcode;
ConfigOptionFloat max_print_speed;
ConfigOptionFloat max_volumetric_speed;
#ifdef HAS_PRESSURE_EQUALIZER
ConfigOptionFloat max_volumetric_extrusion_rate_slope_positive;
ConfigOptionFloat max_volumetric_extrusion_rate_slope_negative;
#endif
ConfigOptionPercents retract_before_wipe;
ConfigOptionFloats retract_length;
ConfigOptionFloats retract_length_toolchange;
ConfigOptionFloats retract_lift;
ConfigOptionFloats retract_lift_above;
ConfigOptionFloats retract_lift_below;
ConfigOptionFloats retract_restart_extra;
ConfigOptionFloats retract_restart_extra_toolchange;
ConfigOptionFloats retract_speed;
ConfigOptionString start_gcode;
ConfigOptionStrings start_filament_gcode;
ConfigOptionBool single_extruder_multi_material;
ConfigOptionBool single_extruder_multi_material_priming;
ConfigOptionBool wipe_tower_no_sparse_layers;
ConfigOptionString toolchange_gcode;
ConfigOptionFloat travel_speed;
ConfigOptionBool use_firmware_retraction;
ConfigOptionBool use_relative_e_distances;
ConfigOptionBool use_volumetric_e;
ConfigOptionBool variable_layer_height;
ConfigOptionFloat cooling_tube_retraction;
ConfigOptionFloat cooling_tube_length;
ConfigOptionBool high_current_on_filament_swap;
ConfigOptionFloat parking_pos_retraction;
ConfigOptionBool remaining_times;
ConfigOptionBool silent_mode;
ConfigOptionFloat extra_loading_move;
ConfigOptionString color_change_gcode;
ConfigOptionString pause_print_gcode;
ConfigOptionString template_custom_gcode;
std::string get_extrusion_axis() const
{
return
((this->gcode_flavor.value == gcfMach3) || (this->gcode_flavor.value == gcfMachinekit)) ? "A" :
(this->gcode_flavor.value == gcfNoExtrusion) ? "" : this->extrusion_axis.value;
}
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(before_layer_gcode);
OPT_PTR(between_objects_gcode);
OPT_PTR(deretract_speed);
OPT_PTR(end_gcode);
OPT_PTR(end_filament_gcode);
OPT_PTR(extrusion_axis);
OPT_PTR(extrusion_multiplier);
OPT_PTR(filament_diameter);
OPT_PTR(filament_density);
OPT_PTR(filament_type);
OPT_PTR(filament_soluble);
OPT_PTR(filament_cost);
OPT_PTR(filament_spool_weight);
OPT_PTR(filament_max_volumetric_speed);
OPT_PTR(filament_loading_speed);
OPT_PTR(filament_loading_speed_start);
OPT_PTR(filament_load_time);
OPT_PTR(filament_unloading_speed);
OPT_PTR(filament_unloading_speed_start);
OPT_PTR(filament_unload_time);
OPT_PTR(filament_toolchange_delay);
OPT_PTR(filament_cooling_moves);
OPT_PTR(filament_cooling_initial_speed);
OPT_PTR(filament_minimal_purge_on_wipe_tower);
OPT_PTR(filament_cooling_final_speed);
OPT_PTR(filament_ramming_parameters);
OPT_PTR(gcode_comments);
OPT_PTR(gcode_flavor);
OPT_PTR(gcode_label_objects);
OPT_PTR(layer_gcode);
OPT_PTR(max_print_speed);
OPT_PTR(max_volumetric_speed);
#ifdef HAS_PRESSURE_EQUALIZER
OPT_PTR(max_volumetric_extrusion_rate_slope_positive);
OPT_PTR(max_volumetric_extrusion_rate_slope_negative);
#endif /* HAS_PRESSURE_EQUALIZER */
OPT_PTR(retract_before_wipe);
OPT_PTR(retract_length);
OPT_PTR(retract_length_toolchange);
OPT_PTR(retract_lift);
OPT_PTR(retract_lift_above);
OPT_PTR(retract_lift_below);
OPT_PTR(retract_restart_extra);
OPT_PTR(retract_restart_extra_toolchange);
OPT_PTR(retract_speed);
OPT_PTR(single_extruder_multi_material);
OPT_PTR(single_extruder_multi_material_priming);
OPT_PTR(wipe_tower_no_sparse_layers);
OPT_PTR(start_gcode);
OPT_PTR(start_filament_gcode);
OPT_PTR(toolchange_gcode);
OPT_PTR(travel_speed);
OPT_PTR(use_firmware_retraction);
OPT_PTR(use_relative_e_distances);
OPT_PTR(use_volumetric_e);
OPT_PTR(variable_layer_height);
OPT_PTR(cooling_tube_retraction);
OPT_PTR(cooling_tube_length);
OPT_PTR(high_current_on_filament_swap);
OPT_PTR(parking_pos_retraction);
OPT_PTR(remaining_times);
OPT_PTR(silent_mode);
OPT_PTR(extra_loading_move);
OPT_PTR(color_change_gcode);
OPT_PTR(pause_print_gcode);
OPT_PTR(template_custom_gcode);
}
};
// This object is mapped to Perl as Slic3r::Config::Print.
