tamasmeszaros
e6bdec4aa5
Remove wrapper around std::mt19937
2020-01-15 17:44:15 +01:00
bubnikv
8e5ba5ccc5
Added synonyms to some PrintSteps:
...
psWipeTower now equals to new psToolOrdering indicating that
the ToolOrdering has been calculated (only if non-sequential mode is active).
psBrim now equals to new psExtrusionPaths
psExtrusionPaths shall be the last step before psWipeTower, indicating
that all the printing extrusions are calculated for the G-code preview
slider to edit the custom per print_z color changes, tool changes etc.
2020-01-15 16:20:16 +01:00
YuSanka
15f873dd74
DoubleSlider: Implemented code for check of used extruders for MustiAsSingle mode
2020-01-15 15:35:56 +01:00
Enrico Turri
62e60bcb43
Six degrees of freedom camera - 1st installment
2020-01-15 12:49:34 +01:00
bubnikv
2c958c021d
Fixed regression in placement of Color Change event at the correct layer.
2020-01-14 17:35:42 +01:00
bubnikv
10d1b459bb
Fix of
...
Skirt loops not being honored, only producing single loop #2193
First layer skirt only has half the loops when using multiple extruders #469
The skirt generator used to prime all printing extruders at the 1st layer
if enough skirt lines were configured, while at the other layers the skirt
used to be printed with the 1st extruder printing the layer.
There was a bug introduced quite a long time ago, where not enough skirt
lines were extruded if some extruders were not needed to print the 1st layer.
Newly the skirt generator works the same way on all layers:
All the extruders planned to print a layer are primed over the skirt
if enough skirt lines are configured.
2020-01-14 16:38:34 +01:00
bubnikv
390376daae
Fix of recent refactoring of color print.
2020-01-14 16:11:03 +01:00
Lukas Matena
fd6c9582d5
Refactoring fix: making sure that mark_wiping_extrusions doesn't report it wiped something it didn't
2020-01-14 15:43:43 +01:00
bubnikv
ab6a2b71e8
Another bugfixes of GCode export after refactoring.
2020-01-14 15:12:45 +01:00
bubnikv
b54ce0d468
Fixing GCode Skirt generator after refactoring.
2020-01-14 14:24:38 +01:00
bubnikv
c96fc5eb51
gcc & clang do not like taking reference of const temporaries.
2020-01-14 12:10:01 +01:00
bubnikv
98e49772ed
Custom G-code references are now being assigned to ToolOrdering::LayerTools()
...
and the superfluous M600 (color change) events are filtered out there.
Fixed a handful of compiler warnings.
2020-01-14 11:54:09 +01:00
tamasmeszaros
e6244f7bdb
Eliminate use of uninitialized variable.
2020-01-14 10:48:22 +01:00
tamasmeszaros
ce49f0a294
Test sla support point generation determinism with seed parameter
2020-01-14 10:48:22 +01:00
tamasmeszaros
6205524d75
Make support point generator deterministic.
2020-01-14 10:48:22 +01:00
tamasmeszaros
90fbbf401f
Refactor model facing support generation.
...
Fix for touching junction when adding aux pillars.
Fix issue with overly long support bridges.
2020-01-14 10:48:22 +01:00
tamasmeszaros
45220e26c0
Fix zero elevation support maneuvers and comment to clarify the alg.
2020-01-14 10:48:22 +01:00
Lukas Matena
d0d73e6109
Hollowing config values contain min/max values, these are respected when setting through the gizmo
...
Rendering and hole transformation fixes (still WIP, though)
2020-01-14 10:33:10 +01:00
bubnikv
8bfc986fa7
Refactoring of GCode::process_layer().
...
Refactoring of GCode export of color changes, extruder switches etc,
so that the "color change" like extruder switches are applied first
at the Wipe Tower / G-code export, so that adding / removing
an extruder switch at the G-code preview slider does not invalidate
slicing.
2020-01-14 10:31:18 +01:00
bubnikv
79d7a0130f
Fixing some missing throw statements.
...
Adding noexcept to move constructors / operators.
2020-01-13 17:41:40 +01:00
Enrico Turri
91acbd01ed
Fixed GCodeAnalyzer and GCodeTimeEstimator to avoid artifacts while rendering toolpaths due to numerical issues on extruder coordinate
2020-01-13 15:27:37 +01:00
bubnikv
9038dc21e8
Fixing regression issue after G-code export refactoring.
2020-01-10 15:51:35 +01:00
bubnikv
702a489b03
Fixing compilation isue on non-MS compilers.
