# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-02-12 14:01+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:129
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:199
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:64
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:258
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:259
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:260
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:261
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AppConfig.cpp:118
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:118
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:120
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:470
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:122
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:126
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:176
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:214
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:472
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:497
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2033
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:73
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:77
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:162
#: src/slic3r/GUI/Tab.cpp:2320
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:78
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:84
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:85
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:89
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:92 src/slic3r/GUI/ConfigWizard.cpp:218
#: src/slic3r/GUI/ConfigWizard.cpp:971 src/slic3r/GUI/ConfigWizard.cpp:985
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:135
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333
#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91
#: src/libslic3r/PrintConfig.cpp:178 src/libslic3r/PrintConfig.cpp:236
#: src/libslic3r/PrintConfig.cpp:311 src/libslic3r/PrintConfig.cpp:319
#: src/libslic3r/PrintConfig.cpp:369 src/libslic3r/PrintConfig.cpp:379
#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516
#: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:712
#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1292
#: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:1328
#: src/libslic3r/PrintConfig.cpp:1384 src/libslic3r/PrintConfig.cpp:1394
#: src/libslic3r/PrintConfig.cpp:1516 src/libslic3r/PrintConfig.cpp:1524
#: src/libslic3r/PrintConfig.cpp:1565 src/libslic3r/PrintConfig.cpp:1573
#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591
#: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1682
#: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1985
#: src/libslic3r/PrintConfig.cpp:2019 src/libslic3r/PrintConfig.cpp:2147
#: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2233
#: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2270
#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290
#: src/libslic3r/PrintConfig.cpp:2475 src/libslic3r/PrintConfig.cpp:2614
#: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2632
#: src/libslic3r/PrintConfig.cpp:2642 src/libslic3r/PrintConfig.cpp:2686
#: src/libslic3r/PrintConfig.cpp:2696 src/libslic3r/PrintConfig.cpp:2708
#: src/libslic3r/PrintConfig.cpp:2728 src/libslic3r/PrintConfig.cpp:2738
#: src/libslic3r/PrintConfig.cpp:2748 src/libslic3r/PrintConfig.cpp:2766
#: src/libslic3r/PrintConfig.cpp:2781 src/libslic3r/PrintConfig.cpp:2795
#: src/libslic3r/PrintConfig.cpp:2806 src/libslic3r/PrintConfig.cpp:2819
#: src/libslic3r/PrintConfig.cpp:2864 src/libslic3r/PrintConfig.cpp:2874
#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2893
#: src/libslic3r/PrintConfig.cpp:2909
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/libslic3r/PrintConfig.cpp:709
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:98 src/slic3r/GUI/GUI_Preview.cpp:251
#: src/libslic3r/ExtrusionEntity.cpp:322
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:102
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:155
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:172
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:182 src/slic3r/GUI/BedShapeDialog.cpp:261
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:190 src/slic3r/GUI/BedShapeDialog.cpp:269
#: src/slic3r/GUI/Tab.cpp:3108
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:223 src/slic3r/GUI/BedShapeDialog.cpp:302
msgid "Not found: "
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:251
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:487
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:494 src/slic3r/GUI/BedShapeDialog.cpp:543
#: src/slic3r/GUI/BedShapeDialog.cpp:566
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:505
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:513
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:517
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:532
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:555
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:930
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:48
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1051
#: src/libslic3r/PrintConfig.cpp:71
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:60
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:889
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:81
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:115
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:119
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:120
#: src/slic3r/GUI/ConfigManipulation.cpp:140
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:136
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:139
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:159
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:162
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:163
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:208
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:210
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:211
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:94
#: src/slic3r/GUI/GUI_ObjectList.cpp:612 src/slic3r/GUI/Plater.cpp:524
#: src/slic3r/GUI/Tab.cpp:1093 src/slic3r/GUI/Tab.cpp:1094
#: src/libslic3r/PrintConfig.cpp:193 src/libslic3r/PrintConfig.cpp:416
#: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:776
#: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:827
#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:991
#: src/libslic3r/PrintConfig.cpp:1009 src/libslic3r/PrintConfig.cpp:1028
#: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1728
#: src/libslic3r/PrintConfig.cpp:1745
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:317
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:319
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:330
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:332
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1471
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1475
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:973
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:218
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:222
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:290 src/slic3r/GUI/ConfigWizard.cpp:573
#: src/slic3r/GUI/Tab.cpp:3158
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:291 src/slic3r/GUI/ConfigWizard.cpp:574
#: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Plater.cpp:636
#: src/libslic3r/ExtrusionEntity.cpp:309
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:427
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:429
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:431
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:433
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:438
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:481
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:565
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:566
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:603 src/slic3r/GUI/ConfigWizard.cpp:631
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:734
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:736
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:760
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:760
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:768 src/slic3r/GUI/Preferences.cpp:64
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:772
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:778 src/slic3r/GUI/Preferences.cpp:82
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:782
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:785
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:790
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:798 src/slic3r/GUI/GUI_ObjectList.cpp:1654
#: src/slic3r/GUI/GUI_ObjectList.cpp:3930 src/slic3r/GUI/Plater.cpp:3209
#: src/slic3r/GUI/Plater.cpp:3943 src/slic3r/GUI/Plater.cpp:3972
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:801
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:805
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:814
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:816
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:821
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:822
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:823
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:857
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:861
#, possible-c-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:892
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:892 src/slic3r/GUI/Tab.cpp:1945
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:896
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:930
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:933
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:953
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:953
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:967
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:970
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:980
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:981
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:984
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1018
msgid "Extruder and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1018
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1034
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1035
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1038
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1039 src/slic3r/GUI/ConfigWizard.cpp:1053
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1048
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1049
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1052
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1474 src/slic3r/GUI/ConfigWizard.cpp:2014
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1474 src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1528
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1533
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1751 src/slic3r/GUI/DoubleSlider.cpp:1878
#: src/slic3r/GUI/DoubleSlider.cpp:1899 src/slic3r/GUI/GUI.cpp:240
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1760
msgid "You have to select at least one filament for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1761
msgid "Do you want to automatic select default filaments?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1771
msgid "You have to select at least one material for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1772
msgid "Do you want to automatic select default materials?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1979
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1982
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1983
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1984
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1985 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1998
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2001
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2014
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2014 src/slic3r/GUI/GUI_ObjectList.cpp:3527
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "Layer height:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2112
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2113
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2115
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2116
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:79
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:923
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:925
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:928
#, possible-c-format
msgid "Jump to height %s or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:930 src/slic3r/GUI/DoubleSlider.cpp:1501
#: src/slic3r/GUI/DoubleSlider.cpp:1623
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:933
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:941
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:955
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:957
msgid ""
"Add color change - Left click for predefined color orShift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:959
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:960
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:962
msgid "To add another code use Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:963
msgid "To add another code use Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:972
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:973
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:976
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:978
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:979
msgid "\"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:985
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:987
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:990
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:993
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:996
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1001
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1003
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1004
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1102 src/slic3r/GUI/DoubleSlider.cpp:1138
#: src/slic3r/GUI/GLCanvas3D.cpp:982 src/slic3r/GUI/Tab.cpp:2316
#: src/libslic3r/GCode/PreviewData.cpp:445
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1103
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1112
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1112 src/slic3r/GUI/GUI_ObjectList.cpp:1661
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1113
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1115
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1139
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1147
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1148
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1449
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1459