class PrintConfig : public MachineEnvelopeConfig, public GCodeConfig
{
STATIC_PRINT_CONFIG_CACHE_DERIVED(PrintConfig)
PrintConfig() : MachineEnvelopeConfig(0), GCodeConfig(0) { initialize_cache(); *this = s_cache_PrintConfig.defaults(); }
public:
ConfigOptionBool avoid_crossing_perimeters;
ConfigOptionFloatOrPercent avoid_crossing_perimeters_max_detour;
ConfigOptionPoints bed_shape;
ConfigOptionInts bed_temperature;
ConfigOptionFloat bridge_acceleration;
ConfigOptionInts bridge_fan_speed;
ConfigOptionFloat brim_width;
ConfigOptionBool complete_objects;
ConfigOptionFloats colorprint_heights;
ConfigOptionBools cooling;
ConfigOptionFloat default_acceleration;
ConfigOptionInts disable_fan_first_layers;
ConfigOptionFloat duplicate_distance;
ConfigOptionFloat extruder_clearance_height;
ConfigOptionFloat extruder_clearance_radius;
ConfigOptionStrings extruder_colour;
ConfigOptionPoints extruder_offset;
ConfigOptionBools fan_always_on;
ConfigOptionInts fan_below_layer_time;
ConfigOptionStrings filament_colour;
ConfigOptionStrings filament_notes;
ConfigOptionFloat first_layer_acceleration;
ConfigOptionInts first_layer_bed_temperature;
ConfigOptionFloatOrPercent first_layer_extrusion_width;
ConfigOptionFloatOrPercent first_layer_speed;
ConfigOptionInts first_layer_temperature;
ConfigOptionInts full_fan_speed_layer;
ConfigOptionFloat infill_acceleration;
ConfigOptionBool infill_first;
ConfigOptionInts max_fan_speed;
ConfigOptionFloats max_layer_height;
ConfigOptionInts min_fan_speed;
ConfigOptionFloats min_layer_height;
ConfigOptionFloat max_print_height;
ConfigOptionFloats min_print_speed;
ConfigOptionFloat min_skirt_length;
ConfigOptionString notes;
ConfigOptionFloats nozzle_diameter;
ConfigOptionBool only_retract_when_crossing_perimeters;
ConfigOptionBool ooze_prevention;
ConfigOptionString output_filename_format;
ConfigOptionFloat perimeter_acceleration;
ConfigOptionStrings post_process;
ConfigOptionString printer_model;
ConfigOptionString printer_notes;
ConfigOptionFloat resolution;
ConfigOptionFloats retract_before_travel;
ConfigOptionBools retract_layer_change;
ConfigOptionFloat skirt_distance;
ConfigOptionInt skirt_height;
ConfigOptionBool draft_shield;
ConfigOptionInt skirts;
ConfigOptionInts slowdown_below_layer_time;
ConfigOptionBool spiral_vase;
ConfigOptionInt standby_temperature_delta;
ConfigOptionInts temperature;
ConfigOptionInt threads;
ConfigOptionBools wipe;
ConfigOptionBool wipe_tower;
ConfigOptionFloat wipe_tower_x;
ConfigOptionFloat wipe_tower_y;
ConfigOptionFloat wipe_tower_width;
ConfigOptionFloat wipe_tower_per_color_wipe;
ConfigOptionFloat wipe_tower_rotation_angle;
ConfigOptionFloat wipe_tower_bridging;
ConfigOptionFloats wiping_volumes_matrix;
ConfigOptionFloats wiping_volumes_extruders;
