OrcaSlicer/src/avrdude/safemode.c

/*
 * avrdude - A Downloader/Uploader for AVR device programmers
 * avrdude is Copyright (C) 2000-2004  Brian S. Dean <bsd@bsdhome.com>
 *
 * This file: Copyright (C) 2005-2007 Colin O'Flynn <coflynn@newae.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program. If not, see <http://www.gnu.org/licenses/>.
 */


#include <stdio.h>

#include "ac_cfg.h"

#include "avrdude.h"
#include "libavrdude.h"

/* This value from ac_cfg.h */
/*
 * Writes the specified fuse in fusename (can be "lfuse", "hfuse", or
 * "efuse") and verifies it. Will try up to tries amount of times
 * before giving up
 */
int safemode_writefuse (unsigned char fuse, char * fusename, PROGRAMMER * pgm,
                        AVRPART * p, int tries)
{
  AVRMEM * m;
  unsigned char fuseread;
  int returnvalue = -1;

  m = avr_locate_mem(p, fusename);
  if (m == NULL) {
    return -1;
    }

  /* Keep trying to write then read back the fuse values */
  while (tries > 0) {
    if (avr_write_byte(pgm, p, m, 0, fuse) != 0)
        {
        continue;
        }
    if (pgm->read_byte(pgm, p, m, 0, &fuseread) != 0)
        {
        continue;
        }

    /* Report information to user if needed */
    avrdude_message(MSG_NOTICE, "%s: safemode: Wrote %s to %x, read as %x. %d attempts left\n",
                      progname, fusename, fuse, fuseread, tries-1);

    /* If fuse wrote OK, no need to keep going */
    if (fuse == fuseread) {
       tries = 0;
       returnvalue = 0;
    }
    tries--;
  }

  return returnvalue;
}

/*
 * Reads the fuses three times, checking that all readings are the
 * same. This will ensure that the before values aren't in error!
 */
int safemode_readfuses (unsigned char * lfuse, unsigned char * hfuse,
                        unsigned char * efuse, unsigned char * fuse,
                        PROGRAMMER * pgm, AVRPART * p)
{

  unsigned char value;
  unsigned char fusegood = 0;
  unsigned char allowfuseread = 1;
  unsigned char safemode_lfuse;
  unsigned char safemode_hfuse;
  unsigned char safemode_efuse;
  unsigned char safemode_fuse;
  AVRMEM * m;

  safemode_lfuse = *lfuse;
  safemode_hfuse = *hfuse;
  safemode_efuse = *efuse;
  safemode_fuse  = *fuse;


  /* Read fuse three times */
  fusegood = 2; /* If AVR device doesn't support this fuse, don't want
                   to generate a verify error */
  m = avr_locate_mem(p, "fuse");
  if (m != NULL) {
    fusegood = 0; /* By default fuse is a failure */
    if(pgm->read_byte(pgm, p, m, 0, &safemode_fuse) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 1, fuse value: %x\n",progname, safemode_fuse);
    if(pgm->read_byte(pgm, p, m, 0, &value) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 2, fuse value: %x\n",progname,  value);
    if (value == safemode_fuse) {
        if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
            {
            allowfuseread = 0;
            }
            avrdude_message(MSG_DEBUG, "%s: safemode read 3, fuse value: %x\n",progname,  value);
        if (value == safemode_fuse)
            {
            fusegood = 1; /* Fuse read OK three times */
            }
    }
  }

    //Programmer does not allow fuse reading.... no point trying anymore
    if (allowfuseread == 0)
        {
        return -5;
        }

    if (fusegood == 0) {
        avrdude_message(MSG_INFO, "%s: safemode: Verify error - unable to read fuse properly. "
                        "Programmer may not be reliable.\n", progname);
        return -1;
    }
    else if (fusegood == 1) {
        avrdude_message(MSG_NOTICE, "%s: safemode: fuse reads as %X\n", progname, safemode_fuse);
    }


  /* Read lfuse three times */
  fusegood = 2; /* If AVR device doesn't support this fuse, don't want
                   to generate a verify error */
  m = avr_locate_mem(p, "lfuse");
  if (m != NULL) {
    fusegood = 0; /* By default fuse is a failure */
    if (pgm->read_byte(pgm, p, m, 0, &safemode_lfuse) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 1, lfuse value: %x\n",progname,  safemode_lfuse);
    if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 2, lfuse value: %x\n",progname,  value);
    if (value == safemode_lfuse) {
        if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
            {
            allowfuseread = 0;
            }
            avrdude_message(MSG_DEBUG, "%s: safemode read 3, lfuse value: %x\n",progname,  value);
        if (value == safemode_lfuse){
        fusegood = 1; /* Fuse read OK three times */
        }
    }
  }

