Vojtech Bubnik
3a75b0da7f
Update of the perimeter_acceleration tooltip
2020-11-23 09:13:58 +01:00
Vojtech Bubnik
f0606c2a76
Merge of https://github.com/prusa3d/PrusaSlicer/pull/2856
...
Add aligned rectilinear infill functionality by @m-schubert
Implements [Feature Request] Aligned rectilinear infill #1938
2020-11-21 14:10:17 +01:00
Vojtech Bubnik
25ca1fcf77
Some minor refactoring / polishing.
2020-11-21 13:16:03 +01:00
Vojtech Bubnik
56c37d5c38
Make monotonic infill default for bottom layers as well #4963
2020-11-20 18:58:54 +01:00
YuSanka
5330b34d0a
Added "Filament -> Spool weight" parameter
2020-11-20 14:31:11 +01:00
Vojtech Bubnik
8d1e13fccd
Anchoring of sparse infills can now be disabled.
2020-11-20 13:36:58 +01:00
YuSanka
03b336145f
Updated UI for the "infill_anchor" parameter
2020-11-18 17:00:08 +01:00
Vojtech Bubnik
e77fc43159
Merge remote-tracking branch 'remotes/origin/master' into lh_adaptive_infill_hooks
2020-11-16 10:54:19 +01:00
Vojtech Bubnik
4280fdb5f2
Reworked connection of infill lines to perimeter lines.
...
Added a new "infill_anchor" parameter.
2020-11-16 10:54:00 +01:00
YuSanka
d962d431c0
Localization:
...
* added missed phrases
* fixed some phrases
* updated POT-file and PO/MO-files for the CZ-translation
2020-11-12 21:35:39 +01:00
YuSanka
ed2f03ec79
Localization:
...
Some phrases are corrected in the code
The POT-file is updated
2020-11-05 22:17:49 +01:00
Vojtech Bubnik
7c571c1d9d
Merge of pull request Add support for RepetierServer #4384 by @docbobo
...
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
2020-10-28 09:51:05 +01:00
Lukas Matena
18f72d82b9
Merge branch 'pa_reprap_g10_temperature_support' of https://github.com/ardenpm/PrusaSlicer into lm_g10
2020-10-23 11:42:35 +02:00
Vojtech Bubnik
8c0b8f89d0
Updated the command line single-instance processing and help text.
...
Updated escaping of the command line arguments when passed to the other
instance.
2020-10-12 17:06:03 +02:00
Vojtech Bubnik
26b95e3c3c
Legacy conversion of "monotonous" to "monotonic"
2020-10-07 09:38:36 +02:00
Vojtech Bubnik
7fbdda9080
Renamed monotonous infill to monotonic.
2020-10-05 16:38:28 +02:00
bubnikv
8df01818dd
Limiting the application of Machine Limits
...
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
2020-10-02 17:32:03 +02:00
Vojtech Bubnik
7a799be426
DynamicPrintConfig::normalize() renamed to normalize_fdm(),
...
optimization of Print::apply()
2020-09-24 19:03:33 +02:00
Vojtech Bubnik
54976e29bb
New class ModelConfig wrapping DynamicPrintConfig and a timestamp
...
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.
Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
2020-09-24 15:34:13 +02:00
ardenpm
541c31afb0
Merge branch 'master' into pa_reprap_g10_temperature_support
2020-09-15 11:40:38 +10:00
Lukáš Hejl
f49144a9ef
Move support cubic infill to separate class.
...
Support infill is enabled in the GUI.
2020-09-10 16:53:08 +02:00
Lukáš Hejl
0d26df3cf6
Preparation for new infill
2020-09-09 14:34:04 +02:00
Vojtech Bubnik
ce06fc6cb7
Added networking support for SL1 Digest authorization.
...
Renamed login/password/authorization_type to printhost_user/printhost_password/printhost_authorization_type.
Added initialization of physical printer preset with default values.
2020-09-08 15:31:10 +02:00
bubnikv
08580a9b18
WIP: prusa-gcodeviewer command line wrapper to start the PrusaSlicer
...
in standalone G-code viewer mode.
Linux and OSX stuff will follow.