ConfigOptionFloat z_offset;
protected:
PrintConfig(int) : MachineEnvelopeConfig(1), GCodeConfig(1) {}
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
this->MachineEnvelopeConfig::initialize(cache, base_ptr);
this->GCodeConfig::initialize(cache, base_ptr);
OPT_PTR(avoid_crossing_perimeters);
OPT_PTR(avoid_crossing_perimeters_max_detour);
OPT_PTR(bed_shape);
OPT_PTR(bed_temperature);
OPT_PTR(bridge_acceleration);
OPT_PTR(bridge_fan_speed);
OPT_PTR(brim_width);
OPT_PTR(complete_objects);
OPT_PTR(colorprint_heights);
OPT_PTR(cooling);
OPT_PTR(default_acceleration);
OPT_PTR(disable_fan_first_layers);
OPT_PTR(duplicate_distance);
OPT_PTR(extruder_clearance_height);
OPT_PTR(extruder_clearance_radius);
OPT_PTR(extruder_colour);
OPT_PTR(extruder_offset);
OPT_PTR(fan_always_on);
OPT_PTR(fan_below_layer_time);
OPT_PTR(filament_colour);
OPT_PTR(filament_notes);
OPT_PTR(first_layer_acceleration);
OPT_PTR(first_layer_bed_temperature);
OPT_PTR(first_layer_extrusion_width);
OPT_PTR(first_layer_speed);
OPT_PTR(first_layer_temperature);
OPT_PTR(full_fan_speed_layer);
OPT_PTR(infill_acceleration);
OPT_PTR(infill_first);
OPT_PTR(max_fan_speed);
OPT_PTR(max_layer_height);
OPT_PTR(min_fan_speed);
OPT_PTR(min_layer_height);
OPT_PTR(max_print_height);
OPT_PTR(min_print_speed);
OPT_PTR(min_skirt_length);
OPT_PTR(notes);
OPT_PTR(nozzle_diameter);
OPT_PTR(only_retract_when_crossing_perimeters);
OPT_PTR(ooze_prevention);
OPT_PTR(output_filename_format);
OPT_PTR(perimeter_acceleration);
OPT_PTR(post_process);
OPT_PTR(printer_model);
OPT_PTR(printer_notes);
OPT_PTR(resolution);
OPT_PTR(retract_before_travel);
OPT_PTR(retract_layer_change);
OPT_PTR(skirt_distance);
OPT_PTR(skirt_height);
OPT_PTR(draft_shield);
OPT_PTR(skirts);
OPT_PTR(slowdown_below_layer_time);
OPT_PTR(spiral_vase);
OPT_PTR(standby_temperature_delta);
OPT_PTR(temperature);
OPT_PTR(threads);
OPT_PTR(wipe);
OPT_PTR(wipe_tower);
OPT_PTR(wipe_tower_x);
OPT_PTR(wipe_tower_y);
OPT_PTR(wipe_tower_width);
OPT_PTR(wipe_tower_per_color_wipe);
OPT_PTR(wipe_tower_rotation_angle);
OPT_PTR(wipe_tower_bridging);
OPT_PTR(wiping_volumes_matrix);
OPT_PTR(wiping_volumes_extruders);
OPT_PTR(z_offset);
}
};
// This object is mapped to Perl as Slic3r::Config::Full.
class FullPrintConfig :
public PrintObjectConfig,
public PrintRegionConfig,
public PrintConfig
{
STATIC_PRINT_CONFIG_CACHE_DERIVED(FullPrintConfig)
FullPrintConfig() : PrintObjectConfig(0), PrintRegionConfig(0), PrintConfig(0) { initialize_cache(); *this = s_cache_FullPrintConfig.defaults(); }
public:
// Validate the FullPrintConfig. Returns an empty string on success, otherwise an error message is returned.
std::string validate();
protected:
// Protected constructor to be called to initialize ConfigCache::m_default.
