rtyr
0b4720338f
Merge pull request #5968 from pmjdebruijn/creality_max
...
Creality CR-6 Max / CR-10 Max / etc
2021-02-09 09:19:40 +01:00
rtyr
310531d2db
Updated Kossel bed textures.
2021-02-08 23:43:21 +01:00
rtyr
1d0484a25d
Anycubic 0.0.7 Updated start g-code
2021-02-08 23:41:13 +01:00
Pascal de Bruijn
d135bd86de
creality.ini: Add Extrudr GreenTEC Pro filament
2021-02-08 17:07:41 +01:00
Pascal de Bruijn
7f925e700b
creality.ini: add experimental support for CR-X (Pro)
2021-02-07 16:45:14 +01:00
Pascal de Bruijn
723e0b6e9d
creality.ini: Add safety zone for CR-10 S Pro
2021-02-07 15:43:48 +01:00
Pascal de Bruijn
8feef8bcf0
creality.ini: add vendor associated color for Das Filament
2021-02-07 15:03:09 +01:00
Pascal de Bruijn
8ff82cc1d2
creality.ini: increase CR-6/CR-10 Max retract_length slightly
2021-02-07 13:48:28 +01:00
Pascal de Bruijn
622664ef8e
creality.ini: Add CR-10 Max
2021-02-05 17:28:44 +01:00
Pascal de Bruijn
6373c7f1cb
creality.ini: Add CR-6 Max and add safety border to CR-10 S4
2021-02-04 18:41:17 +01:00
Pascal de Bruijn
a4a465b9a6
creality.ini: Creality CR-6 SE improvements
2021-02-03 17:34:06 +01:00
rtyr
e52efe48b0
Creality CR-6 SE thumbnail
2021-02-02 11:40:58 +01:00
rtyr
c8e5277f0c
Updated print temperature for Das Filament PLA
...
https://github.com/prusa3d/PrusaSlicer/issues/5693
2021-02-01 21:22:30 +01:00
rtyr
a2a0a86138
Creality 0.0.13
2021-01-29 10:44:35 +01:00
rtyr
31e7a60494
Creality - bumped up version to 0.0.13
2021-01-29 10:43:34 +01:00
rtyr
3009b314c8
Merge pull request #5908 from pmjdebruijn/creality_4
...
creality.ini various improvements
2021-01-28 23:48:36 +01:00
rtyr
0168fc612a
Updated bed_texture for Anycubic Kossel
2021-01-28 23:38:45 +01:00
rtyr
7b3a06fd05
Updated Anycubic Kossel bed models.
2021-01-28 23:35:38 +01:00
rtyr
c9ebc18a10
Added Anycubic Kossel texture
...
from https://github.com/prusa3d/PrusaSlicer/pull/5747
2021-01-28 23:34:43 +01:00
Pascal de Bruijn
1f9fe92720
creality.ini: hide CR-6 SE until next release
2021-01-28 18:14:19 +01:00
Pascal de Bruijn
ba87613454
creality.ini: update start_gcode/end_gcode comments
2021-01-28 18:13:45 +01:00
Pascal de Bruijn
ba6a40bcce
creality.ini: add CR-6 SE
2021-01-27 17:42:32 +01:00
Pascal de Bruijn
f2a624007b
creality.ini: enable more filaments by default
2021-01-27 17:34:38 +01:00
Pascal de Bruijn
5fa4880eac
creality.ini: add comments
2021-01-27 17:15:43 +01:00
Pascal de Bruijn
ed04eb1f20
creality.ini: remove superfluous printer_variant from ENDER3V2
2021-01-27 17:04:13 +01:00
Pascal de Bruijn
93da13b0a3
creality.ini: set slowabl to 120C to match fastabl
2021-01-25 21:06:50 +01:00
Pascal de Bruijn
c27ab57c18
creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE
...
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.
this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae
creality.ini: Move print head further up for low prints
...
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
2021-01-25 17:22:13 +01:00
Pascal de Bruijn
78354ee991
creality.ini: reduce prime line in start_gcode
...
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode
the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c
creality.ini: universal end_gcode improvement
...
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959
creality.ini: Ender3 V2 naming consistency
2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08
creality.ini: raise Das Filament PLA bed temp
...
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.
So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1
creality.ini: improve nonabl start_gcode
2021-01-23 19:09:29 +01:00
rtyr
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles.
2021-01-08 10:57:41 +01:00
rtyr
250ef23fd5
Updated 0.0.12 description
2021-01-08 09:44:09 +01:00
rtyr
ecb85b2166
Added Ender 3-V2.
...
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702 .
2021-01-08 09:42:01 +01:00
rtyr
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A
2021-01-06 20:35:37 +01:00
rtyr
615356b69c
Ender3V2 thumbnail
2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/5582
2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers
2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro
2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10
...
Parameter consistency improvements. Enabled conservative elephant foot compensation.
2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10
2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469
Creality.ini: default to Generic PLA, and move defaults to common printer section
2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777
creality.ini: enable conservative elefant_foot_compensation
...
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.
A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.
And I'd prefer to undercompensate as opposed to overcompensate
as a default.
2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93
Creality.ini: improve parameter consistency
2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5
2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6
2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format.
2020-12-08 22:12:15 +01:00