    //Programmer does not allow fuse reading.... no point trying anymore
    if (allowfuseread == 0)
        {
        return -5;
        }


    if (fusegood == 0) {
        avrdude_message(MSG_INFO, "%s: safemode: Verify error - unable to read lfuse properly. "
                        "Programmer may not be reliable.\n", progname);
        return -1;
    }
    else if (fusegood == 1) {
        avrdude_message(MSG_DEBUG, "%s: safemode: lfuse reads as %X\n", progname, safemode_lfuse);
    }

  /* Read hfuse three times */
  fusegood = 2; /* If AVR device doesn't support this fuse, don't want
                   to generate a verify error */
  m = avr_locate_mem(p, "hfuse");
  if (m != NULL) {
    fusegood = 0; /* By default fuse is a failure */
    if (pgm->read_byte(pgm, p, m, 0, &safemode_hfuse) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 1, hfuse value: %x\n",progname,  safemode_hfuse);
    if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 2, hfuse value: %x\n",progname,  value);
    if (value == safemode_hfuse) {
        if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
            {
            allowfuseread = 0;
            }
            avrdude_message(MSG_DEBUG, "%s: safemode read 3, hfuse value: %x\n",progname, value);
        if (value == safemode_hfuse){
             fusegood = 1; /* Fuse read OK three times */
        }
    }
  }

    //Programmer does not allow fuse reading.... no point trying anymore
    if (allowfuseread == 0)
        {
        return -5;
        }

    if (fusegood == 0)	 {
            avrdude_message(MSG_INFO, "%s: safemode: Verify error - unable to read hfuse properly. "
                            "Programmer may not be reliable.\n", progname);
       return -2;
    }
    else if (fusegood == 1){
        avrdude_message(MSG_NOTICE, "%s: safemode: hfuse reads as %X\n", progname, safemode_hfuse);
    }

  /* Read efuse three times */
  fusegood = 2; /* If AVR device doesn't support this fuse, don't want
                   to generate a verify error */
  m = avr_locate_mem(p, "efuse");
  if (m != NULL) {
    fusegood = 0; /* By default fuse is a failure */
    if (pgm->read_byte(pgm, p, m, 0, &safemode_efuse) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 1, efuse value: %x\n",progname, safemode_efuse);
    if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
        {
        allowfuseread = 0;
        }
        avrdude_message(MSG_DEBUG, "%s: safemode read 2, efuse value: %x\n",progname,  value);
    if (value == safemode_efuse) {
        if (pgm->read_byte(pgm, p, m, 0, &value) != 0)
            {
            allowfuseread = 0;
            }
            avrdude_message(MSG_DEBUG, "%s: safemode read 3, efuse value: %x\n",progname, value);
        if (value == safemode_efuse){
             fusegood = 1; /* Fuse read OK three times */
        }
    }
  }

    //Programmer does not allow fuse reading.... no point trying anymore
    if (allowfuseread == 0)
        {
        return -5;
        }

    if (fusegood == 0) {
        avrdude_message(MSG_INFO, "%s: safemode: Verify error - unable to read efuse properly. "
                        "Programmer may not be reliable.\n", progname);
        return -3;
        }
    else if (fusegood == 1) {
        avrdude_message(MSG_NOTICE, "%s: safemode: efuse reads as %X\n", progname, safemode_efuse);
        }

  *lfuse = safemode_lfuse;
  *hfuse = safemode_hfuse;
  *efuse = safemode_efuse;
  *fuse  = safemode_fuse;

  return 0;
}


/*
 * This routine will store the current values pointed to by lfuse,
 * hfuse, and efuse into an internal buffer in this routine when save
 * is set to 1. When save is 0 (or not 1 really) it will copy the
 * values from the internal buffer into the locations pointed to be
 * lfuse, hfuse, and efuse. This allows you to change the fuse bits if
 * needed from another routine (ie: have it so if user requests fuse
 * bits are changed, the requested value is now verified 
 */
int safemode_memfuses (int save, unsigned char * lfuse, unsigned char * hfuse,
                       unsigned char * efuse, unsigned char * fuse)
{
  static unsigned char safemode_lfuse = 0xff;
  static unsigned char safemode_hfuse = 0xff;
  static unsigned char safemode_efuse = 0xff;
  static unsigned char safemode_fuse = 0xff;

  switch (save) {

    /* Save the fuses as safemode setting */
    case 1:
        safemode_lfuse = *lfuse;
        safemode_hfuse = *hfuse;
        safemode_efuse = *efuse;
        safemode_fuse  = *fuse;

        break;
    /* Read back the fuses */
    default:
        *lfuse = safemode_lfuse;
        *hfuse = safemode_hfuse;
        *efuse = safemode_efuse;
        *fuse  = safemode_fuse;
        break;
  }

  return 0;
}