FullPrintConfig(int) : PrintObjectConfig(0), PrintRegionConfig(0), PrintConfig(0) {}
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
this->PrintObjectConfig::initialize(cache, base_ptr);
this->PrintRegionConfig::initialize(cache, base_ptr);
this->PrintConfig ::initialize(cache, base_ptr);
}
};
// This object is mapped to Perl as Slic3r::Config::PrintRegion.
class SLAPrintConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(SLAPrintConfig)
public:
ConfigOptionString output_filename_format;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(output_filename_format);
}
};
class SLAPrintObjectConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(SLAPrintObjectConfig)
public:
ConfigOptionFloat layer_height;
//Number of the layers needed for the exposure time fade [3;20]
ConfigOptionInt faded_layers /*= 10*/;
ConfigOptionFloat slice_closing_radius;
// Enabling or disabling support creation
ConfigOptionBool supports_enable;
// Diameter in mm of the pointing side of the head.
ConfigOptionFloat support_head_front_diameter /*= 0.2*/;
// How much the pinhead has to penetrate the model surface
ConfigOptionFloat support_head_penetration /*= 0.2*/;
// Width in mm from the back sphere center to the front sphere center.
ConfigOptionFloat support_head_width /*= 1.0*/;
// Radius in mm of the support pillars.
ConfigOptionFloat support_pillar_diameter /*= 0.8*/;
// The percentage of smaller pillars compared to the normal pillar diameter
// which are used in problematic areas where a normal pilla cannot fit.
ConfigOptionPercent support_small_pillar_diameter_percent;
// How much bridge (supporting another pinhead) can be placed on a pillar.
ConfigOptionInt support_max_bridges_on_pillar;
// How the pillars are bridged together
ConfigOptionEnum<SLAPillarConnectionMode> support_pillar_connection_mode;
// Generate only ground facing supports
ConfigOptionBool support_buildplate_only;
// TODO: unimplemented at the moment. This coefficient will have an impact
// when bridges and pillars are merged. The resulting pillar should be a bit
// thicker than the ones merging into it. How much thicker? I don't know
// but it will be derived from this value.
ConfigOptionFloat support_pillar_widening_factor;
// Radius in mm of the pillar base.
ConfigOptionFloat support_base_diameter /*= 2.0*/;
// The height of the pillar base cone in mm.
ConfigOptionFloat support_base_height /*= 1.0*/;
// The minimum distance of the pillar base from the model in mm.
ConfigOptionFloat support_base_safety_distance; /*= 1.0*/
// The default angle for connecting support sticks and junctions.
ConfigOptionFloat support_critical_angle /*= 45*/;
// The max length of a bridge in mm
ConfigOptionFloat support_max_bridge_length /*= 15.0*/;
// The max distance of two pillars to get cross linked.
ConfigOptionFloat support_max_pillar_link_distance;
// The elevation in Z direction upwards. This is the space between the pad
// and the model object's bounding box bottom. Units in mm.
ConfigOptionFloat support_object_elevation /*= 5.0*/;
/////// Following options influence automatic support points placement:
ConfigOptionInt support_points_density_relative;
ConfigOptionFloat support_points_minimal_distance;
// Now for the base pool (pad) /////////////////////////////////////////////
// Enabling or disabling support creation
ConfigOptionBool pad_enable;
// The thickness of the pad walls
ConfigOptionFloat pad_wall_thickness /*= 2*/;
// The height of the pad from the bottom to the top not considering the pit
ConfigOptionFloat pad_wall_height /*= 5*/;
// How far should the pad extend around the contained geometry
ConfigOptionFloat pad_brim_size;
// The greatest distance where two individual pads are merged into one. The
// distance is measured roughly from the centroids of the pads.
ConfigOptionFloat pad_max_merge_distance /*= 50*/;
// The smoothing radius of the pad edges
// ConfigOptionFloat pad_edge_radius /*= 1*/;
// The slope of the pad wall...
ConfigOptionFloat pad_wall_slope;
// /////////////////////////////////////////////////////////////////////////
// Zero elevation mode parameters:
// - The object pad will be derived from the model geometry.
