1363 commits

Author	SHA1	Message	Date
Alessandro Ranellucci	d2152a53a0	Missing tooltip for extra perimeters	2013-03-10 12:30:43 +01:00
Alessandro Ranellucci	17cbca5e06	Factor out layer height in support material generation	2013-03-10 12:22:40 +01:00
Alessandro Ranellucci	2ab5fa9c72	Factor out layer height from combine_infill()	2013-03-10 12:08:18 +01:00
Alessandro Ranellucci	2275de9f0d	Factored out the layer height logic	2013-03-10 11:37:16 +01:00
Alessandro Ranellucci	e9c7460c11	New --bridge-acceleration option	2013-03-09 20:31:09 +01:00
Alessandro Ranellucci	2acda9973e	Don't apply acceleration settings to travel moves	2013-03-09 20:28:03 +01:00
Alessandro Ranellucci	b7b89ff7f2	Bugfix: *-acceleration options didn't work in CLI	2013-03-09 20:21:05 +01:00
Alessandro Ranellucci	460e169c67	New option to disable retraction on layer change	2013-03-09 20:05:43 +01:00
Alessandro Ranellucci	e71bf48463	Add a command to lift nozzle in default start G-code	2013-03-09 19:51:09 +01:00
Alessandro Ranellucci	d50e0af548	Make sure the inwards move after last perimeter loop doesn't exceed object boundary	2013-03-09 17:15:45 +01:00
Alessandro Ranellucci	caa79583ff	Tiny optimization	2013-03-09 17:08:17 +01:00
Alessandro Ranellucci	fa41e15c68	Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035	2013-03-09 17:07:11 +01:00
Alessandro Ranellucci	a2702082b2	Merge pull request #962 from scottp/issue_885b ... Add defaults into Tooltips from #885	2013-03-09 07:48:20 -08:00
Alessandro Ranellucci	9247b3e9f4	New --no-plater and --gui-mode options. #604	2013-03-09 16:43:09 +01:00
Alessandro Ranellucci	af50272b3b	Refactor simple mode definitions to dedicated SimpleTab classes	2013-03-09 16:27:18 +01:00
Alessandro Ranellucci	5477d66902	Advertise the expert mode in simple mode	2013-03-09 14:55:07 +01:00
Alessandro Ranellucci	46f35e39f6	Some more tweaks	2013-03-08 23:34:57 +01:00
Alessandro Ranellucci	0748e088a0	Reorder options in simple mode	2013-03-08 23:07:14 +01:00
Alessandro Ranellucci	84f4f098ca	Fix cooling and load in simple-mode. #1001	2013-03-08 22:58:28 +01:00
Alessandro Ranellucci	b901e1f6c8	Merge branch 'master' into simple-mode	2013-03-08 22:28:13 +01:00
Alessandro Ranellucci	4fc435f0fd	Bugfix: retract speed was applied to travel	2013-03-08 17:52:33 +01:00
Alessandro Ranellucci	f494335f77	Bugfix: not all the calls to travel_to() were updated	2013-03-08 13:50:50 +01:00
Alessandro Ranellucci	2f192bddca	Make tests happy	2013-03-07 16:24:25 +01:00
Alessandro Ranellucci	97e864699e	New top-infill-extrusion-width option	2013-03-07 16:00:58 +01:00
Alessandro Ranellucci	36d24ccb0b	Infill refactoring and cleanup complete	2013-03-07 15:47:32 +01:00
Alessandro Ranellucci	d928f005e6	Some incomplete work for cleaner infill logic	2013-03-05 20:03:46 +01:00
Alessandro Ranellucci	a9df56670f	Bugfix: internal-bridge regions were not touching perimeters	2013-03-05 19:33:06 +01:00
Alessandro Ranellucci	37810f777f	Make only_retract_when_crossing_perimeters work with avoid_crossing_perimeters	2013-03-05 17:30:27 +01:00
Alessandro Ranellucci	72613ae2b4	Enable only_retract_when_crossing_perimeters by default	2013-03-05 15:01:45 +01:00
Alessandro Ranellucci	70092a9cf5	Apply only_retract_when_crossing_perimeters to all infills	2013-03-04 23:37:58 +01:00
Mike Sheldrake	28467b68e0	typo - fix wrong bridge direction #621 ... fixes two out of three reported in #621 (but not the first one) likely the same issue in #706 and #1003	2013-02-27 15:16:07 -08:00
Alessandro Ranellucci	a6243124a9	Merge pull request #984 from giseburt/origin_master ... Fix for Replicator 1 not finishing builds.	2013-02-27 02:37:45 -08:00
Alessandro Ranellucci	fafad0fd81	Code for memory usage statistics	2013-02-27 11:26:52 +01:00
Alessandro Ranellucci	bb83f070ae	Load threads::shared before Wx. #1018	2013-02-27 11:08:08 +01:00
Alessandro Ranellucci	919d1131f8	Use nearest-neighbor search for internal perimeters too. #1025	2013-02-27 11:04:14 +01:00
Alessandro Ranellucci	c3d90a1ff8	Rename $layer to $layerm in Slic3r::Fill too for consistency	2013-02-27 10:44:42 +01:00
Alessandro Ranellucci	a9090688f9	Refactor bridge flow to Slic3r::Flow::Bridge class	2013-02-27 10:43:50 +01:00
Alessandro Ranellucci	d00c2882c4	Remove debug line slipped into last commit	2013-02-27 10:30:05 +01:00
Alessandro Ranellucci	bf9fe1b505	Bugfix: internal bridge surfaces were incorrectly merged with other internal solid surfaces, causing suboptimal results	2013-02-27 01:30:32 +01:00
Alessandro Ranellucci	8ce7b13db5	Fixed regression in is_printable() - needs unit test	2013-02-26 20:54:40 +01:00
Alessandro Ranellucci	37be4f7319	Some cleanup for detect_surfaces_type()	2013-02-26 20:52:13 +01:00
Alessandro Ranellucci	f4e8cdbf36	Better logic for extra perimeters	2013-02-26 20:00:05 +01:00
Alessandro Ranellucci	038737abe6	Bugfix: minimum flow for low layer heights was still too low	2013-02-26 14:15:05 +01:00
Alessandro Ranellucci	7412d4a687	Bugfix: manifoldness error triggered with multi-volume AMF files. #1019	2013-02-24 18:17:08 +01:00
Alessandro Ranellucci	bd76e7677c	Adjust extra perimeters	2013-02-24 17:04:19 +01:00
Alessandro Ranellucci	c3dde74776	Fix brim and extra perimeters after recent changes to ->slices	2013-02-24 16:40:14 +01:00
Alessandro Ranellucci	de0c2febd9	Remove useless lines	2013-02-23 23:50:46 +01:00
Alessandro Ranellucci	08a72c0824	Use bridge math for the first solid infill layer above sparse infill. #240	2013-02-23 21:39:13 +01:00
Alessandro Ranellucci	3b1e921171	Slight changes to the defaults	2013-02-23 19:14:41 +01:00
Alessandro Ranellucci	0634437364	Keep the full geometries in $layer->slices, including thin walls	2013-02-23 18:21:29 +01:00