Bambu Studio - en to en translation catalogue (646 entries)

en:  is too close to exclusion area, and collisions will be caused.
en:  is too close to an exclusion area, and collisions will be caused.

en:  is too close to others, there may be collisions when printing.
en:  is too close to others; there may be collisions when printing.

en: "Fix Model" feature is currently only on Windows. Please repair the model on Bambu Studio(windows) or CAD softwares.
en: The "Fix Model" feature is currently only on Windows. Please repair the model in Bambu Studio (Windows) or CAD software.

en: %1% is too close to exclusion area, there may be collisions when printing.
en: %1% is too close to exclusion area. There may be collisions when printing.

en: %s can't be percentage
en: %s can’t be a percentage

en: %s is not supported by AMS.
en: %s is not supported by the AMS.

en: 3D Scene Operations
    Did you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?
en: 3D Scene Operations
    Do you know how to control view and object/part selection with mouse and touch panel in the 3D scene?

en: A G-code path goes beyond the boundary of plate.
en: A G-code path goes beyond plate boundaries.

en: A config exists with the same name: %s, do you want to override it.
en: A config exists with the same name: %s. Do you want to override it?

en: A desiccant status lower than two bars indicates that desiccant may be inactive. Please change the desiccant.(The bars: higher the better.)
en: A desiccant status lower than two bars indicates that desiccant may be inactive. Please change the desiccant. (The higher, the better.)

en: A error occurred. Maybe memory of system is not enough or it's a bug of the program
en: An error occurred. The system may have run out of memory, or a bug may have occurred.

en: A file exists with the same name: %s, do you want to override it.
en: A file exists with the same name: %s. Do you want to override it?

en: A gap between innermost brim line and object can make brim be removed more easily
en: This creates a gap between the innermost brim line and the object and can make the brim easier to remove.

en: A new Network plug-in(%s) available, Do you want to install it?
en: A new network plug-in (%s) is available. Do you want to install it?

en: A new configuration package available, Do you want to install it?
en: A new configuration package is available. Do you want to install it?

en: AMS filaments
en: AMS filament

en: AMS will continue to another spool with the same properties of filament automatically when current filament runs out
en: AMS will continue to another spool with the same filament properties automatically when current filament runs out.

en: Abnormal print file data. Please slice again.
en: Abnormal print file data: please slice again.

en: Acceleration of initial layer. Using a lower value can improve build plate adhensive
en: This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion.

en: Acceleration of outer wall. Using a lower value can improve quality
en: Acceleration of outer wall: using a lower value can improve quality.

en: Acceleration of top surface infill. Using a lower value may improve top surface quality
en: This is the acceleration of top surface infill. Using a lower value may improve top surface quality.

en: Add detail
en: Add Detail

en: Add modifier
en: Add Modifier

en: Add negative part
en: Add Negative Part

en: Add part
en: Add Part

en: Add plate
en: Add Plate

en: Add settings
en: Add Settings

en: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)
en: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers).

en: Add support blocker
en: Add Support Blocker

en: Add support enforcer
en: Add Support Enforcer

en: Add/Remove filaments
en: Add/Remove filament

en: Advance
en: Advanced

en: All changes will not be saved
en: No changes will be saved.

en: All solid layer
en: All solid layers

en: All the selected objects are on the locked plate,
    We can not do auto-arrange on these objects.
en: All the selected objects are on a locked plate.
    Cannot auto-arrange these objects.

en: All the selected objects are on the locked plate,
    We can not do auto-orient on these objects.
en: All the selected objects are on a locked plate,
    We cannot auto-orient these objects.

en: Along X axis
en: Along X Axis

en: Along Y axis
en: Along Y Axis

en: Along Z axis
en: Along Z Axis

en: Already did a synchronization, do you want to sync only changes or resync all?
en: Already did a synchronization; do you want to sync only changes or resync all?

en: Ams filament backup
en: AMS filament backup

en: An SD card needs to be inserted before printing via LAN.
en: A MicroSD card needs to be inserted before printing via LAN.

en: An SD card needs to be inserted before printing.
en: A MicroSD card needs to be inserted before printing.

en: An SD card needs to be inserted before send to printer SD card.
en: A MicroSD card needs to be inserted before sending to the printer SD card.

en: An SD card needs to be inserted before sending to printer.
en: A MicroSD card needs to be inserted before sending to printer.

en: An SD card needs to be inserted to record timelapse.
en: A MicroSD card needs to be inserted to record a timelapse.

en: An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Upgrade firmware'.
en: An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'.

en: An object is laid over the boundary of plate or exceeds the height limit.
    Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.
en: An object is laid over the boundary of the plate or exceeds the height limit.
    Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.

en: An object is layed over the boundary of plate.
en: An object is laid over the boundary of the plate.

en: Angle for sparse infill pattern, which controls the start or main direction of line
en: This is the angle for sparse infill pattern, which controls the start or main direction of lines.

en: Application is closing
en: Closing application

en: Are you sure to %1% the selected preset?
en: Are you sure you want to %1% the selected preset?

en: Arranging is done but there are unpacked items. Reduce spacing and try again.
en: Arranging complete, but some items were not able to be arranged. Reduce spacing and try again.

en: Assemble Control
en: Assembly Control

en: Assemble the selected objects to an object with multiple parts
en: Assemble the selected objects into an object with multiple parts

en: Assemble the selected objects to an object with single part
en: Assemble the selected objects into an object with single part

en: Associate .3mf files to BambuStudio
en: Associate .3mf files to Bambu Studio

en: Associate .step/.stp files to BambuStudio
en: Associate .step/.stp files to Bambu Studio

en: Associate .stl files to BambuStudio
en: Associate .stl files to Bambu Studio

en: Associate files to BambuStudio
en: Associate files to Bambu Studio

en: Auto Orientation options
en: Auto orientation options

en: Auto orient
en: Auto Orient

en: Auto orientates selected objects or all objects.If there are selected objects, it just orientates the selected ones.Otherwise, it will orientates all objects in the current disk.
en: This auto orients selected objects or all objects. If there are selected objects, it just orients the selected ones. Otherwise, it will orient all objects in the current plate.

en: Auto sync user presets(Printer/Filament/Process)
en: Auto sync user presets (Printer/Filament/Process)

en: Auto-Arrange
    Did you know that you can auto-arrange all objects in your project?
en: Auto-Arrange
    Did you know that you can auto-arrange all the objects in your project?

en: Auto-Orient
    Did you know that you can rotate objects to an optimal orientation for printing by a simple click?
en: Auto-Orient
    Did you know that you can rotate objects to an optimal orientation for printing with a simple click?

en: Auto-recovery from step loss
en: Auto-recover from step loss

en: Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed with original layer height.
en: Automatically combine sparse infill of several layers to print together in order to reduce time. Walls are still printed with original layer height.

en: Avoid crossing wall
en: Avoid crossing walls

en: Avoid crossing wall - Max detour length
en: Avoid crossing walls - Max detour length

en: Backup your project periodically for restoring from the occasional crash.
en: Backup your project periodically to help with restoring from an occasional crash.

en: Bamabu Engineering Plate
en: Bambu Engineering Plate

en: Bamabu High Temperature Plate
en: Bambu High Temperature Plate

en: Bambu Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community
en: Bambu Studio is based on PrusaSlicer by Prusa Research, which is based on Slic3r by Alessandro Ranellucci and the RepRap community

en: BambuStudio configuration file may be corrupted and is not abled to be parsed.Please delete the file and try again.
en: Bambu Studio configuration file is not able to be parsed and may be corrupted. Please delete the file and try again.

en: BambuStudio will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened.
en: A localization error has occurred, and Bambu Studio will close.

en: BambuStudio will terminate because of running out of memory.It may be a bug. It will be appreciated if you report the issue to our team.
en: Bambu Studio has run out of memory and will close. This may be a bug. Please report this error to Technical Support.