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1462
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1480
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1482
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1488
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1489
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1490
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1491
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1504
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1590
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1591
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1606
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1607
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1622
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1872
msgid ""
"The last color change data was saved for a single extruder printer profile."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1873
msgid ""
"The last color change data was saved for a multiple extruder printer profile."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1875
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1876 src/slic3r/GUI/DoubleSlider.cpp:1897
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1889
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1890
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"\tNO if you want all tool changes switch to color changes, \n"
"\tor CANCEL to leave it unchanged"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1893
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1895
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1896
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
#: src/libslic3r/PrintConfig.cpp:352 src/libslic3r/PrintConfig.cpp:994
#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1690
#: src/libslic3r/PrintConfig.cpp:1750 src/libslic3r/PrintConfig.cpp:1930
#: src/libslic3r/PrintConfig.cpp:1976
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:131
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:134
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:145 src/slic3r/GUI/OptionsGroup.cpp:574
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:170
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190 src/slic3r/GUI/Field.cpp:221
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:376
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:199
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:235
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:238
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1660
#: src/slic3r/GUI/Tab.cpp:1719
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/Mouse3DController.cpp:387
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:239 src/slic3r/GUI/GLCanvas3D.cpp:4622
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:242
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:245
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:251
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:254
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:257
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:260
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:263
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:266
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:269
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:272
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:278
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:282
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:293
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:299 src/libslic3r/PrintConfig.cpp:511
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:309
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:318
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:604
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:690
msgid "An object outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:691
msgid "A toolpath outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:692
msgid "SLA supports outside the print area were detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:693
msgid "Some objects are not visible"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:695
msgid ""
"An object outside the print area was detected\n"
"Resolve the current problem to continue slicing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:909 src/slic3r/GUI/GLCanvas3D.cpp:938
msgid "Default print color"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:939 src/slic3r/GUI/GLCanvas3D.cpp:948
#: src/slic3r/GUI/GLCanvas3D.cpp:987
msgid "Pause print or custom G-code"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:960
#, possible-c-format
msgid "up to %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:964
#, possible-c-format
msgid "above %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:968
#, possible-c-format
msgid "%.2f - %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:995
#, possible-c-format
msgid "Color change for Extruder %d at %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1306
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1705
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1713
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1721
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2075
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2945
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:573
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3025
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:575
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3538
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4085
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4085
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4103
#, possible-c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4103
#, possible-c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4516
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4524 src/slic3r/GUI/GUI_ObjectList.cpp:1692
#: src/slic3r/GUI/Plater.cpp:3940 src/slic3r/GUI/Plater.cpp:3962
#: src/slic3r/GUI/Tab.cpp:3108
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4533 src/slic3r/GUI/Plater.cpp:4684
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4542 src/slic3r/GUI/KBShortcutsDialog.cpp:137
#: src/slic3r/GUI/Plater.cpp:2738
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4542 src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4554
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4563
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4575 src/slic3r/GUI/Plater.cpp:3797
#: src/slic3r/GUI/Plater.cpp:3809 src/slic3r/GUI/Plater.cpp:3949
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4586 src/slic3r/GUI/Plater.cpp:3951
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4599
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4609 src/slic3r/GUI/GUI_ObjectList.cpp:1485
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4673 src/slic3r/GUI/MainFrame.cpp:581
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4673 src/slic3r/GUI/GLCanvas3D.cpp:4706
msgid "Click right mouse button to open History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4690
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4706 src/slic3r/GUI/MainFrame.cpp:584
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4722
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6659
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6678
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:284
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:287
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:290
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:292
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:144 src/libslic3r/PrintConfig.cpp:3387
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:168
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:175
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:59
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:52
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:413
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:530
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:791
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:863
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:953
msgid "Hollowing and drilling"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:1033
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/libslic3r/PrintConfig.cpp:3436
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518
#: src/libslic3r/PrintConfig.cpp:3451
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1350
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1353
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1354
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/libslic3r/PrintConfig.cpp:2755
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1356
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:479
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:615
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:804
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:872
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:978
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:999
msgid "SLA gizmo turned on"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1037
msgid "SLA gizmo turned off"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1076
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1175
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1247
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1248
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1249 src/slic3r/GUI/GUI.cpp:246
#: src/slic3r/GUI/Tab.cpp:3068 src/slic3r/GUI/WipeTowerDialog.cpp:45
#: src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1252
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1313
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1324
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1349
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1352
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1355
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:500
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:574
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:138
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:141
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:442
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:450 src/slic3r/GUI/GUI_App.cpp:459
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:466
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:474
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:555
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:567
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:797
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:804
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:810
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:813 src/slic3r/GUI/wxExtensions.cpp:753
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:813
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:814 src/slic3r/GUI/GUI_ObjectList.cpp:102
#: src/slic3r/GUI/GUI_ObjectList.cpp:620 src/slic3r/GUI/Tab.cpp:1089
#: src/slic3r/GUI/Tab.cpp:1104 src/slic3r/GUI/Tab.cpp:1203
#: src/slic3r/GUI/Tab.cpp:1206 src/slic3r/GUI/Tab.cpp:1472
#: src/slic3r/GUI/Tab.cpp:1965 src/slic3r/GUI/Tab.cpp:3646
#: src/slic3r/GUI/wxExtensions.cpp:754 src/libslic3r/PrintConfig.cpp:88
#: src/libslic3r/PrintConfig.cpp:213 src/libslic3r/PrintConfig.cpp:376
#: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2276
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:814
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:815 src/slic3r/GUI/wxExtensions.cpp:755
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:815
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:820
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:820
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:822
msgid "Change Application &Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:882
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:884
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:885
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:908
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932
msgid "The presets on the following tabs were modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932 src/slic3r/GUI/Tab.cpp:2930
msgid "Discard changes and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:935
msgid "Unsaved Presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1084 src/slic3r/GUI/Tab.cpp:2942
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1085
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1086 src/slic3r/GUI/Plater.cpp:2297
#: src/slic3r/GUI/Tab.cpp:2944
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1103
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:153
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:162
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:93
#: src/slic3r/GUI/GUI_ObjectList.cpp:611 src/libslic3r/PrintConfig.cpp:72
#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:174
#: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470
#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:890
#: src/libslic3r/PrintConfig.cpp:1075 src/libslic3r/PrintConfig.cpp:1374
#: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1622
#: src/libslic3r/PrintConfig.cpp:2074 src/libslic3r/PrintConfig.cpp:2133
#: src/libslic3r/PrintConfig.cpp:2142
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
#: src/slic3r/GUI/GUI_ObjectList.cpp:613 src/slic3r/GUI/GUI_Preview.cpp:248
#: src/slic3r/GUI/Tab.cpp:1122 src/slic3r/GUI/Tab.cpp:1123
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:360
#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1866
#: src/libslic3r/PrintConfig.cpp:1872 src/libslic3r/PrintConfig.cpp:1880
#: src/libslic3r/PrintConfig.cpp:1892 src/libslic3r/PrintConfig.cpp:1902
#: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:1925
#: src/libslic3r/PrintConfig.cpp:1946 src/libslic3r/PrintConfig.cpp:1958
#: src/libslic3r/PrintConfig.cpp:1974 src/libslic3r/PrintConfig.cpp:1983
#: src/libslic3r/PrintConfig.cpp:1992 src/libslic3r/PrintConfig.cpp:2003
#: src/libslic3r/PrintConfig.cpp:2017 src/libslic3r/PrintConfig.cpp:2025
#: src/libslic3r/PrintConfig.cpp:2026 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2043 src/libslic3r/PrintConfig.cpp:2057
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
#: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:2252
#: src/libslic3r/PrintConfig.cpp:2260
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:614
#: src/slic3r/GUI/GUI_Preview.cpp:226 src/slic3r/GUI/Tab.cpp:1147
#: src/libslic3r/PrintConfig.cpp:225 src/libslic3r/PrintConfig.cpp:458
#: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1048
#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1668
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1768
#: src/libslic3r/PrintConfig.cpp:2118
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:615
#: src/slic3r/GUI/Tab.cpp:1182 src/slic3r/GUI/Tab.cpp:1836
