{
    "type": "process",
    "name": "0.20mm Standard @FF G4P",
    "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
    "from": "system",
    "instantiation": "true",
    "bottom_solid_infill_flow_ratio": "0.98",
    "bridge_flow": "0.98",
    "bridge_speed": "15",
    "brim_type": "auto_brim",
    "elefant_foot_compensation": "0.1",
    "enable_arc_fitting": "1",
    "enable_prime_tower": "1",
    "exclude_object": "1",
    "filter_out_gap_fill": "0.1",
    "compatible_printers": [
        "Flashforge Guider4 Pro 0.4 nozzle"
    ],
    "gap_fill_target": "topbottom",
    "infill_wall_overlap": "15%",
    "initial_layer_print_height": "0.25",
    "initial_layer_speed": "60",
    "internal_bridge_flow": "0.98",
    "max_travel_detour_distance": "300",
    "only_one_wall_top": "1",
    "prime_tower_brim_width": "5",
    "prime_tower_width": "30",
    "prime_volume": "40",
    "print_settings_id": "0.20mm Standard @FF G4P",
    "seam_gap": "5%",
    "skirt_loops": "0",
    "slowdown_for_curled_perimeters": "0",
    "small_perimeter_speed": "10",
    "support_interface_bottom_layers": "0",
    "support_interface_spacing": "0.2",
    "support_type": "tree(auto)",
    "top_solid_infill_flow_ratio": "0.98",
    "travel_acceleration": "30000",
    "travel_speed": "600",
    "wipe_tower_cone_angle": "10",
    "wipe_tower_extra_spacing": "110%"
}