* Wiki Home
Fix process-others
VFA test
* Add wall GIFs and update documentation
* Quality Overhangs Wiki Basic
Update README.md
Update Home.md
* Better only one wall
* Add infill ghosting image and update wall order
* Updates process options
* Fix calibration step numbering in documentation
Corrected the step numbers in the calibration order list to maintain sequential order.
* Update Calibration.md
* Update wall and surface quality docs with images and details
* Revise Linux build instructions and restructure sections
Co-Authored-By: cefiar <cefiar@gmail.com>
* APA Clarify compatibility notes
Co-Authored-By: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com>
* Removed Tolerance test from calibration guide. Keeped as note
Co-Authored-By: Noisyfox <timemanager.rick@gmail.com>
* Copilot Review
---------
Co-authored-by: cefiar <cefiar@gmail.com>
Co-authored-by: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Large images optimizations
* Add image and update instructions for junction deviation
Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.
* Update README links to Wiki
* Fix Wiki image paths + Typos
* Fixes, typos and Infill improvements
* Update VFA calibration guide and add resonance avoidance
Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.
* Add surface density setting to top/bottom shells docs
* Ironing Wiki Wip
* Wall and surfaces wiki wip
* Fix top/bottom link
* Better topbottom reddirect
* bridging wiki wip
* Fix TOP bottom
* Wall wiki wip
* strength advanced wiki wip
* speed advance renaming
* inital speed wiki wip
* Other Layer Speed Wiki Wip...
* Speed overhang Wiki WIP
* Travel speed wiki wip
* Speed acceleration wiki wip
* Update speed_settings_initial_layer_speed.md
* Jerk Wiki Wip
* support wiki wip
* Raft wiki wip
* support filamnet wiki wip
* Support ironing wiki wip
* Support advanced Wiki Wip
* Tree wiki wip
* STL images optimizations
* Prime tower wiki wip
* Update PA line diagram images
Were bigger than original used to crop this ones.
* Ooze wiki wip
* Flush wiki wip
* Image optimizatios
* Clarify TPMS-D infill description
Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* images+++
* Multimaterial advanced Wiki Wip
* Skirt Wiki Wip
* Brim wiki wip
* Add Junction Deviation formula to documentation
Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Others special mode Wiki Wip
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Fix links
* Fill Multiline infill Wiki
Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.
* Multiline infill wiki update
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Multiline Tab.cpp
* Gcode output Wiki Wip
* Others wiki wips
* Home quality
* Add process links in home
* Quality Basic Missing descriptions
* Update quality_settings_bridging.md
* basic desc
* basic advance strentgth
* Basic speed
* basic other speeds
* Fix link
* Update speed_settings_overhang_speed.md
* Update speed_settings_travel.md
* Update speed_settings_acceleration.md
* Fix
* Expand documentation for acceleration and jerk settings
* Support wiki
* Raft wiki
* Support wiki desc
* Prime tower wiki
* Multimaterial wiki desc
* Filament to features wiki
* Ooze improve
* Fix duplicate text
* Fix typo in volumetric speed calibration guide
Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.
* centeres image
* Overlapping gif
* Others wiki basic desc
* Clarify retraction calibration recommendation
Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Links in Readme + minor change
Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.
* Add SVG icons to infill pattern comparison table
* Delete doc/images/gui directory
remplaced with GUI
* Create process-preset-full.png
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* BASE
* precise wall and z moved
* PolyHoles
* Arc-fitting
* X-Y Compensation
* Elephant foot + moved images
* Update quality_settings_precision.md
* Wall generator and more
* Full Reorder
* TPMS-D bases
* Update strength_settings_infill.md
* Image Fix + Infill desc calculator
* Descriptions + image fix
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Update cornering-calib.md
* minor fixes
* Wip updated
* Missing fills
* Update infill_desc_calculator.xlsx
* Update infill_desc_calculator.xlsx
* Update infill documentation and images
Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout.
* Revise infill pattern documentation and add comparison table
Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes.
* Indentation in code examples
Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document.
* Update 3D Honeycomb infill strength ratings
Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes.
* Formatting and fix in ERS documentation
Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability.
* Fix wall generator doc link and filename
Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency.