#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1002
#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1737
#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1965
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:616
#: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:1010
#: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1757
#: src/libslic3r/PrintConfig.cpp:1947 src/libslic3r/PrintConfig.cpp:2106
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:622
#: src/slic3r/GUI/Plater.cpp:492 src/slic3r/GUI/Tab.cpp:3589
#: src/slic3r/GUI/Tab.cpp:3590 src/libslic3r/PrintConfig.cpp:2605
#: src/libslic3r/PrintConfig.cpp:2612 src/libslic3r/PrintConfig.cpp:2621
#: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2640
#: src/libslic3r/PrintConfig.cpp:2666 src/libslic3r/PrintConfig.cpp:2673
#: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2694
#: src/libslic3r/PrintConfig.cpp:2703 src/libslic3r/PrintConfig.cpp:2716
#: src/libslic3r/PrintConfig.cpp:2726 src/libslic3r/PrintConfig.cpp:2735
#: src/libslic3r/PrintConfig.cpp:2745 src/libslic3r/PrintConfig.cpp:2756
#: src/libslic3r/PrintConfig.cpp:2764
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:623
#: src/slic3r/GUI/Plater.cpp:632 src/slic3r/GUI/Tab.cpp:3621
#: src/slic3r/GUI/Tab.cpp:3622 src/libslic3r/PrintConfig.cpp:2772
#: src/libslic3r/PrintConfig.cpp:2779 src/libslic3r/PrintConfig.cpp:2793
#: src/libslic3r/PrintConfig.cpp:2804 src/libslic3r/PrintConfig.cpp:2814
#: src/libslic3r/PrintConfig.cpp:2836 src/libslic3r/PrintConfig.cpp:2847
#: src/libslic3r/PrintConfig.cpp:2854 src/libslic3r/PrintConfig.cpp:2861
#: src/libslic3r/PrintConfig.cpp:2872 src/libslic3r/PrintConfig.cpp:2881
#: src/libslic3r/PrintConfig.cpp:2890
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:3639
#: src/slic3r/GUI/Tab.cpp:3640 src/libslic3r/SLA/Hollowing.cpp:46
#: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67
#: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2900
#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2917
#: src/libslic3r/PrintConfig.cpp:2926
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:268
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:276 src/slic3r/GUI/Tab.cpp:1436
#: src/slic3r/GUI/wxExtensions.cpp:598 src/libslic3r/PrintConfig.cpp:487
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:280 src/slic3r/GUI/GUI_ObjectList.cpp:392
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:337
#, possible-c-format
msgid "Auto-repaired (%d errors):"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:344
msgid "degenerate facets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:345
msgid "edges fixed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:346
msgid "facets removed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:347
msgid "facets added"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:348
msgid "facets reversed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:349
msgid "backwards edges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:357
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:394
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:396
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:400
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:402
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:455 src/slic3r/GUI/GUI_ObjectList.cpp:467
#: src/slic3r/GUI/GUI_ObjectList.cpp:915 src/slic3r/GUI/GUI_ObjectList.cpp:3941
#: src/slic3r/GUI/GUI_ObjectList.cpp:3951
#: src/slic3r/GUI/GUI_ObjectList.cpp:3986
#: src/slic3r/GUI/ObjectDataViewModel.cpp:200
#: src/slic3r/GUI/ObjectDataViewModel.cpp:257
#: src/slic3r/GUI/ObjectDataViewModel.cpp:282
#: src/slic3r/GUI/ObjectDataViewModel.cpp:490
#: src/slic3r/GUI/ObjectDataViewModel.cpp:1725
msgid "default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:534
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1089
#: src/slic3r/GUI/GUI_ObjectList.cpp:3755
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
#: src/slic3r/GUI/GUI_ObjectList.cpp:1528
#: src/slic3r/GUI/GUI_ObjectList.cpp:1534
#: src/slic3r/GUI/GUI_ObjectList.cpp:1823
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1312
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1314
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1384
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1385
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1386
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1425
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
#: src/slic3r/GUI/GUI_ObjectList.cpp:1462
#: src/slic3r/GUI/GUI_ObjectList.cpp:1466
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1498
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1507
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1582
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1589
#: src/slic3r/GUI/GUI_ObjectList.cpp:1601
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1601
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1611
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1626
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1637
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1647 src/slic3r/GUI/Plater.cpp:3975
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1654
#: src/slic3r/GUI/GUI_ObjectList.cpp:3930 src/slic3r/GUI/Plater.cpp:3943
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1680 src/libslic3r/PrintConfig.cpp:325
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1686
msgid "Select new extruder for the object/part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1698
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1698
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1767
#: src/slic3r/GUI/GUI_ObjectList.cpp:2025
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1853
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1892
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1967
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1996
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2114
#: src/slic3r/GUI/GUI_ObjectList.cpp:2216
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2126
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2150
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2166
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2197
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2201
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2220
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2244 src/slic3r/GUI/Plater.cpp:2962
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2248
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2304
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2430
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2442
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2455
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2459
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2464
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2470
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2476
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2483
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2483
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2669
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2806
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2872
#: src/slic3r/GUI/GUI_ObjectList.cpp:2901
#: src/slic3r/GUI/GUI_ObjectList.cpp:2919
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2979
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3265
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3273
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3391
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3392
#: src/slic3r/GUI/GUI_ObjectList.cpp:3525
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3392
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3394
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3395
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3396
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3399
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3404
#: src/slic3r/GUI/GUI_ObjectList.cpp:3479 src/slic3r/GUI/Plater.cpp:143
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3520
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3525
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3525
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3525
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3527
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3532
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3777
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3777
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3793
#: src/slic3r/GUI/GUI_ObjectList.cpp:3900 src/slic3r/GUI/Tab.cpp:3440
#: src/slic3r/GUI/Tab.cpp:3444
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3794
#: src/slic3r/GUI/GUI_ObjectList.cpp:3901 src/slic3r/GUI/Tab.cpp:3441
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3926
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3927
msgid "Select extruder number for selected objects and/or parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3945
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3946
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3971
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4068 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4068 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458
#: src/slic3r/GUI/Mouse3DController.cpp:321
#: src/slic3r/GUI/Mouse3DController.cpp:344
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:220
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:223 src/slic3r/GUI/GUI_Preview.cpp:577
#: src/libslic3r/GCode/PreviewData.cpp:345
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224 src/libslic3r/PrintConfig.cpp:500
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:225 src/libslic3r/PrintConfig.cpp:2238
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/Tab.cpp:1459
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:228
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:229 src/slic3r/GUI/GUI_Preview.cpp:337
#: src/slic3r/GUI/GUI_Preview.cpp:521 src/slic3r/GUI/GUI_Preview.cpp:576
#: src/slic3r/GUI/GUI_Preview.cpp:831 src/libslic3r/GCode/PreviewData.cpp:357
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:230 src/slic3r/GUI/GUI_Preview.cpp:574
#: src/libslic3r/GCode/PreviewData.cpp:359
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:233
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:237
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:310
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:311
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:312
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:313
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1767
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/PrintConfig.cpp:2105 src/libslic3r/PrintConfig.cpp:2117
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/ExtrusionEntity.cpp:316
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/PrintConfig.cpp:918
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/slic3r/GUI/Tab.cpp:1113
#: src/libslic3r/ExtrusionEntity.cpp:318
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:249 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/PrintConfig.cpp:1991
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/Tab.cpp:1193
#: src/libslic3r/ExtrusionEntity.cpp:321
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:255 src/libslic3r/PrintConfig.cpp:2152
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:256
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:257
msgid "Unretractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:258
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:259
msgid "Legend"
msgstr ""

#: src/slic3r/GUI/Job.hpp:123
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:14 src/slic3r/GUI/MainFrame.cpp:710
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:888
#: src/slic3r/GUI/Plater.cpp:5555 src/libslic3r/PrintConfig.cpp:3338
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Save project (3MF)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
#: src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Press to select multiple object or move multiple object with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Main Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Select All objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Delete All"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#, no-c-format
msgid ""
"Press to activate selection rectangle\n"
"or to snap by 5% in Gizmo scale\n"
"or to snap by 1mm in Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid ""
"Press to scale selection to fit print volume\n"
"in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid ""
"Press to activate deselection rectangle\n"
"or to scale or rotate selected objects\n"
"around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Press to activate one direction scaling in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Zoom to all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Zoom to selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Unselect gizmo / Clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Plater Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Show/Hide (L)egend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Preview Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Layers Slider Shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:66
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:174
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:204
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:413
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:422
msgid "The selected project is no more available"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:422 src/slic3r/GUI/MainFrame.cpp:787
#: src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:474
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:477 src/slic3r/GUI/MainFrame.cpp:751
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:477
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481 src/slic3r/GUI/MainFrame.cpp:752
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:506
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:540
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:540
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:565
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:566
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:568
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:569
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:572
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:573
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:575
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:576
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:580
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:583
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:588
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:589
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:591