en: Bed Leveling
en: Bed leveling

en: Bed Type
en: Plate Type

en: Bed adhension
en: Bed adhesion

en: Bed exclude area
en: Excluded bed area

en: Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Cool Plate
en: This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate.

en: Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Engineering Plate
en: This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Engineering Plate.

en: Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the High Temp Plate
en: This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the High Temp Plate.

en: Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Textured PEI Plate
en: Bed temperature after the first layer. 0 means the filament is not supported on the Textured PEI Plate.

en: Bed temperature is higher than vitrification temperature of this filament.
    This may cause nozzle blocked and printing failure
    Please keep the printer open during the printing process to ensure air circulation or reduce the temperature of the hot bed
en: Bed temperature is higher than vitrification temperature of this filament.
    This may cause nozzle blockage and print failure.
    Please keep the printer open during the printing process to ensure air circulation or reduce the temperature of the hot bed.

en: Bed temperature of other layer is lower than bed temperature of initial layer for more than %d degree centigrade.
    This may cause model broken free from build plate during printing
en: The bed temperature of other layers is lower than the bed temperature of the first layer by more than %d degrees centigrade.
    This may cause models to break free from the build plate during printing.

en: Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Cool Plate
en: This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate.

en: Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Engineering Plate
en: This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate.

en: Bed temperature of the initial layer. Value 0 means the filament does not support to print on the High Temp Plate
en: This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate.

en: Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Textured PEI Plate
en: Bed temperature of the first layer 0 means the filament is not supported on the Textured PEI Plate.

en: Bed temperature when Textured PEI Plate is installed. Value 0 means the filament does not support to print on the Textured PEI Plate
en: Bed temperature when Textured PEI Plate is installed. 0 means the filament is not supported on the Textured PEI Plate

en: Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Cool Plate
en: This is the bed temperature when the cool plate is installed. A value of 0 means the filament does not support printing on the Cool Plate.

en: Bed temperature when engineering plate is installed. Value 0 means the filament does not support to print on the Engineering Plate
en: This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate.

en: Bed temperature when high temperature plate is installed. Value 0 means the filament does not support to print on the High Temp Plate
en: This is the bed temperature when the high temperature plate is installed. A value of 0 means the filament does not support printing on the High Temp Plate.

en: Bed type
en: Plate type

en: Bed types supported by the printer
en: Plate types supported by the printer

en: Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180°for zero angle.
en: Bridging angle override. 0 means the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180° for zero angle.

en: Brim for better adhesion
    Did you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?
en: Brim for better adhesion
    Did you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?

en: Calibrating the micro lida
en: Calibrating the micro lidar

en: Can not add models when in preview mode!
en: Unable to add models in preview mode

en: Can not print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing
en: Unable to print multiple filaments which have large temperature differences together. Otherwise, the extruder and nozzle may be blocked or damaged during printing.

en: Can't apply when proccess preview.
en: Unable to apply when processing preview

en: Can't find my devices?
en: Can't find devices?

en: Can't start this without SD card.
en: Can't start without MicroSD card.

en: Cancelled
en: Canceled

en: Cannot read filament info: the filament is loaded to the tool head,please unload the filament and try again.
en: Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again.

en: Cannot send the print job for empty plate
en: Cannot send a print job for an empty plate.

en: Cannot send the print job to a printer whose firmware is required to get updated.
en: Cannot send the print job to a printer whose firmware must be updated.

en: Cannot send the print job when the printer is updating firmware
en: Cannot send a print job while the printer is updating firmware

en: Cannot send the print task when the upgrade is in progress
en: Cannot send print tasks when an update is in progress

en: Change these settings automatically? 
    Yes - Change these settings and enable spiral mode automatically
    No  - Give up using spiral mode this time
en: Change these settings automatically? 
    Yes - Change these settings and enable spiral/vase mode automatically
    No  - Cancel enabling spiral mode

en: Change these settings automatically? 
    Yes - Change these settings automatically
    No  - Do not change these settings for me
en: Change these settings automatically? 
    Yes - Change these settings automatically.
    No  - Do not change these settings for me.

en: Change type
en: Change Type

en: Changing the region will log out your account.
en: Changing the region will log you out of your account.

en: Check for Update
en: Check for Updates

en: Check the current status of the bambu server by clicking on the link above.
en: Check the current status of the Bambu Lab server by clicking on the link above.

en: Choose an AMS slot then press "Load" or "Unload" button to automatically load or unload filiament.
en: Choose an AMS slot then press "Load" or "Unload" to automatically load or unload filament.

en: Choose one file (gcode/.gco/.g/.ngc/ngc):
en: Choose one file (.gcode/.gco/.g/.ngc/ngc):

en: Classic wall generator produces walls with constant extrusion width and for very thin areas is used gap-fill. Arachne engine produces walls with variable extrusion width
en: The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width.

en: Clearance radius around extruder. Used for collision avoidance in by-object printing.
en: Clearance radius around extruder: used for collision avoidance in by-object printing.

en: Click OK to update the Network plug-in when Bambu Studio launches next time.
en: Click OK to update the Network plug-in the next time Bambu Studio launches.

en: Click the icon to edit color painting of the object
en: Click the icon to edit color painting for the object

en: Click the icon to toggle printable property of the object
en: Click the icon to toggle printable properties of the object

en: Click to drop current modify and reset to saved value.
en: Click to drop current modifications and reset to saved value.

en: Click to pick filament color
en: Click to select filament color

en: Clone selected
en: Clone Selected

en: Close all cooling fan for the first certain layers. Cooling fan of the first layer used to be closed to get better build plate adhesion
en: Turn off all cooling fans for the first few layers. This can be used to improve bed adhesion.

en: Color Painting
en: Color painting

en: Color Scheme
en: Color scheme

en: Color painting
en: Color Painting

en: Colour
en: Color

en: Config which AMS slot should be used for a filament used in the print job
en: Configure which AMS slot should be used for a filament used in the print job.

en: Configuration can update now.
en: A new configuration is available. Update now?

en: Configuration file "%1%" was loaded, but some values were not recognized.
en: The configuration file “%1%” was loaded, but some values were not recognized.

en: Configuration package was loaded, but some values were not recognized.
en: The configuration package was loaded, but some values were not recognized.

en: Conflicts of gcode paths have been found at layer %d. Please separate the conflicted objects farther (%s <-> %s).
en: Conflicts of gcode paths have been found at layer %d. Please separate the conflicting objects further (%s <-> %s).

en: Connect a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line.
en: This connects a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line.

en: Connect a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring.
en: This connects a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring.

en: Connect failed [%d]!
en: Connection failed [%d]!

en: ConnectPrinter(LAN)
en: Connect Printer (LAN)

en: Contour of object will be grown or shrunk in XY plane by the configured value. Positive value makes contour bigger. Negative value makes contour smaller. This function is used to adjust size slightly when the object has assembling issue
en: The contour of objects will be grown or shrunk in the XY plane by the set value. Positive values make contours bigger, and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues.

en: Convert from inch
en: Convert from Inches

en: Convert from meter
en: Convert from Meters

en: Copying of the temporary G-code to the output G-code failed
en: Copying of the temporary G-code to the output G-code failed.

en: Cover the top contact layer of the supports with loops. Disabled by default.
en: This covers the top contact layer of the supports with loops. It is disabled by default.

en: DEBUG settings have saved successfully!
en: Debug settings have been saved successfully!

en: Decrease this value slightly(for example 0.9) to reduce the amount of material for bridge, to improve sag
en: Decrease this value slightly (for example 0.9) to reduce the amount of material extruded for bridges to avoid sagging.

en: Default filament profile when switch to this machine profile
en: Default filament profile when switching to this machine profile

en: Default line width if some line width is set to be zero
en: Default line width for line widths set to 0

en: Default process profile when switch to this machine profile
en: Default process profile when switching to this machine profile

en: Delete all
en: Delete All

en: Delete selected
en: Delete Selected

en: Density of internal sparse infill, 100% means solid throughout
en: This is the density of internal sparse infill. 100% means that the object will be solid throughout.

