rtyr
615356b69c
Ender3V2 thumbnail
2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/5582
2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers
2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro
2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10
...
Parameter consistency improvements. Enabled conservative elephant foot compensation.
2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10
2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469
Creality.ini: default to Generic PLA, and move defaults to common printer section
2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777
creality.ini: enable conservative elefant_foot_compensation
...
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.
A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.
And I'd prefer to undercompensate as opposed to overcompensate
as a default.
2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93
Creality.ini: improve parameter consistency
2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5
2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6
2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format.
2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm
2020-12-08 11:12:42 +01:00
rtyr
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys.
2020-12-05 11:29:16 +01:00
rtyr
72a64c200b
Anycubic 0.0.5 Updated end g-code.
2020-12-05 11:23:07 +01:00
rtyr
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys
2020-12-05 11:19:53 +01:00
rtyr
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys
2020-12-05 11:14:27 +01:00
rtyr
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2
2020-12-05 10:21:13 +01:00
rtyr
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code.
2020-12-05 10:18:49 +01:00
rtyr
6716416add
Removed redundant line
2020-12-05 09:58:51 +01:00
rtyr
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values.
2020-12-05 09:55:07 +01:00
rtyr
ee088e219e
Creality 0.0.8
2020-12-05 09:53:05 +01:00
rtyr
c4d97d3d9b
bumped up to 0.0.8
2020-12-05 09:51:38 +01:00
Pascal de Bruijn
e3a0a8878a
creality.ini: add Extrudr PLA NX2 spool weight
2020-11-29 19:05:02 +01:00
Pascal de Bruijn
0f03b74261
creality.ini: add 3DJAKE ecoPLA spool weight
2020-11-29 12:47:48 +01:00
Pascal de Bruijn
f86dab9f36
creality.ini: slight end_gcode improvements
...
gcode order made more similar to prusa mini
2020-11-29 12:42:08 +01:00
rtyr
6d27b0f5d0
1.2.0-beta0
2020-11-28 10:35:59 +01:00
rtyr
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
2020-11-24 09:53:50 +01:00
rtyr
ee20331ead
1.2.0-alpha0 added filament spool weight
2020-11-21 15:42:38 +01:00
rtyr
9023f092ad
Creality 0.0.7 - updated start g-code
2020-11-21 10:24:54 +01:00
rtyr
a2e763d4ca
Bumped up creality bundle version to 0.0.7
2020-11-21 10:22:57 +01:00
Pascal de Bruijn
32345b9e75
creality.ini: make start_gcode robust for absolute_e
2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator
2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands
2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
2558a98636
fix spurious custom setting in Anycubic Predator profile
2020-11-14 12:27:20 +01:00
rtyr
cd2b502c38
Updated Anycubic thumbnails.
2020-11-13 13:08:09 +01:00
rtyr
2df97edcf5
Updated LulzBot thumbnails.
2020-11-12 19:20:23 +01:00
rtyr
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models.
2020-11-12 18:55:42 +01:00
rtyr
0c78573f5c
Version changed to 0.0.6
2020-11-12 18:52:48 +01:00
rtyr
868ffa21d5
Updated BIBO2 thumbnail. Removed "BETA" label.
2020-11-12 18:47:30 +01:00
Pascal de Bruijn
b9da42eb67
creality.ini: raise remaining PLA bed temperatures to 60
...
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.
With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.
Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.
https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
2020-11-12 18:26:45 +01:00
rtyr
aa32f48c9c
Updated creality thumbnails. Removed "BETA" label.
2020-11-10 17:53:49 +01:00
rtyr
cf339c5f8d
Updated thumbnails. Removed "BETA" sign.
2020-11-10 17:26:42 +01:00
rtyr
21a7a606d2
Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 16:02:34 +01:00
rtyr
1799d263b3
Merge pull request #5118 from trilab3d/master-trilab
...
Added thumbnails for new TriLAB printers
2020-11-10 15:59:49 +01:00
Matej Supik
0259c96287
Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 12:02:50 +01:00
Pascal de Bruijn
077cc1e5ff
creality.ini: Add Devil Design PLA Galaxy (Glitter)
...
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament
It even needs a slightly higher bed temp to prevent warping on
sharp corners
2020-11-09 19:27:02 +01:00
Pascal de Bruijn
9f2d8299b1
creality.ini: disable pause_print_gcode ( #4980 )
2020-11-09 18:52:01 +01:00
rtyr
b0252ba607
Merge pull request #5114 from pmjdebruijn/creality_head_bed_first
...
creality.ini: introduce slow abl variant start_gcode
2020-11-09 15:38:43 +01:00
