Alessandro Ranellucci
|
45c91b2ae9
|
Don't trigger extra perimeters when less than 30% of the upper loops would benefit from it. #2664. Also fixes #2610
|
2015-02-24 00:34:43 +01:00 |
|
Alessandro Ranellucci
|
e88cf466fe
|
A couple notes about infill_only_where_needed
|
2015-02-23 00:55:00 +01:00 |
|
Alessandro Ranellucci
|
2655f3f816
|
Better and more robust implementation of infill_only_where_needed
|
2015-02-23 00:44:51 +01:00 |
|
Chow Loong Jin
|
073681a50a
|
Get first_layer_extrusion_width from PrintConfig instead of PrintObjectConfig
This fixes an issue where the support material doesn't honour a custom first
layer extrusion width.
Fixes: #2662
|
2015-02-17 13:59:46 +08:00 |
|
Alessandro Ranellucci
|
c0f453f83e
|
Simpler and more robust implementation of extra perimeters. #2395
|
2015-02-15 21:58:14 +01:00 |
|
Alessandro Ranellucci
|
ba6ae12635
|
Change end_program() to postamble()
|
2015-02-15 17:09:17 +01:00 |
|
Alessandro Ranellucci
|
1180a6d83f
|
Merge pull request #2508 from strahlex/machinekit-gcode
added support Machinekit flavour GCode
|
2015-02-15 17:00:08 +01:00 |
|
Alessandro Ranellucci
|
6eb1fa36ed
|
Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656
|
2015-02-14 12:47:33 +01:00 |
|
Alexander Rössler
|
cc83e9f06d
|
using end_program() function in GCode output
|
2015-02-07 12:37:00 +01:00 |
|
Alessandro Ranellucci
|
3ae6f2630e
|
Merge branch 'master' into sender
Conflicts:
Build.PL
|
2015-02-01 14:07:32 +01:00 |
|
Alessandro Ranellucci
|
059b00a829
|
New --before-layer-change option and new layer_z placeholder. #2602
|
2015-01-30 20:08:00 +01:00 |
|
Alessandro Ranellucci
|
8605969dc5
|
Don't output slic3r:z attribute in SVG for raft layers
|
2015-01-30 18:45:30 +01:00 |
|
Alessandro Ranellucci
|
fe4f79ba90
|
Fixed regression causing random loss of infill because of corrupt thin polygons returned by Clipper. #2539
|
2015-01-30 10:12:31 +01:00 |
|
Alessandro Ranellucci
|
1d204af6f4
|
Fixed regression causing rectilinear infill to be misaligned across layers. #2566
|
2015-01-28 19:49:56 +01:00 |
|
Alessandro Ranellucci
|
229039d3b8
|
Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103
|
2015-01-19 15:31:12 +01:00 |
|
Alessandro Ranellucci
|
7b980c1dc9
|
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
|
2015-01-19 09:52:24 +01:00 |
|
Alessandro Ranellucci
|
ba4325411b
|
Bugfix: the downwards move in sequential printing was performed in the wrong spot. #2524
|
2015-01-18 22:08:43 +01:00 |
|
Alessandro Ranellucci
|
9f0283f808
|
Minor issue when dealing with files with empty layers at bottom. #2553
|
2015-01-18 12:35:05 +01:00 |
|
Alessandro Ranellucci
|
bf02062a67
|
Bugfix: random but frequent crashes after recent perimeter code refactoring
|
2015-01-14 22:55:11 +01:00 |
|
Alessandro Ranellucci
|
04aa240265
|
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
|
2015-01-13 20:55:20 +01:00 |
|
Alessandro Ranellucci
|
9ec7b43ca1
|
Merge branch 'master' into sender
Conflicts:
lib/Slic3r/GUI/Tab.pm
|
2015-01-08 22:47:43 +01:00 |
|
Alessandro Ranellucci
|
406d045ced
|
The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253
|
2015-01-08 15:22:13 +01:00 |
|
Alessandro Ranellucci
|
f0de57cbe4
|
Minor cleanup of the init_external_mp() call
|
2015-01-06 15:04:09 +01:00 |
|
Alessandro Ranellucci
|
2562070232
|
Refactored the travel/retract/avoid_crossing_perimeters logic. Several edge cases are now handled correctly. #2498
|
2015-01-06 14:52:03 +01:00 |
|
Alessandro Ranellucci
|
0f7933c4f9
|
Bugfix: pressure regulation accumulated too much retraction and didn't discharge at the end of print. Includes regression test. #2470
|
2015-01-06 00:35:39 +01:00 |
|
