{
  "type": "machine",
  "name": "fdm_machine_common",
  "from": "system",
  "instantiation": "false",
  "printer_technology": "FFF",
  "deretraction_speed": ["40"],
  "extruder_colour": ["#FCE94F"],
  "extruder_offset": ["0x0"],
  "gcode_flavor": "klipper",
  "silent_mode": "0",
  "machine_max_acceleration_e": ["5000"],
  "machine_max_acceleration_extruding": ["500"],
  "machine_max_acceleration_retracting": ["1000"],
  "machine_max_acceleration_x": ["500"],
  "machine_max_acceleration_y": ["500"],
  "machine_max_acceleration_z": ["100"],
  "machine_max_speed_e": ["60"],
  "machine_max_speed_x": ["500"],
  "machine_max_speed_y": ["500"],
  "machine_max_speed_z": ["10"],
  "machine_max_jerk_e": ["5"],
  "machine_max_jerk_x": ["8"],
  "machine_max_jerk_y": ["8"],
  "machine_max_jerk_z": ["0.4"],
  "machine_min_extruding_rate": ["0"],
  "machine_min_travel_rate": ["0"],
  "max_layer_height": ["0.32"],
  "min_layer_height": ["0.08"],
  "printable_height": "250",
  "extruder_clearance_radius": "65",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_height_to_lid": "140",
  "nozzle_diameter": ["0.4"],
  "printer_settings_id": "",
  "printer_variant": "0.4",
  "retraction_minimum_travel": ["2"],
  "retract_before_wipe": ["70%"],
  "retract_when_changing_layer": ["1"],
  "retraction_length": ["1"],
  "retract_length_toolchange": ["1"],
  "z_hop": ["0"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "retraction_speed": ["60"],
  "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "wipe": ["1"],
  "z_lift_type": "NormalLift",
  "default_print_profile": "0.20mm Standard @Flashforge AD5M",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "machine_start_gcode": "",
  "machine_end_gcode": ""
}