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:592
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:596
msgid "Re&load from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:597
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:617 src/slic3r/GUI/MainFrame.cpp:754
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:617
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:662 src/libslic3r/PrintConfig.cpp:2132
#: src/libslic3r/PrintConfig.cpp:2141
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:662
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:665 src/libslic3r/PrintConfig.cpp:164
#: src/libslic3r/PrintConfig.cpp:173
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:665
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:669 src/libslic3r/PrintConfig.cpp:1632
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:669
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show &labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:694
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:695
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:705
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:705
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:707
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:707
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:710
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:723
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:724
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:725
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:726
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:729
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:751
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:752
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:754
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:775
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:786
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:792
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:792
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:793
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:840
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:849 src/slic3r/GUI/Plater.cpp:3105
#: src/slic3r/GUI/Plater.cpp:5137 src/slic3r/GUI/Tab.cpp:1223
#: src/slic3r/GUI/Tab.cpp:3647
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:851
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:874
msgid " was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:876
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:891
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:901
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:913
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:913 src/libslic3r/PrintConfig.cpp:3432
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:927
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:946 src/slic3r/GUI/MainFrame.cpp:1008
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:982
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1029
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:291
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:306
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:313
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:317
#: src/slic3r/GUI/Mouse3DController.cpp:337
#: src/slic3r/GUI/Mouse3DController.cpp:339
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:326
#: src/slic3r/GUI/Mouse3DController.cpp:337
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:332
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:73
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:74
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:56
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:60
#: src/slic3r/GUI/ObjectDataViewModel.cpp:216
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67 src/slic3r/GUI/Tab.cpp:3496
#: src/slic3r/GUI/Tab.cpp:3585
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:253
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:253
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:163
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:164
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:165
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:168
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:218
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1226
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:238
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:239
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:240
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:241
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1213
#: src/slic3r/GUI/Plater.cpp:1255
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:243
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:340
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:495
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:497 src/libslic3r/PrintConfig.cpp:1901
#: src/libslic3r/PrintConfig.cpp:2665
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:498 src/slic3r/GUI/Plater.cpp:621
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:499
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:531 src/slic3r/GUI/Tab.cpp:1119
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:533
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:541
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:635
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:637
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:638
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:812
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:813 src/slic3r/GUI/Tab.cpp:1427
#: src/slic3r/GUI/Tab.cpp:1428
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:814
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:815 src/slic3r/GUI/Preset.cpp:1474
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:816
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:875 src/slic3r/GUI/Plater.cpp:5556
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:876
msgid "Remove device"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:877
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:889 src/slic3r/GUI/Plater.cpp:3105
#: src/slic3r/GUI/Plater.cpp:5140
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1039
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1149
#, possible-c-format
msgid "%d (%d shells)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1154
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1157
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1167
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1188
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1191
msgid "object(s)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1191
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1228 src/slic3r/GUI/Plater.cpp:1243
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1228 src/slic3r/GUI/Plater.cpp:1243
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1241 src/libslic3r/PrintConfig.cpp:760
#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2502
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1258
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1262 src/slic3r/GUI/Plater.cpp:1271
#: src/libslic3r/PrintConfig.cpp:582
msgid "Color"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1267
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1375
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1379
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2135
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2257
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2267
#, possible-c-format
msgid "Processing input file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2295
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2296 src/slic3r/GUI/Tab.cpp:2943
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2341
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2344 src/slic3r/GUI/Plater.cpp:2397
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2351
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2352
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2374
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2394
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2410
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2512
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2513
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2575
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2582
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2588
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2594
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2696
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2707
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2744
msgid "Hollow"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2751
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2797
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2819
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2825
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2826
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2842
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2875
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2876
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2906
msgid "Indexing hollowed object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2910
msgid "Hollowing cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2911
msgid "Hollowing done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2913
msgid "Hollowing failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2954
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2965
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3090
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3099
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3137 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3154
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3272
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3307
msgid "It is not allowed to change the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3307
msgid "Do you want to retry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3328
msgid "Reload from: "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3436
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3441
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3461
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3482
msgid "Fix Throught NetFabb"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3673
msgid "Export failed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3678 src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3940 src/slic3r/GUI/Plater.cpp:3962
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3949
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3951
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3953
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3953
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3972
msgid "Reload the selected object from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3975
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4004
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4004
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4006
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4006
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4008
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4008
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4011
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4011
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4023
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4023 src/slic3r/GUI/Plater.cpp:4043
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4025
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4025 src/slic3r/GUI/Plater.cpp:4057
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4028 src/slic3r/GUI/Plater.cpp:4043
#: src/slic3r/GUI/Plater.cpp:4057 src/libslic3r/PrintConfig.cpp:3456
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4028
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4049
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4049
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4108
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4116 src/slic3r/GUI/Tab.cpp:2386
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4413
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4588
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4616
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4620
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4684
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4692
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4700
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4735
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4771
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4801
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4854
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4854
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5001
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5022
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5025
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5068
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5073
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5555
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5556
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5640
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1794
#: src/slic3r/GUI/Tab.cpp:2038
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:39
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:41
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:47
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:49
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:55
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:57
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:66
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:73
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:75
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:84
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:89
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:91
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:97
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:99
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:106
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:108
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:115
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:121
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:123
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:129
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:131
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:137
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:147
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:149
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:176
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:226
