Change-Id: Iefca6b814368553d51b13e71a6851c12eeee8f4c
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 4b8623cce58baf0e94e84a521a3a847459e86bb4)
Change-Id: Icacd3f248a8f4dbff6c928e666f986c62801eebd
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 6074340b1c3bd49b7e767384116fa73e96cd4ba9)
Change-Id: Ib3e0cdfa10ae19c3f5543328e211bce7ff20693a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 24e513a89f2346e9187853cd02f8e5d73eeb8075)
Change-Id: I151eb7ecabb1e5a8a2af95294cc03ffe92f6b660
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 6d02a722798302c8648a62d86bcddc2650a47ea4)
Change-Id: I886c4dbcaf5bf7451a6c24c867bd3c6286cc0b3e
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 9f442418783c5559f7e8dd40bf800e88ebfdcf52)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
after binding the printer in device page
jira: 4080
Change-Id: I8e712389bf619b177255111766c271cb9f1bf66e
(cherry picked from commit a012b3641713d7f1e3ae60688c2db8054d3cd731)
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
1. move the global functions to Model
2. set brim automation paremeters before process
JIRA: STUDIO-4208
Change-Id: I3f75175ec74d214ca2a6d5f3ade56d08e0ecd4f3
(cherry picked from commit bcc88bc01ec396e8fb8af1186b47a75cd5116f3c)
JIRA: STUDIO-4177
different printer may have different hms wiki page
Change-Id: I0f4443580466ab1afc1fe16da6f5ed924e5d201d
Signed-off-by: Stone Li <stone.li@bambulab.com>
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