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* fixes and refactors linux build scripts
- build_linux.sh: fixes wrong AppImage build folder; refactors script; enhances help text
- harmonizes names: BuildLinux.sh and BuildLinuxImage.sh
- fixes file permissions: cmake inherits .in-file permission; removes chmod 755 in scripts
- linux.d/debian: removes false positive error message
- updates documentation
* enables ANSI-colored output for GNU or Clang
* build_linux.sh: adds -p flag to disable PCH for boosting ccache hit rate
* Allow compilation on distributions based on Ubuntu/Debian (#8625)
* build_linux.sh: takes over changes from BuildLinux.sh
* CMakeLists.txt: removes leftovers, enables ANSI-colored output
* CMakeLists.txt: fixes issue where FORCE_COLORED_OUTPUT was not respected form environment (introduces -C cli arg)
* merges 5df4275: Make it easy to pass extra build args to deps and orca in BuildLinux.sh (#9648)
* How to wiki
* Local images + pressure-advance realocation
* fill patterns WIP
+ Patch Until they fix this: https://github.com/orgs/community/discussions/118296
* Wiki images update 8fff1ca
Updated images with new style from commit 8fff1ca (pr: #9797)
* Internal Wiki Links + standardization
* Update Flow Calibration image
Co-Authored-By: Dowsha3d <216038220+dowsha3d@users.noreply.github.com>
* Seam wiki merge
* Updated Wiki Home
* MD Final lines
* How to index
---------
Co-authored-by: Dowsha3d <216038220+dowsha3d@users.noreply.github.com>
* chore: update how to build doc
* chore: add how to validate profiles doc
* remove old build info from readme.md
* fix: typo
* fix: typo
* chore: minor fix
* fix: typo
* chore: minor fix
* chore: minor fix
* chore: remove lfs
* fix: note 2 procedure for repair build
* fix: update CMake installation instructions for macOS to specify version 3.31.x
* fix: clarify CMake installation instructions for macOS and remove outdated commands
* fix: enhance documentation for profile structure and templates in OrcaSlicer
* fix: update profile validation documentation and remove obsolete guide
* chore: update path for building on mac
Add social media links to the project so people can follow the **real** social media accounts.
Additional context: There are many fake accounts, and this addition to the `README.md` helps users determine which accounts are real. Adding the links will protect users and the OrcaSlicer project.
Remove 'www' subdomain from official link.
With 'www.orcaslicer.com' creates certificate warnings, and ultimately redirects to 'orcaslicer.com' anyway.
* Build script improvements.
Add NDEBUG for non-debug MacOS builds. I don't understand why, but on my system Release and RelWithDebugInfo builds were not defining NDEBUG, resulting in failing asserts and other sanity checks.
Add -jN flag to BuildLinux.sh. On my 4-core 8GB RAM system, passing -j4 allows building without a swap storm.
Improve README.md description of building on macOS.
* Merge branch 'main' into bug/macos-ndebug
* Merge branch 'main' into bug/macos-ndebug
* Merge branch 'SoftFever:main' into bug/macos-ndebug
* Improve CMake syntax. Mention Mac path to app.
* Merge branch 'main' into bug/macos-ndebug
A trivial amendment to the initial graphics location to correct it from that of another fork, plus some trivial text edits to smooth reading.
Added a small text to encourage others to report spammy sites to the engines to have them eventually culled.
* Update DockerBuild.sh
Ensure that the X11 server allows connections from the Docker container.
* Update DockerBuild.sh
Removed fix for X11. Will add to DockerRun.sh
* Update DockerRun.sh
Added help comment to fix and ensure that your X11 server allows connections from the Docker container.
* linxu build with docker in readme
Add build on linux with docker section
* Update README.md
* Update README.md
* Update README.md
remove low ram thing
* Update Dockerfile
---------
Co-authored-by: samthebest699 <106000727+samthebest699@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Delete Readme.txt
Not in use
* Update SECURITY.md
Formatted and little changes made
* Update README.md
Improved format and texts, insert image at the top
* Wiki home page fix links and readme update to link to wiki
* Update README.md
* Fixed developer reference links
* Update linkage from slicer settings to Wiki for layer height, line width and seam settings
* adaptive PA documentation
* Update adaptive-pressure-advance.md
* updated screenshots
* formatting
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Include adaptive PA link
