Commit graph

71 commits

Author SHA1 Message Date
SoftFever
a6cd32fe72 Allow user to turn adaptive layer height for tree support.
Signed-off-by: SoftFever <softfeverever@gmail.com>
#257
2023-03-06 19:57:09 +08:00
SoftFever
c58ed92da1 Support filament shrinkage
Ported from SuperSlicer

Signed-off-by: SoftFever <softfeverever@gmail.com>
#360
2023-03-05 17:23:17 +08:00
Jason M-H
d535d70d03
Add sparse / internal solid infill accel controls (#382)
* Add sparse / internal solid infill accel controls

* infill accel control as %

* update tooltip

* update to abs value
2023-03-04 17:52:46 +08:00
SoftFever
30bb644e2b bridge accel
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-02-18 20:48:51 +08:00
SoftFever
e9613e971d
1.4.5 features (#319)
* Changes:
Improve precise wall
Port PS2.6 overhang slowdown feature
Implement overhang fan for new overhang slowdown algo
Add option to switch between classic/new overhang slowdown implementation
Set Arachne as default engine
Small adjustment of temp calibration range
turn off small perimeter by default
Small UI tweaks
Change default top_surface_pattern to monotonic
Fine tune jerk

Signed-off-by: SoftFever <softfeverever@gmail.com>

* Disable optimizations for RelWithDebInfo

Signed-off-by: SoftFever <softfeverever@gmail.com>

* fix an issue that max volumetirc/vfa calibration can't send to print

Signed-off-by: SoftFever <softfeverever@gmail.com>
#322

* fix build errors

Signed-off-by: SoftFever <softfeverever@gmail.com>

---------

Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-02-17 23:09:18 +08:00
SoftFever
7fe5b84c41 more calibrations
precise wall
etc

Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-02-11 09:55:58 +08:00
SoftFever
fe9a2715e6
New feature: bridge density (#275)
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-02-02 00:43:36 +08:00
SoftFever
854470cfba wipe on loops
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-26 01:29:44 +08:00
Patrice Côté
bf782028ac
Option for klipper only: Adjustment of "accel_to_decel" (#220)
* Klipper option: Adjustment of "accel_to_decel"

Add option to automatically adjust accel_to_decel to 50% of chosen acceleration.

* allow variable accel_to_decel percentage

allow variable accel_to_decel percentage for klipper firmware
2023-01-24 21:33:34 +08:00
Patrice Côté
5692e02c54
Enable absolute/relative extrusion option on non BBL printers (#205)
Add the option to use non-relative extrusion in printer config screen. Some extruders do not play well with relative extrusion...

Remove reference to multi-extruder

Remove reference to multi-extruder

change g-code comment for M83 relative extrusion

changed comment for M83

Remove commented line of code

In this specific case, we delete the old line of code because it refers to a variable that was deleted from the rest of the code (RELATIVE_E_AXIS)
2023-01-24 13:02:52 +08:00
SoftFever
b7bdb65fd3 Add option to set jerk for infills
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-22 22:05:19 +08:00
SoftFever
8350895513 role_based_wipe_speed and wipe_speed
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-15 21:05:35 +08:00
SoftFever
594819ef9c seam gap parameter 2023-01-14 19:39:00 +08:00
Patrice Côté
540aa13e25
Add Post-processing (#159)
It is now possible to call external  post-process scripts
2023-01-12 19:42:31 +08:00
SoftFever
15b49bf856 Fix a bug that after load a project, printer connection info is missing
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-07 22:06:30 +08:00
SoftFever
0f04df2699 Support firmware retration and retract_restart_extra 2023-01-07 11:17:55 +08:00
SoftFever
7e1a2840e5 Set flowrate per object 2022-12-25 23:29:48 +08:00
SoftFever
45a00489ec fix crash when open filament setting dialog 2022-12-16 20:08:04 +08:00
SoftFever
bf8a9fee1f Merge branch 'master' into SoftFever
# Conflicts:
#	bbl/i18n/zh_cn/BambuStudio_zh_CN.po
#	resources/i18n/de/BambuStudio.mo
#	resources/i18n/en/BambuStudio.mo
#	resources/i18n/es/BambuStudio.mo
#	resources/i18n/fr/BambuStudio.mo
#	resources/i18n/hu/BambuStudio.mo
#	resources/i18n/nl/BambuStudio.mo
#	resources/i18n/sv/BambuStudio.mo
#	resources/i18n/zh_cn/BambuStudio.mo
#	resources/profiles/Creality.json
#	resources/profiles/Voron.json
#	resources/web/guide/3/index.html
#	src/libslic3r/AppConfig.cpp
#	src/libslic3r/GCode.cpp
#	src/libslic3r/GCode/GCodeProcessor.cpp
#	src/libslic3r/LayerRegion.cpp
#	src/libslic3r/Preset.cpp
#	src/libslic3r/Print.cpp
#	src/libslic3r/PrintConfig.cpp
#	src/libslic3r/PrintConfig.hpp
#	src/libslic3r/PrintObject.cpp
#	src/slic3r/GUI/AboutDialog.cpp
#	src/slic3r/GUI/BBLTopbar.cpp
#	src/slic3r/GUI/ConfigManipulation.cpp
#	src/slic3r/GUI/ConfigWizard.cpp
#	src/slic3r/GUI/GCodeViewer.cpp
#	src/slic3r/GUI/GUI_App.cpp
#	src/slic3r/GUI/GUI_Factories.cpp
#	src/slic3r/GUI/MainFrame.cpp
#	src/slic3r/GUI/Plater.cpp
#	src/slic3r/GUI/Tab.cpp
#	version.inc
2022-12-16 13:59:30 +08:00
salt.wei
6551b86230 ENH: enable arachne for wall
Refer to prusa and enable arachne for wall.

Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.

Provide option for user to choose.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
2022-12-15 04:38:15 -05:00
qing.zhang
fe4fc04eb8 ENH: add upward_compatible_machine to preset
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I489f3cc7f9fbd0de79861b71c47494b377ef1a16
2022-12-15 04:38:15 -05:00
yifan.wu
3b0f75bd4e FIX: fix a cherry-pick conflict error
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Ib8cc0598ec07fd204c3629206fb09939b7501215
2022-12-15 04:38:15 -05:00
zhimin.zeng
7dddb17d8a FIX: the P1P printer is not support smooth timelapse
Change-Id: I0e9faf9d9c63d6541189724813fd803c8522a26b
(cherry picked from commit 84edf0b3eeb84c65990926ab8fc69b0f51ce6f3d)
2022-12-15 04:38:15 -05:00
Arthur
95ed039879 ENH: simplify support options and fix a tree sup bug
1. add default support base pattern (lightning for tree support,
   rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
   absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
   removed now)
5. fix the issue that tree support base may grow above interface by
   adding virtual nodes (distance_to_top<0).

Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
2022-12-15 04:38:15 -05:00
MusangKing
d1e4cb430c NEW: Add "Support xy expansion distance" setting
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.

Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
2022-12-15 04:38:15 -05:00
MusangKing
2a8fe9ec54 NEW: Open "Bottom Z distance" setting for users
Users can set distance between support bottom contacts and object
once enable normal/tree support.

Jira: STUDIO-1383

TODO:Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.

Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
2022-12-15 04:38:15 -05:00
salt.wei
588f18ac58 ENH: improve archor of internal bridge
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.

This option controls how many lower layers generate
loop path.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
2022-12-15 04:33:48 -05:00
zhimin.zeng
118a13200b FIX: variable layer height prompt an error when enable the prime tower
Change-Id: I80b3965d25a9e1faaff1298f42b171660974463e
(cherry picked from commit a519f82ce7c1b169ad995d10a28e873e133f2373)
2022-12-15 04:33:48 -05:00
salt.wei
c1599aa138 ENH: add back even-odd mode
Add back even-odd mode to support slicing 3DLabPrint
airplane models

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
2022-12-15 04:33:48 -05:00
salt.wei
35edf03eca ENH: add "ensure_vertical_shell_thickness" back
See the new requirement of the latest update at
github issue #317

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
2022-12-15 04:33:48 -05:00
qing.zhang
6ca5df9118 NEW: add nozzle_hrc and filament required hrc
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed

either of it be zero means use other printers
or user want to print it anyway

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
2022-12-15 04:33:48 -05:00
salt.wei
11f74c21d3 ENH: add bridge direction option
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.

This is handling for github issue #340

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
2022-12-15 04:33:48 -05:00
salt.wei
c61fd447c9 ENH: fix duplicate setting name
As title.

Test multi-color 3MF loading OK

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9b2791f8d020a051f934cda3027293a948b07088
2022-12-15 04:33:48 -05:00
qing.zhang
4d8eefb1ea ENH: open the filament_color preset
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idca08be5401aad1672adc46f9604338e3456f519
2022-12-15 04:33:48 -05:00
salt.wei
5e024f75b9 ENH: support specific acceleration for outer wall
So we can set lower acceleration for outer wall now.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
2022-12-15 04:33:48 -05:00
liz.li
0b84ca62bf NEW: add custom printer config wizard
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-12-15 04:33:48 -05:00
SoftFever
6fb941cf4c Merge branch 'master-remote' into SoftFever
# Conflicts:
#	resources/profiles/Creality.json
#	resources/profiles/Voron.json
#	version.inc
2022-11-05 11:26:59 +08:00
SoftFever
78b9fcb71b filter out tiny gaps 2022-11-04 16:44:43 +08:00
Arthur Tang
5544e9602c FIX: rewrite per-object printing order logic
1. Previous logic can't guarantee left-to-right printing order, so
   toolhead may crash on the right side. In the new algorithm printing
   order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
   up), not including right, otherwise collision may happen on bottom or
   up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
   overlap better.

Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
2022-11-01 20:52:23 +08:00
SoftFever
dd77599dea small perimeter threshold 2022-10-24 22:35:40 +08:00
SoftFever
397e0f0a29 Merge branch 'SoftFever' into feature/small_perimeter 2022-10-24 14:53:58 +08:00
SoftFever
166832cd94 add back small perimeter support 2022-10-24 14:47:18 +08:00
SoftFever
e65ba104dd support changing thumbnail size 2022-10-23 23:00:46 +08:00
SoftFever
35455e6533 Merge branch 'master-remote' into feature/merge_remote_1.3
# Conflicts:
#	bbl/i18n/zh_cn/BambuStudio_zh_CN.po
#	resources/i18n/zh_cn/BambuStudio.mo
#	resources/profiles/Voron.json
#	resources/profiles/Voron/filament/Voron Generic ABS.json
#	resources/profiles/Voron/filament/Voron Generic ASA.json
#	resources/profiles/Voron/filament/Voron Generic PA-CF.json
#	resources/profiles/Voron/filament/Voron Generic PA.json
#	resources/profiles/Voron/filament/Voron Generic PC.json
#	resources/profiles/Voron/filament/Voron Generic PETG.json
#	resources/profiles/Voron/filament/Voron Generic PLA-CF.json
#	resources/profiles/Voron/filament/Voron Generic PLA.json
#	resources/profiles/Voron/filament/Voron Generic PVA.json
#	resources/profiles/Voron/filament/Voron Generic TPU.json
#	resources/profiles/Voron/filament/fdm_filament_abs.json
#	resources/profiles/Voron/filament/fdm_filament_asa.json
#	resources/profiles/Voron/filament/fdm_filament_common.json
#	resources/profiles/Voron/filament/fdm_filament_pa.json
#	resources/profiles/Voron/filament/fdm_filament_pc.json
#	resources/profiles/Voron/filament/fdm_filament_pet.json
#	resources/profiles/Voron/filament/fdm_filament_pla.json
#	resources/profiles/Voron/filament/fdm_filament_pva.json
#	resources/profiles/Voron/filament/fdm_filament_tpu.json
#	resources/profiles/Voron/machine/Voron 0.1 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 0.1.json
#	resources/profiles/Voron/machine/Voron 2.4 250 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 250.json
#	resources/profiles/Voron/machine/Voron 2.4 300 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 300.json
#	resources/profiles/Voron/machine/Voron 2.4 350 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron 2.4 350.json
#	resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 250.json
#	resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 300.json
#	resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json
#	resources/profiles/Voron/machine/Voron Trident 350.json
#	resources/profiles/Voron/machine/fdm_klipper_common.json
#	resources/profiles/Voron/process/0.08mm Extra Fine @Voron.json
#	resources/profiles/Voron/process/0.12mm Fine @Voron.json
#	resources/profiles/Voron/process/0.15mm Optimal @Voron.json
#	resources/profiles/Voron/process/0.20mm Standard @Voron.json
#	resources/profiles/Voron/process/0.24mm Draft @Voron.json
#	resources/profiles/Voron/process/0.28mm Extra Draft @Voron.json
#	resources/profiles/Voron/process/fdm_process_voron_common.json
#	src/libslic3r/Preset.cpp
#	src/libslic3r/PrintConfig.cpp
#	src/libslic3r/PrintConfig.hpp
#	src/libslic3r/PrintObject.cpp
#	src/slic3r/GUI/BackgroundSlicingProcess.cpp
#	src/slic3r/GUI/Field.cpp
#	src/slic3r/GUI/GLToolbar.cpp
#	src/slic3r/GUI/GLToolbar.hpp
#	src/slic3r/GUI/MainFrame.cpp
#	src/slic3r/GUI/MainFrame.hpp
#	src/slic3r/GUI/NotificationManager.cpp
#	src/slic3r/GUI/PhysicalPrinterDialog.cpp
#	src/slic3r/GUI/PhysicalPrinterDialog.hpp
#	src/slic3r/GUI/Plater.cpp
#	src/slic3r/GUI/Plater.hpp
#	src/slic3r/GUI/PrintHostDialogs.cpp
#	src/slic3r/GUI/PrintHostDialogs.hpp
#	src/slic3r/Utils/PrintHost.cpp
2022-10-20 23:12:00 +08:00
Stone Li
ee62ffcc7d NEW: add confirm dialog after check conditions
confirm to check printer model and slice warnings

Change-Id: I07a272fda1a5e2ebc0f4e106815fe07da5aaa4df
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-10-20 19:34:37 +08:00
salt.wei
b8d9a2fdf3 ENH: add custom gcode back
Add custom gcode back, which can be inserted in
gcode viewer layer slider.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
2022-10-20 19:34:37 +08:00
Stone Li
91d5ba2870 NEW: support send gcode to third-party printer
Thanks SoftForever for your works to support
sending a gcode file to third-party printer

Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
2022-10-20 19:34:37 +08:00
SoftFever
be75bfaacb z lift type 2022-10-19 17:02:19 +08:00
SoftFever
e131938cac wip 2022-10-16 16:39:45 +08:00
SoftFever
e69a6d6ebd bridge angle 2022-10-14 17:58:23 +08:00