{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_technology": "FFF",
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "gcode_flavor": "klipper",
    "silent_mode": "1",
    "machine_max_acceleration_e": [
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "5000"
    ],
    "machine_max_acceleration_retracting": [
        "5000"
    ],
    "machine_max_acceleration_x": [
        "3500"
    ],
    "machine_max_acceleration_y": [
        "3500"
    ],
    "machine_max_acceleration_z": [
        "500"
    ],
    "machine_max_speed_e": [
        "120"
    ],
    "machine_max_speed_x": [
        "500"
    ],
    "machine_max_speed_y": [
        "500"
    ],
    "machine_max_speed_z": [
        "150"
    ],
    "machine_max_jerk_e": [
        "2.5"
    ],
    "machine_max_jerk_x": [
        "10"
    ],
    "machine_max_jerk_y": [
        "10"
    ],
    "machine_max_jerk_z": [
        "2"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.3"
    ],
    "min_layer_height": [
        "0.1"
    ],
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "printer_settings_id": "",
    "retraction_minimum_travel": [
        "2"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "7"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "0.8"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "80"
    ],
    "deretraction_speed": [
        "40"
    ],
    "single_extruder_multi_material": "0",
    "change_filament_gcode": "",
    "z_lift_type": "NormalLift",
    "default_print_profile": "",
    "nozzle_type": "undefine",
    "auxiliary_fan": "0",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_pause_gcode": "",
    "machine_start_gcode": "M104 S[nozzle_temperature_initial_layer] ; set temp\nG28\nM109 S[nozzle_temperature_initial_layer] ; wait for temp\nG28\nG91 ; relative positioning\nG1 Z-40 F4000\nG90 ; absolute positioning\n",
    "machine_end_gcode": "G28\nM104 S0\nM84 ; disable motors"
}