{
  "type": "filament",
  "filament_id": "GFG99",
  "setting_id": "GFSA04",
  "name": "Flashforge Generic TPU",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_filament_tpu",
  "additional_cooling_fan_speed": ["100"],
  "bed_temperature_difference": ["10"],
  "chamber_temperature": "0",
  "close_fan_the_first_x_layers": ["1"],
  "compatible_printers": [
    "Flashforge Adventurer 5M 0.4 Nozzle",
    "Flashforge Adventurer 5M 0.6 Nozzle",
    "Flashforge Adventurer 5M 0.8 Nozzle",
    "Flashforge Adventurer 5M Pro 0.4 Nozzle",
    "Flashforge Adventurer 5M Pro 0.6 Nozzle",
    "Flashforge Adventurer 5M Pro 0.8 Nozzle"
  ],
  "compatible_printers_condition": "",
  "compatible_prints": [],
  "compatible_prints_condition": "",
  "cool_plate_temp": ["60"],
  "cool_plate_temp_initial_layer": ["60"],
  "default_filament_colour": [""],
  "enable_overhang_bridge_fan": ["1"],
  "enable_pressure_advance": ["1"],
  "eng_plate_temp": ["60"],
  "eng_plate_temp_initial_layer": ["60"],
  "fan_cooling_layer_time": ["100"],
  "fan_max_speed": ["100"],
  "fan_min_speed": ["100"],
  "filament_cost": ["20"],
  "filament_density": ["1.24"],
  "filament_deretraction_speed": ["nil"],
  "filament_diameter": ["1.75"],
  "filament_end_gcode": ["; filament end gcode \n"],
  "filament_flow_ratio": ["1"],
  "filament_is_support": ["0"],
  "filament_max_volumetric_speed": ["3.5"],
  "filament_minimal_purge_on_wipe_tower": ["15"],
  "filament_retract_before_wipe": ["nil"],
  "filament_retract_restart_extra": ["nil"],
  "filament_retract_when_changing_layer": ["nil"],
  "filament_retraction_length": ["1.2"],
  "filament_retraction_minimum_travel": ["nil"],
  "filament_retraction_speed": ["nil"],
  "filament_settings_id": ["Flashforge TPU"],
  "filament_shrink": ["100%"],
  "filament_soluble": ["0"],
  "filament_start_gcode": [
    "; filament start gcode\n;right_extruder_material:TPU\n"
  ],
  "filament_type": ["TPU"],
  "filament_vendor": ["Generic"],
  "filament_wipe": ["nil"],
  "filament_wipe_distance": ["nil"],
  "filament_z_hop": ["nil"],
  "filament_z_hop_types": ["nil"],
  "full_fan_speed_layer": ["0"],
  "hot_plate_temp": ["45"],
  "hot_plate_temp_initial_layer": ["45"],
  "nozzle_temperature": ["225"],
  "nozzle_temperature_initial_layer": ["225"],
  "nozzle_temperature_range_high": ["250"],
  "nozzle_temperature_range_low": ["190"],
  "overhang_fan_speed": ["100"],
  "overhang_fan_threshold": ["50%"],
  "pressure_advance": ["0.035"],
  "reduce_fan_stop_start_freq": ["1"],
  "required_nozzle_HRC": ["0"],
  "slow_down_for_layer_cooling": ["1"],
  "slow_down_layer_time": ["8"],
  "slow_down_min_speed": ["20"],
  "support_material_interface_fan_speed": ["100"],
  "temperature_vitrification": ["60"],
  "textured_plate_temp": ["60"],
  "textured_plate_temp_initial_layer": ["60"],
  "version": "1.5.1.2"
}