Vojtech Bubnik
ee15f00574
FDM backend refactoring: Return PrintRegion by reference, not by pointer.
...
Added PrintRegion hashing.
2021-05-05 18:13:58 +02:00
Vojtech Bubnik
7d4b3f2992
Fix of safety_offset() after ClipperUtils refactoring.
...
Fixes Solid infill where there should be none #6482
Also the safety offsetting was revised to be enabled only where needed,
the "do safety offset" is now easy to discover by
a new ApplySafetyOffset::Yes enum, and safety offset over union, which
is better done by offset() / offset_ex() has been replaced with
new union_safety_offset() / union_safety_offset_ex() functions, which
better convey their meaning and which could be better optimized than
union() with the safety offset applied.
2021-05-05 12:16:47 +02:00
Vojtech Bubnik
fd3dd1611c
Fixed alignment of sparse infill over multiple layers of the same region,
...
which was broken with 68666de521b1cb15e41ac6728c0e8d3b4b0d4ed0
"Reworked the "new" bridging to respect the bridge_flow_ratio
by maintaining extrusion spacing, but modifying the extrusion width
and / or height."
2021-05-04 18:27:53 +02:00
Vojtech Bubnik
f01f02154c
Reworked the "new" bridging to respect the bridge_flow_ratio
...
by maintaining extrusion spacing, but modifying the extrusion width
and / or height.
2021-03-15 09:55:56 +01:00
Vojtech Bubnik
ceea9de8b8
WIP: Refactored bridging flow from normal flow, new config value
...
'thick_bridges' to switch between the Slic3r vs. S3D/Cura/Ideamaker
way of printing 1st object layer over supports.
Simplified the PresetHints.
2021-03-15 09:55:56 +01:00
Vojtech Bubnik
bdd6685566
Reduction of dead code in FDM infill.
2021-02-11 12:24:10 +01:00
Vojtech Bubnik
9d479fcfb9
Make clang happy about the indentation
2021-02-11 12:06:12 +01:00
Vojtech Bubnik
e026ed8718
Experimental: Switching all solid infills from Rectilinear to Monotonic
...
for regions with Monotonic top infill type.
This should likely implement Monotonic of last layer before ironing #4939
2021-02-11 11:15:14 +01:00
Vojtech Bubnik
039cf8f423
Fix of unnecessary splitting of solid fill surfaces.
...
This is a regression issue introduced in PrusaSlicer 2.3.0 with
the configurable anchoring.
2021-02-11 10:42:05 +01:00
Vojtech Bubnik
770d8b5d08
Finishing the "Iron all surfaces" feature.
...
Fixes Ironing all solid surface does not seem to work #5703
2021-02-09 18:49:33 +01:00
Lukas Matena
2d32c80b75
Fixing GCC warnings 2
2021-01-29 10:46:52 +01:00
Vojtech Bubnik
62bdc192d8
Fix of [2.3.0-alpha4] Crash - several models cause crash when slicing #5208
...
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
2020-11-24 16:01:08 +01:00
Vojtech Bubnik
8d1e13fccd
Anchoring of sparse infills can now be disabled.
2020-11-20 13:36:58 +01:00
Vojtech Bubnik
a864d584a6
Fillers: Renamed Rectilinear2 to Rectilinear.
2020-11-16 13:24:57 +01:00
Vojtech Bubnik
4280fdb5f2
Reworked connection of infill lines to perimeter lines.
...
Added a new "infill_anchor" parameter.
2020-11-16 10:54:00 +01:00
Vojtech Bubnik
7fbdda9080
Renamed monotonous infill to monotonic.
2020-10-05 16:38:28 +02:00
Vojtech Bubnik
7e756b20e6
Adaptive infill: Reshuffled the namespaces.
2020-09-18 10:53:50 +02:00
Vojtech Bubnik
37c5fe9923
Refactoring of adaptive cubic / support cubic:
...
1) Octree is built directly from the triangle mesh by checking
overlap of a triangle with an octree cell. This shall produce
a tighter octree with less dense cells.
2) The same method is used for both the adaptive / support cubic infill,
where for the support cubic infill the non-overhang triangles are
ignored.
The AABB tree is no more used.
3) Optimized extraction of continuous infill lines in O(1) instead of O(n^2)
2020-09-17 18:39:28 +02:00
Lukáš Hejl
f49144a9ef
Move support cubic infill to separate class.
...
Support infill is enabled in the GUI.
2020-09-10 16:53:08 +02:00
Lukáš Hejl
33121b705a
Change in passing octree struct
2020-09-09 14:40:08 +02:00
Lukáš Hejl
0d26df3cf6
Preparation for new infill
2020-09-09 14:34:04 +02:00
bubnikv
ec81de7553
Ironing and Monotonous infill - first working implementation.
2020-04-28 17:19:11 +02:00
bubnikv
033548a568
Introduction of Monotonous infill type. Fill no-sort only for monotonous
...
and ironing infills.
2020-04-25 08:15:04 +02:00
bubnikv
10110ed307
WIP: Ironing over top surfaces.
2020-04-14 11:53:28 +02:00
bubnikv
7f376fa927
Fix of infill type update with vase mode enabled after change
...
of the number of bottom layers.
related to [2.2.1-RC] Vase mode prints base no matter what #3823
2020-03-14 11:59:50 +01:00
Lukas Matena
b67d8c1614
Fixed memsetting non-trivially-copyable types
...
Types stl_stats, stl_normal and SurfaceFillParams should not be zeroed by memset
This is not correct and also triggered warnings on gcc
2019-09-24 17:09:07 +02:00
bubnikv
413e737d7e
Fix of previous infill refactoring.
2019-09-10 19:08:04 +02:00
bubnikv
735f5146e9
Fix of d146a0237e
...
(reworked infill generator to merge regions with the same properties).
2019-09-09 16:44:29 +02:00
Lukas Matena
6cc29c308c
Fill.cpp: Fixed a typo
2019-09-05 16:03:44 +02:00
bubnikv
d146a0237e
WIP: Reworked the infill generator to merge areas with the same
...
properties.
Note for Vojtech:
Review src/libslic3r/Fill/Fill.cpp once again,
add test for G-code generator properties (extrusion speed, cooling?)
Fixes Modifier slice/move efficiency #1005
2019-09-04 16:11:16 +02:00
bubnikv
35b3fd3176
Integrated the new layer height spans with configs into the backend.
...
Fixed some compiler warnings.
2019-06-20 16:15:09 +02:00
bubnikv
ab30370fb4
Split the external infill pattern to separate top / bottom config values.
...
Based on f9344a00e3#475 , #479 , #1133 , #1474
2019-02-22 15:25:35 +01:00
bubnikv
3b72748489
Removed the STDMOVE macro.
2018-11-02 20:45:23 +01:00
bubnikv
0558b53493
WIP: Moved sources int src/, separated most of the source code from Perl.
...
The XS was left only for the unit / integration tests, and it links
libslic3r only. No wxWidgets are allowed to be used from Perl starting
from now.
2018-09-19 11:02:24 +02:00
