* Calculate extrusion width %s as a function of nozzle width, not layer height
* handled more width conversions
* more missing percent handling
* even more missed percent handling
* even more more extrusion % handling
* some fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Cantilever detection should be done layer by layer, instead of using
merged_poly of clusters.
Jira: STUDIO-2198
Change-Id: Ifea017fc4c13425a944ee80f7dedb603a8e14cc2
(cherry picked from commit 0803a439a458ffeb9c6d91e90344a5b78794a6bd)
1. Fix sharp tail detection in normal support.
The not operator in front of overlaps was missing.
2. Fix bridge removal.
After adopting Prusa's smart bridge direction detection, the bridge
angle may be pi, so our previous method (comparing angle to 0 and pi/2)
was not right. Now we simply check if the bridge direction normal vector
is aligned to x-axis or y-axis.
Change-Id: I4e1fd937e432aca97cdd374ba66a0d869794126e
(cherry picked from commit c0d82003a5e4c44345219294072c54051fc5711a)
1. improve sharp detection for small regions.
When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
Only popup warning for sharp tail and large cantilever (longer than 6mm).
Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
1. Parallelize the majority of overhang detection, leaving only a small
part of sharp tail detection as sequential. This strategy makes
is_support_necessary 10 times faster.
2. Use the overlaps function to detect overlapping, instead of using
intersection().empty()
3. Control the max recursion depth to prevent crashing due to too deep
recursion.
Jira: STUDIO-2445, STUDIO-2458
Change-Id: I35283da3e4a22d7afe251b804ce30b90a9d754df
(cherry picked from commit 1a6fedd1a0c82906f1807234ea1b816247ca6fd7)
JIRA: studio-2274
Now support enforcer on vertical faces function is invalid. Previous
enhancement of support enforcer on vertical faces brounght more conficts
than benefits.
Change-Id: Icbb0df3995d8ac8b3c22dda1bd4615da78af963b
(cherry picked from commit bca003cbc35791838484afe4032276be8fa91db0)
A bottome surface is detected as stBottom only if:
1. has support, top z distance=0 (soluble material), auto support
2. for normal(auto), bridge_no_support is off
3. for tree(auto), interface top layers=0, max bridge length=0, support_critical_regions_only=false (only in this way the bridge is fully supported)
Note:
Since now the surface type depends on more parameters, changing them will trigger re-slicing and making the whole process slower.
github issues: 1253
Change-Id: I0fe719e0dbf7147206008c8726dd9c7be2b19226
(cherry picked from commit d4490afa6b9e4fbb583033a125bbebb50dc5f0bb)
FIX: crush when slicer multi-color model
the root cause is a mismatch between the dimensions of flush matrix and the number of extruders
Change-Id: I3a4ca706cb24d9e5d33969b9e6f5b288e71bb8f2
(cherry picked from commit 7399037eaacdfd7d8407667a2e5a097757265254)
FIX: fix crash when switch printer
Change-Id: I7632689c5df07df0222a5fa529993e114d7c5b08
Signed-off-by: Stone Li <stone.li@bambulab.com>
ENH:close the amsmapping dialog when exit seletmachine dialog
Change-Id: Ib49b1f9d08267c56b34d867edb40f287114479e1
ENH:no longer hide the unload button when connected to AMS
Change-Id: I62c7195d590827bd189c6e6886e95c2cf755e203
FIX: fix the slicing result different issue
when move volume in objects copied from other object
the result is not correct
Change-Id: Ieebc586f11c42429902d653e871c038d096783e8
FIX: support blocker not work on vertical+horizontal faces
Jira: STUDIO-2088
Change-Id: I6803e8e90ebcc4c67d81473f60fdf97929011e12
(cherry picked from commit 738800c5af48ab8a2cde40b6f2b3c48a88bfee8b)
FIX:fixed send print will crash when resources path is chinese path
Change-Id: Ie4a5161f853dca691bd69e5695720d99148a0134
* Changes:
Improve precise wall
Port PS2.6 overhang slowdown feature
Implement overhang fan for new overhang slowdown algo
Add option to switch between classic/new overhang slowdown implementation
Set Arachne as default engine
Small adjustment of temp calibration range
turn off small perimeter by default
Small UI tweaks
Change default top_surface_pattern to monotonic
Fine tune jerk
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Disable optimizations for RelWithDebInfo
Signed-off-by: SoftFever <softfeverever@gmail.com>
* fix an issue that max volumetirc/vfa calibration can't send to print
Signed-off-by: SoftFever <softfeverever@gmail.com>
#322
* fix build errors
Signed-off-by: SoftFever <softfeverever@gmail.com>
---------
Signed-off-by: SoftFever <softfeverever@gmail.com>
1. fix unsupported cantilever was not warned. We need to set support
type to stTreeAuto in is_support_necessary() to fully utilize the
power of feature detection.
2. fix tree support not generated on non-first plate.
Change-Id: I5b8aa827c9d62df0119db4e8e9212f33ce75ddaa
(cherry picked from commit 60f21b6fcb45fe56f7fc867a7fcad433282bc055)
Support layers should be released in is_support_necessary.
Jira: STUDIO-2120
Change-Id: Id1c6fa2d8635e55be745095408dfbac38a25efa6
(cherry picked from commit f911e8d084c4fa273f8c9211112fa2f83515cfb1)
Use tree support to detect if there are sharp tails and so on.
Jira: STUDIO-1898
Change-Id: I148e14ca4024849875133a646a8fdd36c265b2fb
(cherry picked from commit bc74015d45e96e409d34d611876e3a24e289e029)
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Refer to prusa and enable arachne for wall.
Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.
Provide option for user to choose.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Add paint-on support on vertical faces of slender rods
ENH STUDIO-970/1285
FIX STUDIO-1183
Change-Id: I36b398f9c1c1341bce080ec3d454dcc6e6f991e8
(cherry picked from commit 65ee2c8d74284b21bfd34a1059e2005998d749c5)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
