If an object has only one empty layer, error will encount
during grouping volumes
studio-2602
Change-Id: I25871b8cc8e4772c347c615db346875a9658db71
(cherry picked from commit 78b7e7706f6c8e7e86f4bd2e8daab7036499ced2)
1. cache the first layer group cache data for brim
2. fix some crash under debug mode when app exits
Change-Id: I81d716564af414353e9dfeed42e5f4eef08b2d6f
(cherry picked from commit a6ecdaed6f63f1c5c41fd343f72165fe27fda9d3)
1. Only draw infill in normal nodes of hybrid support.
Previously when hybrid support was selected, all nodes would have
infill including the circle nodes which don't need infill. Now we draw
infill only when there are normal nodes.
2. Move remove_bridge after small overhang removal because the trimmed
bridge may be detected as small overhangs.
3. Only split circle nodes in draw_circles to prevent floating circles.
4. Fix the issue where tree support infills may not be aligned,
which is caused by the changing spacing of filler.
5. Fix a bug where lightning infill in tree support may crash.
Note: it is still not prepared to set lightning infill as default,
as for some models the generation time of lightning infill is still
too long.
Change-Id: I556e5097041d09afae1e2957d4dc9914d4610149
(cherry picked from commit 4c0849a81b60cde0c3b8ca54f03f63ea7c62dcd9)
1. Fix sharp tail detection in normal support.
The not operator in front of overlaps was missing.
2. Fix bridge removal.
After adopting Prusa's smart bridge direction detection, the bridge
angle may be pi, so our previous method (comparing angle to 0 and pi/2)
was not right. Now we simply check if the bridge direction normal vector
is aligned to x-axis or y-axis.
Change-Id: I4e1fd937e432aca97cdd374ba66a0d869794126e
(cherry picked from commit c0d82003a5e4c44345219294072c54051fc5711a)
1. improve sharp detection for small regions.
When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
Only popup warning for sharp tail and large cantilever (longer than 6mm).
Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
Allow user to set top/Bottom_z_distance under variable layer height.
Fix the bug STUDIO-2454
Change-Id: I026098a4df7cfa01f87a6802e2c787fcfd6df3ee
(cherry picked from commit 6e933acec7cde705f176937038ce307bc276cf5f)
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
1. old 3mf judge logic improvement
2. some 3mf doesn't include gcode and geometry, treat it as empty
project
Change-Id: I9b3f3d04e32ae6ff273ec1ae04c04ac6329487f0
the processes are parallized via tbb
the patch 12311 ENH: remove trim_overlap should be used
Change-Id: I226dc171daadebd81b8d3ae013b08c71b91fb392
(cherry picked from commit eaa2e7997a59f43175d5af430269127471e40cbb)
Similar to tree support, make as many steps parallel as possible.
Jira: STUDIO-2525
Change-Id: Iee310bbf6911d8d3e4262ee8ed6bd133d09670a9
(cherry picked from commit 3798f1a3ecb85bbfb81925b3702fb4384e18994d)
1. tree support style default to Tree Hybrid
2. fix an assert bug with MedialAxis::build:
assert(polyline.width.size() == polyline.points.size() * 2 - 2)
This is caused by the incorrect clear function of ThickPolyline.
Change-Id: I8d6507ad366d253493e2749e0cbac8d3d837ee8a
(cherry picked from commit bd31e962c11e82005944bef40b17471075e79898)
1. Parallelize the majority of overhang detection, leaving only a small
part of sharp tail detection as sequential. This strategy makes
is_support_necessary 10 times faster.
2. Use the overlaps function to detect overlapping, instead of using
intersection().empty()
3. Control the max recursion depth to prevent crashing due to too deep
recursion.
Jira: STUDIO-2445, STUDIO-2458
Change-Id: I35283da3e4a22d7afe251b804ce30b90a9d754df
(cherry picked from commit 1a6fedd1a0c82906f1807234ea1b816247ca6fd7)
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
This is fix for STUDIO-2079 that slicer may hang
when generated archimedean chords pattern lines.
Thanks prusa.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I923c1ef48f093b2ab9576cb04beb4787c903ca00
