OrcaSlicer/src/slic3r/GUI/Jobs/SendJob.cpp

#include "SendJob.hpp"
#include "libslic3r/MTUtils.hpp"
#include "libslic3r/Model.hpp"
#include "libslic3r/PresetBundle.hpp"
#include "slic3r/GUI/Plater.hpp"
#include "slic3r/GUI/GUI.hpp"
#include "slic3r/GUI/GUI_App.hpp"

namespace Slic3r {
namespace GUI {

static wxString check_gcode_failed_str      = _L("Abnormal print file data. Please slice again");
static wxString printjob_cancel_str         = _L("Task canceled");
static wxString timeout_to_upload_str       = _L("Upload task timed out. Please check the network problem and try again");
static wxString failed_in_cloud_service_str = _L("Cloud service connection failed. Please try again.");
static wxString file_is_not_exists_str      = _L("Print file not found, please slice again");
static wxString file_over_size_str          = _L("The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again");
static wxString print_canceled_str          = _L("Task canceled");
static wxString upload_failed_str           = _L("Failed uploading print file");
static wxString upload_login_failed_str     = _L("Wrong Access code");


static wxString sending_over_lan_str = _L("Sending gcode file over LAN");
static wxString sending_over_cloud_str = _L("Sending gcode file through cloud service");

SendJob::SendJob(std::shared_ptr<ProgressIndicator> pri, Plater* plater, std::string dev_id)
: PlaterJob{ std::move(pri), plater },
    m_dev_id(dev_id)
{
    m_print_job_completed_id = plater->get_send_finished_event();
}

void SendJob::prepare()
{
    m_plater->get_print_job_data(&job_data);
}

void SendJob::on_exception(const std::exception_ptr &eptr)
{
    try {
        if (eptr)
            std::rethrow_exception(eptr);
    } catch (std::exception &e) {
        PlaterJob::on_exception(eptr);
    }
}

wxString SendJob::get_http_error_msg(unsigned int status, std::string body)
{
    int code = 0;
    std::string error;
    std::string message;
    wxString result;
    if (status >= 400 && status < 500)
        try {
        json j = json::parse(body);
        if (j.contains("code")) {
            if (!j["code"].is_null())
                code = j["code"].get<int>();
        }
        if (j.contains("error")) {
            if (!j["error"].is_null())
                error = j["error"].get<std::string>();
        }
        if (j.contains("message")) {
            if (!j["message"].is_null())
                message = j["message"].get<std::string>();
        }
        switch (status) {
            ;
        }
    }
    catch (...) {
        ;
    }
    else if (status == 503) {
        return _L("Service Unavailable");
    }
    else {
        wxString unkown_text = _L("Unkown Error.");
        unkown_text += wxString::Format("status=%u, body=%s", status, body);
        return unkown_text;
    }

    BOOST_LOG_TRIVIAL(error) << "http_error: status=" << status << ", code=" << code << ", error=" << error;

    result = wxString::Format("code=%u, error=%s", code, from_u8(error));
    return result;
}

inline std::string get_transform_string(int bytes)
{
	float ms = (float)bytes / 1024.0f / 1024.0f;
	float ks = (float)bytes / 1024.0f;
	char buffer[32];
	if (ms > 0)
		::sprintf(buffer, "%.1fM", ms);
	else if (ks > 0)
		::sprintf(buffer, "%.1fK", ks);
	else
		::sprintf(buffer, "%.1fK", ks);
	return buffer;
}

void SendJob::process()
{
    /* display info */
    wxString msg;
    int curr_percent = 10;
    NetworkAgent* m_agent = wxGetApp().getAgent();
    AppConfig* config = wxGetApp().app_config;

    if (this->connection_type == "lan") {
        msg = _L("Sending gcode file over LAN");
    }
    else {
        msg = _L("Sending gcode file through cloud service");
    }

    int result = -1;
    unsigned int http_code;
    std::string http_body;

    int total_plate_num = m_plater->get_partplate_list().get_plate_count();

