3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2026-01-01 04:10:56 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 5
OrcaSlicer/resources/profiles/Snapmaker/machine/fdm_U1.json

188 lines
No EOL
6.7 KiB
JSON
Raw Blame History

{
"type": "machine",
"name": "fdm_U1",
"inherits": "fdm_toolchanger",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"single_extruder_multi_material": "0",
"bed_model": "Snapmaker U1_bed.stl",
"bed_texture": "Snapmaker U1_bed.svg",
"max_layer_height": [
"0.32",
"0.32",
"0.32",
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08",
"0.08",
"0.08",
"0.08"
],
"deretraction_speed": [
"30",
"30",
"30",
"30",
"30"
],
"extruder_colour": [
"#FCE94F",
"#FCE94F",
"#FCE94F",
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0",
"0x0",
"0x0",
"0x0"
],
"long_retractions_when_cut": [
"0",
"0",
"0",
"0",
"0"
],
"nozzle_diameter": [
"0.4",
"0.4",
"0.4",
"0.4",
"0.4"
],
"retract_before_wipe": [
"70%",
"70%",
"70%",
"70%",
"70%"
],
"retract_length_toolchange": [
"2",
"2",
"2",
"2",
"2"
],
"retract_lift_above": [
"0",
"0",
"0",
"0",
"0"
],
"retract_lift_below": [
"0",
"0",
"0",
"0",
"0"
],
"retract_lift_enforce": [
"All Surfaces",
"All Surfaces",
"All Surfaces",
"All Surfaces",
"All Surfaces"
],
"retract_restart_extra": [
"0",
"0",
"0",
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0",
"0",
"0",
"0"
],
"retract_when_changing_layer": [
"1",
"1",
"1",
"1",
"1"
],
"retraction_distances_when_cut": [
"18",
"18",
"18",
"18",
"18"
],
"retraction_length": [
"0.8",
"0.8",
"0.8",
"0.8",
"0.8"
],
"retraction_minimum_travel": [
"1",
"1",
"1",
"1",
"1"
],
"retraction_speed": [
"30",
"30",
"30",
"30",
"30"
],
"travel_slope": [
"3",
"3",
"3",
"3",
"3"
],
"wipe": [
"1",
"1",
"1",
"1",
"1"
],
"wipe_distance": [
"1",
"1",
"1",
"1",
"1"
],
"z_hop": [
"0.4",
"0.4",
"0.4",
"0.4",
"0.4"
],
"z_hop_types": [
"Normal Lift",
"Normal Lift",
"Normal Lift",
"Normal Lift",
"Normal Lift"
],
"bed_mesh_max": "267,267",
"bed_mesh_min": "3,3",
"purge_in_prime_tower": "0",
"machine_pause_gcode": "M601",
"change_filament_gcode": "",
"machine_start_gcode": ";===== machine: PR2 ========================\n;===== date: 20250717 =====================\nPRINT_START\n;===== 预热热床和第一个挤出头 =================\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\n\n;===== 粗回零 =================\nG28 X Y\nT{initial_extruder}\nM109 T{initial_extruder} S140\nG28 Z\nG90\nG0 Z10 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG4 P2000\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 自动进料 ======================\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\n\n;===== 挤出流量 ======================\n{if (is_extruder_used[0])}\nSM_PRINT_FLOW_CALIBRATE INDEX=0 TARGET_TEMP={nozzle_temperature[0]}\n{endif}\n{if (is_extruder_used[1])}\nSM_PRINT_FLOW_CALIBRATE INDEX=1 TARGET_TEMP={nozzle_temperature[1]}\n{endif}\n{if (is_extruder_used[2])}\nSM_PRINT_FLOW_CALIBRATE INDEX=2 TARGET_TEMP={nozzle_temperature[2]}\n{endif}\n{if (is_extruder_used[3])}\nSM_PRINT_FLOW_CALIBRATE INDEX=3 TARGET_TEMP={nozzle_temperature[3]}\n{endif}\n\n;===== 取出第一个挤出头 =================\nT{initial_extruder}\nSET_VELOCITY_LIMIT ACCEL=10000\nM204 S10000\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z10 F10000\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_1\nG0 Z5 F10000\nROUGHLY_CLEAN_NOZZLE\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_2\nM83\n\n;===== 第一个挤出头降温 =================\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM106 S0\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nINNER_CUTOFF_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 精回零 =================\nG28 Z\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n\n;BED_MESH_CALIBRATE PROBE_COUNT=7,7\n\n\n;======== 预挤出/划线 ================\n{if (is_extruder_used[0]) and 0 != initial_extruder}\nSM_PRINT_START_LINE INDEX=0 TARGET_TEMP={nozzle_temperature_initial_layer[0]}\nM83\nM104 S{nozzle_temperature[0] - 90}\n{endif}\n\n{if (is_extruder_used[1]) and 1 != initial_extruder}\nSM_PRINT_START_LINE INDEX=1 TARGET_TEMP={nozzle_temperature_initial_layer[1]}\nM83\nM104 S{nozzle_temperature[1] - 90}\n{endif}\n\n{if (is_extruder_used[2]) and 2 != initial_extruder}\nSM_PRINT_START_LINE INDEX=2 TARGET_TEMP={nozzle_temperature_initial_layer[2]}\nM83\nM104 S{nozzle_temperature[2] - 90}\n{endif}\n\n{if (is_extruder_used[3]) and 3 != initial_extruder}\nSM_PRINT_START_LINE INDEX=3 TARGET_TEMP={nozzle_temperature_initial_layer[3]}\nM83\nM104 S{nozzle_temperature[3] - 90}\n{endif}\n\n{if (is_extruder_used[initial_extruder])}\nSM_PRINT_START_LINE INDEX={initial_extruder} TARGET_TEMP={nozzle_temperature_initial_layer[initial_extruder]}\n{endif}\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} T{initial_extruder}\nM106 S0\n\nTIMELAPSE_START",
"scan_first_layer": "0",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0"
}
Reference in a new issue View git blame Copy permalink