{
    "type": "process",
    "from": "system",
	"setting_id": "GP004",
    "bottom_shell_layers": "10",
    "bottom_shell_thickness": "1",
    "default_acceleration": "2000",
    "enable_support": "1",
    "gap_infill_speed": "30",
    "inherits": "fdm_process_dremel_common",
    "initial_layer_acceleration": "2000",
    "initial_layer_infill_speed": "15",
    "initial_layer_print_height": "0.05",
    "initial_layer_speed": "22",
    "inner_wall_acceleration": "2000",
    "inner_wall_speed": "40",
    "internal_solid_infill_speed": "40",
    "ironing_type": "top",
    "is_custom_defined": "0",
    "layer_height": "0.05",
    "name": ".05mm Super Detail @Dremel 3D40 0.4 nozzle",
    "outer_wall_acceleration": "2000",
    "outer_wall_speed": "30",
    "print_settings_id": ".05mm Super Detail @Dremel 3D40 0.4 nozzle",
    "raft_first_layer_density": "100%",
    "raft_first_layer_expansion": "1.5",
    "skirt_loops": "7",
    "slow_down_layers": "2",
    "sparse_infill_density": "20%",
    "sparse_infill_speed": "45",
    "support_bottom_interface_spacing": "0.68",
    "support_bottom_z_distance": "0.1",
    "support_expansion": "1.5",
    "support_interface_spacing": "0.68",
    "support_interface_speed": "40",
    "support_object_xy_distance": "1.4",
    "support_on_build_plate_only": "1",
    "support_speed": "45",
    "support_threshold_angle": "60",
    "support_top_z_distance": "0.1",
    "top_shell_layers": "10",
    "top_shell_thickness": "1",
    "top_surface_speed": "15",
    "travel_acceleration": "2000",
    "travel_speed": "100",
    "version": "1.7.0.2",
    "wall_generator": "arachne",
    "wall_loops": "3"
}