en: Density of the first raft or support layer
en: This is the density of the first raft or support layer.

en: Deretraction Speed
en: Deretraction speed

en: Deselect all
en: Deselect All

en: Detail.
en: More

en: Detect overhang wall
en: Detect overhang walls

en: Detect the overhang percentage relative to line width and use different speed to print. For 100%% overhang, bridge speed is used.
en: This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used.

en: Detect thin wall
en: Detect thin walls

en: Detect thin wall which can't contain two line width. And use single line to print. Maybe printed not very well, because it's not closed loop
en: This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop.

en: Detour and avoid to travel across wall which may cause blob on surface
en: This detours to avoid traveling across walls, which may cause blobs on the surface

en: Develop mode
en: Developer mode

en: Diameter of nozzle
en: The diameter of the nozzle

en: Different types of supports
    Did you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
en: Different types of supports
    Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!

en: Discard or Keep changes
en: Discard or keep changes

en: Discribe how long the nozzle will move along the last path when retracting
en: This describes how long the nozzle will move along the last path while retracting.

en: Distance from model to the outermost brim line
en: This is the distance from the model to the outermost brim line.

en: Distance from skirt to brim or object
en: This is the distance from the skirt to the brim or the object.

en: Distance of the nozzle tip to the lid. Used for collision avoidance in by-object printing.
en: Distance from the nozzle tip to the lid. Used for collision avoidance in by-object printing.

en: Distance of the nozzle tip to the lower rod. Used for collision avoidance in by-object printing.
en: Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing.

en: Do not recommend bed temperature of other layer to be lower than initial layer for more than this threshold. Too low bed temperature of other layer may cause the model broken free from build plate
en: It is not recommend for bed temperature of other layers to be lower than the first layer by more than this threshold. Too low bed temperature of other layer may cause the model to break free from the build plate.

en: Do not run any validity checks, such as gcode path conflicts check.
en: Do not run any validity checks, such as G-code path conflicts check.

en: Do you want to synchronize your personal data from Bambu Cloud? 
    It contains the following information:
    1. The Process presets
    2. The Filament presets
    3. The Printer presets
en: Do you want to synchronize your personal data from Bambu Cloud? 
    It contains the following information:
    1. Process presets
    2. Filament presets
    3. Printer presets

en: Don't create support on model surface, only on build plate
en: This setting only generates supports that begin on the build plate.

en: Don't remind me of this version again
en: Don't remind me about this version again.

en: Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower
en: Don't retract when the travel is entirely in an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generation slower.

en: Don't support the whole bridge area which make support very large. Bridge usually can be printing directly without support if not very long
en: This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance.

en: Dynamic flow Calibration
en: Dynamic flow calibration

en: Embeded
en: Embedded

en: Embeded
    depth
en: Embedded depth

en: Enable Dark mode
en: Enable Dark Mode

en: Enable support generation.
en: This enables support generation.

en: Enable this option if machine has auxiliary part cooling fan
en: Enable this option if the machine has an auxiliary part cooling fan

en: Enable this option to optimize part cooling fan speed for overhang and bridge to get better cooling
en: Enable this option to optimize the part cooling fan speed for overhangs and bridges to get better cooling

en: Enable this option to slow printing down for different overhang degree
en: Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below.

en: Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in "Max fan speed threshold", so that layer can be cooled for longer time. This can improve the cooling quality for needle and small details
en: Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in "Max fan speed threshold", so that the layer can be cooled for a longer time. This can improve the quality for small details.

en: Enable this to add line number(Nx) at the beginning of each G-Code line
en: Enable this to add line number(Nx) at the beginning of each G-Code line.

en: Enable this to enable the camera on printer to check the quality of first layer
en: Enable this to allow the camera on the printer to check the quality of the first layer.

en: Enable this to get a G-code file which has G2 and G3 moves. And the fitting tolerance is same with resolution
en: Enable this to get a G-code file with G2 and G3 moves. The fitting tolerance is the same as the resolution.

en: End G-code when finish the printing of this filament
en: Add end G-code when finishing the printing of this filament.

en: End G-code when finish the whole printing
en: Add end G-Code when finishing the entire print.

en: Error during replace
en: Error during replacement

en: Error occurs while loading G-code file
en: An Error has occurred while loading the G-code file.

en: Error! Invalid model
en: Error: invalid model

en: Error! Unable to create thread!
en: Error. Unable to create thread.

en: Expand all raft layers in XY plane
en: This expands all raft layers in XY plane.

en: Expand the first raft or support layer to improve bed plate adhesion
en: This expands the first raft or support layer to improve bed adhesion.

en: Export 3MF
en: Export 3mf

en: Export all objects as STL
en: Export All Objects as STL

en: Export project as 3MF.
en: This exports the project as a 3mf file.

en: Export result
en: Export Result

en: Export settings to a file.
en: This exports settings to a file.

en: Export slicing data to a folder.
en: Export slicing data to a folder

en: Export successfully.
en: Exported successfully

en: Exporting.
en: Exporting

en: Extruders count
en: Extruder count

en: Extrusion Width
en: Extrusion width

en: Failed processing of the filename_format template.
en: Processing of the filename_format template failed.

en: Failed to calculate line width of %1%. Can not get value of "%2%"
en: Failed to calculate line width of %1%. Cannot get value of “%2%”

en: Failed to download the plug-in. Please check your firewall settings and vpn software, check and retry.
en: Failed to download the plug-in. Please check your firewall settings and vpn software and retry.

en: Failed to fetching model infomations from printer.
en: Failed to fetch model infomation from printer.

en: Failed to generate gcode for invalid custom G-code.
en: Failed to generate G-code for invalid custom G-code.

en: Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software.
en: Failed to install the plug-in. Please check whether it is blocked or has been deleted by anti-virus software.

en: Failed to parse model infomations.
en: Failed to parse model infomation

en: Failed to repair folowing model object | Failed to repair folowing model objects
en[0]: Failed to repair the following model object
en[1]: Failed to repair the following model objects

en: Failed to save gcode file.
    Error message: %1%.
    Source file %2%.
en: Failed to save G-code file.
    Error message: %1%.
    Source file %2%.

en: Failed to save the project.
    Please check whether the folder exists online or if other programs open the project file.
en: Failed to save the project.
    Please check whether the folder exists online or if other programs have the project file open.

en: Failed to start printing job
en: Failed to start print job

en: Failed to upload print file to FTP. Please check the network status and try again.
en: Failed to upload print file via FTP. Please check the network status and try again.

en: Fan Speed (%)
en: Fan speed (%)

en: Fan speed for overhang
en: Fan speed for overhangs

en: Fatal error, exception catched: %1%
en: Fatal error, exception: %1%

en: Fetching model infomations ...
en: Fetching model information...

en: Filament Changes
en: Filament changes

en: Filament Settings
en: Filament settings

en: Filament count exceeds the maximum number that painting tool supports. only the first %1% filaments will be available in painting tool.
en: Filament count exceeds the maximum number that painting tool supports. Only the first %1% filaments will be available in painting tool.

en: Filament density. For statistics only
en: Filament density, for statistical purposes only.

en: Filament diameter is used to calculate extrusion in gcode, so it's important and should be accurate
en: Filament diameter is used to calculate extrusion variables in G-code, so it is important that this is accurate and precise.

en: Filament price. For statistics only
en: Filament price, for statistical purposes only.

en: Filament to print internal sparse infill.
en: This is the filament for printing internal sparse infill.

en: Filament to print support base and raft. "Default" means no specific filament for support and current filament is used
en: Filament to print support bases and rafts. "Default" means no specific filament for support, and current filament is used

en: Filament to print support interface. "Default" means no specific filament for support interface and current filament is used
en: Filament to print support interfaces. "Default" means no specific filament for support interface, and current filament is used

en: Filaments Auto refill
en: Filament Auto-refill

en: File for the replace wasn't selected
en: File for the replacement wasn't selected

en: Fix model
en: Fix Model

en: Flow Calibration
en: Flow calibration

en: Flush into support/objects/infill
    Did you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?
en: Flush into support/objects/infill
    Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?