// - There will be a gap between the object pad and the generated pad
// according to the support_base_safety_distance parameter.
// - The two pads will be connected with tiny connector sticks
// /////////////////////////////////////////////////////////////////////////
// Disable the elevation (ignore its value) and use the zero elevation mode
ConfigOptionBool pad_around_object;
ConfigOptionBool pad_around_object_everywhere;
// This is the gap between the object bottom and the generated pad
ConfigOptionFloat pad_object_gap;
// How far to place the connector sticks on the object pad perimeter
ConfigOptionFloat pad_object_connector_stride;
// The width of the connectors sticks
ConfigOptionFloat pad_object_connector_width;
// How much should the tiny connectors penetrate into the model body
ConfigOptionFloat pad_object_connector_penetration;
// /////////////////////////////////////////////////////////////////////////
// Model hollowing parameters:
// - Models can be hollowed out as part of the SLA print process
// - Thickness of the hollowed model walls can be adjusted
// -
// - Additional holes will be drilled into the hollow model to allow for
// - resin removal.
// /////////////////////////////////////////////////////////////////////////
ConfigOptionBool hollowing_enable;
// The minimum thickness of the model walls to maintain. Note that the
// resulting walls may be thicker due to smoothing out fine cavities where
// resin could stuck.
ConfigOptionFloat hollowing_min_thickness;
// Indirectly controls the voxel size (resolution) used by openvdb
ConfigOptionFloat hollowing_quality;
// Indirectly controls the minimum size of created cavities.
ConfigOptionFloat hollowing_closing_distance;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(layer_height);
OPT_PTR(faded_layers);
OPT_PTR(slice_closing_radius);
OPT_PTR(supports_enable);
OPT_PTR(support_head_front_diameter);
OPT_PTR(support_head_penetration);
OPT_PTR(support_head_width);
OPT_PTR(support_pillar_diameter);
OPT_PTR(support_small_pillar_diameter_percent);
OPT_PTR(support_max_bridges_on_pillar);
OPT_PTR(support_pillar_connection_mode);
OPT_PTR(support_buildplate_only);
OPT_PTR(support_pillar_widening_factor);
OPT_PTR(support_base_diameter);
OPT_PTR(support_base_height);
OPT_PTR(support_base_safety_distance);
OPT_PTR(support_critical_angle);
OPT_PTR(support_max_bridge_length);
OPT_PTR(support_max_pillar_link_distance);
OPT_PTR(support_points_density_relative);
OPT_PTR(support_points_minimal_distance);
OPT_PTR(support_object_elevation);
OPT_PTR(pad_enable);
OPT_PTR(pad_wall_thickness);
OPT_PTR(pad_wall_height);
OPT_PTR(pad_brim_size);
OPT_PTR(pad_max_merge_distance);
// OPT_PTR(pad_edge_radius);
OPT_PTR(pad_wall_slope);
OPT_PTR(pad_around_object);
OPT_PTR(pad_around_object_everywhere);
OPT_PTR(pad_object_gap);
OPT_PTR(pad_object_connector_stride);
OPT_PTR(pad_object_connector_width);
OPT_PTR(pad_object_connector_penetration);
OPT_PTR(hollowing_enable);
OPT_PTR(hollowing_min_thickness);
OPT_PTR(hollowing_quality);
OPT_PTR(hollowing_closing_distance);
}
};
class SLAMaterialConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(SLAMaterialConfig)
public:
ConfigOptionFloat initial_layer_height;
ConfigOptionFloat bottle_cost;
ConfigOptionFloat bottle_volume;
ConfigOptionFloat bottle_weight;
ConfigOptionFloat material_density;
ConfigOptionFloat exposure_time;
ConfigOptionFloat initial_exposure_time;
ConfigOptionFloats material_correction;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(initial_layer_height);
OPT_PTR(bottle_cost);
OPT_PTR(bottle_volume);
OPT_PTR(bottle_weight);
OPT_PTR(material_density);
OPT_PTR(exposure_time);
OPT_PTR(initial_exposure_time);
OPT_PTR(material_correction);
}
};
class SLAPrinterConfig : public StaticPrintConfig