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:241
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preset.cpp:247
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1059 src/slic3r/GUI/Preset.cpp:1114
#: src/slic3r/GUI/Preset.cpp:1192 src/slic3r/GUI/Preset.cpp:1234
#: src/slic3r/GUI/PresetBundle.cpp:1576 src/slic3r/GUI/PresetBundle.cpp:1665
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1118 src/slic3r/GUI/Preset.cpp:1238
#: src/slic3r/GUI/PresetBundle.cpp:1670
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1151
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1153
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1472
msgid "filament"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1473
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/PresetBundle.cpp:1697
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:29
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:40
msgid "During the other layers, fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:42
msgid "Fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:48
msgid "will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:51
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:53
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
msgid "will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:156
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:165
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:184
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:203
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:213
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:220
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:225
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:229
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:263
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:300
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:313
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:316
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:319
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:332
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:335
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:338
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:154
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:234
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:688
#: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:2408
#: src/libslic3r/PrintConfig.cpp:2417 src/libslic3r/PrintConfig.cpp:2518
#: src/libslic3r/PrintConfig.cpp:2526 src/libslic3r/PrintConfig.cpp:2534
#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2549
#: src/libslic3r/PrintConfig.cpp:2557
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:601
#: src/libslic3r/PrintConfig.cpp:1250
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:146
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:187
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:219
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:238
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:256
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:275
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:376
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:402
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:939
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:78
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:154
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:255
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:53
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:270
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:59
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:135
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:136
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:141
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:243
msgid "Add a new printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:955
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:957
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:959
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:962
#, possible-c-format
msgid ""
"Current preset is inherited from:\n"
"\t%s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:966
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:967
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:968
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:972
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:978
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:986
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:989
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1003
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1007
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1015
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1016
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1050 src/slic3r/GUI/Tab.cpp:3583
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1055
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1066
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1067 src/libslic3r/PrintConfig.cpp:1780
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1071
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1082
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1100
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1112
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1129
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1133
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1148
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1160
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1163
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1166
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1173
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1181
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1189
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1207
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1217
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1220
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1229
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:3650
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1233
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1235
msgid "Extruder clearance (mm)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1240 src/slic3r/GUI/Tab.cpp:3651
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1247 src/libslic3r/PrintConfig.cpp:1453
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1253 src/slic3r/GUI/Tab.cpp:1254
#: src/slic3r/GUI/Tab.cpp:1542 src/slic3r/GUI/Tab.cpp:1543
#: src/slic3r/GUI/Tab.cpp:2010 src/slic3r/GUI/Tab.cpp:2011
#: src/slic3r/GUI/Tab.cpp:2124 src/slic3r/GUI/Tab.cpp:2125
#: src/slic3r/GUI/Tab.cpp:3520 src/slic3r/GUI/Tab.cpp:3521
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1260 src/slic3r/GUI/Tab.cpp:1550
#: src/slic3r/GUI/Tab.cpp:2017 src/slic3r/GUI/Tab.cpp:2131
#: src/slic3r/GUI/Tab.cpp:3528 src/slic3r/GUI/Tab.cpp:3656
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1261 src/slic3r/GUI/Tab.cpp:1551
#: src/slic3r/GUI/Tab.cpp:2018 src/slic3r/GUI/Tab.cpp:2132
#: src/slic3r/GUI/Tab.cpp:3529 src/slic3r/GUI/Tab.cpp:3657
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1325 src/slic3r/GUI/Tab.cpp:1380
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1326 src/slic3r/GUI/Tab.cpp:1385
#: src/slic3r/GUI/Tab.cpp:2366
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1435 src/libslic3r/PrintConfig.cpp:2067
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1441
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1446
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1447 src/libslic3r/PrintConfig.cpp:1355
#: src/libslic3r/PrintConfig.cpp:2200
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1458
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1467
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1473
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1480
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1490
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1493
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1507
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1529 src/slic3r/GUI/Tab.cpp:1973
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1530 src/slic3r/GUI/Tab.cpp:1974
#: src/libslic3r/PrintConfig.cpp:1813 src/libslic3r/PrintConfig.cpp:1828
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1536 src/slic3r/GUI/Tab.cpp:1980
#: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1593
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1679 src/slic3r/GUI/Tab.cpp:1913
msgid "Test"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1689
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1695 src/slic3r/GUI/Tab.cpp:1926
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1713
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1726
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1727
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1755
#, possible-c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1795 src/slic3r/GUI/Tab.cpp:2039
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1800 src/slic3r/GUI/Tab.cpp:2044
#: src/slic3r/GUI/Tab.cpp:3160
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1832
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1837
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1865
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1868 src/slic3r/GUI/Tab.cpp:2336
#: src/libslic3r/PrintConfig.cpp:1326
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1898
msgid "USB/Serial connection"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1899 src/libslic3r/PrintConfig.cpp:1661
msgid "Serial port"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1904
msgid "Rescan serial ports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1926
msgid "Connection to printer works correctly."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1929
msgid "Connection failed."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1942 src/slic3r/GUI/Tab.cpp:2119
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1986 src/libslic3r/PrintConfig.cpp:143
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1992 src/libslic3r/PrintConfig.cpp:1080
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1998 src/libslic3r/PrintConfig.cpp:2093
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2004
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2076
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2091
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2092
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2098 src/slic3r/GUI/Tab.cpp:3503
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2113 src/slic3r/GUI/Tab.cpp:3499
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2184 src/slic3r/GUI/Tab.cpp:2269
#: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1146
#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1179
#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:1199
#: src/libslic3r/PrintConfig.cpp:1209
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2198
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2199
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2204
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2205
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2213
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2218
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2225
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2230
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2294 src/slic3r/GUI/Tab.cpp:2302
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2303
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2334
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2358
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2363
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2369
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2382
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2390
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2571
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2573
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2903
#, possible-c-format
msgid "Default preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2904
#, possible-c-format
msgid "Preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2921
msgid "has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2924
msgid "is not compatible with printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2925
msgid "is not compatible with print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2927
msgid "and it has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2931
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3029
msgctxt "PresetName"
msgid "%1% - Copy"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3052
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3057
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3061
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3066
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3067
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3105
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3105
msgid "delete"
msgstr ""

#. TRN  remove/delete
#: src/slic3r/GUI/Tab.cpp:3107
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3110
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3236
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3238
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3240
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3242
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3247
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3249
msgid ""
"for the left button: \tindicates a non-system (or non-default) preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3252
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3254
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3264
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3266
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3269
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3272
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3274
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3280
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3281
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3287
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3288
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#. TRN Preset
#: src/slic3r/GUI/Tab.cpp:3401
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3445
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3449
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3462 src/slic3r/GUI/Tab.cpp:3464
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3593
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3598
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3612
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3617
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:327 src/slic3r/GUI/Tab.hpp:430