en: Following line %s contains reserved keywords.
    Please remove it, or will beat G-code visualization and printing time estimation. | Following lines %s contain reserved keywords.
    Please remove them, or will beat G-code visualization and printing time estimation.
en[0]: Following line %s contains reserved keywords.
    Please remove it, or G-code visualization and print time estimation will be broken.
en[1]: Following lines %s contain reserved keywords.
    Please remove them, or G-code visualization and print time estimation will be broken.

en: Following model object has been repaired | Following model objects have been repaired
en[0]: The following model object has been repaired
en[1]: The following model objects have been repaired

en: Following preset will be deleted too. | Following presets will be deleted too.
en[0]: The following preset will be deleted too:
en[1]: The following presets will be deleted too:

en: Force a retraction when changes layer
en: This forces a retraction on layer changes.

en: Force cooling fan to be specific speed when overhang degree of printed part exceeds this value. Expressed as percentage which indicides how much width of the line without support from lower layer. 0% means forcing cooling for all outer wall no matter how much overhang degree
en: Force cooling fan to be a specific speed when overhang degree of printed part exceeds this value. This is expressed as a percentage which indicates how much width of the line without support from lower layer. 0% means forcing cooling for all outer wall no matter the overhang degree.

en: Force cooling for overhang and bridge
en: Force cooling for overhangs and bridges

en: Force part cooling fan to be this speed when printing bridge or overhang wall which has large overhang degree. Forcing cooling for overhang and bridge can get better quality for these part
en: Force part cooling fan to be this speed when printing bridges or overhang walls which have a large overhang degree. Forcing cooling for overhangs and bridges can achieve better quality for these parts.

en: Fuzzy Skin
en: Fuzzy skin

en: G-code files can not be loaded with models together!
en: G-code files and models cannot be loaded together!

en: G-code path is genereated after simplifing the contour of model to avoid too much points and gcode lines in gcode file. Smaller value means higher resolution and more time to slice
en: The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice.

en: Gcode path overlap
en: G-code path overlap

en: Get ticket from device timeout
en: Timeout getting ticket from device

en: Get ticket from server timeout
en: Timeout getting ticket from server

en: Goto download page.
en: Go to download page

en: Green means that AMS humidity is normal, orange represent humidity is high, red represent humidity is too high.(Hygrometer: lower the better.)
en: Green means that AMS humidity is normal, orange means that humidity is high, and red means that humidity is too high. (Hygrometer: the lower, the better.)

en: Group Operations
en: Group operations

en: Height of initial layer. Making initial layer height to be thick slightly can improve build plate adhension
en: This is the height of the first layer. Making the first layer height thicker can improve build plate adhesion.

en: Height range Modifier
en: Height Range Modifier

en: Highlight overhang areas
en: Highlight overhangs

en: Holes of object will be grown or shrunk in XY plane by the configured value. Positive value makes holes bigger. Negative value makes holes smaller. This function is used to adjust size slightly when the object has assembling issue
en: Holes in objects will be grown or shrunk in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust size slightly when objects have assembly issues.

en: How many layers of skirt. Usually only one layer
en: Number of skirt layers: usually only one

en: If enable this setting, part cooling fan will never be stoped and will run at least at minimum speed to reduce the frequency of starting and stoping
en: Enabling this setting means that part cooling fan will never stop entirely and will instead run at least at minimum speed to reduce the frequency of starting and stopping.

en: If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances.
en: If enabled, bridges are more reliable and can bridge longer distances but may look worse. If disabled, bridges look better but are reliable only for shorter distances.

en: If enabled, sets BambuStudio as default application to open .3mf files
en: If enabled, this sets Bambu Studio as the default application to open .3mf files.

en: If enabled, sets BambuStudio as default application to open .step files
en: If enabled, this sets Bambu Studio as the default application to open .step files.

en: If enabled, sets BambuStudio as default application to open .stl files
en: If enabled, this sets Bambu Studio as the default application to open .stl files.

en: If first selected item is a part, the second one should be part in the same object.
en: If the first selected item is a part, the second one should be a part in the same object.

en: If first selected item is an object, the second one should also be object.
en: If the first selected item is an object, the second one should also be an object.

en: If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, prime tower is required for smooth mode to wipe nozzle.
en: If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle.

en: If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and variables of settings also can be read
en: If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed via the absolute path to the G-code file as the first argument, and variables of settings can also be read

en: Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails.
en: Ignore HTTPS certificate revocation checks in the case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails.

en: In Cloud Slicing Queue, there are %s tasks ahead.
en: In Cloud Slicing Queue, there are %s tasks ahead of you.

en: Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill
en: This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to line width of sparse infill.

en: Infill/Wall overlap
en: Infill/wall overlap

en: Initial layer
en: First layer

en: Initial layer bed temperature
en: First layer bed temperature

en: Initial layer density
en: First layer density

en: Initial layer expansion
en: First layer expansion

en: Initial layer height
en: First layer height

en: Initial layer infill
en: First layer infill

en: Initial layer nozzle temperature
en: First layer nozzle temperature

en: Initial layer speed
en: First layer speed

en: Initialize failed (%s)!
en: Initialization failed (%s)!

en: Initialize failed (Device connection not ready)!
en: Initialization failed (Device connection not ready)!

en: Initialize failed (Missing LAN ip of printer)!
en: Initialization failed (Missing LAN IP of printer)!

en: Initialize failed (No Camera Device)!
en: Initialization failed (No Camera Device)!

en: Initialize failed (No Device)!
en: Initialization failed (No Device)!

en: Initialize failed (Not accessible in LAN-only mode)!
en: Initialization failed (Not accessible in LAN-only mode)!

en: Install successfully.
en: Installed successfully

en: Interface use loop pattern
en: Loop pattern interface

en: Invalid input.
en: Invalid input

en: Invalid state. 
    No one part is selected for keep after cut
en: Invalid state. 
    No one part is selected to keep after cut

en: Ironing Type
en: Ironing type

en: Ironing is using small flow to print on same height of surface again to make flat surface more smooth. This setting controls which layer being ironed
en: Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed.

en: Jump to Layer
en: Jump to layer

en: Last Step
en: Back

en: Lay on face
en: Lay on Face

en: Layer Height (mm)
en: Layer height (mm)

en: Layer height cannot exceed nozzle diameter
en: Layer height cannot exceed nozzle diameter.

en: Layer range Settings to modify
en: Layer Range Settings to Modify

en: Line Width (mm)
en: Line width (mm)

en: Line pattern for internal sparse infill
en: This is the line pattern for internal sparse infill.

en: Line pattern of bottom surface infill, not bridge infill
en: This is the line pattern of bottom surface infill, not including bridge infill.

en: Line pattern of support
en: This is the line pattern for support.

en: Line pattern of support interface. Default pattern for non-soluble support interface is Rectilinear, while default pattern for soluble support interface is Concentric
en: This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric.

en: Line pattern of top surface infill
en: This is the line pattern for top surface infill.

en: Line width of initial layer
en: Line width of first layer

en: Line width of inner wall
en: Line width of inner walls

en: Load Filament
en: Load

en: Load failed [%d]!
en: Loading failed [%d]!

en: Loading G-codes
en: Loading G-code

en: Loading of a model file failed.
en: Loading of model file failed.

en: Machine gcode
en: Machine G-code

en: Material becomes soft at this temperature. Thus the heatbed cannot be hotter than this tempature
en: Material becomes soft at this temperature. Thus, the heat bed cannot be hotter than this temperature.

en: Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported.
en: This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported.

en: Maximum detour distance for avoiding crossing wall. Don't detour if the detour distance is large than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable
en: Maximum detour distance for avoiding crossing wall: The printer won't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. A value of 0 will disable this.

en: Maximum printable height which is limited by mechanism of printer
en: This is the maximum printable height which is limited by the height of the build area.