Alessandro Ranellucci
|
2c0d216c1a
|
More work on print controller
|
2015-01-03 23:25:55 +01:00 |
|
Alessandro Ranellucci
|
d38503bf44
|
Bugfix: downwards interface detection might cause a crash
|
2014-12-29 14:29:21 +01:00 |
|
Alessandro Ranellucci
|
e8dc981774
|
Fixes to Ooze Prevention
|
2014-12-29 00:51:27 +01:00 |
|
Alessandro Ranellucci
|
4848cb7606
|
Ported PrintObject::bridge_over_infill() to XS
|
2014-12-24 10:20:55 +01:00 |
|
Alessandro Ranellucci
|
5d3cd792eb
|
Make infill_only_where_needed idempotent. #2198
|
2014-12-24 01:29:36 +01:00 |
|
Alessandro Ranellucci
|
af446dc7d4
|
Apply contact distance to first support layer above object's top surfaces too. #1939
|
2014-12-23 22:18:43 +01:00 |
|
Alessandro Ranellucci
|
473802ce8c
|
Use support material interface extruder for layers above object's top surfaces too. #1939
|
2014-12-23 01:04:25 +01:00 |
|
Alessandro Ranellucci
|
795c85d30e
|
Apply a true double-ended nearest-neightbor search to thin fills in order to minimize travel moves between them. #2213
|
2014-12-20 22:40:43 +01:00 |
|
Alessandro Ranellucci
|
c00061678b
|
Use perimeter extruder for brim. #618
|
2014-12-17 00:45:05 +01:00 |
|
Alessandro Ranellucci
|
e79aa2e81c
|
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
|
2014-12-17 00:34:00 +01:00 |
|
Alessandro Ranellucci
|
d9cffeca4a
|
Bugfix: adjust skirt flow according to each layer's height. #2307
|
2014-12-16 18:55:16 +01:00 |
|
Alessandro Ranellucci
|
99deffef62
|
Bugfix: use the external motion planner when extruding skirt and brim. #2412
|
2014-12-16 18:13:38 +01:00 |
|
Alessandro Ranellucci
|
e9166a8fe6
|
Use a semaphore to synchronize threads instead of blocking with join(). Lock threads array in order to ensure all of them are signalled. #2394
|
2014-12-13 15:01:53 +01:00 |
|
Alessandro Ranellucci
|
360dee862b
|
Keep model objects aligned to Z = 0 in plater
|
2014-12-12 22:43:56 +01:00 |
|
Alessandro Ranellucci
|
e8ab9ac13a
|
Ported Print::bounding_box(), Print::total_bounding_box(), Print::skirt_flow(), Print:skirt_first_layer_height() to XS
|
2014-12-12 22:43:56 +01:00 |
|
Alessandro Ranellucci
|
d350241da3
|
Make combine_infill() completely idempotent. Includes unit testing
|
2014-12-08 21:23:42 +01:00 |
|
Alessandro Ranellucci
|
9a9ba02d85
|
Bugfix: infill was not correctly generated when infill_every_layers was used along with raft_layers. Includes regression test. #2396
|
2014-12-08 20:14:04 +01:00 |
|
Alessandro Ranellucci
|
eb23990d6d
|
Ported PrintObject::total_layer_count() to XS
|
2014-12-01 00:00:12 +01:00 |
|
Alessandro Ranellucci
|
c7f5753a28
|
Ported PrintObject::bounding_box() to XS
|
2014-12-01 00:00:12 +01:00 |
|
Alessandro Ranellucci
|
98cb9f0e18
|
Refactoring: moved G-code export logic into new Slic3r::Print::GCode class. Removed Slic3r::GCode::Layer class. Fixes the order of post-processing filters so that cooling buffer is applied before any other filter whose logic is affected by speeds
|
2014-12-01 00:00:11 +01:00 |
|
Alessandro Ranellucci
|
33fe53fd7c
|
Ported three PrintObject methods to XS
|
2014-11-13 00:34:56 +01:00 |
|
Alessandro Ranellucci
|
334086d605
|
Bugfix: skirt and brim were not recalculated when objects where just moved in plater
|
2014-11-12 23:28:42 +01:00 |
|
Alessandro Ranellucci
|
b69caff93c
|
Ported LayerRegion::make_slices() to XS
|
2014-11-09 16:24:07 +01:00 |
|
Alessandro Ranellucci
|
3e4c572164
|
Ported some methods including add_model_object() and apply_config() to XS
|
2014-11-09 12:25:59 +01:00 |
|
Alessandro Ranellucci
|
09fd5b4af4
|
Bugfix: adjust flow by using each support layer's height instead of a bogus one. #2269
|
2014-11-07 23:18:35 +01:00 |
|