{
STATIC_PRINT_CONFIG_CACHE(SLAPrinterConfig)
public:
ConfigOptionEnum<PrinterTechnology> printer_technology;
ConfigOptionPoints bed_shape;
ConfigOptionFloat max_print_height;
ConfigOptionFloat display_width;
ConfigOptionFloat display_height;
ConfigOptionInt display_pixels_x;
ConfigOptionInt display_pixels_y;
ConfigOptionEnum<SLADisplayOrientation> display_orientation;
ConfigOptionBool display_mirror_x;
ConfigOptionBool display_mirror_y;
ConfigOptionFloats relative_correction;
ConfigOptionFloat absolute_correction;
ConfigOptionFloat elefant_foot_compensation;
ConfigOptionFloat elefant_foot_min_width;
ConfigOptionFloat gamma_correction;
ConfigOptionFloat fast_tilt_time;
ConfigOptionFloat slow_tilt_time;
ConfigOptionFloat area_fill;
ConfigOptionFloat min_exposure_time;
ConfigOptionFloat max_exposure_time;
ConfigOptionFloat min_initial_exposure_time;
ConfigOptionFloat max_initial_exposure_time;
protected:
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
OPT_PTR(printer_technology);
OPT_PTR(bed_shape);
OPT_PTR(max_print_height);
OPT_PTR(display_width);
OPT_PTR(display_height);
OPT_PTR(display_pixels_x);
OPT_PTR(display_pixels_y);
OPT_PTR(display_mirror_x);
OPT_PTR(display_mirror_y);
OPT_PTR(display_orientation);
OPT_PTR(relative_correction);
OPT_PTR(absolute_correction);
OPT_PTR(elefant_foot_compensation);
OPT_PTR(elefant_foot_min_width);
OPT_PTR(gamma_correction);
OPT_PTR(fast_tilt_time);
OPT_PTR(slow_tilt_time);
OPT_PTR(area_fill);
OPT_PTR(min_exposure_time);
OPT_PTR(max_exposure_time);
OPT_PTR(min_initial_exposure_time);
OPT_PTR(max_initial_exposure_time);
}
};
class SLAFullPrintConfig : public SLAPrinterConfig, public SLAPrintConfig, public SLAPrintObjectConfig, public SLAMaterialConfig
{
STATIC_PRINT_CONFIG_CACHE_DERIVED(SLAFullPrintConfig)
SLAFullPrintConfig() : SLAPrinterConfig(0), SLAPrintConfig(0), SLAPrintObjectConfig(0), SLAMaterialConfig(0) { initialize_cache(); *this = s_cache_SLAFullPrintConfig.defaults(); }
public:
// Validate the SLAFullPrintConfig. Returns an empty string on success, otherwise an error message is returned.
// std::string validate();
protected:
// Protected constructor to be called to initialize ConfigCache::m_default.
SLAFullPrintConfig(int) : SLAPrinterConfig(0), SLAPrintConfig(0), SLAPrintObjectConfig(0), SLAMaterialConfig(0) {}
void initialize(StaticCacheBase &cache, const char *base_ptr)
{
this->SLAPrinterConfig ::initialize(cache, base_ptr);
this->SLAPrintConfig ::initialize(cache, base_ptr);
this->SLAPrintObjectConfig::initialize(cache, base_ptr);
this->SLAMaterialConfig ::initialize(cache, base_ptr);
}
};
#undef STATIC_PRINT_CONFIG_CACHE
#undef STATIC_PRINT_CONFIG_CACHE_BASE
#undef STATIC_PRINT_CONFIG_CACHE_DERIVED
#undef OPT_PTR
class CLIActionsConfigDef : public ConfigDef
{
public:
CLIActionsConfigDef();
};
class CLITransformConfigDef : public ConfigDef
{
public:
CLITransformConfigDef();
};
class CLIMiscConfigDef : public ConfigDef
{
public:
CLIMiscConfigDef();
};
// This class defines the command line options representing actions.
extern const CLIActionsConfigDef cli_actions_config_def;
// This class defines the command line options representing transforms.
extern const CLITransformConfigDef cli_transform_config_def;
// This class defines all command line options that are not actions or transforms.
extern const CLIMiscConfigDef cli_misc_config_def;
class DynamicPrintAndCLIConfig : public DynamicPrintConfig
{
public:
DynamicPrintAndCLIConfig() {}
DynamicPrintAndCLIConfig(const DynamicPrintAndCLIConfig &other) : DynamicPrintConfig(other) {}
// Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here.
const ConfigDef* def() const override { return &s_def; }
// Verify whether the opt_key has not been obsoleted or renamed.
