mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-11-02 12:41:18 -07:00
24 lines
1 KiB
OpenSCAD
24 lines
1 KiB
OpenSCAD
// Used to generate a modifier mesh to do something every few layers.
|
|
// Load into OpenSCAD, tweak the variables below, export as STL and load as
|
|
// a modifier mesh. Then change settings for the modifier mesh.
|
|
|
|
// Written by Joseph Lenox; in public domain.
|
|
|
|
layer_height = 0.3; // set to layer height in slic3r for "best" results.
|
|
number_of_solid_layers = 2;
|
|
N = 4; // N > number_of_solid_layers or else the whole thing will be solid
|
|
model_height = 300.0;
|
|
model_width = 300.0; // these two should be at least as big as the model
|
|
model_depth = 300.0; // but bigger isn't a problem
|
|
initial_offset=0; // don't generate below this
|
|
|
|
position_on_bed=[0,0,0]; // in case you need to move it around
|
|
|
|
// don't touch below unless you know what you are doing.
|
|
simple_layers = round(model_height/layer_height);
|
|
translate(position_on_bed)
|
|
for (i = [initial_offset:N:simple_layers]) {
|
|
translate([0,0,i*layer_height])
|
|
translate([0,0,(layer_height*number_of_solid_layers)/2])
|
|
cube([model_width,model_depth,layer_height*number_of_solid_layers], center=true);
|
|
}
|