en: Maybe parts of the object at these height are too thin, or the object has faulty mesh
en: Parts of the object at these heights may be too thin or the object may have a faulty mesh.

en: Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC.
en: Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC.

en: Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum feature size will be widened to the Minimum wall width. It's expressed as a percentage over nozzle diameter
en: Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the minimum feature size will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter

en: Mirror Object
en: Mirror object

en: Mirror along the X axis
en: Mirror along the X Axis

en: Mirror along the Y axis
en: Mirror along the Y Axis

en: Mirror along the Z axis
en: Mirror along the Z Axis

en: Mouse wheel reverses when zooming
en: Reverse scroll direction while zooming

en: Move Object
en: Move object

en: Move nozzle along the last extrusion path when retracting to clean leaked material on nozzle. This can minimize blob when print new part after travel
en: This moves the nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling.

en: Move of view
en: Pan View

en: Move selection 10 mm in negative X direction
en: Move selection 10mm in negative X direction

en: Move selection 10 mm in negative Y direction
en: Move selection 10mm in negative Y direction

en: Move selection 10 mm in positive X direction
en: Move selection 10mm in positive X direction

en: Move selection 10 mm in positive Y direction
en: Move selection 10mm in positive Y direction

en: Movement step set to 1 mm
en: Movement step set to 1mm

en: Name of components inside step file is not UTF8 format!
en: Component name(s) inside step file not in UTF8 format!

en: Need to check the unsaved changes before configuration updates.
en: Please check any unsaved changes before updating the configuration.

en: New network plug-in available.
en: New network plug-in available

en: No SD Card
en: No MicroSD Card

en: No object can be printed. Maybe too small
en: No object can be printed. It may be too small.

en: Normal Support expansion
en: Normal support expansion

en: Note: The preparation may takes several minutes. Please be patiant.
en: Note: The preparation may take several minutes. Please be patient.

en: Note: if new filament is inserted during  printing, the AMS will not automatically read any information until printing is completed.
en: Note: if new filament is inserted during  printing, the AMS will not automatically read any information until printing has finished.

en: Nozzle may be blocked when the temperature is out of recommended range.
    Please make sure whether to use the temperature to print.
en: The nozzle may become clogged when the temperature is out of the recommended range.
    Please make sure whether to use this temperature to print.

en: Nozzle temperature for layers after the initial one
en: Nozzle temperature after the first layer

en: Nozzle temperature to print initial layer when using this filament
en: Nozzle temperature for printing the first layer with this filament

en: Number of loops for the skirt. Zero means disabling skirt
en: This is the number of loops for the skirt. 0 means the skirt is disabled.

en: Number of top interface layers
en: This is the number of top interface layers.

en: Number of walls of every layer
en: This is the number of walls per layer.

en: Object Operations
en: Object operations

en: Object Settings to modify
en: Object Settings to Modify

en: Object can't be printed for empty layer between %1% and %2%.
en: The object has empty layers between %1% and %2% and can’t be printed.

en: Object will be raised by this number of support layers. Use this function to avoid wrapping when print ABS
en: Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS.

en: Object with multiple parts was detected
en: An object with multiple parts was detected

en: Object/Part Setting
en: Object/part setting

en: Old Value
en: Old value

en: Only one G-code file can be opened at the same time.
en: Only one G-code file can be opened at a time.

en: Only the object being edit is visible.
en: Only the object being edited is visible.

en: Only trigger retraction when the travel distance is longer than this threshold
en: Only trigger retraction when the travel distance is longer than this threshold.

en: Open Documentation in web browser.
en: Open documentation in web browser

en: Open Preferences.
en: Open Preferences

en: Open next tip.
en: Open next tip

en: Order of inner wall/outer wall/infil
en: Order of inner wall/outer wall/infill

en: Output directory for the exported files.
en: This is the output directory for exported files.

en: Output the model's information.
en: This outputs the model’s information.

en: Overwrite a system profile is not allowed
en: Overwriting a system profile is not allowed.

en: Part Settings to modify
en: Part Settings to Modify

en: Part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed limitation of part cooling fan
en: The part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan.

en: Part cooling fan speed will be max when the estimated layer time is shorter than the setting value
en: The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value.

en: Part cooling fan speed will start to run at min speed when the estimated layer time is no longer than the layer time in setting. When layer time is shorter than threshold, fan speed is interpolated between the minimum and maximum fan speed according to layer printing time
en: The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time.

en: Part cooling fan will be enabled for layers of which estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time
en: The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time.

en: Perform
en: Apply

en: Plate% d: %s is not suggested to be used to print filament %s(%s). If you still want to do this printing, please set this filament's bed temperature to non zero.
en: Plate% d: %s is not suggested for use printing filament %s(%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero.

en: Please choose the filament colour
en: Please choose the filament color

en: Please correct them in the param tabs
en: Please correct them in the Param tabs

en: Please enter the layer number
en: Please enter the layer number.

en: Please heat the nozzle to above 170 degree before loading filament.
en: Please heat the nozzle to above 170 degrees before loading filament.

en: Please note that saving action will replace this preset
en: Please note that saving will overwrite the current preset.

en: Please save project and restart the program.
en: Please save your project and restart the application.

en: Please select an AMS slot before calibration
en: Please select an AMS slot before calibration.

en: Portions copyright
en: License Info

en: Power on update
en: Update on startup

en: Preset "%1%" already exists and is incompatible with current printer.
en: Preset "%1%" already exists and is incompatible with the current printer.

en: Preview only mode:
    The loaded file contains gcode only, Can not enter the Prepare page
en: Preview only mode:
    The loaded file contains G-code only, cannot enter the Prepare page

en: Previous unsaved project detected, do you want to restore it?
en: Previously unsaved items have been detected. Do you want to restore them?

en: Prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Do you want to enable prime tower?
en: A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?

en: Prime tower is required for smooth timeplase. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?
en: A Prime tower is required for smooth timeplase mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?

en: Print By Object: 
    Suggest to use auto-arrange to avoid collisions when printing.
en: Print By Object: 
    We suggest using auto-arrange to avoid collisions when printing.

en: Print file not found, Please slice it again and send it for printing.
en: Print file not found; please slice it again and send it for printing.

en: Print file not found. please slice again.
en: Print file not found; please slice again.

en: Print sequence of inner wall, outer wall and infill.
en: This is the print sequence of inner walls, outer walls, and infill.

en: Print sequence, layer by layer or object by object
en: This determines the print sequence, allowing you to print layer-by-layer or object-by-object.

en: Print speed of ironing lines
en: This is the print speed for ironing lines.

en: Print using materials mounted on the back of the case
en: Print using filament on external spool.

en: Print with filaments in ams
en: Print with filament in AMS

en: Print with filaments in the AMS
en: Print with filament in the AMS

en: Print with filaments mounted on the back of the chassis
en: Print with filament on external spool

en: Print with the filament mounted on the back of chassis
en: Print with filament on external spool

en: Printer is busy downloading, Please wait for the downloading to finish.
en: Printer is busy downloading; please wait for the download to finish.

en: Printer local connection failed, please try again.
en: Printer local connection failed; please try again.

en: Printing List
en: Printing list

en: Printing Progress
en: Printing progress

en: Printing Silk Filament
    Did you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
en: Printing Silk Filament
    Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.

en: Processing G-Code from Previous file...
en: Processing G-Code from previous file…

en: Pull back current filament
en: Pull back the current filament

en: Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be seen outside. It will not take effect, unless the prime tower is enabled.
en: Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled.

en: Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect, unless the prime tower is enabled.
en: Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled.

en: Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls the fuzzy position
en: This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position.

en: Recent projects
en: Recent Projects

en: Recommended nozzle temperature of this filament type is [%d, %d] degree centigrade
en: The recommended nozzle temperature for this filament type is [%d, %d] degrees centigrade

en: Recommended nozzle temperature range of this filament. 0 means no set
en: Recommended nozzle temperature range of this filament. 0 means not set

en: Repaired 3mf file contains more than one object
en: The repaired 3mf file contains more than one object.