// Both opt_key and value may be modified by handle_legacy().
// If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
// handle_legacy() is called internally by set_deserialize().
void handle_legacy(t_config_option_key &opt_key, std::string &value) const override;
private:
class PrintAndCLIConfigDef : public ConfigDef
{
public:
PrintAndCLIConfigDef() {
this->options.insert(print_config_def.options.begin(), print_config_def.options.end());
this->options.insert(cli_actions_config_def.options.begin(), cli_actions_config_def.options.end());
this->options.insert(cli_transform_config_def.options.begin(), cli_transform_config_def.options.end());
this->options.insert(cli_misc_config_def.options.begin(), cli_misc_config_def.options.end());
for (const auto &kvp : this->options)
this->by_serialization_key_ordinal[kvp.second.serialization_key_ordinal] = &kvp.second;
}
// Do not release the default values, they are handled by print_config_def & cli_actions_config_def / cli_transform_config_def / cli_misc_config_def.
~PrintAndCLIConfigDef() { this->options.clear(); }
};
static PrintAndCLIConfigDef s_def;
};
Points get_bed_shape(const DynamicPrintConfig &cfg);
Points get_bed_shape(const PrintConfig &cfg);
Points get_bed_shape(const SLAPrinterConfig &cfg);
// ModelConfig is a wrapper around DynamicPrintConfig with an addition of a timestamp.
// Each change of ModelConfig is tracked by assigning a new timestamp from a global counter.
// The counter is used for faster synchronization of the background slicing thread
// with the front end by skipping synchronization of equal config dictionaries.
// The global counter is also used for avoiding unnecessary serialization of config
// dictionaries when taking an Undo snapshot.
//
// The global counter is NOT thread safe, therefore it is recommended to use ModelConfig from
// the main thread only.
//
// As there is a global counter and it is being increased with each change to any ModelConfig,
// if two ModelConfig dictionaries differ, they should differ with their timestamp as well.
// Therefore copying the ModelConfig including its timestamp is safe as there is no harm
// in having multiple ModelConfig with equal timestamps as long as their dictionaries are equal.
//
// The timestamp is used by the Undo/Redo stack. As zero timestamp means invalid timestamp
// to the Undo/Redo stack (zero timestamp means the Undo/Redo stack needs to serialize and
// compare serialized data for differences), zero timestamp shall never be used.
// Timestamp==1 shall only be used for empty dictionaries.
class ModelConfig
{
public:
void clear() { m_data.clear(); m_timestamp = 1; }
void assign_config(const ModelConfig &rhs) {
if (m_timestamp != rhs.m_timestamp) {
m_data = rhs.m_data;
m_timestamp = rhs.m_timestamp;
}
}
void assign_config(ModelConfig &&rhs) {
if (m_timestamp != rhs.m_timestamp) {
m_data = std::move(rhs.m_data);
m_timestamp = rhs.m_timestamp;
rhs.clear();
}
}
// Modification of the ModelConfig is not thread safe due to the global timestamp counter!
// Don't call modification methods from the back-end!
// Assign methods don't assign if src==dst to not having to bump the timestamp in case they are equal.
void assign_config(const DynamicPrintConfig &rhs) { if (m_data != rhs) { m_data = rhs; this->touch(); } }
void assign_config(DynamicPrintConfig &&rhs) { if (m_data != rhs) { m_data = std::move(rhs); this->touch(); } }
void apply(const ModelConfig &other, bool ignore_nonexistent = false) { this->apply(other.get(), ignore_nonexistent); }
void apply(const ConfigBase &other, bool ignore_nonexistent = false) { m_data.apply_only(other, other.keys(), ignore_nonexistent); this->touch(); }
void apply_only(const ModelConfig &other, const t_config_option_keys &keys, bool ignore_nonexistent = false) { this->apply_only(other.get(), keys, ignore_nonexistent); }
void apply_only(const ConfigBase &other, const t_config_option_keys &keys, bool ignore_nonexistent = false) { m_data.apply_only(other, keys, ignore_nonexistent); this->touch(); }
bool set_key_value(const std::string &opt_key, ConfigOption *opt) { bool out = m_data.set_key_value(opt_key, opt); this->touch(); return out; }
template<typename T>
void set(const std::string &opt_key, T value) { m_data.set(opt_key, value, true); this->touch(); }
void set_deserialize(const t_config_option_key &opt_key, const std::string &str, bool append = false)
{ m_data.set_deserialize(opt_key, str, append); this->touch(); }
bool erase(const t_config_option_key &opt_key) { bool out = m_data.erase(opt_key); if (out) this->touch(); return out; }
// Getters are thread safe.
// The following implicit conversion breaks the Cereal serialization.
// operator const DynamicPrintConfig&() const throw() { return this->get(); }
const DynamicPrintConfig& get() const throw() { return m_data; }
bool empty() const throw() { return m_data.empty(); }
size_t size() const throw() { return m_data.size(); }
auto cbegin() const { return m_data.cbegin(); }
auto cend() const { return m_data.cend(); }
t_config_option_keys keys() const { return m_data.keys(); }
bool has(const t_config_option_key &opt_key) const { return m_data.has(opt_key); }
const ConfigOption* option(const t_config_option_key &opt_key) const { return m_data.option(opt_key); }
int opt_int(const t_config_option_key &opt_key) const { return m_data.opt_int(opt_key); }
int extruder() const { return opt_int("extruder"); }
double opt_float(const t_config_option_key &opt_key) const { return m_data.opt_float(opt_key); }
std::string opt_serialize(const t_config_option_key &opt_key) const { return m_data.opt_serialize(opt_key); }
// Return an optional timestamp of this object.
// If the timestamp returned is non-zero, then the serialization framework will
// only save this object on the Undo/Redo stack if the timestamp is different
// from the timestmap of the object at the top of the Undo / Redo stack.
virtual uint64_t timestamp() const throw() { return m_timestamp; }
bool timestamp_matches(const ModelConfig &rhs) const throw() { return m_timestamp == rhs.m_timestamp; }
// Not thread safe! Should not be called from other than the main thread!
void touch() { m_timestamp = ++ s_last_timestamp; }
private:
friend class cereal::access;
template<class Archive> void serialize(Archive& ar) { ar(m_timestamp); ar(m_data); }
uint64_t m_timestamp { 1 };
DynamicPrintConfig m_data;
static uint64_t s_last_timestamp;
};
} // namespace Slic3r
// Serialization through the Cereal library
namespace cereal {
// Let cereal know that there are load / save non-member functions declared for DynamicPrintConfig, ignore serialize / load / save from parent class DynamicConfig.
template <class Archive> struct specialize<Archive, Slic3r::DynamicPrintConfig, cereal::specialization::non_member_load_save> {};
template<class Archive> void load(Archive& archive, Slic3r::DynamicPrintConfig &config)
{
size_t cnt;
archive(cnt);
config.clear();
for (size_t i = 0; i < cnt; ++ i) {
size_t serialization_key_ordinal;
archive(serialization_key_ordinal);
assert(serialization_key_ordinal > 0);
auto it = Slic3r::print_config_def.by_serialization_key_ordinal.find(serialization_key_ordinal);
assert(it != Slic3r::print_config_def.by_serialization_key_ordinal.end());
config.set_key_value(it->second->opt_key, it->second->load_option_from_archive(archive));
}
}
template<class Archive> void save(Archive& archive, const Slic3r::DynamicPrintConfig &config)
{
size_t cnt = config.size();
archive(cnt);
for (auto it = config.cbegin(); it != config.cend(); ++it) {
const Slic3r::ConfigOptionDef* optdef = Slic3r::print_config_def.get(it->first);
assert(optdef != nullptr);
assert(optdef->serialization_key_ordinal > 0);
archive(optdef->serialization_key_ordinal);
optdef->save_option_to_archive(archive, it->second.get());
}
}
}
#endif
Reference in a new issue View git blame Copy permalink