This placeholder can be used for smooth timelapse of i3 type printers.
Change-Id: I953a437a7733835d850812565ff5f31b83292912
(cherry picked from commit 5d5b528541490a9ef762fdad6590b6cddeee2a5b)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
(cherry picked from commit 2b07c1154f4a009612f951938e7865dc338b2d9b)
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
(cherry picked from commit 7cbd0b35671518636dcca173220b25f6dc18ec1f)
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
pa calibration for 3rd party printer and retraction calibration
Change-Id: Ifeb12807cdce366c9d265a0490b320224dfb23fe
(cherry picked from commit 732adceeef43c9c957468ab490f0e3ee20f3173b)
Enable label object when does not print with multi
filament and object number is smaller than 65
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id670c6a5258f266076bc0a52c50ab5a28386f242
(cherry picked from commit 40248347908788ce6303ed255826011127d8eaa3)