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:354
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:390
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:415
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:442
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
#: src/slic3r/GUI/UpdateDialogs.cpp:183
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148
msgid "Configuration update is necessary to install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, possible-c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:286
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "No updates aviable"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:308
#, possible-c-format
msgid "%s has no configuration updates aviable."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:703
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:704
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:68 src/slic3r/Utils/OctoPrint.cpp:68
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:83
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:49
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:54
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:82 src/slic3r/Utils/Duet.cpp:137
#: src/slic3r/Utils/FlashAir.cpp:119 src/slic3r/Utils/FlashAir.cpp:140
#: src/slic3r/Utils/FlashAir.cpp:156
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:131
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:134
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:369
#: src/slic3r/Utils/FixModelByWin10.cpp:374
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:390
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:392
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:407
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:413
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:430
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:430
#: src/slic3r/Utils/FixModelByWin10.cpp:433
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:433
msgid "Model repair failed:"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:73
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:73
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:176
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:181
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:705
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:710
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:713
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:691
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/Zipper.cpp:32
msgid "undefined error"
msgstr ""

#: src/libslic3r/Zipper.cpp:34
msgid "too many files"
msgstr ""

#: src/libslic3r/Zipper.cpp:36
msgid "file too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:38
msgid "unsupported method"
msgstr ""

#: src/libslic3r/Zipper.cpp:40
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/Zipper.cpp:42
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/Zipper.cpp:44
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/Zipper.cpp:46
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:48
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:50
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:52
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:54
msgid "compression failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:56
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/Zipper.cpp:58
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:60
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/Zipper.cpp:62
msgid "allocation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:64
msgid "file open failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:66
msgid "file create failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:68
msgid "file write failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:70
msgid "file read failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:72
msgid "file close failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:74
msgid "file seek failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:76
msgid "file stat failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:78
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/Zipper.cpp:80
msgid "invalid filename"
msgstr ""

#: src/libslic3r/Zipper.cpp:82
msgid "buffer too small"
msgstr ""

#: src/libslic3r/Zipper.cpp:84
msgid "internal error"
msgstr ""

#: src/libslic3r/Zipper.cpp:86
msgid "file not found"
msgstr ""

#: src/libslic3r/Zipper.cpp:88
msgid "archive is too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:90
msgid "validation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:92
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:102
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/GCode.cpp:637
msgid "Empty layers detected, the output would not be printable."
msgstr ""

#: src/libslic3r/GCode.cpp:638
msgid "Print z"
msgstr ""

#: src/libslic3r/GCode.cpp:639
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair  the model or change its orientation on the bed."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:323
msgid "Mixed"
msgstr ""

#: src/libslic3r/Flow.cpp:55
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1630
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:934
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Print.cpp:1215
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1218
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1222
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1224
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1233
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr ""

#: src/libslic3r/Print.cpp:1240
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1253
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1258
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1260
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1262
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:1264
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:1266
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:1287
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1289
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1291
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1293
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1335
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:1361
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1370
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1373
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1384
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1392
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1396
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1418
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1423
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1580
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1602
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1610
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1634
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1638
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:613
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:625
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:631
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:646
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:653
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:760
msgid "Slicing done"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:41
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:42
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:43
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:44 src/libslic3r/SLAPrintSteps.cpp:325
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:63
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:154
msgid "Too much overlapping holes."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:163
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:209
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:382 src/libslic3r/SLAPrintSteps.cpp:391
#: src/libslic3r/SLAPrintSteps.cpp:430
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:422
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:596
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:71
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:66
msgid "Picture sizes to be stored into a .gcode and .sl1 files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:80
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:81
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:87
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:89
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:97
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:98
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:104
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:105
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:111
msgid "HTTPS CA File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:112
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:126
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:127
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:2064
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:135
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:137
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:144
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:154
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:155
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:166
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:175
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:177
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:183
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:184
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:186 src/libslic3r/PrintConfig.cpp:329
#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:984
#: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1201
#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1403
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:192
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:194
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:197 src/libslic3r/PrintConfig.cpp:780
#: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650
#: src/libslic3r/PrintConfig.cpp:1894 src/libslic3r/PrintConfig.cpp:2049
#: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2718
#: src/libslic3r/PrintConfig.cpp:2839
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:203
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:204
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:205 src/libslic3r/PrintConfig.cpp:792
#: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1282
#: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:2425
#: src/libslic3r/PrintConfig.cpp:2758
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:212
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:214
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:224
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:226
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:227 src/libslic3r/PrintConfig.cpp:609
#: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:626
#: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:661
#: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:922
#: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1135
#: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1181
#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1241
#: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1433
#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1616
#: src/libslic3r/PrintConfig.cpp:2028 src/libslic3r/PrintConfig.cpp:2154
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:234
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:235
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:242
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:243
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:250
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:251
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:261
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:262
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:276
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:277
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:294
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:295
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:303
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:304
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:309
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:310
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:317
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:318
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:326
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:335
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:342
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:343 src/libslic3r/PrintConfig.cpp:2583
#: src/libslic3r/PrintConfig.cpp:2594
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:349
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:350
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:359
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:361
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:367
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:368
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:375
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:377
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:386
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:396
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:407
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:409
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:415
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:417
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:843
#: src/libslic3r/PrintConfig.cpp:2009
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:849
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:853
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:854
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:435
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:437
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:448
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560
#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:895
#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1041
#: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1761
#: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:1951
#: src/libslic3r/PrintConfig.cpp:2111
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:459
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:904
#: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1772
#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2124
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:469
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:471
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:477
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:479
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:489