en: Repaired 3mf file contains more than one volume
en: The repaired 3mf file contains more than one volume.

en: Repaired 3mf file does not contain any object
en: The repaired 3mf file does not contain any objects.

en: Repaired 3mf file does not contain any volume
en: The repaired 3mf file does not contain any volume.

en: Reset Position
en: Reset position

en: Reset Rotation
en: Reset rotation

en: Restore to inch
en: Restore to Inch

en: Restore to meter
en: Restore to Meter

en: Retract when change layer
en: Retract on layer change

en: Retraction Speed
en: Retraction speed

en: Right button click the icon to drop the object printable property
en: Right click the icon to drop the object printable property

en: Right button click the icon to drop the object settings
en: Right click the icon to drop the object settings

en: Rotate of view
en: Rotate View

en: SD Card
en: MicroSD Card

en: SD Card Abnormal
en: MicroSD Card Abnormal

en: Same as Global Bed Type
en: Same as Global Plate Type

en: Save file as:
en: Save file as

en: Select all
en: Select All

en: Send to Printer SD card
en: Send to Printer MicroSD card

en: Sending gcode file over LAN
en: Sending G-code file over LAN

en: Sending gcode file to sdcard
en: Sending G-code file to MicroSD card

en: Set Orientation
en: Set orientation

en: Set Position
en: Set position

en: Set Scale
en: Set scale

en: Set as an individual object
en: Set as An Individual Object

en: Set as individual objects
en: Set as Individual Objects

en: Set parameters for multiple objects
    Did you know that you can set slicing parameters for all selected objects at one time?
en: Set parameters for multiple objects
    Did you know that you can set slicing parameters for all selected objects at once?

en: Show command help.
en: This shows command help.

en: Show the list of the keyboard shortcuts
en: Show the list of keyboard shortcuts

en: Shrink the initial layer on build plate to compensate for elephant foot effect
en: This shrinks the first layer on the build plate to compensate for elephant foot effect.

en: Slice all plate to obtain time and filament estimation
en: Slice all plates to obtain time and filament estimation

en: Slice ok.
en: Slice complete

en: Slicing height for each layer. Smaller layer height means more accurate and more printing time
en: This is the height for each layer. Smaller layer heights give greater accuracy but longer printing time.

en: Slow down for overhang
en: Slow down for overhangs

en: Software has New version.
en: An update is available!

en: Soluble material is commonly used to print support and support interface
en: Soluble material is commonly used to print support and support interfaces

en: Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction
en: This is the amount of filament in the extruder that is pulled back to avoid oozing during long travel distances. Set to 0 to disable retraction.

en: Spacing between support lines
en: This determines the spacing between support lines.

en: Spacing of bottom interface lines. Zero means solid interface
en: This is the spacing of bottom interface lines. 0 means solid interface.

en: Spacing of interface lines. Zero means solid interface
en: This is the spacing of interface lines. 0 means solid interface.

en: Sparse infill area which is smaller than threshold value is replaced by internal solid infill
en: Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill.

en: Speed for reloading filament into extruder. Zero means same speed with retraction
en: The speed for reloading filament into the extruder after a retraction; setting this to 0 means that it will be the same speed as the retraction.

en: Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers
en: This is the speed of auxiliary part cooling fan. The auxiliary fan will run at this speed during printing except for during the first several layers which may be set to have no part cooling.

en: Speed of bridge and completely overhang wall
en: This is the speed for bridges and 100% overhang walls.

en: Speed of gap infill. Gap usually has irregular line width and should be printed more slowly
en: This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly.

en: Speed of initial layer except the solid infill part
en: This is the speed for the first layer except for solid infill sections.

en: Speed of inner wall
en: This is the speed for inner walls.

en: Speed of internal solid infill, not the top and bottom surface
en: This is the speed for internal solid infill, not including the top or bottom surface.

en: Speed of internal sparse infill
en: This is the speed for internal sparse infill.

en: Speed of outer wall which is outermost and visible. It's used to be slower than inner wall speed to get better quality.
en: This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality.

en: Speed of retractions
en: This is the speed for retraction.

en: Speed of solid infill part of initial layer
en: This is the speed for solid infill parts of the first layer.

en: Speed of support
en: This is the speed for support.

en: Speed of support interface
en: This is the speed for support interfaces.

en: Speed of top surface infill which is solid
en: This is the speed for solid top surface infill.

en: Speed of travel which is faster and without extrusion
en: This is the speed at which traveling is done.

en: Speed up your print with Adaptive Layer Height
    Did you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
en: Speed up your print with Adaptive Layer Height
    Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!

en: Spiralize smooths out the z moves of the outer contour. And turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam
en: This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam.

en: Split to objects
en: Split to Objects

en: Split to parts
en: Split to Parts

en: Start G-code when start the printing of this filament
en: G-code added when the printer starts using this filament

en: Start G-code when start the whole printing
en: G-code added when starting a print

en: Start calibration
en: Start

en: Step 1, please confirm Bambu Studio and your printer are in the same LAN.
en: Step 1, please confirm that Bambu Studio and your printer are on the same LAN.

en: Succeed to export G-code to %1%
en: Success! G-code exported to %1%

en: Support Generated
en: Support generated

en: Support filament
en: Filament for Supports

en: Support material is commonly used to print support and support interface
en: Support material is commonly used to print support and support interfaces.

en: Support painting
en: Support Painting

en: Support will be generated for overhangs whose slope angle is below the threshold.
en: Support will be generated for overhangs whose slope angle is below this threshold.

en: Supports Painting
en: Support Painting

en: Supports silent mode
en: Silent Mode

en: Switch cloud environment, Please login again!
en: Cloud environment switched; please login again!

en: Switch to rectilinear pattern?
    Yes - switch to rectilinear pattern automaticlly
    No  - reset density to default non 100% value automaticlly
en: Switch to rectilinear pattern?
    Yes - Switch to rectilinear pattern automatically
    No  - Reset density to default non 100% value automatically

en: Switching the language requires application restart.
en: Switching languages requires the application to restart.

en: Synchronizing device information time out
en: Synchronizing device information timed out

en: Temperature of vitrificaiton
en: Temperature of vitrification

en: Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab device, please read the termsand conditions.By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use(collectively, the "Terms"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services.
en: Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the "Terms"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services.

en: The 3mf is generated by old Bambu Studio, load geometry data only.
en: The 3mf was generated by an old version of Bambu Studio, loading geometry data only.

en: The 3mf is not compatible, load geometry data only!
en: The 3mf is not compatible, loading geometry data only!

en: The 3mf is not from Bambu Lab, load geometry data only.
en: The 3mf is not from Bambu Lab, loading geometry data only.

en: The AMS will automatically read the filament information when inserting a new Bambu Lab filament. This takes about 20 seconds.
en: The AMS will automatically read the filament information when inserting a new Bambu Lab filament spool. This takes about 20 seconds.

en: The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute.The reading process will roll filament spools.
en: The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute.The reading process will rotate the filament spools.

en: The Bambu Studio needs an upgrade
en: Bambu Studio needs an update

en: The Config can not be loaded.
en: The Config cannot be loaded.

en: The SLA archive doesn't contain any presets. Please activate some SLA printer preset first before importing that SLA archive.
en: The SLA archive doesn't contain any presets. Please activate some SLA printer presets first before importing that SLA archive.

en: The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table.
en: The actual flushing volumes is equal to the flush multiplier value multiplied by the flushing volumes in the table.

en: The amount of material to extrude during ironing. Relative to flow of normal layer height. Too high value results in overextrusion on the surface
en: This is the amount of material to be extruded during ironing. It is relative to the flow of normal layer height. Too high a value will result in overextrusion on the surface.

en: The application cannot run normally because OpenGL version is lower than 2.0.
en: The application cannot run normally because your OpenGL version is lower than 2.0.

en: The average diatance between the random points introducded on each line segment
en: The average distance between the random points introduced on each line segment

en: The bed temperature exceeds filament's vitrification temperature. Please open the front door of printer before printing to avoid nozzle clog.
en: The bed temperature exceeds filament's vitrification temperature. Please open the front door of printer before printing to avoid nozzle clogs.

