126 commits

Author	SHA1	Message	Date
Alessandro Ranellucci	22f8d57b36	Memory optimizations broke thin walls	2012-05-19 19:40:51 +02:00
Alessandro Ranellucci	b246480535	Massive reduction of memory usage (down to one third).	2012-05-19 17:57:38 +02:00
Alessandro Ranellucci	aa9563f00b	More constants, less strings => ess memory usage	2012-05-19 15:40:11 +02:00
Alessandro Ranellucci	2d67d6b0b6	Restore 100% flow for support material	2012-05-17 22:57:59 +02:00
Alessandro Ranellucci	2a6ad2f3f7	Bugfix: removed warnings. #365	2012-05-13 22:56:40 +02:00
Alessandro Ranellucci	d58a741d99	Put layer number in G-code comments. #327	2012-05-01 15:06:19 +02:00
Alessandro Ranellucci	d8b8470d54	Retract before changing tool. #319	2012-05-01 14:44:52 +02:00
Alessandro Ranellucci	3ed5171d20	Take bottom layer speed ratio into account when estimating layer time. #334	2012-05-01 11:48:22 +02:00
Alessandro Ranellucci	e7558ce16c	Bugfix: wrong flow amount for solid layers. #317	2012-04-17 09:29:41 +02:00
Alessandro Ranellucci	285caffa9c	Omit G92 if No Extrusion	2012-04-16 20:06:53 +02:00
Alessandro Ranellucci	8d851c24a9	Increase the flow rate for support material	2012-04-16 14:18:07 +02:00
Alessandro Ranellucci	96d5e513b8	Rename $Slic3r::resolution to $Slic3r::scaling_factor	2012-04-16 14:05:38 +02:00
Alessandro Ranellucci	d51ba94e8a	Remove XXX from dependencies	2012-04-16 14:03:36 +02:00
Alessandro Ranellucci	e3a9adae4d	Bugfix: use P instead of S for Mach3 for M106 too. #286	2012-03-27 10:26:10 +02:00
Alessandro Ranellucci	4d71ca3071	Enable G0 automatically for Mach3. #266	2012-03-26 12:22:12 +02:00
Alessandro Ranellucci	1a06e35687	New option to specify G-code to be used at layer change. #279	2012-03-26 12:14:15 +02:00
Alessandro Ranellucci	3cf5f86ce0	Avoid G92 for Mach3. #220	2012-03-04 11:49:04 +01:00
Alessandro Ranellucci	c7006fed26	Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245	2012-03-03 22:16:38 +01:00
Alessandro Ranellucci	170d29a789	New --cooling option and checkbox to enable/disable fan and cooling control	2012-02-25 21:56:36 +01:00
Alessandro Ranellucci	1d0a852679	Cooling and fan control. #110	2012-02-25 21:01:00 +01:00
Alessandro Ranellucci	c3fc6ee66b	Fix regression introduced with f2e1fe5241	2012-02-21 20:16:03 +01:00
Alessandro Ranellucci	94a2585b97	Dual extruder for support material	2012-02-19 17:02:49 +01:00
Alessandro Ranellucci	7b67fae686	Support material	2012-02-19 12:03:36 +01:00
Alessandro Ranellucci	e0e2023a5a	Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179	2012-02-19 10:48:58 +01:00
Alessandro Ranellucci	74c71b4ef2	Acceleration control. #185	2012-02-10 14:53:44 +01:00
Alessandro Ranellucci	3e65af7457	Revert "New First layer flow ratio option. #182" ... This reverts commit 99ef0865bb.	2012-01-30 14:51:05 +01:00
Alessandro Ranellucci	99ef0865bb	New First layer flow ratio option. #182	2012-01-30 14:25:14 +01:00
Alessandro Ranellucci	eb33c03926	Bugfix: flow wasn't adjusted for first layer according to its height setting. #182	2012-01-30 14:03:12 +01:00
Alessandro Ranellucci	f1b1454b36	Loops were not closing well	2012-01-21 11:51:31 +01:00
Alessandro Ranellucci	1c7564e4a4	Thin walls. #24	2011-12-30 17:17:37 +01:00
Alessandro Ranellucci	caf41f07dd	Output required filament length and volume to command line and to the gcode file itself	2011-12-20 15:29:15 +01:00
Alessandro Ranellucci	d63eabcfa5	Clip less from loops to avoid gaps	2011-12-17 19:54:35 +01:00
Alessandro Ranellucci	1e6ecd9eab	Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.	2011-12-17 19:52:34 +01:00
Alessandro Ranellucci	8e04d763f4	Don't increase flow for overlapping purposes when bridging	2011-12-16 10:53:22 +01:00
Alessandro Ranellucci	d346bc02cc	Comments are now disabled by default, new --gcode-comments option to enable them	2011-12-14 19:49:21 +01:00
Alessandro Ranellucci	56691c1dea	Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112	2011-12-13 17:34:31 +01:00
Alessandro Ranellucci	0a74e068a3	Merge branch 'infill-overlap'	2011-12-08 10:53:24 +01:00
Alessandro Ranellucci	d9a70ea80d	Customizable overlap ratio (it defaults to 0.15 now)	2011-12-08 10:53:07 +01:00
Alessandro Ranellucci	d813aea59a	Don't slow down retractions on bottom layer. #101	2011-12-08 10:28:23 +01:00
Alessandro Ranellucci	53bc9c7421	Customizable speed for small perimeters. #60	2011-12-04 20:50:03 +01:00
Alessandro Ranellucci	0aff5fab24	Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89	2011-12-04 16:24:46 +01:00
Alessandro Ranellucci	52c9897eda	New --extrusion-axis option; removed --no-extrusion	2011-12-01 22:34:21 +01:00
Alessandro Ranellucci	e99c9f9e5f	Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77	2011-12-01 22:04:23 +01:00
Alessandro Ranellucci	92e86a2259	Bugfix: plate was lifted even when retracting for Z change	2011-11-28 19:59:39 +01:00
Alessandro Ranellucci	3ad9ed74ae	New --solid-infill-feed-rate option. #68	2011-11-28 19:11:26 +01:00
Alessandro Ranellucci	4cdd0f6fd0	Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.	2011-11-27 10:12:44 +01:00
Alessandro Ranellucci	8e7d00bb34	Avoid unnecessary retractions during infill. #29	2011-11-26 17:01:00 +01:00
Alessandro Ranellucci	25c85aada5	Renamed "filament packing density" to "extrusion multiplier". Same values. #4	2011-11-25 11:15:20 +01:00
Alessandro Ranellucci	3c0ea0b57f	New --extrusion-width-ratio option. #8	2011-11-25 11:10:35 +01:00
Alessandro Ranellucci	47d347e1b2	Revert "Disable retraction when moving over infill space. #29" ... This reverts commit d6ed9c6f34.	2011-11-24 12:53:09 +01:00