2020-01-10 11:53:39 +01:00
bubnikv
15eedef74b
Refactoring of ToolOrdering (wipe into infill / object)
...
Refactoring of GCode::_do_export()
Helper lower_bound and search functions similar to std, but without
needing the value object explicitely.
2020-01-10 11:27:04 +01:00
bubnikv
cc2b9b8849
ToolOrdering: Removed unused parameter.
2020-01-10 11:27:04 +01:00
Lukas Matena
f22961edae
Fixed a raycaster problem with handling duplicate hits from igl
...
The duplicate hits confused winding number calculations in the raycaster, which in turn returned incorrect hit.
2020-01-09 14:09:26 +01:00
bubnikv
5bb9ba64c2
Fix of previous commit
2020-01-09 10:14:50 +01:00
bubnikv
de70adca9c
Optimization of G-code export: Don't make copies of ExtrusionEntities
...
when sorting them into Extruders / Islands / Regions.
2020-01-09 10:00:48 +01:00
tamasmeszaros
578fcbc37c
Performance improvements in raycaster
2020-01-08 17:12:06 +01:00
tamasmeszaros
bb62f36df3
Add tests for EigenMesh3D raycaster with hole support.
...
Tests fail! Supports are intersecting the object when holes are added.
2020-01-08 17:11:22 +01:00
YuSanka
0aaa7dd076
Small fix for 3e0690b37b
2020-01-08 15:44:39 +01:00
bubnikv
3e0690b37b
Further optimizations of G-Code generator when Wipe into object / infill:
...
Don't do unnecessary tests if it is known that there is
no Wipe into object or infill active.
2020-01-08 15:16:31 +01:00
bubnikv
e0811e4aa5
Optimization of G-code export:
...
1) Don't allocate ExtruderOverrides if not necessary
2) Use boost::container::small_vector<int32, 3) for ExtruderOverrides
(usually less than 4 instances are printed))
2020-01-08 14:58:24 +01:00
Enrico Turri
abd432e7a8
Configurable paths export (fullpath or not) to 3mf and amf
2020-01-08 11:11:38 +01:00
tamasmeszaros
a3a99d7a07
Do not translate the normal of drainhole points.
2020-01-08 10:49:54 +01:00
tamasmeszaros
f874b61881
Transform the position AND the normals of drainhole points
2020-01-08 10:10:24 +01:00
bubnikv
81187e7e0e
Some refactoring and const correctness fixes.
2020-01-07 14:35:43 +01:00
Enrico Turri
5b2e2fe7b3
Fixed artifacts on toolbar and gizmobar icons showing up when changing screen or toolbar scale factors
2020-01-07 12:40:03 +01:00
Lukas Matena
0551411c48
Merge branch 'master' into lm_tm_hollowing
2020-01-06 12:41:29 +01:00
Enrico Turri
cc7b0297a0
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-01-06 12:11:07 +01:00
Enrico Turri
c790e2ff7c
Added unit test for checking geometry after save+load to 3mf cycle
2020-01-06 12:10:57 +01:00
Lukas Matena
68d0f5b4ef
Corrected description of --loglevel parameter on command line output
2020-01-06 12:07:23 +01:00
Spencer Owen
e7b835dc52
Add Astrobox to Print Host options
2020-01-06 03:37:35 -05:00
bubnikv
5294c85dfc
Some minor polishing of Color print back end.
2020-01-06 09:32:13 +01:00
bubnikv
9406b50447
Const correctness improvements:
...
removed some unnecessary const_casts that remove const.
2020-01-03 16:33:04 +01:00
Enrico Turri
80ef0e0334
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-01-03 14:43:02 +01:00
Enrico Turri
83cbe1dd33
3DConnexion devices' Y axis used for zoom in/zoom out
2020-01-03 14:42:52 +01:00
bubnikv
3d17543d40
Fix of "Don't use bridging perimeters on top of elephant-foot compensation #3011 "
...
If the Elephant foot compensation is applied to the 1st object's layer,
the uncompensated 1st object's slice is newly used for calculation
of bridges, overhans, skirt, brim, raft and supports.
Layer::slices were renamed to Layer::lslices to simplify reading
of the code, to differentiate from LayerRegion::slices.
2020-01-03 14:07:31 +01:00
Enrico Turri
3d5e32a876
#3435 - Added object's instances count into Slic3r_PE_model.config inside exported .3mf files
2020-01-02 11:37:50 +01:00
bubnikv
0808c8fa3c
Refactoring and documentation of check_copy() and copy_file()
2019-12-22 11:11:48 +01:00