    PartPlate* plate = m_plater->get_partplate_list().get_plate(job_data.plate_idx);
    if (plate == nullptr) {
        plate = m_plater->get_partplate_list().get_curr_plate();
        if (plate == nullptr)
        return;
    }

    /* check gcode is valid */
    if (!plate->is_valid_gcode_file()) {
        update_status(curr_percent, check_gcode_failed_str);
        return;
    }

    if (was_canceled()) {
        update_status(curr_percent, printjob_cancel_str);
        return;
    }

    std::string project_name = wxGetApp().plater()->get_project_name().ToUTF8().data();
    int curr_plate_idx = 0;
    if (job_data.plate_idx >= 0)
        curr_plate_idx = job_data.plate_idx + 1;
    else if (job_data.plate_idx == PLATE_CURRENT_IDX)
        curr_plate_idx = m_plater->get_partplate_list().get_curr_plate_index() + 1;

    BBL::PrintParams params;
    params.dev_id = m_dev_id;
    params.project_name = m_project_name + ".gcode.3mf";
    params.preset_name = wxGetApp().preset_bundle->prints.get_selected_preset_name();
    params.filename = job_data._3mf_path.string();
    params.config_filename = job_data._3mf_config_path.string();
    params.plate_index = curr_plate_idx;
    params.ams_mapping          = this->task_ams_mapping;
    params.connection_type      = this->connection_type;
    params.task_use_ams         = this->task_use_ams;

    // local print access
    params.dev_ip = m_dev_ip;
    params.username = "bblp";
    params.password = m_access_code;
    wxString error_text;
    wxString msg_text;

    const int StagePercentPoint[(int)PrintingStageFinished + 1] = {
        20,  // PrintingStageCreate
        30,  // PrintingStageUpload
        99, // PrintingStageWaiting
        99, // PrintingStageRecord
        99, // PrintingStageSending
        100  // PrintingStageFinished
    };

    auto update_fn = [this, &msg, &curr_percent, &error_text, StagePercentPoint](int stage, int code, std::string info) {
                        if (stage == SendingPrintJobStage::PrintingStageCreate) {
                            if (this->connection_type == "lan") {
                                msg = _L("Sending gcode file over LAN");
                            } else {
                                msg = _L("Sending gcode file to sdcard");
                            }
                        }
                        else if (stage == SendingPrintJobStage::PrintingStageUpload) {
                            if (code >= 0 && code <= 100 && !info.empty()) {
							    if (this->connection_type == "lan") {
								    msg = _L("Sending gcode file over LAN");
							    }
							    else {
								    msg = _L("Sending gcode file to sdcard");
							    }
                                if (!info.empty()) {
                                    msg += wxString::Format("(%s)", info);
                                }
                            }
                        }
						else if (stage == SendingPrintJobStage::PrintingStageFinished) {
                            msg = wxString::Format(_L("Successfully sent. Close current page in %s s"), info);
						}
						else {
							if (this->connection_type == "lan") {
								msg = _L("Sending gcode file over LAN");
							}
							else {
                                msg = _L("Sending gcode file over LAN");
							}
						}

                        // update current percnet
                        if (stage >= 0 && stage <= (int) PrintingStageFinished) {
                            curr_percent = StagePercentPoint[stage];
                            if ((stage == BBL::SendingPrintJobStage::PrintingStageUpload) &&
                                (code > 0 && code <= 100)) {
                                curr_percent = (StagePercentPoint[stage + 1] - StagePercentPoint[stage]) * code / 100 + StagePercentPoint[stage];
                            }
                        }

