Alessandro Ranellucci
ecd054a57c
Don't emit T0 at the beginning of the file, so that it's generated automatically just right before starting the print
2012-10-28 17:29:01 +01:00
Alessandro Ranellucci
ccb49a8439
Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea)
2012-10-28 16:59:20 +01:00
Alessandro Ranellucci
cee3864fc9
Independently set number of top/bottom solid layers. #676
2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
31c2e50fc6
Bugfix: bed temperature wasn't being set after the first layer when first layer bed temperature was set to zero. #760
2012-10-24 22:57:19 +02:00
Alessandro Ranellucci
50f6909475
Don't apply slowdown factor to bridges. #640
2012-10-24 22:55:03 +02:00
Alessandro Ranellucci
355031fe2f
Remove unnecessary retractions
2012-10-24 19:38:18 +02:00
Alessandro Ranellucci
44016b38c5
Distribute skirt loops across all extruders
2012-10-24 19:13:40 +02:00
Alessandro Ranellucci
c793a2657f
Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722
2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
f5f9574173
Merge pull request #722 from mesheldrake/remove-dups-before-hull
...
use remove_coinciding_points before convex_hull
2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
769134bb6f
Fixed regression causing skirt ignoring the first layer extrusion width override. #728
2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7
If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer
2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
22b312395a
Fix SVG/DLP support material. #673
2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
f50b0040ef
Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639
2012-09-28 15:27:33 +02:00
Mike Sheldrake
4b91496edd
use remove_coinciding_points before convex_hull
...
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
2012-09-27 06:47:38 -07:00
Alessandro Ranellucci
bbe0a45b58
Optimization: cache scaled flow width and spacing
2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db
Rename materials to regions
2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8
Assign extruders and flows to materials
2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb
Fix positioning and other things
2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243
More work (breaks centering and internal surfaces detection)
2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613
Large refactoring to allow processing multimaterial files
2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b
Refactoring: move the 'copies' property to each Print::Object
2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
037be34b7b
Bugfix: removed fatal error when generating SVG support material in some circumstances. #673
2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
e40f32995f
Finish GUI decoupling
2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
757515ba17
New [print_preset], [filament_preset] and [printer_preset] variables. #675
2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
6adf98edaf
Fix regression causing SVG/DLP support material to crash the application. #668
2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
37ae2e1e2d
Use support material extruder for brim. #653
2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
47c5d410ea
Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655
2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
94a096f1d2
Support legacy config files not containing first_layer_height #631
2012-09-21 15:04:11 +02:00
Alessandro Ranellucci
191de5d078
Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage)
2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
f90520ed06
Refactoring: new Slic3r::Model class to represent files
2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
9bd1b0f6ba
Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637
...
This reverts commit 08270022dd
2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd
Refactoring: initialize all layers at once and avoid duplication of slicing height math
2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
a1ac866b84
Refactoring: turn x_length and y_length in size
2012-08-25 20:14:01 +02:00
Alessandro Ranellucci
896641cb7e
Fixed regression causing some bridges not to be detected correctly. #629
2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
b35c41c1a3
Bugfix: retraction was still not working correctly at tool change
2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
4bddb66513
Always emit T0 at the beginning of a multi-extruder print
2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
075213c731
Refactoring: make 'retracted' an attribute of the Extruder object
2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
3c2464abf9
Bugfix: crazy temperatures were written when using sequential printing. #625
2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c
Bugfix: brim was positioned incorrectly if no skirt was enabled. #627
2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
0f327ef912
Add missing use File::Spec
2012-08-07 23:37:16 +02:00
Alessandro Ranellucci
c7858912d8
Bugfix: some paths were not considered when generating brim
2012-08-07 22:04:58 +02:00
Alessandro Ranellucci
63e77fcfd8
Refactor extruder settings
2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
b7d8444ac8
Take support material into account when generating brim. #490 #501 #567
2012-08-06 20:54:49 +02:00
Alessandro Ranellucci
9bfa4118a1
Bugfix: brim and skirt collision was not precisely detected when they had similar offsets. #548
2012-08-06 20:27:10 +02:00
Henrik Brix Andersen
0e620f3ad2
Make --output accept directories. #535
2012-08-01 17:12:16 +02:00
Henrik Brix Andersen
83fccf0875
Fix auto-arrange of objects
2012-07-30 19:30:41 +02:00
Alessandro Ranellucci
4c33eabc6e
Slicing from plater was still using the default options
2012-07-29 17:02:46 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
1d04e15b63
Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity.
2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
3edf42e98e
Little workflow simplification
2012-07-21 15:53:38 +02:00