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:501
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:583
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:530
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:539
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:540
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:545
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:546
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:554
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:556
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:566
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:567
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:572
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:573
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1708
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:588
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:589
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:1247
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:598
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:607
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:608
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:615
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:616
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:623
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:624
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:632
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:633
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:640
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:650
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:651
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:659
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:660
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:667
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:668
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:672
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:678
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:679
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:686
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:687
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:694
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:701
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:702
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:710
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:2494
#: src/libslic3r/PrintConfig.cpp:2495
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:718
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:721
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:726
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:727
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:754
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:755
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:761
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:762
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2578
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:775
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:777
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:789
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:791
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:826
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:828
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:844
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:845
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:846
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:847
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:2011
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:851
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:852
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:868
#: src/libslic3r/PrintConfig.cpp:876 src/libslic3r/PrintConfig.cpp:910
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:860
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:869
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:878
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:891
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:900
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:901
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:911
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:920
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:928
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:929
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:936
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:937
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:960
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:965
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:966
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:973
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:974
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:982
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:990
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:992
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:995
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1001
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1003
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1011
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1027
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1029
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1036
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1038
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1049
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1058
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1071
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1072
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1081
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1092
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1093
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1101
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1125
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1126
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1127
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1128
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1131
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1132
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1142
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1143
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1144
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1148
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1149
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1150
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1151
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1159
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1160
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1161
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1162
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1165
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1167
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1168
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1178
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1180
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1188
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1190
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1198
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1200
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1208
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1210
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1217 src/libslic3r/PrintConfig.cpp:1226
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1218
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1227
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1237
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1238
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1248
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1257
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1269
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:1273
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1268
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1289
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1281
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1290
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1298
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1299
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1306
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1307
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1316
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1317
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1327
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1332
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1333
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1348
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1349
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1356
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1363
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1364
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1373
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1381
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1382
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1417
#: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1400
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1408
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1410
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1419
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1432
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1442
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1446
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1454
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1466
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1472
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1473
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1481
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1482
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1487
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1488
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1501
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1503
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1511
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1512
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1522
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1523
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1529
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1530
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1537
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1538
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1544
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1545
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:1556
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1552
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1553
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1561
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1562
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1569
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1570
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1571
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1578
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1579
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1580
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1596
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1589
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1597
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1605
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1606
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1612 src/libslic3r/PrintConfig.cpp:1613
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1614
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1621
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1623
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1629
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1631
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1641
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1642
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1651
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1652
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1662
msgid "USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1669
msgid "Serial port speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1670
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1680
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1687
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1688
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1695
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1696
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1697
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1706
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1715
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1717
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1727
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1729
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1730
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1738
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1744
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1746
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1758
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1769
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1781
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1787 src/libslic3r/PrintConfig.cpp:1788
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1794
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1795
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1803
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1804
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1814
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1829
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1845
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1846
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1851
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1852
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1857
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1858
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1865
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1867
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1871
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1873
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1879
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1881
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1891
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1893