                        if (code < 0 || code > 100) {
                            error_text = this->get_http_error_msg(code, info);
                            msg += wxString::Format("[%s]", error_text);
                        }
                        this->update_status(curr_percent, msg);
                    };

    auto cancel_fn = [this]() {
            return was_canceled();
        };


    if (params.connection_type != "lan") {
        if (params.dev_ip.empty())
            params.comments = "no_ip";
        else if (this->cloud_print_only)
            params.comments = "low_version";
        else if (!this->has_sdcard)
            params.comments = "no_sdcard";
        else if (params.password.empty())
            params.comments = "no_password";

        if (!params.password.empty() 
            && !params.dev_ip.empty()
            && this->has_sdcard) {
            // try to send local with record
            BOOST_LOG_TRIVIAL(info) << "send_job: try to send gcode to printer";
            this->update_status(curr_percent, _L("Sending gcode file over LAN"));
            result = m_agent->start_send_gcode_to_sdcard(params, update_fn, cancel_fn);
            if (result == BAMBU_NETWORK_ERR_FTP_LOGIN_DENIED) {
                params.comments = "wrong_code";
            } else if (result == BAMBU_NETWORK_ERR_FTP_UPLOAD_FAILED) {
                params.comments = "upload_failed";
            } else {
                params.comments = (boost::format("failed(%1%)") % result).str();
            }
            if (result < 0) {
                // try to send with cloud
                BOOST_LOG_TRIVIAL(info) << "send_job: try to send gcode file to printer";
                this->update_status(curr_percent, _L("Sending gcode file over LAN"));
            }
        } else {
            BOOST_LOG_TRIVIAL(info) << "send_job: try to send gcode file to printer";
            this->update_status(curr_percent, _L("Sending gcode file over LAN"));
        }
    } else {
        if (this->has_sdcard) {
            this->update_status(curr_percent, _L("Sending gcode file over LAN"));
            result = m_agent->start_send_gcode_to_sdcard(params, update_fn, cancel_fn);
        } else {
            this->update_status(curr_percent, _L("An SD card needs to be inserted before sending to printer."));
            return;
        }
    }

    if (was_canceled()) {
        update_status(curr_percent, printjob_cancel_str);
        return;
    }

    if (result < 0) {
        if (result == BAMBU_NETWORK_ERR_FTP_LOGIN_DENIED) {
            msg_text = upload_failed_str;
        } if (result == BAMBU_NETWORK_ERR_FILE_NOT_EXIST) {
            msg_text = file_is_not_exists_str;
        } else if (result == BAMBU_NETWORK_ERR_FILE_OVER_SIZE) {
            msg_text = file_over_size_str;
        } else if (result == BAMBU_NETWORK_ERR_CHECK_MD5_FAILED) {
            msg_text = failed_in_cloud_service_str;
        } else if (result == BAMBU_NETWORK_ERR_INVALID_PARAMS) {
            msg_text = upload_failed_str;
        } else if (result == BAMBU_NETWORK_ERR_CANCELED) {
            msg_text = print_canceled_str;
        } else if (result == BAMBU_NETWORK_ERR_TIMEOUT) {
            msg_text = timeout_to_upload_str;
        } else if (result == BAMBU_NETWORK_ERR_INVALID_RESULT) {
            msg_text = upload_failed_str;
        } else if (result == BAMBU_NETWORK_ERR_FTP_UPLOAD_FAILED) {
            msg_text = upload_failed_str;
        } else {
            update_status(curr_percent, failed_in_cloud_service_str);
        }
        if (!error_text.IsEmpty())
            msg_text += wxString::Format("[%s]", error_text);
        update_status(curr_percent, msg_text);
        BOOST_LOG_TRIVIAL(error) << "send_job: failed, result = " << result;
    } else {
        BOOST_LOG_TRIVIAL(error) << "send_job: send ok.";
        //m_success_fun();
        wxCommandEvent* evt = new wxCommandEvent(m_print_job_completed_id);
        evt->SetString(m_dev_id);
        wxQueueEvent(m_plater, evt);
        m_job_finished = true;
    }
}

void SendJob::on_success(std::function<void()> success)
{
	m_success_fun = success;
}


void SendJob::finalize() {
    if (was_canceled()) return;

    Job::finalize();
}

void SendJob::set_project_name(std::string name)
{
    m_project_name = name;
}

}} // namespace Slic3r::GUI