en: The configuration may be generated by a newer version of BambuStudio.
en: The configuration may have been generated by a newer version of Bambu Studio.

en: The configuration package is incompatible with current application.
    %s will update the configuration package, Otherwise it won't be able to start
en: The configuration package is incompatible with the current application.
    %s will update the configuration package to allow the application to start.

en: The current project has unsaved changes, save it before continue?
en: The current project has unsaved changes. Would you like to save before continuing?

en: The default acceleration of both normal printing and travel except initial layer
en: This is the default acceleration for both normal printing and travel after the first layer.

en: The distance between the lines of ironing
en: This is the distance between the lines used for ironing.

en: The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on printer or update next time starting the studio.
en: The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Bambu Studio.

en: The flow ratio set by object, the meaning is the same as flow ratio.
en: The flow ratio set by object; the meaning is the same as flow ratio.

en: The following object(s) have empty initial layer and can't be printed. Please Cut the bottom or enable supports.
en: The following object(s) have an empty initial layer and can't be printed. Please cut the bottom or enable supports.

en: The largest printable layer height for extruder. Used tp limits the maximum layer hight when enable adaptive layer height
en: The highest printable layer height for the extruder: this is used to limit the maximum layer height when adaptive layer height is enabled.

en: The length of fast retraction before wipe, relative to retraction length
en: This is the length of fast retraction before a wipe, relative to retraction length.

en: The localization tag of build plate is detected, and printing is paused if the tag is not in predefined range.
en: The localization tag of the build plate will be detected, and printing will be paused if the tag is not in predefined range.

en: The lowest printable layer height for extruder. Used tp limits the minimum layer hight when enable adaptive layer height
en: The lowest printable layer height for the extruder. This is used to limit the minimum layer height when adaptive layer height is enabled.

en: The material may have volumetric change after switching between molten state and crystalline state. This setting changes all extrusion flow of this filament in gcode proportionally. Recommended value range is between 0.95 and 1.05. Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow
en: The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.

en: The material type of filament
en: Filament material type

en: The metallic material of nozzle. This determines the abrasive resistance of nozzle, and what kind of filament can be printed
en: The metallic material of the nozzle: This determines the abrasive resistance of the nozzle and what kind of filament can be printed.

en: The minimum printing speed when slow down for cooling
en: The minimum printing speed when slowing down for cooling.

en: The name is not allowed to be empty.
en: The name field is not allowed to be empty.

en: The name is not allowed to end with space character.
en: The name is not allowed to end with a space.

en: The name is not allowed to start with space character.
en: The name is not allowed to start with a space.

en: The name may show garbage characters!
en: Because of unsupported text encoding, garbage characters may appear!

en: The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be attrited or damaged.
en: The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged.

en: The nozzle's hardness. Zero means no checking for nozzle's hardness during slicing.
en: The nozzle's hardness. Zero means no checking for nozzle hardness during slicing.

en: The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of bottom shell is absolutely determained by bottom shell layers
en: The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers.

en: The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is absolutely determained by top shell layers
en: The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers.

en: The object from file %s is too small, and maybe in meters or inches.
     Do you want to scale to millimeters?
en: The object from file %s is too small, and may be in meters or inches.
     Do you want to scale to millimeters?

en: The peroid of backup in seconds.
en: The period of backup in seconds.

en: The prime tower is not supported in "By object" print.
en: A prime tower is not supported in “By object” print.

en: The prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height.
en: A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height.

en: The prime tower requires "support gap" to be multiple of layer height
en: A prime tower requires any “support gap” to be a multiple of layer height.

en: The prime tower requires that all objects are printed over the same number of raft layers
en: A prime tower requires that all objects are printed over the same number of raft layers.

en: The prime tower requires that all objects are sliced with the same layer heights.
en: A prime tower requires that all objects are sliced with the same layer height.

en: The prime tower requires that all objects have the same layer heights
en: A prime tower requires that all objects have the same layer height.

en: The prime tower requires that support has the same layer height with object.
en: A prime tower requires that support has the same layer height as the object.

en: The printer does not support sending to printer SD card.
en: The printer does not support sending to printer MicroSD card.

en: The printer is busy on other print job
en: The printer is busy with another print job.

en: The printer is required to be in the same LAN as Bambu Studio.
en: The printer is required to be on the same LAN as Bambu Studio.

en: The printing speed in exported gcode will be slowed down, when the estimated layer time is shorter than this value, to get better cooling for these layers
en: The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers.

en: The selected file contains several disjoint areas. This is not supported.
en: The selected file contains several disjointed areas. This is not supported.

en: The spiral vase mode does not work when an object contains more than one materials.
en: Spiral (vase) mode does not work when an object contains more than one material.

en: The start and end points which is from cutter area to garbage can.
en: The start and end points which are from the cutter area to the excess chute.

en: The start position to print each part of outer wall
en: This is the starting position for each part of the outer wall.

en: The supplied file couldn't be read because it's empty
en: The supplied file couldn't be read because it's empty.

en: The target object contains only one part and can not be splited.
en: The target object contains only one part and cannot be split.

en: The type of the last solid object part is not to be changed.
en: The type of the last solid object part cannot be changed.

en: The version of Bambu studio is too low and needs to be updated to the latest version before it can be used normally
en: The version of Bambu Studio is too low and needs to be updated to the latest version before it can be used normally

en: The volume of material to prime extruder on tower.
en: This is the volume of material to prime the extruder with on the tower.

en: The width within which to jitter. It's adversed to be below outer wall line width
en: The width of jittering: it’s recommended to keep this lower than the outer wall line width.

en: The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, in order to avoid appearance defects when printing objects.
en: The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects.

en: The z gap between the top support interface and object
en: This determines the Z gap between top support interfaces and objects.

en: There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, press "Confirm" to start printing.
en: There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click "Confirm" to start printing.

en: There many parts of the software that come from community contributions, so we're unable to list them one-by-one, and instead, they'll be attributed in the corresponding code comments.
en: There are many parts of the software that come from community contributions, so we're unable to list them one-by-one, and instead, they'll be attributed in the corresponding code comments.

en: This G-code is inserted at every layer change before lifting z
en: This G-code is inserted at every layer change before lifting z.

en: This G-code will be used as a code for the pause print. User can insert pause G-code in gcode viewer
en: This G-code will be used as a code for the pause print. Users can insert pause G-code in the G-code viewer.

en: This action will break a cut correspondence.
    After that model consistency can't be guaranteed .
    
    To manipulate with solid parts or negative volumes you have to invalidate cut infornation first.
en: This action will break a cut correspondence.
    After that, model consistency can't be guaranteed .
    
    To manipulate with solid parts or negative volumes you have to invalidate cut information first.

en: This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analysed and calculated automatically.
en: This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically.

en: This file contains several objects positioned at multiple heights.
    Instead of considering them as multiple objects, should 
    the file be loaded as a single object having multiple parts?
en: This file contains several objects positioned at multiple heights.
    Instead of considering them as multiple objects, should 
    the file be loaded as a single object with multiple parts?

en: This gcode is inserted when change filament, including T command to trigger tool change
en: This G-code is inserted when filament is changed, including T commands to trigger tool change.

en: This gcode part is inserted at every layer change after lift z
en: This G-code is inserted at every layer change after the z lift.

en: This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than top shell thickness, the top shell layers will be increased
en: This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased

en: This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colours of the objects will be mixed as a result. It will not take effect, unless the prime tower is enabled.
en: This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled.

en: This option will auto detect narrow internal solid infill area. If enabled, concentric pattern will be used for the area to speed printing up. Otherwise, rectilinear pattern is used defaultly.
en: This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default.

en: This plate is locked,
    We can not do auto-arrange on this plate.
en: This plate is locked.
    We cannot auto-arrange this plate.

en: This plate is locked,
    We can not do auto-orient on this plate.
en: This plate is locked.
    We cannot auto-orient this plate.

en: This setting determines the maximum overhang angle that t he branches of tree support allowed to make.If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther.
en: This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther.

en: This setting is only used for model size tunning with small value in some cases.
    For example, when model size has small error and hard to be assembled.
    For large size tuning, please use model scale function.
    