2020-09-01 16:56:12 +02:00
Paul Arden
f6d25d0634
Rework G10 temperature support to be enabled only for a new Firmware type RepRapFirmware
leaving the RepRap/Sprinter
behaviour alone. Rename the enum for gcfRepRap
to gcfRepRapSprinter
and add new gcfRepRapFirmware
enum value. Also adds code to only use the G10 searching in custom G-code if the flavour is RepRapFirmware.
2020-08-21 14:08:32 +10:00
YuSanka
a6dc3d37f5
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-08-06 17:02:48 +02:00
tamasmeszaros
8cb115a035
Add possible manipulation of small support diameter.
2020-08-03 19:05:30 +02:00
YuSanka
631b15b7d3
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-22 15:53:31 +02:00
rongith
435355adfe
Temporary ironing icon to avoid crashes on GTK
...
Ironing type and spacing can be set per-object
2020-07-22 09:11:48 +02:00
YuSanka
f138978fe7
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-21 09:47:29 +02:00
enricoturri1966
2de442b617
Pull request #4235 - Fix tick/untick ironing feature in preview by rongith
2020-07-20 13:31:39 +02:00
YuSanka
1a2926050f
PhysicalPrinter. PhysicalPrinterDialog improvements
2020-06-25 12:58:59 +02:00
YuSanka
02624689ce
Physical Printers.
...
- save/load printers
- consistency between selection on Tab and Plater
2020-06-24 08:50:01 +02:00
YuSanka
629584e28f
Editing of the custom GCodes like ColorChange and PausePrint
2020-06-07 22:42:54 +02:00
Lukas Matena
2c244732db
Introduced a limit on max print z (1.2 m)
...
A follow-up of 815989d
, related to #2877
2020-05-28 12:03:48 +02:00
Yuri D'Elia
c6f0cd5b5b
Ironingy typo
2020-05-27 14:31:17 +02:00
YuSanka
99d49a74d0
Merge remote-tracking branch 'origin/master' into ys_search
2020-04-29 14:56:31 +02:00
David Kocik
d828a1e80b
single slicer instance
...
check for other instances during startup
send message with command line arguments if found and terminate
listen for those messages and load objects from paths in messages from them
2020-04-29 10:53:48 +02:00
bubnikv
4de4d765ee
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-04-28 19:31:18 +02:00
bubnikv
ec81de7553
Ironing and Monotonous infill - first working implementation.
2020-04-28 17:19:11 +02:00
bubnikv
033548a568
Introduction of Monotonous infill type. Fill no-sort only for monotonous
...
and ironing infills.
2020-04-25 08:15:04 +02:00
tamasmeszaros
44ca0a6c3d
Add universal method to get bed shape from Config objects
2020-04-23 18:18:23 +02:00
tamasmeszaros
89d376dc35
Add min_object_distance method as free function taking ConfigBase argument
2020-04-23 18:17:37 +02:00
bubnikv
10110ed307
WIP: Ironing over top surfaces.
2020-04-14 11:53:28 +02:00
YuSanka
167f7cf5de
Added map for save Group and Category values for each option
...
+ Some code refactoring in Tab (the translation of the titles moved to the OptionGroups) and Search
+ Fixed assert in fts_fuzzy_match
2020-04-13 17:55:38 +02:00
bubnikv
1cbb822dd7
Enabled "clip multipart objects" by default, see discussion in
...
https://github.com/prusa3d/PrusaSlicer/issues/2803#issuecomment-524602137
2020-03-20 18:25:11 +01:00
bubnikv
dc1ffe15a8
Revert "Added "Filament spool weight" option to filament options"
...
This reverts commit 3d3e36ba8d
.
The change is too risky just before the PrusaSlicer 2.2.0 final release
and the feature may need a bit of polishing before release.
2020-03-14 09:49:12 +01:00
bubnikv
6b58f67fb8
"inifinit_skirt" renamed to "draft_shield"
...
Polished the tooltip for the draft shield.
Legacy conversion from old skirt_heigth == -1 to draft_shield = 1
2020-03-14 07:46:39 +01:00
YuSanka
7fd9c736b3
Implemented "Use unlimited skirt" option
2020-03-11 11:43:08 +01:00
YuSanka
3d3e36ba8d
Added "Filament spool weight" option to filament options
2020-03-09 17:01:05 +01:00