mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-12-26 01:28:37 -07:00
18652068e3
- Added AD5X - Added SUNLU filaments for AD5 and AD3 series - Updated SUNLU filament & setting IDs for BBL - Updated SUNLU parameters in OrcaLibrary - Fixes & enhancements for Flashforge profiles Co-authored-by: SoftFever <softfeverever@gmail.com>
60 lines
2.9 KiB
JSON
60 lines
2.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_klipper_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"inherits": "fdm_machine_common",
|
|
"gcode_flavor": "klipper",
|
|
"machine_max_acceleration_e": ["20000", "20000"],
|
|
"machine_max_acceleration_extruding": ["50000", "50000"],
|
|
"machine_max_acceleration_retracting": ["10000", "10000"],
|
|
"machine_max_acceleration_travel": ["50000", "50000"],
|
|
"machine_max_acceleration_x": ["50000", "50000"],
|
|
"machine_max_acceleration_y": ["50000", "50000"],
|
|
"machine_max_acceleration_z": ["1000", "500"],
|
|
"machine_max_speed_e": ["100", "100"],
|
|
"machine_max_speed_x": ["2000", "2000"],
|
|
"machine_max_speed_y": ["2000", "2000"],
|
|
"machine_max_speed_z": ["15", "15"],
|
|
"machine_max_jerk_e": ["0", "0"],
|
|
"machine_max_jerk_x": ["0", "0"],
|
|
"machine_max_jerk_y": ["0", "0"],
|
|
"machine_max_jerk_z": ["0", "0"],
|
|
"machine_min_extruding_rate": ["0", "0"],
|
|
"machine_min_travel_rate": ["0", "0"],
|
|
"max_layer_height": ["0.32"],
|
|
"min_layer_height": ["0.08"],
|
|
"printable_height": "200",
|
|
"extruder_clearance_radius": "45",
|
|
"extruder_clearance_height_to_rod": "36",
|
|
"extruder_clearance_height_to_lid": "140",
|
|
"printer_settings_id": "",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"retraction_minimum_travel": ["1"],
|
|
"retract_before_wipe": ["70%"],
|
|
"retract_when_changing_layer": ["1"],
|
|
"retraction_length": ["0.5"],
|
|
"retract_length_toolchange": ["2"],
|
|
"z_hop": ["0"],
|
|
"retract_restart_extra": ["0"],
|
|
"retract_restart_extra_toolchange": ["0"],
|
|
"retraction_speed": ["30"],
|
|
"deretraction_speed": ["80"],
|
|
"z_lift_type": "NormalLift",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "",
|
|
"machine_pause_gcode": "M25",
|
|
"wipe": ["1"],
|
|
"default_filament_profile": ["Flashforge Generic ABS"],
|
|
"default_print_profile": "0.20mm Standard @Flashforge AD5M",
|
|
"bed_exclude_area": ["0x0"],
|
|
"machine_start_gcode": "BED_MESH_PROFILE LOAD=default \nM190 S[bed_temperature_initial_layer_single] ;set bed temp \nG28; \nG1 X2 Y2 Z0 F9000 ; move to corner \nM109 S[nozzle_temperature_initial_layer] ; set nozzle temp \nG1 Z0.2 F300 ; raise nozzle to 0.2\nG92 E0.0 ; reset extruder distance position\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG0 Z2\n\nG92 E0.0 ; reset extruder distance position",
|
|
"machine_end_gcode": "G91; //rel pos\nG1 E-5 f2000\nG1 Z10 F600 ; lift nozzle 10mm/s\nG1 E-29 f600\nM104 S0\nM140 S0 ; turn off bed\n\nM107\nG90\nG0 X117 Y200 F6000; move to back\nM84 ; disable motors\nDSLR_SNAPSHOT\nRSCS_off\n\nexhaustfan_on\nTIMELAPSE_RENDER\n\nG4 P60000 ; //Dwell for 1min\nM107 \nexhaustfan_off\n\nG4 P120000\n\npower_off ; //this is with moonraker",
|
|
"layer_change_gcode": ";DSLR_SNAPSHOT\nTIMELAPSE_TAKE_FRAME",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
|
"scan_first_layer": "0",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0"
|
|
}
|