    The value will be reset to 0.
en: This setting is only used for tuning model size by small amounts.
    For example, when the model size has small errors or when tolerances are incorrect. For large adjustments, please use the model scale function.
    
    The value will be reset to 0.

en: This setting specify the count of walls around tree support
en: This setting specifies the wall count around tree support.

en: This setting stands for how much volume of filament can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. Can't be zero
en: This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero.

en: Time to load new filament when switch filament. For statistics only
en: Time to load new filament when switching filament, for statistical purposes only.

en: Time to unload old filament when switch filament. For statistics only
en: Time to unload old filament when switching filament, for statistical purposes only.

en: To objects
en: To Objects

en: To parts
en: To Parts

en: Too large elefant foot compensation is unreasonable.
    If really have serious elephant foot effect, please check other settings.
    For example, whether bed temperature is too high.
    
    The value will be reset to 0.
en: The elephant foot compensation value is too large.
    If there are significant elephant foot issues, please check other settings.
    The bed temperature may be too high, for example.
    
    The value will be reset to 0.

en: Too large layer height.
    Reset to 0.2
en: Layer height too large
    It has been reset to 0.2

en: Too large line width
en: Line width too large

en: Too small ironing spacing.
    Reset to 0.1
en: Ironing spacing too small
    It has been reset to 0.1

en: Too small layer height.
    Reset to 0.2
en: Layer height too small
    It has been reset to 0.2

en: Too small line width
en: Line width too small

en: Too small max volumetric speed.
    Reset to 0.5
en: Too small max volumetric speed.
    Value was reset to 0.5

en: Tool Move
en: Tool move

en: Top surfaces
en: All top surfaces

en: Topmost surface
en: Topmost surface only

en: Total Estimation
en: Total estimation

en: Undef
en: Undefined

en: Undefine
en: Undefined

en: Unknown error when export G-code.
en: Unknown error with G-code export

en: Unknown file format. Input file must have .3mf or .zip.amf extension.
en: Unknown file format: input file must have .3mf or .zip.amf extension.

en: Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension.
en: Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension.

en: Unkown Error.
en: Unknown Error.

en: Unload Filament
en: Unload

en: Unsaved Changes
en: unsaved changes

en: Update built-in Presets automatically.
en: Update built-in presets automatically.

en: Updating successful
en: Update successful

en: Use only one wall on flat top surface, to give more space to the top infill pattern
en: Use only one wall on flat top surfaces, to give more space to the top infill pattern

en: Use only one wall on the first layer of model
en: Use only one wall on the first layer of models

en: User can self-define the project file name when export
en: Users can decide project file names when exporting.

en: Volume Operations
en: Volume operations

en: Volume of nozzle between the cutter and the end of nozzle
en: Volume of nozzle between the filament cutter and the end of the nozzle

en: What kind of gcode the printer is compatible with
en: What kind of G-code the printer is compatible with.

en: When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter
en: When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter.

en: When using support material for the support interface, We recommend the following settings:
    0 top z distance, 0 interface spacing, concentric pattern and disable independent support layer height
en: When using support material for the support interface, we recommend the following settings:
    0 top z distance, 0 interface spacing, concentric pattern and disable independent support layer height

en: Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. It prevents nozzle from hitting the print when travel move. Using spiral line to lift z can prevent stringing
en: Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift z can prevent stringing.

en: Whether the machine supports silent mode in which machine use lower acceleration to print
en: Whether the machine supports silent mode in which machine uses lower acceleration to print more quietly

en: While printing by Object, the extruder may collide skirt.
    Thus, reset the skirt layer to 1 to avoid that.
en: While printing by object, the extruder may collide with a skirt.
    Thus, reset the skirt layer to 1 to avoid collisions.

en: Width of prime tower
en: This is the width of prime towers.

en: Wipe Distance
en: Wipe distance

en: Would you like to log in this printer with current account?
en: Would you like to log in this printer with the current account?

en: XY separation between an object and its support
en: This controls the XY separation between an object and its support.

en: You can find it in "Settings > Network > Connection code"
    on the printer, as shown in the figure:
en: You can find it in "Settings > Network > Access code"
    on the printer, as shown in the figure:

en: You can keep the modified presets to the new project or discard them
en: You can keep the modified presets for the new project or discard them

en: You can keep the modifield presets to the new project, discard or save changes as new presets.
en: You can keep the modified presets for the new project, discard, or save changes as new presets.

en: You cannot load SLA project with a multi-part object on the bed
en: You cannot load an SLA project with a multi-part object on the bed

en: You have changed some preset settings. 
    Would you like to keep these changed settings (new value) after switching preset?
en: You have changed some preset settings. 
    Would you like to keep these changed settings (new value) after switching presets?

en: You have changed some settings of preset "%1%". 
    Would you like to keep these changed settings (new value) after switching preset?
en: You have changed some settings of preset "%1%". 
    Would you like to keep these changed settings (new value) after switching presets?

en: You try to delete an object which is a part of a cut object.
    This action will break a cut correspondence.
    After that model consistency can't be guaranteed.
en: You are trying to delete an object which is a part of a cut object.
    This action will break a cut correspondence.
    After that, model consistency can't be guaranteed.

en: You'd better upgrade your software.
en: You should update your software.

en: Your model needs support ! Please make support material enable.
en: Your model needs support! Please enable support material.

en: Your object appears to be too large, Do you want to scale it down to fit the heat bed automatically?
en: Your object appears to be too large, Do you want to scale it down to fit the print bed automatically?

en: Z gap between object and raft. Ignored for soluble interface
en: This is the Z gap between an object and a raft. It is ignored for soluble interfaces.

en: Z hop when retract
en: Z hop when retracting

en: Zero initial layer height is invalid.
    
    The first layer height will be reset to 0.2.
en: Zero first layer height is invalid.
    
    The first layer height will be reset to 0.2.

en: Zoom of view
en: Zoom View

en: archive too large
en: Archive too large

en: arrange current plate
en: Arrange current plate

en: auto rotate current plate
en: Auto rotate current plate

en: buffer too small
en: Buffer too small

en: connectors is out of object
en: Connectors must be on object surface.

en: debug save button
en: Debug save button

en: delete all objects on current plate
en: Delete all objects on the current plate

en: does not contain valid gcode.
en: Does not contain valid G-code.

en: file too large
en: File too large

en: illegal characters:
en: Illegal characters:

en: illegal suffix:
en: Illegal suffix:

en: keyboard 1-9: set filament for object/part
en: Keyboard 1-9: set filament for object/part

en: max slicing time per plate in seconds.
en: max slicing time per plate in seconds

en: max triangle count per plate for slicing.
en: max triangle count per plate for slicing

en: multiple cells copy is not supported
en: Copying multiple cells is not supported.

en: normal(auto) and tree(auto) is used to generate support automatically. If normal(manual) or tree(manual) is selected, only support enforcers are generated
en: normal(auto) and tree(auto) are used to generate support automatically. If normal(manual) or tree(manual) is selected, only support enforcers are generated

en: one cell can only be copied to one or multiple cells in the same column
en: One cell can only be copied to one or more cells in the same column.

en: prepare 3mf file...
en: preparing 3mf file...

en: select all objects on current plate
en: Select all objects on the current plate

en: send completed
en: Send complete

en: the Configuration package is incompatible with current APP.
en: The configuration package is incompatible with the current version of Bambu Studio.

en: the configuration package is incompatible with current application.
en: the configuration package is incompatible with the current application.

en: travel
en: Travel

en: uniform scale
en: Uniform scale

en: unsupported multidisk
en: Saving to RAID is not supported.

en: version %s update information :
en: version %s update information:
