mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2026-02-15 08:59:39 -07:00
18652068e3
- Added AD5X - Added SUNLU filaments for AD5 and AD3 series - Updated SUNLU filament & setting IDs for BBL - Updated SUNLU parameters in OrcaLibrary - Fixes & enhancements for Flashforge profiles Co-authored-by: SoftFever <softfeverever@gmail.com>
55 lines
2.9 KiB
JSON
55 lines
2.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "Flashforge Guider 2s 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_flashforge_common",
|
|
"printer_model": "Flashforge Guider 2s",
|
|
"gcode_flavor": "marlin",
|
|
"default_print_profile": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
|
|
"nozzle_diameter": ["0.4"],
|
|
"printer_variant": "0.4",
|
|
"printable_area": ["-140x-125", "140x-125", "140x125", "-140x125"],
|
|
"printable_height": "300",
|
|
"extruder_offset": ["-20", "10"],
|
|
"extruder_clearance_height_to_lid": "70",
|
|
"extruder_clearance_height_to_rod": "23",
|
|
"extruder_clearance_radius": "40",
|
|
"use_relative_e_distances": "0",
|
|
"auxiliary_fan": "1",
|
|
"machine_max_acceleration_e": ["200", "200"],
|
|
"machine_max_acceleration_extruding": ["200", "200"],
|
|
"machine_max_acceleration_retracting": ["200", "200"],
|
|
"machine_max_acceleration_travel": ["200", "200"],
|
|
"machine_max_acceleration_x": ["200", "200"],
|
|
"machine_max_acceleration_y": ["200", "200"],
|
|
"machine_max_acceleration_z": ["200", "200"],
|
|
"machine_max_speed_e": ["100", "100"],
|
|
"machine_max_speed_x": ["200", "200"],
|
|
"machine_max_speed_y": ["200", "200"],
|
|
"machine_max_speed_z": ["20", "20"],
|
|
"machine_max_jerk_e": ["2.5", "2.5"],
|
|
"machine_max_jerk_x": ["9", "9"],
|
|
"machine_max_jerk_y": ["9", "9"],
|
|
"machine_max_jerk_z": ["3", "3"],
|
|
"max_layer_height": ["0.8"],
|
|
"min_layer_height": ["0.02"],
|
|
"printer_settings_id": "Flashforge",
|
|
"retraction_minimum_travel": ["1"],
|
|
"retract_before_wipe": ["100%"],
|
|
"retraction_length": ["1"],
|
|
"retract_length_toolchange": ["2"],
|
|
"retraction_speed": ["100"],
|
|
"z_hop": ["0"],
|
|
"single_extruder_multi_material": "0",
|
|
"change_filament_gcode": "",
|
|
"machine_pause_gcode": "M25",
|
|
"default_filament_profile": ["Flashforge Generic PLA"],
|
|
"machine_start_gcode": "M118 X10 Y10 Z10\nM140 S[bed_temperature_initial_layer_single]; set initial bed temp\nM104 S[nozzle_temperature_initial_layer] T0; set initial extruder temp\nM107; disable cooling fan\nG90; set to absolute positioning\nG28; home axes\nM132 X Y A B; recall home offsets from EPROM\nG1 Z50.0 F420; adjust Z\nG161 X Y F3300\nM7; wait for bed to stabilize\nM6 T0; wait for extruder to stabilize\nM651 S255; start case fan\nG1 Z0.3 F3600; move down to purge\nG92 E0; zero extruders\nG1 X120 Y-125 E20 F2000; extrude a line of filament across the front edge of the bed\nG1 X130 Y-125 F180; wait for ooze\nG1 X140 Y-125 F5000; fast wipe\nG1 Z1 F100; lift\nG92 E0; zero extruders again\nG1 E-1.0000 F1800",
|
|
"machine_end_gcode": "M104 S0 T0; cool down extruder\nM140 S0 T0; cool down bed\nG162 Z F1800\nG28 X Y; home axes\nM132 X Y A B; recall home offsets from EPROM\nM652; turn off rear fan\nG91; set to relative positioning\nM18; disable stepper motors",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"wipe_distance": "2",
|
|
"nozzle_type": "undefine"
|
|
}
|