2 commits

Author	SHA1	Message	Date
Ian Bassi	eba08bf727	Wiki Update 7 (#10007) ... * Large images optimizations * Add image and update instructions for junction deviation Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions. * Update README links to Wiki * Fix Wiki image paths + Typos * Fixes, typos and Infill improvements * Update VFA calibration guide and add resonance avoidance Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration. * Add surface density setting to top/bottom shells docs * Ironing Wiki Wip * Wall and surfaces wiki wip * Fix top/bottom link * Better topbottom reddirect * bridging wiki wip * Fix TOP bottom * Wall wiki wip * strength advanced wiki wip * speed advance renaming * inital speed wiki wip * Other Layer Speed Wiki Wip... * Speed overhang Wiki WIP * Travel speed wiki wip * Speed acceleration wiki wip * Update speed_settings_initial_layer_speed.md * Jerk Wiki Wip * support wiki wip * Raft wiki wip * support filamnet wiki wip * Support ironing wiki wip * Support advanced Wiki Wip * Tree wiki wip * STL images optimizations * Prime tower wiki wip * Update PA line diagram images Were bigger than original used to crop this ones. * Ooze wiki wip * Flush wiki wip * Image optimizatios * Clarify TPMS-D infill description Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * images+++ * Multimaterial advanced Wiki Wip * Skirt Wiki Wip * Brim wiki wip * Add Junction Deviation formula to documentation Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Others special mode Wiki Wip Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Fix links * Fill Multiline infill Wiki Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines. * Multiline infill wiki update Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Multiline Tab.cpp * Gcode output Wiki Wip * Others wiki wips * Home quality * Add process links in home * Quality Basic Missing descriptions * Update quality_settings_bridging.md * basic desc * basic advance strentgth * Basic speed * basic other speeds * Fix link * Update speed_settings_overhang_speed.md * Update speed_settings_travel.md * Update speed_settings_acceleration.md * Fix * Expand documentation for acceleration and jerk settings * Support wiki * Raft wiki * Support wiki desc * Prime tower wiki * Multimaterial wiki desc * Filament to features wiki * Ooze improve * Fix duplicate text * Fix typo in volumetric speed calibration guide Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation. * centeres image * Overlapping gif * Others wiki basic desc * Clarify retraction calibration recommendation Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Links in Readme + minor change Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity. * Add SVG icons to infill pattern comparison table * Delete doc/images/gui directory remplaced with GUI * Create process-preset-full.png --------- Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>	2025-07-08 08:53:53 +08:00
Ian Bassi	4ec16fd714	Wiki Update part 5 (#9873) ... * BASE * precise wall and z moved * PolyHoles * Arc-fitting * X-Y Compensation * Elephant foot + moved images * Update quality_settings_precision.md * Wall generator and more * Full Reorder * TPMS-D bases * Update strength_settings_infill.md * Image Fix + Infill desc calculator * Descriptions + image fix Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Update cornering-calib.md * minor fixes * Wip updated * Missing fills * Update infill_desc_calculator.xlsx * Update infill_desc_calculator.xlsx * Update infill documentation and images Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout. * Revise infill pattern documentation and add comparison table Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes. * Indentation in code examples Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document. * Update 3D Honeycomb infill strength ratings Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes. * Formatting and fix in ERS documentation Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability. * Fix wall generator doc link and filename Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency. --------- Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>	2025-06-20 10:19:48 +08:00

Renamed from doc/Localization_guide.md (Browse further)