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2667
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1909
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1911
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1918
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1919
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1924
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1926
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1931
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1937
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1939
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1957
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1959
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1964
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1973
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1975
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1982
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1984
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1993
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2002
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2004
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2010
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2016
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2018
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2027
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2034
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2036
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2042
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2044
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2056
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2058
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2065
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2073
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2075
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2081
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2082
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2094
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2107
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2119
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2134
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2135
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2143
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2146
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2153
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2161
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2162
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2168
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2169
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2175
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2176
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2186
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2187
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2193
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2194
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2201
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2207
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2208
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2214
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2215
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2231
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2232
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2239
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2246
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2254
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2261
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2262
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2268
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2269
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2275
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2285
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2286
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2353
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2354
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2359
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2360
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2367
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2373
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2378
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2379
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2385
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2386
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2387
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2392
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2393
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2399
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2400
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2405
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2406
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2407
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2414
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2415
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2416
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2423
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2431 src/libslic3r/PrintConfig.cpp:2432
#: src/libslic3r/PrintConfig.cpp:2433
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2439 src/libslic3r/PrintConfig.cpp:2440
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2441
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2447 src/libslic3r/PrintConfig.cpp:2448
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2449
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2462
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2473 src/libslic3r/PrintConfig.cpp:2474
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2480 src/libslic3r/PrintConfig.cpp:2481
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2482
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2487 src/libslic3r/PrintConfig.cpp:2488
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2489
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2496
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2503
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2508
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2509
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2516 src/libslic3r/PrintConfig.cpp:2517
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2524 src/libslic3r/PrintConfig.cpp:2525
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532 src/libslic3r/PrintConfig.cpp:2533
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2539 src/libslic3r/PrintConfig.cpp:2540
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2547 src/libslic3r/PrintConfig.cpp:2548
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2555 src/libslic3r/PrintConfig.cpp:2556
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2563
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2569
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2570
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2582 src/libslic3r/PrintConfig.cpp:2593
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2604
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2606
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2611
msgid "Support head front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2613
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2620
msgid "Support head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2622
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2629
msgid "Support head width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2631
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2639
msgid "Support pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2641
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2649
msgid "Support pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2650
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2658
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2659
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2660
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2672
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2674
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2683
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2685
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2693
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2695
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2702
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2705
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2715
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2717
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2725
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2727
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2734
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2736
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2744
msgid "Object elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2746
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2757
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2763
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2765
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2771
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2773
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2778
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2780
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2788
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2789
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2802
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2803
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2813
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2815
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2835
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2837
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2846
msgid "Pad around object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2848
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2853
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2855
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2860
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2862
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2871
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2873
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2880
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2882
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2889
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2892
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2899
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2901
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Hollowing thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2908
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2916
msgid "Hollowing accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2918
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2925
msgid "Hollowing closing distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3305
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3306
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3317
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3318
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3323
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3324
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3328
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3329
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3334
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3339
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3344
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3345
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3350
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3351
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3356
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3357
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3361
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3362
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3367
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3371
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3372
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3382
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3383
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3388
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3409
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3410
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3414
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3415
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3418
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3419
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3423
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3424
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3427
msgid "Merge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3428
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3433
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3437
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3441
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3442
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3446
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3447
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3452
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3457
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3460
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3461
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3470
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3471
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3474
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3475
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3479
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3489
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3490
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3493
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3494
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3500
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3501
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/PrintObject.cpp:108
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:152
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:255
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:395
msgid "Generating support material"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:347
msgid "Height (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:349
msgid "Width (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:351
msgid "Speed (mm/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:353
msgid "Fan Speed (%)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:355
msgid "Volumetric flow rate (mm³/s)"
msgstr ""