mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2026-01-25 06:27:34 -07:00
52e4d2af82
* bugfix for TPU filament overrides * higher voluemetric flow * bugfix for to high speed at internal solid infill * Update Prusa.json * updated firmware check and nozzle settings * bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle * variables not defined in orcaslicer * bug fix volumetric speed, wrong value * added high flow base process * added highflow base process * added first full draft of high flow profiles, further tests are necessary * changed 0.35mm to 0.32mm for 0.6mm nozzle * minor changes to initial layer speeds * changed 0.35mm to 0.32mm for 0.6mm nozzle * furcer changes on accelartion and speed * added 0.35mm Standard @MK3.5 again for not breaking anythin for current users * Update 0.35mm Standard @MK3.5.json forgot to set the layer_height after creation of the 0.35mm profile * minor fixes in filament overrides * added profiles for high flow nozzles on the Prusa MINIIS * added fan_speedup_time for MINIIS and MK3.5 * changes to support interface, pattern and distance --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
24 lines
No EOL
736 B
JSON
24 lines
No EOL
736 B
JSON
{
|
|
"type": "process",
|
|
"name": "process_highflow_miniis",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"inherits": "process_common_miniis",
|
|
"initial_layer_speed": "40",
|
|
"initial_layer_infill_speed": "100",
|
|
"outer_wall_speed": "200",
|
|
"inner_wall_speed": "250",
|
|
"small_perimeter_speed": "170",
|
|
"sparse_infill_speed": "250",
|
|
"internal_solid_infill_speed": "250",
|
|
"top_surface_speed": "100",
|
|
"gap_infill_speed": "120",
|
|
"default_acceleration": "4000",
|
|
"initial_layer_acceleration": "500",
|
|
"top_surface_acceleration": "2000",
|
|
"inner_wall_acceleration": "4000",
|
|
"outer_wall_acceleration": "4000",
|
|
"bridge_acceleration": "1500",
|
|
"internal_solid_infill_acceleration": "3000",
|
|
"overhang_1_4_speed": "60"
|
|
} |